CA NO GE(SOUTH) AMB 26 2024 2025 CERTAIN PLUMBING AND BUILDING REPAIRS FOR MARRIED AND OTM ACCN OF SARDAR PATEL ROAD IN B2 SECTOR, MAHESH NAGAR AND ADJOINING AREA OF AGE BR II (SOUTH) AMBALA UNDER GE (SOUTH) AMBALA CANTT

Amount

Demolition of lime concrete or cement conrete of any description in ground floor and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

Material and labour for rendering 10 mm thick in CM 1:3 admixed with an including integral waterproofing compound @ 3% by weight of cement complete all as specified and directed. NOTE : - WPC shall be paid seperataly

Supply only water proofing compound for external surfaces of plaster complete all as specified and directed.

Material and labour for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surface complete all as specified and directed.

Material and labour for cement concrete in foundations, filling and mass concrete Type E2 1:5:10 using 40 mm graded aggregate as in under sunken floor complete all as specified and directed.

Material and labour for cement concrete in foundations, filling and mass concrete Type C2 1:3:6 using 40 mm graded aggregate as in under sunken floor complete all as specified and directed.

Material and labour for premium quality, joint free, non skid coloured ceramic tiles, area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, 7 to 8 mm thick as in floor, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or layer in cement mortar (1:4) including dismantling of existing tiles etc including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Material and labour for premium quality coloured glazed ceramic tiles (350 x 250 mm / 450 x 350 x 7 to 8mm thick) as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the shade of tiles over and including rendering 10mm thick in cement plaster 1:3 finished rough surface to receive tiles including dismantling of existing wall tiling and cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Material and labour for 18 to 20mm thick Granite stone of black shade work (table rubbed, polished & moulding), as in floors, cooking platforms and like bedded with and including 15 mm thick screed bed in CM (1:4) and jointed with grey cement slurry @ 3 Kg/Sqm, and pointed with white admixture of pigment to match with shade of granite stone including grinding, polishing, rounding and moulding of stone slabs on edges, including dismantling of existing stone slabs and cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Material and labour for premium quality, light shade vitrified ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed as in neat, neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or layer in cement mortar (1:4) including dismantling of existing tiles etc and cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Material and labour for premium quality, light shade vitrified ceramic tiles 8to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in vertical surfaces such as dado, skirting, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including 10 mm thick rendering in cement mortar (1:3) including dismantling of existing tiles etc and cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Supply and fixing of PVC (SWR) 110 mm pipe single socket in any length with rubber ring joints fixed to wall or in floors including dismantling of pipes of any description any length including bends etc complete all as specified and as directed.

Supply and fixing of PVC (SWR) 75 mm pipe single socket in any length with rubber ring joints fixed to wall or in floors including dismantling of pipes of any description any length including bends etc complete all as specified and as directed.

Supply and fixing in repair of PVC (SWR) bends 75 mm bore complete all as specified and as directed.

Supply and fixing in repair of PVC(SWR) bends (any radius), for 75mm bore pipes, with access doors, complete all as specified and directed.

Supply and fixing in repair of PVC (SWR) bends 110 mm bore complete all as specified and as directed.

Supply and fixing in repair of PVC (SWR) junction single, (Single T 110mm), equal or unequal complete all as specified and directed.

Supply and fixing in repairs of 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed.

Supply and fixing in repair of vitreous china wash hand basin white flat back of size 550x440mm including CI brackets having PTMT nuts and 32 mm dia brass chromium plated waste coupling and making good to disturbed portion including 32 mm dia PVC waste pipe etc, complete all as specified and directed.

Supply and fixing in repair of for vitreous china squatting pan of Orrisa pattern size 580 x 440mm white (Ist quality) with ‘P’ or 'S’ trap, front or back inlet and foot rests of any pattern complete including provision of lime concrete bed and connection to flush pipe excluding flushing cistern, flush pipe and bracket and making good the disturbed area complete all as specified and directed

Supply and fixing in repair of vitreous china wash down water closet pedestal pattern (EWC) , White including connection to trap and to flushing pipe with ‘P’ or ‘S’ trap, making good to floor, plastic water closet seat cover with mild steel chromium plated hinges and chromium plated jet spray with 1.5 meter flexible LDPE pipe jointed with pipe complete all as specified and directed

Supply and fixing in repair of 10 litre capacity virgin polypropylene cistern, white at low level complete with 32 mm bore PVC flush pipe of suitable length, PVC connection 450 mm long having PTMT nuts including bracket and making all connections and making good the disturbed surfaces in cement mortar (1:3) to match with the existing surface, complete all as specified and directed.

Taking down chowkats or frames with shutter, area exceeding 1.50 Square metre but not exceeding 4 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed.

Supply and fixing factory made PVC hollow door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of extended 5 mm rigid PVC foam sheet cut at corner and jointed with 02 Nos., 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided through out the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical number & minimum 02 Nos. for horizontal member), complete all as specified and directed.

Supply and fixing Factory made solid PVC moulded door shutter, 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face complete all as sepcified in drawing complete and as directed by Engineer-in-Charge.

Supply and fixing in repair of PVC (SWR) floor trap 75mm dia plain with PVC grating including jointing with solvent cement complete all as specified and directed.

Supply and fixing in repair of PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement complete all as specified and directed.

Taking down Cement plaster on brick or stone walls including raking out joints hacking for key & scrubbing down with water etc compplete and rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair (without using extra cement) on walls in cement mortar (1:6), complete all as specified.all as specified and directed.

Taking down Cement plaster on brick or stone walls incl raking out joints hacking for key & scrubbing down with water etc compplete all as specified and rendering 5 mm thick cement plaster in CM 1:3 as in soffits of slabs/Chajja/ Sunshade finishing the plastered surface even & smooth without using extra cement etc complete all as specified and directed .

Taking down Cement plaster on brick or stone walls incl raking out joints hacking for key & scrubbing down with water etc compplete all as specified and rendering 5 mm thick cement plaster in CM 1:4 as in ceiling plastered surface finished even & smooth without using extra cement etc complete all as specified and directed.

Material and labour for brick work with sub class ‘B’ bricks, straight or curved on plain exceeding 6 metre mean radius in cement mortar (1:6) including demolition of brick work built in cement mortar including demolition of old brick/stone masonry built in cement mortar of any description including all quoins, archs, pillars etc complete all as specified and directed.

Material and labour for 15mm thick rendering in cement mortar (1:6) on surface of any description of brick or concrete and finished the surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of acraylic distemper with hand roller, over a coat of alkaline resistant primer complete all as specified and directed.

Material and labour for preparation of old treated surfaces (Plastered or un-plastered) of ceiling by brooming down or steel wire brushing, scrapping down smoke soot moulds, moss, efflorescence salts, treating oil and greasy spots etc. and applying two coats of white wash on ceiling, complete all as specified and directed.

Supply and fixing in repair of mixer for WHB (hot & cold), cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts, fancy type screwed for iron pipe and fixed bore of pipe 15 mm, complete all as specified and directed.

Supply and fixing in repair of 15mm chromium plated fancy type pillar taps, cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc complete all as specified and directed.

Supply and fixing in repair of CP bib tap screwed down high pressure, long body, cast copper alloy, chromium plated` with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union, complete all as specified and directed. (Note : Weight of bib tap shall not be less than 0.575 Kg).

Supply and fixing in repair of 15 mm dia bib taps, cast copper alloy with flange, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Supply and fixing in repair of brass spindle suitable for 15mm dia CP tap/CP stop cock (short body/ long body)/CP pillar cock/Brass bib tap as per approved sample to match the existing fitting complete all as specified and as directed.

Supply and fixing in repairs Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and as directed. (Minimum weight 15mm-90gms/20mm-125gms).

Supply and fixing in repair of stop cock, fancy type, chromium plated, long sank and cup (concealed type) screwed down high pressure with crutch or butterfly handle screwed both ends suitable for 15mm bore pipe, complete all as specified and directed. (NOTE: - Weight of stop cock shall not be less than 0.575 Kg)

Supply and fixing in repair of 15 mm dia angular stop valves of chromium plated screwed down high pressure with crutch or butterfly handle complete all as specified and directed.

Supply and fixing in repair of stop valve 15mm dia, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or unions, complete all as specified and as directed.

Supply and fixing in repair of 100 mm dia CP grating any type fixed in floor and jointed in CM 1:3 complete all as specified and as directed.

Supply and fixing in repair of PVC internal fitting of low level flushing cistern with syphon, handle lever etc complete kit complete all as specified and as directed.

Supply and fixing in repair of tanks cover with locking arrangement as per sample for 500/1000 litres capacity PVC water storage tank complete all as specified and as directed.

Supply and fixing in repair of Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

Supply and fixing in repair of sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12mm wide and chromium plated brakects guard and railing 60cm long etc complete as specified and directed.

Supply and fixing in repair of wall mixer (hot & cold), cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts, fancy type screwed for iron pipe and fixed bore of pipe 15 mm, complete all as specified and directed.

Supply and fixing in repair of chromium plated wall mixer telephonic with cruth with provision of hand shower screwed for iron pipe and fixed bore of pipe 15 mm, complete all as specified and directed.

Supply and fixing in repair of PVC connections 600mm long and 15mm dia PTMT with PVC washers on both ends, complete all as specified and directed.

Supply and fixing in repair of flush pipes to pedestal pan, including all joints complete all as specified and as directed.

Supply and fixing in repair of PVC seat cover (for EWC / Anglo Indian type WC complete all as specified and as directed.

Supply and fixing in repair of chromium plated (CP) waste coupling, 40mm dia bore suitable for steel sink. etc complete all as specified and as directed.

Supply and fixing in repair of chromium plated (CP) waste coupling, 32mm dia bore suitable for wash hand basin etc complete all as specified and as directed.

Supply and fixing in repair of PVC waste pipe 40mm dia flexible PVC hose pipe of standard length/size suibable for kitchen sink etc complete all as specified and as directed.

Supply and fixing in repair of PVC waste pipe 32mm dia flexible PVC hose pipe of standard length/size suibable for wash basin etc complete all as specified and as directed.

Supply and fixing in repair of CI brakets suitable for wash hand basin etc complete all as specified and as directed.

Supply and fixing in repair of CP Hand shower (Health faucet) including 1.50 meter long flexible tube and hook complete all as specified and as directed.

Supply and fixing in repair of PVC coloured bath cabinet overall size 400 mm x 500 mm decorative design with looking mirror, nepkin rail complete all as specified and as directed.

Supply and fixing in repair of chromium plated brass towel rail 20 mm dia & 600 mm long including a pair of CP brackets fixed with plastic rawl plugs & CP screws fixed in repair complete all as specified and directed.

Supply and fixing in repair of brass CP toilet paper holder, recessed type, fixed to wall with brass CP screws complete all as specified and as directed.

Supply and fixing in repair of soap dish brass CP superior quality, fancy type fixed with and including brass CP screws complete all as specified and as directed.

Supply and fixing in repair of Chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union with shower arm complete all as specified and as directed.

Supply and fixing in repair of peg set of 6 Nos, powder coated GI fixed with cadmium plated screws complete all as specified and as directed.

Supply and fixing in repair of stainless steel sink with drainage board 1.00 mm thick, ISI marked for kitchen with plug, washers and wastes, including bedding in cement mortar on to dwarf wall or fixing contilever brackets of suitable angle iron, CP brass waste coupling, superior quality PVC waste pipe and connecting union to pipe, over all size 915mm x460mm, bowl size 410mm x 330mm x160mm complete all as specified and directed.

Supply and fixing in repair of stainless steel sink with drainage board 1.00 mm thick for kitchen with plug, washers and wastes, including bedding in cement mortar on to dwarf wall or fixing contilever brackets of suitable angle iron, CP brass waste coupling, superior quality PVC waste pipe and connecting union to pipe, over all size 915mm x460mm, bowl size 410mm x 330mm x160mm complete all as specified and directed.

Supply and fixing in repair of stainless steel plate rack 1mm thick of size 600 x 900 x 250 mm weighing not less than 5.0 Kg each fix with stainless steel screw to wall, complete all as specified and directed

Supply and fixing Steel water tubing of 15 mm bore, medium grade galvanized with all fittings laids in floor with wall and on ceiling, as in repairs including taking down old ones complete all as specified and directed by Engr-in-charge.

Supply and fixing Steel water tubing of 20 mm bore, medium grade galvanized with all fittings laids in floor with wall and on ceiling, as in repairs including taking down old ones complete all as specified and directed.

Taking up or down steel tubing and connections for 15mm dia including cleaning for refixing old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.) complete all as specified and directed.

Taking up or down steel tubing and connections for 20mm dia including cleaning for refixing old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.) complete all as specified and directed.

Supply and fixing of water storage tank of 500 ltr capacity, HDPE triple layer, cylindrical, vertical with closed top and FDA approved, 100% UA stabilized, rust proof, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, screwed and suitable for iron pipe 20 mm bore complete including dismantling/ taking out of old water tank & removing from site complete all as specified and directed. NOTE:- Tank shall be white and make of tank shall be engraved on the tank.

Supply and fixing of water storage tank of 1000 ltr capacity, HDPE triple layer, cylindrical, vertical with closed top and FDA approved, 100% UA stabilized, rust proof, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, screwed and suitable for iron pipe 20 mm bore complete including dismantling/ taking out of old water tank & removing from site complete all as specified and directed. NOTE: - Tank shall be white and make of tank shall be engraved on the tank.

Supply and fixing in repair of ball brass valves,of 20mm bore high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

Cleaning and removing all scale and dirt, etc from existing water storage tanks of capacity exceeding 250 litres but not exceeding 500 litres by emptying, drying and cleaning the tank by scrubbing the dust with wire brush from tank including cleaning from mouths of circulating pipes, to entire satisfaction of Engr-in–charge complete all as specified and directed. (The rates includes for disconnecting of existing water tank, lowering if required and hoisting, reconnecting and refixing in same position after cleaning) NOTE : - (i) The whole process of disconnecting, reconnecting and refixing in same position after cleaning shall be done on the same day, if failing so, Rs. 100/- shall be deducted for each tank per day from the contractor due. (ii) A separate register to be maintained by contractor for cleaning and occupant signature with date to be obtain in it and also date of cleaning incorportated on tank

Cleaning and removing all scale and dirt, etc from existing water storage tanks of capacity exceeding 500 litres and but exceeding 1000 litres by emptying, drying and cleaning the tank by scrubbing the dust with wire brush from tank including cleaning from mouths of circulating pipes, to entire satisfaction of Engr-in–charge complete all as specified and directed. (The rates includes for disconnecting of existing water tank, lowering if required and hoisting, reconnecting and refixing in same position after cleaning ) NOTE : - (i) The whole process of disconnecting, reconnecting and refixing in same position after cleaning shall be done on the same day, if failing so, Rs. 100/- shall be deducted for each tank per day from the contractor due. (ii) A separate register to be maintained by contractor for cleaning and occupant signature with date to be obtain in it and also date of cleaning incorportated on tank.

NOTE:- Amount of credit of Rs. 1,24,780.00 for retrieved materials is mentioned in Schedule of Credit Page No 19 & 20 of tender documents in pdf form which will be deducted offline while acceptance of tender.

Parveen Kumar (BID ID -3102323)

Gupta Enterprises (BID ID -3103819)

A N BUILDERS (BID ID -3119446)

Ashwani Kumar (BID ID -3105734)