Loading
Loading…
Loading…
Tender Value
₹2.8 L
EMD Value
₹6,976
Closing Date
29 Sept 2026, 3:00 pm2d left
ASSISTANT EXECUTIVE ENGINEER
KWA WS SUB DIVISION PAYYANNUR
State Plan-2026-2027- INNOVATIVE TECHNOLOGIES AND MODERN MANAGEMENT PRACTICES--SUPPLYING AND PROVIDING 350MM MAGNETIC TYPE FLOW METER FOR GLSR CHANADUKKAM-Pipeline Work
2026_KWA_868665_1
06/2026-27/AEE/WSSDN/PNR
Open Tender
Civil Works - Water Works
Item Rate
30 days
Chanadukkam
Please refer Tender documents.
5 documents required · 5 mandatory
₹615
₹6,976
29 Sept 2026
9 Sept 2026
30 Sept 2026
9 Sept 2026
29 Sept 2026
9 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Working charges | |||||
| 1.001 | OD219357/2025-2026:Supply a 350mm mechanical flow meter Woltman type conforming to ISO 4064 Class B and the flow meter shall be tested and certified by FCRI- Palakkad | 1 | no | - | - |
| 1.002 | OD89581/2026-2027:Dismantling the existing 350mm faulty meter and conveying and fixing the new 350mm mechanical type flow meter | 1 | no | - | - |
| 1.003 | 18.68.1:Providing and laying D.I specials of class K - 12 suitable for push - on jointing as per IS : 9523 :Upt 600 mm dia | 0.97 | quintal | - | - |
| 1.004 | 18.69.1:Providing and laying D.I Specials of Class K - 12 suitable for mechanical jointing as per IS : 9523 :Upto 600 mm dia | 1.76 | quintal | - | - |
| 1.005 | 100.37.10.3:Cutting 350mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates. | 4 | no | - | - |
| 1.006 | 100.37.10.4:Welding 350mm (I.D.) M.S. pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates. | 4 | no | - | - |
| 1.007 | 100.37.10.5:Grinding cut and weld edges of 350mm (I.D.) M.S. pipes during fabrication work including all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates. | 8 | no | - | - |
| 1.008 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 6.46 | cum | - | - |
| 1.009 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.34 | cum | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
KWAGeneralConditionsforeTenderingV5.pdf
PDF • 0.69 MB
Tendernotice_1.pdf
PDF • 0.05 MB
viewsbd.pdf
Tender Documents • 1.64 MB
form83Flowmeter.pdf
Tender Documents • 0.45 MB
BOQ_1471271.xls
BOQ • 0.31 MB
flowmeter.pdf
PDF • 0.06 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .