Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.5 LAccepted-AOC PWD S CONTRACTOR KUNHALINKIL HOUSE MARKET ROAD NILESHWAR | L1 | Accepted-AOC L HENCE ACCEPTED | |
| 2 | L2₹1.5 L+₹3,404.17 (2.33%)Rejected-AOC | L2 | Rejected-AOC L2 HENCE REJECTED | |
| 3 | L3₹1.6 L+₹13,737.49 (9.42%)Rejected-Finance | L3 | Rejected-Finance L3 HENCE REJECTED | |
| 4 | L4₹1.7 L+₹23,327.85 (16.0%)Rejected-Finance THOTTIYIL CHITHARI RAVANESHWARAM | KERALA | L4 | Rejected-Finance L4 HENCE REJECTED |
| Sl No | Description | Qty | Unit | SHAMEER A L1 | SUKESH M L4 | Mohammed Ali M L3 | AJITH KUMAR M L2 |
|---|---|---|---|---|---|---|---|
| 1.00ANGANVADI | |||||||
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 0.16 | cum | 290 ₹46.98 Lowest | 338.41 ₹54.82 | 319.22 ₹51.71 | 298.55 ₹48.37 |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.16 | cum | 7,475 ₹1,210.95 Lowest | 8,688.66 ₹1,407.56 | 8,196.01 ₹1,327.75 | 7,665.14 ₹1,241.75 |
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 278.15 | kg | 185 ₹51,457.38 Lowest | 217.25 ₹60,427.65 | 204.93 ₹57,000.87 | 191.66 ₹53,309.85 |
| 1.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 51.24 | sqm | 682 ₹34,945.68 Lowest | 792.24 ₹40,594.38 | 747.32 ₹38,292.68 | 698.91 ₹35,812.15 |
| 1.00 | 15.13.1:Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50 metres lead:Of area 3 sq. metres and below | 2 | each | 120 ₹240 Lowest | 139.52 ₹279.04 | 131.61 ₹263.22 | 123.08 ₹246.16 |
| 1.01 | 50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood | 0.11 | cum | 96,000 ₹10,464 Lowest | 1,11,445.34 ₹12,147.54 | 1,05,126.39 ₹11,458.78 | 98,317.08 ₹10,716.56 |
| 1.01 | 50.9.2.1:Providing and fixing paneled and glazed shutters for doors, windows and clerestory windows, 35 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin - charge using Anjili/ Jack wood | 1.56 | sqm | 2,930 ₹4,570.8 Lowest | 3,400.4 ₹5,304.62 | 3,207.6 ₹5,003.86 | 2,999.83 ₹4,679.73 |
| 1.01 | 50.9.4.1:Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality Anjili/ Jack wood | 1.43 | sqm | 2,420 ₹3,455.76 Lowest | 2,810.79 ₹4,013.81 | 2,651.42 ₹3,786.23 | 2,479.68 ₹3,540.98 |
| 1.01 | 50.9.6.1:Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Using Anjili wood / jack wood 30 mm thick shutters | 1.63 | sqm | 3,390 ₹5,532.48 Lowest | 3,935.87 ₹6,423.34 | 3,712.71 ₹6,059.14 | 3,472.22 ₹5,666.66 |
Tender Value
₹1.7 L
EMD Value
₹4,228
Closing Date
8 Apr 2026, 6:00 pmClosed
ASSISTANT ENGINEER
ASSISTANT ENGINEER,LID AND EW ,PALLIKARE GRAMA PANCHAYATH , P.O.BEKAL,PIN 671316
GENERAL-DEPARTMENT OF WOMEN AND CHILD DEVELOPMENT FUND-RENOVATION OF ANGANWADY AT CHETTUKUND IN PALLIKARA GP
2026_LSGD_847152_10
ETender/05/AE/LSGD/PK/2025-26
Open Tender
Civil Works - Buildings
Item Rate
180 days
PALLIKARE GP
Please refer Tender documents.
7 documents required · 7 mandatory
₹555
Yes
₹4,228
Yes
8 Jul 2026
1 Apr 2026
10 Apr 2026
1 Apr 2026
8 Apr 2026
1 Apr 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1ANGANVADI | |||||
| 1.001 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | - | cum | - | - |
| 1.002 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | - | cum | - | - |
| 1.003 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 0.2 | kg | - | - |
| 1.004 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | - | sqm | - | - |
| 1.005 | 15.13.1:Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50 metres lead:Of area 3 sq. metres and below | - | each | - | - |
| 1.006 | 50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood | 1 | cum | - | - |
| 1.007 | 50.9.2.1:Providing and fixing paneled and glazed shutters for doors, windows and clerestory windows, 35 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin - charge using Anjili/ Jack wood | - | sqm | - | - |
| 1.008 | 50.9.4.1:Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality Anjili/ Jack wood | 1 | sqm | - | - |
| 1.009 | 50.9.6.1:Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Using Anjili wood / jack wood 30 mm thick shutters | 1 | sqm | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1433545.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 1.93 MB
Tendernotice_2.pdf
PDF • 0.25 MB
Tendernotice_3.pdf
PDF • 0.25 MB
EXTENSION231-03-26.pdf
Tender Documents • 0.40 MB
PA.pdf
Tender Documents • 0.26 MB
viewsbd.pdf
Tender Documents • 1.64 MB
FOT.pdf
Tender Documents • 0.24 MB
AFFIDAVIT.pdf
Tender Documents • 0.24 MB
BOQ_1433545.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .