Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.5 LAccepted-AOC VILL PO PIRUMADARA TEH RAMNAGAR DISTT NAINITAL UK | RAMNAGAR | NAINITAL | UTTARAKHAND | L1 | Accepted-AOC Being 1st Lowest | |
| 2 | L2₹33.8 L+₹1.1 L (3.27%)Rejected-Finance HOUSE NO 04 NEW SARASWATI VIHAR NEAR PAWAN VIHAR PHASE 6 OVER HEAD TANK BAREILLY 243006 UP | BAREILLY | BAREILLY | UP | 243006 | L2 | Rejected-Finance BEING 2ND LOWEST |
Tender Value
₹38 L
EMD Value
₹76,000
Closing Date
5 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE EAST BAREILLY
Garrison Engineer East Military Engineer Services Shahjahanpur Road Bareilly Cantt
REPAIR MAINT OF B/R, E/M NATURE WORK IN MD / OTM ACCN (INCLUDING MES OFFICES, MES COLONY AND SUMMER APPLIANCE, REFRIGERATOR, AC AT RTS AND DEPOT UNDER GE (E) BAREILLY.
2022_MES_544318_1
8217/E8
Open Tender
Civil Works
Item Rate
BAREILLY
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE EAST BAREILLY
₹76,000
Yes
29 Sept 2022
9 Aug 2022
7 Sept 2022
9 Aug 2022
5 Sept 2022
22 Aug 2022
9 Aug 2022 - 15 Aug 2022
Amount
Taking down shutters only of any description area n exc 1.00 sqm complete all as specified and directed.
Taking down shutters only of any description, area exc. 1.00 sqm but n exc. 2.00 sqm, each complete all as specified and directed.
Refixing of shutters only of any description area n exc 1.00 sqm at same opening complete all as specified and directed.
Refixing of shutters only of any description area exc. 1.00 sqm but n exc. 2.00 sqm, each at same opening complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutter from the frame) area n exc 1.5 sqm complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutter from the frame) area exceeding 1.5 sqm but n.exc 4.00 sqm complete all as specified and directed.
Refixing of chowkhat frame area n exc 1.50 sqm at same opening complete all as specified and directed.
Refixing of chowkhat frame area exceeding 1.5 sqm but n.exc 4.00 sqm, each at same opening complete all as specified and directed.
S & F 35mm thick IInd class hard wood glazed or skeleton shutters, open rebated and prepared to receive glass, gauge etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered bead for securing glass etc,. Sizes of member of shutters as specified in SSR Part-I,1991, section 8, clause 8.20(a) complete all as specified and directed.
S & F 35mm thick 2nd class HW plain framed panelled shutter (any numbers of panel) with lock rail & panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneered on both faces.The size of rail as per IS: 1003 (part-I), kiln seasoned & chemically pressure treated complete all as specified and directed.
S & F 35mm IInd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc. (with sash bars), divided in to square, edges of framing plain, chamfered or rounded,fitted with cut and mitered bead for securing glasses etc, window ventilators etc are provided with styles and rails as specified in SSR Part-I, 1991, Section- 8, Clause 8.20(b), complete all as specified and directed.
S & F A solid PVC door frame size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tubes, suppling and fixing in opening as per specification and drawing complete all as specified and directed.
S & F of factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' chanel having PVC sheet strips of 20mm width stuck inside with solvent cement for style and plain colour PVC sheet for top rail,bottom, lock rails on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet, beading, and joined together with solvent cement, suppliing and fixing in the frame at site as per specification and drwing complete all as specified and directed.
S&F for steel windows, ventelators confirming to IS-1038 with side hung shutters including box type hinges with steel handle, 2 Nos 100mm MS tower bolt over MS flats iron on each openable leaf and Z section handle and steel peg stay complete without glazing bars, dovetailed or welded including a shop coat of red oxide zinc chrome primer complete all as specified and directed.
S&F for steel windows, ventelators confirming to IS-1038 with side hung shutters including box type hinges with steel handle, 2 Nos 100mm MS tower bolt over MS flats iron on each openable leaf and Z section handle and steel peg stay complete with glazing bars, dovetailed or welded including a shop coat of red oxide zinc chrome primer complete all as specified and directed.
S&F for steel ventilators fixed type, with glazing bars complete welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed. (Note :- Glass shall be measured and paid for separately).
S & F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc. 0.5 sqm in each pane complete all as specified and directed.
S & F 3mm thick figured glass pine head type and glazing with oil putty in square n' exc. 0.5 sqm in each pane complete all as specified and directed.
M&L sheet glass ordinary quality 3mm thick and glazing with oil putty in squares n.exc. 0.5 sqm each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden frames / steel frames, glazed with putty or fixed with beads complete all as specified.
M&L for Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar or for inserting holdfasts or man holes and making good dismantalled portion in CM (1:3) or cement concrete (1:2:4) type B1 as required complete all as specified and directed.
S&F Mild steel work in framed work such as grills, gratings, ladders etc., with ends of bars shouldered and / or riveted, or forged into spikes, and similar work conforming to Fe 410 -0 or Fe 310 -0 complete all as specified and directed.
S&F second class hard wood plain solid straight chowkhats and frames wrought frammed ribated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.
S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned taks or galvanised wire staples complete all as specified and directed.
All as per Srl item No. 23 here in before but fix in repair
M & L for 2nd class hard wood fillets square, rectangular or triangular insection, chamfered on edges & face and bullnosed for sectional area n' exc 3 Sqcm complete all as specified and directed.
S & F Mild steel work as in holdfast conforming to Fe 410 -0 or Fe 310 -0 complete all as specified and directed.
S & F 200mm long mild steel barrel tower bolts stove enamelled black with bright bolt all as specified and directed.
All as per above Item no 27 but 100mm long
Supply and fix only 100mm long butt hinges medium weight cold rolled mild steel all as specified and directed.
All as per Srl item No. 29 here in before but 75 mm long
S & F 150mm long mild steel pressed handle oval type stove enamelled black complete all as specified and directed.
All as per Srl item No. 31 here in before butt 100mm long
S & F for 200mm long berrel tower bolt aluminium anodised with staples and bolt of extruded section complete all as spd. & directed.
S & F for 100mm long butt hinges extruded aluminium anodised complete all as spd. & directed.
S & F 150mm long extruded aluminium anodised handle all as specified
S & F 300mm mild steel ordinary rat rail , rod pattern springs including roller and roller plate( Helical door spring), complete all as specified and directed.
M & L 300mm long mild steel sliding door bolt, plate type stove enamelled black with bright bolt not less than 12mm dia and including minimum 6 bolts and nuts etc all as specified and directed.
Preparation newly wooden surfaces exc. 10 cm width or girth and applying two coat of synthetic enemelled paint over a coat of pink primer complete all as specified and directed.
Preparation newly steel surfaces exc. 10 cm width or girth and applying two coat of synthetic enemelled paint over a coat of red oxide including all preparation complete all as specified and directed.
Demolition of brick / stone work built in cement mortar including all quians, pillars etc. complete all as specified and directed.
M & L for brick work with sub class 'B' bricks in cement mortar 1:6 straight or curved on plan exc. 6.00m mean radius with old size bricks complete all as specified and directed.
All as per Srl item No. 41 here in before but half brick in CM (1:4)
Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises all as directed and specified
M & L 9 to 10 mm thick glazed coloured ceramic tiles ( square/ rectangular) with border , area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed.
M & L Non skid ceremic colour tile 9.00 to 10.00 mm thick (square/rectungular) area exc. 0.11 Sqm and n'exc 0.18 Sqm in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M & L Non skid ceremic colour tile 7.00 to 8.00 mm thick (square/rectungular) area exc. 0.11 Sqm and n'exc 0.18 Sqm in vertical surface as skirting/dedo set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L for vitrified glazed ceramic dark shade/ double charged / ultra charged tiles 10 mm thick square/ rectangular) polished area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L for vitrified glazed ceramic dark shade/ double charged / ultra charged tiles 10 mm thick square/ rectangular) polished area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm as in vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed.
M&L Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.
M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, for laying floor finishes / tiles complete all as specified and directed.
M&L 15mm thick rendering in cement mortar 1:4 to brick masonry wall surfaces or on other than fair faces of brick wall surfaces finished fair & even without using extra cement for fixing tiles etc complete all as specified and directed
M & L 25 mm thick PCC 1:2:4 type B0, using 12.5mm graded aggregate as in floors to receive surface of tile complete all as specified and directed.
Taking up or down steel tubing and connections including cleaning for refixing or removal from site of 15mm bore of pipe complete all as specified and as directed.
Taking up or down steel tubing and connections, including cleaning for refixing or removal from site, size of pipe 20mm bore complete all as specified and directed.
S & F steel water tubing of 15mm bore of tube medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.
S&F GI tubing 'medium grade' galvanized with and including all GI fittings and fixed complete to walls and ceiling or laid in floors 20mm dia complete all as specified and directed.
Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.
Refixing old retrieved steel water tubing and connections in new or old position (Walls, ceiling, floors, etc.) 15mm bore complete all as specified and directed.
Refixing old retrieved steel water tubing and connections in new or old position (Walls, ceiling, floors, etc.) 20mm bore complete all as specified and directed.
S & F and repair 15mm bore bib tap standard of PTMT any colour screwed down high pressure with crutch or capastan head screwed both ends for iron 15 mm bore pipe or for unions ( Minimum weight 120 Gms) all as specified.
S & F in repair 15mm bore stop valves of PTMT screwed down high pressure, with crutch or capastan head screwed both ends (minimum weight 110 Gms) all as specified.
S & F in repair 15mm bore concealed stop valves long shank cost copper allow chromium plated fency type screwed down high pressure, with capstan handle long shank screwed both ends all as specified.
S & F of sink with drainage board made of stainlen steel 1 mm thick kitchen or lab with plugs washers and water incl bedding in cement work to drawt wall or incl fixing contilever bracket and connecting union to pipe over all size 915x460 mm bolw size 410 mmx 330mm x160mm complete all as specified and directed.
S & F and repair 15 mm bore fency type bib tap chromium plated screwed down high pressure with crutch or capastan handle screwed both ends for iron 15 mm bore pipe or for unions complete all as specified and directed.
S & F in repair 15mmbore stop valves cost copper allow chromium plated fency type screwed down high pressure, with crutch or capastan handle screwed both ends complete all as specified and directed.
S & F and repair 15mm bore pillar cock fency type cast copper alloy with capastan head,chromium plated, screw down, high pressure, screwed for iron pipe of 15 mm bore with all complete all as specified.
S & F and repairs fo brass Chromium plated shower rose 125mm size with or witout swivel joints including fixing to GI pipe all as specified and directed.
S & F for 20 mm dia Harrision curtain rails mild steel chromium plated including with fixing brackets stop rollers etc. complete all as specified and directed.
S&F PVC 10 ltr capacity symphonic action type, low level, flushing cistern, white, with inlet, ball valve, float and handle including MS suitable size bracket complete all as specified and directed.
S&F in repairs vitreous China water closet Orissa pattern of size 580x440mm, white, with 'P' ro 'S' trap and integral foot rest, front or back inlet and flush pipe of polytheylene 32mm dia for low level cistern including provision of cement concrete bedding complete all as specified and directed.
S & F vitreous China wash hand basin, of size 550 x 400mm including brackets, flat back with waste pipe and CI grating including all connections, fixed in repair, complete all as specified and directed.
S&F PVC connection 15mm size with PTMT nut of length 450mm complete all as specified and as directed.
M&L for 32/50mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed
S & F PVC waste pipe of 32 mm dia PVC socket for WHB / Kitchen sink complete including sink cuppling complete all as specified by and directed.
S & F for 100 mm dia of grating doom of PTMT (minimum weight 25 gms) complete all as specified and directed.
Dismantling PVC/RCC water storage tanks and removing from site exc 250 ltr but n.exc 500 Ltrs capacity and including S&F rotational moulded polytheylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position with polythene float and fly nut screwed for iron pipe of 20mm dia or for union complete all as specified and directed.
S&F in repairs Plain Aluminium sheet 0.56mm thick fixed with nails at bottom, back and front side of wooden doors etc all as directed and specified
S&F 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe complete all as specified and directed.
S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe complete all as specified and directed.
S&F as in repair float valves PVC high pressure with polythene float and fly nut complete, screwed for iron pipe 20mm bore complete all as specified and directed.
S&F as in repair float valves PVC high pressure with polythene float and fly nut complete, screwed for iron pipe 15mm bore complete all as specified and directed.
Taking down cement plaster on brick/stone wall etc including raking out joints/hacking for key scrubbing down with water etc including removal of rubbish to a distance upto 100 mtr complete all as specified and as directed.
M&L 15mm thick rendering in CM 1:4 in two coats (10mm+5mm), second coat mixed with water proofing compound on brick work or concrete surface finished fair and even up to second floor approx 9mtr height complete all as specified and as directed. (Note :WPC will be measured & paid separately)
M&L for 15mm thick rendering in cement mortar 1:6 to on brick masonary wall surfaces or on other than fair faces of brick masonary finished even and fair without using extra cement complete all as specified and directed.
M&L 5mm thick rendering in CM 1:3 as on ceiling finished even and smooth without using extra cement complete all as specified and as directed.
M&L for two coat of distemper oil emulsion white or tinted on newely plastered surface of wall after necessary preparation of surface complete all as specified and directed.
M&L three coat of white wash as on new plaster surface/concrete surface as on ceiling after necessary preparation of surface complete all as specified and as directed.
M&L two coats of cement base paint on new plastered surface after necessry preparation of surface complete all as specified & as directed.
Supply only integral water proofing compound.
Dismantling of PVC pipes or reinforced concrete drain pipe, jointed in cement mortar and taking out of trenches if required upto 100mm bore including fitting complete all as specified and directed.
S & F 75mm dia spun type, cast iron, soil waste and vent pipe in any length, with or without ears, with cement joints, laid in trenches or under floors, in shaft portion up to 12 m height complete all as specified and directed. (ISI marked and conforming to relavent IS)
All as per Srl item No. 93 here in before but except Pipe
S & F 100mm dia spun type, cast iron, soil waste and vent pipe in any length, with or without ears, with cement joints, laid in trenches or under floors, in shaft portion up to 12 m height complete all as specified and directed. ( ISI marked and conforming to relavent IS)
All as per Srl item No. 95 here in before but Except Pipe
S & F in repairs CI bend 75 mm (any radius) or diminishing pieces (Tee, Elbow, Double Tee & socket) complete all as specified and directed.
S&F CI bends (any radius) 100mm bore (Tee, Double Tee,Elbow, Socket) complete all as specified and directed.
S & F 110mm dia PVC (SWR) pipes sigle socketed in any length with rubber ring joints fixed to wall/floor complete all as specified and directed.
S & F in repairs PVC (SWR) bend 110 mm any radius (Tee, Double Tee,Elbow, Socket) complete all as specified and directed.
S & F 75mm dia PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to wall with neceesary FI Clamp of size 40X6 mm complete all as specified and directed.
S & F in repairs PVC (SWR) bend 75 mm any radius (Tee,Elbow & Bend as required as per site) complete all as specified and directed.
Taking out unserviceable Nahani trap / floor trap and M&L for 75 mm dia Nahani trap / floor trap with CI grating with lead joints, complete all as specified and directed. ( ISI marked and conforming to relavent IS)
Dismantling of plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern as in roof covering etc. complete all as specified and directed.
Dismantling of asbestos cement (corrugated, semicorrugated etc) sheet in roof covering complete all as specified and directed.
S & F 0.63 mm galvanised corrugated mild steel sheeting with two corrugation side lap fixed with L & J type hook bolts and washers in roof, waals etc with grade of zinc coating 275 complete all as specified and directed.
M & L for 6mm thick AC sheet corrugated or semi corrugated sheet in roof covering fixed with J and L hook complete all as specified and directed.
M & L for 6mm thick AC two pieces adjustable plain wing ridge fixed with coach screw complete all as specified and directed.
Demolition of cement concrete in ground floor paving n. exc. 15 cm thick below or above GL complete all as specified and directed.
M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 20 mm graded crushed stone aggregate) as in plinth protection/path laid to slope of 1 in 12 and finishing cement concrete surface even and smooth without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering of exposed edges complete all as specified and directed.
M&L for 40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in floors laid in panels and finishing top surfaces of cement concrete even and smooth without using extra cement including fixing only glass dividing strips to divide the area in panels and inserted in position to conform to design complete all as specified and directed.
Supply only glass dividing strips 3 mm thick and 38 mm wide complete all as specified and directed.
Demolition of cement concrete reinforced in any position including cut of bars as required, complete all as specified and directed.
M & L for RCC in 1:2:4 type B-1 using 20mm graded stone aggregate as in slab suported on walls and column in floor, roof landing, balconies,canopies deck slab and in shelves and man hole covers and the like including all necessary form work complete all as specified and directed.
M & L for RCC in 1:2:4 type B-1 using 20mm graded stone aggregate as in Fins, Fecias, louvers, parapet, railings and artificiar work exc 60 cm in height, newels, balustrade and the like complete all as specified and directed.
M & L formwork to soffits of suspanded slab such as roof slab, floor slab landing and similar work n' exc. 200 mm thick including fair finished complete all as spd and directed
M & L mild steel TMT bars,10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Grade-I IS-432 (Part -I) complete all as specified and directed.
All as per Srl item No. 117 here in before but 5 mm dia and over upto and including 10 mm dia in striupps
M&L 20-22 mm thick Granite of any colour (tablee rubbed and polished) as in windows cill, in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including form work, pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
S& F in repair door closer hydraulically regulated Aluminium (extruded section body), designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.
M&L for repairing to existing aluminium doors of any size by straightening of frame / shutter, replacing the detoriated member with new, replacing the broken / non funcional hinges with new, replacing decayed rubber gasket with new, replacing the broken glass pane of any size with new 5.00mm thick tinted glass, replacing unserviceable handle, tower bolt, lock, floor spring, foundation box with governing pivot, top pivot, peg stay etc with new and including taking down and at same place after making the door / window smooth functional complete all as specified and directed.
S&F in Vitreous China counter top oval type coloured wash basin suitable size including pillar taps with bottle trap, including waste pipe fixing on counter with stainless steel brackets complete all as specified. Make Jaguar or equivalent
S&F in repair for GI steel sheet cover / lid 0.45m dia and 0.20m ht of 0.8mm thick of semi sphere shape hollow fixed to over head service tank of size 500 ltrs to 1000 Ltrs capacity with proper fixing arrangement of hasp and staple and butt hinges fixed with small nuts and bolts complete all as specified and directed
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position for capacity of water tank exc 250 and not exc 500Ltr. (Cleaning repairing, etc. measured separately)
Demolition of cement concrete(unreinforced) of any description and in any position not otherwise specifically provided for.
M& L for cement concrete 1:2:4, Type B-1, using 20 mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered edges all as directed.
M& L for 50mm thick cement concrete type B2 1:2:4,(using 20 mm graded stone aggregate) with water proofing compound as in roof padding, complete all as specified and directed
M&L for Polythene film, black, 50micron laid in floors and roof complete all as specified and as directed.
M & L for applying cement slurry over existing roof surface @ 3 Kg/Sqm incl mix with water proofing liquid @ 0.15 ltr per 50 kg cement bags as per manufactures instructions complete all as specified and directed.
S&F 32mm dia GI pipe, medium grade as in spout pipe in sunken floor complete all as specified and directed.
M & L for cutting out cracks to V-section in existing roofs or terracing cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand in 1:1 cm (by weight) complete all as specified and directed.
M&L for screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:4, over RCC roof slabs for laying water proofing treatment mixed with using water proofing liquid @ 150 ml per bag of cement complete all as specified and directed. Note:- Water proofing liquid shall be measured and paid separately.
M & L PCC (1:5:10) type E-2 (using 40 mm graded stone aggrigate) as in foundation and mass concrete complete all as specified and directed.
S&F in repair vitreous china wash down water closet pan (pedestal pattern) with 'P' or 'S' trap white, including connection to drain or out going pipe and flush pipe anti symphonize pipes etc complete all as specified and directed. Model :- CNS-WHT-WH-10(seat), CNS-WHT-WCN1 (seat cover) Jaquar , Parryware Model C 0297(seat) & E-8071 (seat cover), Cera Model NO S1050101(seat) & B-1510119( seat cover)
Taking down copper/aluminum point wiring complete including fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets, light fittings, holders etc and removing the items from site to store for taking credit (credit for above items should be made as per conditions separately ) and making good disturbed surfaces to match with the existing surfaces of walls, floors etc complete all as specified and directed.
Taking down ceiling/exhaust fan and disconnecting, removing to store for keeping in safe custody for re-use after making minor repairs complete all as specified and directed.
Taking down electric meter and disconnecting, removing to store for keeping in safe custody in store for re-use etc. and making good disturbed surfaces to match with the existing surfaces of wall, floors etc complete all as specified and directed.
Taking down electric storage type water Heater (Geyser) and disconnecting, removing to store for keeping in safe custody in store for re installing after making minor repair and making good disturbed surfaces to match with the existing surfaces of wall, floors etc complete all as specified and directed.
Taking down main switch / MCB DBS including MCBS etc of any size and removing the items from site to store for taking credit (credit for above items should be made as per conditions separately) or re-use and making good disturbed surfaces to match with the existing surfaces of wall, floors etc complete all as specified and directed.
Taking dowm submainwiring/service cable including earth wire and removing from site to store for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces to match with the existing surfaces of walls, floors complete all as specified and directed.
M & L for point wiring with 1.5 sqmm cable PVC unsheathed and insulated copper multistranded conductor FRLS 1100 Volts grade cable (red colour cable to be used for live connection and black colour cable to be used for neutral connection) controlled by one way switch drown through and including PVC concealed conduit with all accessories including 1.5 sqmm copper multistrand conductor FRLS 1100 Volts grade unsheathed PVC insulated (green colour) continuity earth wire connected to common earth dolly and sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switch, socket and fan regulator with 3 mm thick hylum laminated sheet cover incl cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and as directed following for one light point/fan/Exh fan/bell point controlled by one way switch.
All as per item No-143 herein before but One 3 pin socket oultel 5 Amp on the same board with other switch
All as per Srl item No. 143 here in before but One 3 pin socket oultel 5 Amp independent
All as per Srl item No. 143 here in before but 2.5 Sqmm PVC insulated sheathed cable and 2.5 Sqmm cable for earth wire for one 5 pin socket outlet 15 Amps
S&F switch piano flush type single pole one way 5 Amps complete all as specified and directed.
S&F Switch Piano flush type single pole one way 15 Amps complete all as specified and directed.
S&F Socket outlet 2 in 1, 3 pin 5 Amp flush type complete all as specified and directed.
S&F socket outlet 2 in 1, 3 pin 5Amp and 15 Amp complete all as specified and directed.
M&L for point wiring for modular fittings using 1.50 sqmm size, PVC insulated, unsheathed 1100 volts grade single core multi-stranded (FRLS) copper conductor cable in proper colour coding drawn into and including non metallic rigid PVC conduit medium grade (not less than 20 mm dia) with metal flush box for mounting of modular fitting and cover plate (metal box, inner and outer plates with cover etc shall be measured and paid seperately under respective items) including one continuous run of PVC insulated (green colour) 1.50 sqmm size stranded FRLS copper conductor cable as in earth wire and connecting all metal parts to common earth dolly incl cutting and chases pinning in for concealed conduit wiring and making good of disturbed surface complete all as specified and directed for One light point / fan point / bell push point controlled by one modular switch 6 Amp.
All as per Srl item No. 151 here in before but One 3 pin 6 amp modular socket out let point controlled by one switch on the same board.
All as per Srl item No. 151 here in before but One 3 pin 6 amps modular socket out let point on independent board
M & L power point wiring for modular fittings of copper cable FRLS grade,multi stranded 2.5 Sqmm size for one 5 pin modular socket outlet 15 Amps on independent board with 2.5 Sqmm size of copper cable FRLS grade,multi stranded earth conductor cable in proper colour coding drawn into and including non metallic rigid PVC conduit medium grade (not less than 20 mm dia) with metal flush box for mounting of modular fitting and cover plate ( metal box, inner and outer plates with cover etc shall be measured and paid seperately under respective items) including one continuous run of PVC insulated (green colour) 2.50 sqmm size stranded FRLS copper conductor cable as in earth wire and connecting all metal parts to common earth dolly incl cutting and chases pinning in for concealed conduit wiring and making good of disturbed surface complete all as specified and directed.
S&F modular switch, one way 6 Amps, one module of suitable colour complete all as specified and directed.
S&F modular switch, one way 16 Amps, one module of suitable colour complete all as specified and directed.
S&F modular socket, 6 Amps, 2/3 pin combined, 2 module complete all as specified and directed.
S & F modular socket, 6 Amps/ 16 Amps, 2/3 pin combined, 2 module of suitable colour complete all as specified and directed.
S&F ceiling rose, 3 terminals, PVC polycarbonate isolated body.
S&F Lamp Holder, PVC/Polycarbonate type with back plate for batten fitting including Lamp LED,aluminium heat sink powder coated white with PC diffuser & B22 base cap 9watt 240 Volt.
Fixing only old serviceable light fittings any type received from item here in above including electric connection & cleaning above complete all as specified and directed.
Fixing only old serviceable LED Tube light fittings 18/20 Watt, 4' complete received from item here in above including cleaning & connecting up with 3 core flexible copper conductor cable of suitable size complete all as specified and directed.
S&F in repairs switch piano flush type single pole one way 5 Amps complete all as specified and directed.
S&F in repairs Modular switch piano flush type single pole one way 6 Amps complete all as specified and directed.
S&F in repairs Switch Piano flush type single pole one way 15 Amps complete all as specified and directed.
S&F in repairs Modular Switch Piano flush type single pole one way 16 Amps complete all as specified and directed.
S&F in repairs Bell push flush type 5 Amp complete all as specified and directed.
S&F in repairs Modular Bell push flush type 6 Amp complete all as specified and directed.
S&F in repairs Socket outlet 2 in 1, 3 pin 5 Amp flush type complete all as specified and directed.
S&F in repairs Modular Socket outlet 2 in 1, 3 pin 6 Amp flush type complete all as specified and directed.
S&F in repairs socket outlet 2 in 1, 3 pin 5Amp and 15 Amp complete all as specified and directed.
S&F in repairs Modular socket outlet 2 in 1, 3 pin 5Amp and 16 Amp complete all as specified and directed.
S&F in repair Bell AC 230 Volt single pole Ding Dong complete all as specified and directed.
S&F in repairs Lamp holder (batten/angle) PVC/Polycarbonate type with back plate for batten/angle fittings complete all as specified and directed.
S&F in repairs stepped, (socket/switch type) electronic fan regulator flush type, 180 Watt, 240 Volts.
S&F in repair modular fan Step regulator 120 watt, 230 Volts, 2 module of suitable colour complete all as specified and directed.
S & F in repairs normal/worm white LED Tube light fittings 18/20 Watt, 4', T-8 complete with retrofit tube including connecting up with 3 core flexible copper conductor cable of suitable size. Make- Havells/ C &S /Crompton
S & F in repairs Normal/worm white LED Tube light fittings 9/10 Watt, 2', T-8 complete with retrofit tube including connecting up with 3 core flexible copper conductor cable of suitable size complete all as specified and directed.
S&F in repairs LED bulk head luminaire 12 watt with Engineering plastic housing and oval shaped clear prismatic diffuser, heat sink integrated including one no. 12Watt LED lamp complete all as specified and directed.
S & F in repairs normal/worm white LED Ceiling light 18Watt surface mounted, 1'x1' die cast aluminium housing with frosted diffuser including LED lamp 18 Watt complete all as specified and directed.
S & F in repairs LED Ceiling light 24 Watt 2'x2' recesses mounted die cast aluminium housing with frosted diffuser including worm white LED lamp 24 Watt complete all as specified and directed.
S & F in repairs LED Wall bracket type CITY-2 fitting 9 Watt complete all as specified and directed.
S & F in repairs normal/worm white LED Wall bracket type fitting 9 Watt complete all as specified and directed.
S & F in repairs normal/worm white LED light fitting round shape( down lighter ) 3 to 6 Watt 220 Volts recesses type complete all as specified and directed.
S & F in repairs normal/worm white Bed side lamp rotate at 0-360 angle complete all as specified and directed.
M & L in repairs on surface for non metallic rigid PVC conduit ISI marked, medium grade 25mm dia size including all fittings such as tees, bends, junction boxes, elbows, saddles, lock nuts etc and making good disturbed surfaces complete all as specified and directed. Make- AKG/Presto Plast/ RKG Plastic/Austro , ISI Marked
M & L in repairs Junction boxes cover PVC with suitable screws of size 25mm dia complete all as specified and directed. Make-RKG Plastic/Presto Plast/ AKG
S & F in repairs of PVC rectangular block for mounting switches, sockets, fan regulator etc. with 3mm thick plastic laminated sheet cover of size 350 X 300 X 50 mm deep complete. ISI marked, complete all as specified and directed. Make- Presto Plast/RKG Plastic
S&F in repairs of 2.8mm thick rectangular plastic laminated sheet of size 300mm x 200 mm including cutting holes for mounting switches, sockets, fan regulators etc as pre requirement including fixing with sufficient no. of machine screws & washers complete all as specified.
Dismantiling the ceiling fan received from item here in above and E/M stores, examine complete part thoroughly, oiling, greasing all parts and complete overhauling of fan including replacement of spares & accessories, rewinding, reassembling, making fully functional and also depositing to E/M stores & Hanging the ceiling fans after cleaning, painting and writing MES No with existing colour synthetic enamel paint, 2.0 cm high letters including electric connection with suitable electric cable complete all as specified. [Note:- Spares & accessories shall be measured and paid separetely.]
M&L for taking out the burnt copper wire, cleaning the Stator & Rotor with CTC, rewinding the fan with existing gauge and same nos of turns with super enameled copper including varnishing, baking, replacement of sleeves etc and reassembling the fan & testing , complete all as specified and directed.
Supply only ball bearings suitable for ceiling fan of any sweep.
Supply only capacitor 2.5 Mfd, 415 , 50Hz. Make- Universal/Tibcon
Supply only fan hook clamps steel suitable for ceiling fan hanging.
Supply only rubber reel for ceiling fan hanging .
Supply only fan down rod made of 15 mm bore GI pipe, 45 cm long complete all as specified & directed.
Supply only Canopy PVC suitable for fixing on fan down rod with screws etc.
Supply only Fan blades complete with nuts & washers and complete all as specified & directed. Make- Bajaj/Orient/ Havells/Crompton
Supply only nut, bolt,washer and split pins suitable for fixing of fan clamps with down rod& hanging of ceiling fan.
Supply only copper winded rotor assembly complete for 1200mm sweep ceiling fan all as specified and directed. Make- Bajaj/Orient/ Havells/Crompton
Supply only copper winded stator assembly complete for 1200mm sweep ceiling fan all as specified and directed.Bajaj/Orient/ Havells/Crompton
Dismantiling the Exhaust fan received from taking down from here in before and E/M stores, examine complete part thoroughly, oiling, greasing all parts and complete overhauling of Exhaust Fan including replacement of spares & accessories, rewinding and reassembling making fully functional and also depositing to E/M stores & Fixing the exhaust fans after cleaning, painting and writing MES No with existing colour synthetic enamel paint, 2.0 cm high letters including electric connection with three core 1.0 sqmm PVC electric cable with stranded copper conductor complete all as specified. [Note:- Spares & accessories in Item Srl No-204 to 210 shall be measured and paid separetely].
M&L for taking out the burnt copper wire, cleaning the Stator & Rotor with CTC, rewinding the Exhaust fan with existing gauge and same nos of turns with super enameled copper including varnishing, baking, replacement of sleeves etc and reassembling the fan & testing, complete all as specified and directed.
Supply only ball bearings suitable for Exhaust fan of 300 sweep.
Supply only capacitor 4.0 Mfd, 415, 50Hz. Make- Universal/Tibcon/Bajaj/ Usha
Supply only metalic Exhaust fan blade with MS frame for 300mm sweep Exhaust fan complete all as specified and directed. Make- Bajaj/ Crompton/ Havells, ISI Marked
Supply only rubber Pad for Exhaust fan fixing .
Supply only nut, bolt,washer and suitable for fixing of Exhaust fan clamps/arms.
Supply only motor kit copper winded for Metallic Exhaust fan 300mm sweep complete all as specified. Make-Bajaj/Orient/ Havells/Crompton
Supply only motor kit copper winded for PVC Exhaust fan 200mm sweep complete all as specified. Make-Bajaj/Orient/ Havells/Crompton
Disconnecting / taking down from position existing defective storage type water heater (Geyser) 25 Ltrs capacity from Item here in above & E/M stores, carefully, Opening for repairing/replacement of deffective spares including replacement of spares & accessories and reassembling making fully functional with accessories & packing new glass wool etc and also depositing to E/M stores & Re-install of geyser after cleaning painting and writing MES No with existing colour synthetic enamel paint, 2.0 cm high letters and fixing of suitable nuts bolts with washers on wall including all necessary electrical connection with three core 1.5 sqmm PVC insulated sheathed of stranded copper conductor electric cable and also water connection with suitable heavy duty PVC connections complete all as specified. [Note:- Spares & accessories in Item Srl No-212 to 219 shall be measured and paid separetely].
Supply only Geyser assembly made out of copper for 25 Ltr capacity Geyser as per sample complete all as specified and directed. ISI Marked, Make- Bajaj/Havells.
Supply only Geyser element upto 2.0KW as per existing such as push type/thread type/dual clip type etc with rubber gasket suitable for Geyser of complete all as specified. Make:- Bajaj/ Recold/ Havells.
Supply only thermostate switch (ISI Marked) suitable for Geyser 25 Ltr capacity, adjustable 0 degree to 80 degree centigrade and acting at 70 degree centigrade. ISI Marked, Make- Thetta/Bajaj
Supply only indicator lamp square type/round type, red/green colour for Geyser of any capacity complete all as specified and directed.ISI Marked
Repairs on existing inner copper tank by using brazing to make leak proof not exceeding 15 cm in length complete all as specified and directed.
Repairs on existing copper Geyser assembly by using brazing to make leak proof not exceeding 12 cm in length complete all as specified and directed.
Supply only pressure release valve with bent to Geyser as per ISI specification and directed.
Supply only safety valve for Geyser as per ISI specification and directed.
Fixing and connecting electric meter upto 25 Amp (Received under taking down here in before) complete all as specified and directed.
S&F in replacement of copper flexible cable 1.0 sqmm, 3 core complete all as specified and directed
S&F in replacement of copper flexible wire three core of size 1.5 sqmm, 3 core complete all as specified and directed
M & L in repairs for sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor in & including PVC Casing & Caping complete all as directed.
M & L in repairs sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor in & including PVC Casing & caping all as directed.
M & L in repairs sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn in existing conduit all as directed.
M & L in repairs sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn in existing conduit all as directed.
Supply only 3 pin 16 A plug top 230 Volts complete all as specified and directed. ISI Marked , Make-Bajaj/Anchor/ Havells
S&F in repairs single pole and neutral enclouser having IP -67 protection with a three pin & earth plug with socket complete and one SPN, 20 A , 240 V MCB complete all as specified and directed.
S&F in repairs sheet metal enclousers (DBS) when MCBs to be used 4 way, 415 Volts double door Three Phase & neutral with 200 Amps rated bus bar complete all as specified and directed.
S&F in repairs sheet metal enclousers (DBS) when MCBs to be used 4 way, 240 Volts double door single pole & neutral with 200 Amps rated bus bar complete all as specified and directed.
S&F in repairs sheet metal enclousers (DBS) when MCBs to be used 8 way, 240 Volt, double door single pole & neutral with 200 Amps rated bus bar complete all as specified and directed.
S&F Isolator three phase and neutral, four pole 32A-100A, 415Volt complete all as specified and directed.
S&F in repairs MCB single phase and neutral 16A - 32A, 230V 10KA. B' curve type complete all as specified and directed.
S&F in repairs MCB SP 6A-32A, 230V. 10KA. B' curve type complete all as specified and directed.
Fixing only MCB SP 6A-32A, 230V. 10KA (Received from Item here in above) complete all as specified and directed.
M & L in repairs for fixing of GI pipe 40mm dia in suitable length on ceiling /walls including 01 No. 25x4 mm MS Hook ,nuts, bolts washers, Rubber reel for making arrangement of ceiling fan hanging & including painting etc complete. Note :- GI pipe for this item will be paid separetly.
Supply only GI tube light grade of 40mm bore.
M & L for general maintenance of Refrigerator of any capacity upto 310 Ltrs installed in various buildgs of RTS & Depot including rectification of leak testing & making smooth functional by replacing of worn-out spares, charging of refrigerant gas etc including necessary T &P and consumables required for welding/brazing works etc complete all as specified and directed. Note - Spares/items, gas etc required shall be measured and paid separately for respective items). The following items shall be catered for replacement under item No. 238 above (Note : rates of fixing, testing, commissioning of following items (from item 239 to 264 ) below) deemed to be catered under as inclusive under item No-238 above.)
M & L for Hermatically sealed compressor unit upto 300/ 310 Ltrs cap refrigerator including Gas chrging complete all as specified and directed. Make Kirloskar/ LG or equivalent make
M & L for Relay assembly complete for any capacity refrigerator complete all as specified and directed. Make : Indfoss, Renutrol Sriram, Scimen BCH
M & L for over load protector (OLP) upto 300/310 Ltrs capacity refrigerator complete all as specified and directed.
M & L for charging of R-134a refrigerant Freaon gas in refrigerator of capacity 165 / 200 / 280 / 300 / 310 Ltrs Ltrs to its saturation level complete all as specified and directed.
M & L for Thermostat switch with knob Make : Indfoss/ Danfoss for 165/200 Ltrs capacity refrigerator complete all as specified and directed.
All as per Srl item No. 243 here in before but 300/310 Ltrs.
M & L for freeze door complete for 165/200 Ltrs capacity refrigerator complete all as specified and directed.
All as per Srl item No. 245 here in before but 300/310 Ltrs.
M & L for Freezer assembly complete with freezer door 165/200 Ltrs refrigerator complete all as specified and directed. Make : Kelvinator, Voltas, Blue star, Alwyn, Usha Sriram
All as per Srl item No. 247 here in before but 300/310 Ltrs.
M & L for Megnatic door gasket for 165/200 Ltrs capacity refrigerator complete all as specified and directed.
All as per Srl item No. 249 here in before but 300/310 Ltrs.
M & L for Defrost Switch as per sample for any Capacity complete all as specified and directed.
M & L for filter as per sample for any capacity complete all as specified and directed.
M & L for Door handle of refrigerator of any capacity (as per sample) complete all as specified and directed.
M & L for Door lock with keys as per sample for refrigerator of any capacity complete all as specified and directed.
M & L for timer for refrigerator as per sample of any capacity complete all as specified and directed.
M & L for Door bulb screw/pin type for refrigerator as per sample of any capacity complete all as specified and directed.
M & L for Door Rubber bidding complete all as specified for any capacity complete all as specified and directed.
M & L for Door inner lining paneling complete all as specified for any capacity complete all as specified and directed.
M &L for Waste water bucket as per sample for any capacity complete all as specified and directed.
M & L for Vegetable tray as per sample for any capacity complete all as specified and directed..
M & L for Ice tray PVC 18 cubed as per sample for any capacity complete all as specified and directed.
M & L for PVC Chillar tray as per sample for any capacity complete all as specified and directed.
M & L for replacement of capillary not less then 7 feet for any capacity complete with jointing, brazing etc all as specified and directed.
S&F in replacement of pin-valve for any capacity complete with jointing, brazing etc all as specified and directed .
M & L for general Maintenance/ Servicing of Desert Cooler of any capacity installed in various buildgs of RTS & Depot including rectification of defects, testing & making smooth functional by replacing of worn-out spares including necessary T &P and consumables required for welding/brazing works etc complete all as specified and directed. Note - Spares/items, required shall be measured and paid separately for respective items).The following items shall be catered for replacement under item No. 265 above (Note : rates of fixing, testing, commissioning of following items (from item 266 to 277) below) deemed to be catered under as inclusive under item No-265above.)
M & L for replacement vertical pump with motor/ water lifting pump with motor 230 Volts, 50Hz & 2.80 mtr head complete all as specified and directed. Make Khaitan/Polar etc
M & L for replacement fan motor upto 1/3 HP, 230 Volts, 50 Hz, three speed including fan blade suitable for Desert Cooler of any size complete all as specified and directed. Make Khaitan/Polar etc
M & L for replacement side panel shutters made of 24 SWG GI sheet suitable for any dimension as per sample complete all as specified and directed.
M & L for replacement wood wool thick pad suitable for existing size panel of desert cooler including GI chicken wire mesh complete as approved and directed.
M & L for replacement 1400 rpm fan motor kit of size 450 mm sweep 180 watt single phase, AC 220/240 volts and making necessary connections all as directed Make : Khaitan, Polar, Champion etc
M & L for replacement of Plastic distribution (three way) of superior quality for desert cooler complete all as specified and directed
M & L for fan blade made of iron for desert cooler complete all as specified and directed.
M&L in replacement of desert cooler tank made of GI sheet 26 gauge including fixing complete all as specified and directed.
M & L for repair float valve plastic ball for 15 mm dia bore of pipe of desert cooler with ISI marked complete all as specified and directed.
M & L for repair PVC stop cock suitable for 15 mm dia GI pipe ISI Marked complete all as specified and directed.
M & L for repair PVC connection 15 mm dia with CP nut 450 mm long ISI Marked complete all as specified and directed.
Dismantling and taking out unserviceable water cooler 40/ 80 Ltrs capacity of any description from MES store yard transporting to workshop and segregation to serviceable and unserviceable parts and reassembling the same after replacement of defective parts and transporting back complete unit to MES store yard the job including cutting the copper suction tubing removing the strainer/ drier from the machine for replacement of gas filter, jointing, welding, brazing the copper filter testing the entire system with standing pressure and vacuum for 72 Hrs after necessary repairs to the system shall be charged with correct quantity of refrigerant gas to achieve required temperature with prescribed current rating and the same will be tested at the site complete all as specified and directed (Note :- New components/parts shall be measured and paid separately under respective items)
All as per Srl item No. 278 here in before but 120/150 Ltrs capacity water cooler. The following items shall be catered for replacement under item No. 278 & 279 above (Note : rates of fixing, testing, commissioning of following items (from item 280 to 292 below) deemed to be catered under as inclusive under item 278 & 279 above.)
Supply only Hermatically sealed unit (Compressor) for 120/ 150 Ltrs Cap incl Gas charging etc complete,
Supply only Hermatically sealed unit (compressor) for 40/ 80 Ltrs Cap incl Gas charging etc complete.
Supply only starting capacitor 80-100 Mfd Make : Usha, Asian,Unistar,Texla for 120/ 150 Ltrs capacity Water cooler
Supply only charging of R-134 gas in water cooler of capacity 40/80/120/150 Ltr to its saturation level all as specified and directed.
Supply only running capacitor 45 mfd Make : Usha, Asian, Unistar,Texla for 120/ 150 Ltrs/Hrs water cooler
Supply only starting relay (1022) Make : Renutrol, Sriram, Usha & Asian for 120 / 150 Ltrs / Hrs water cooler
Supply only starting relay (522) Make : Renutrol, Sriram, Usha & Asian for 120 / 150 Ltrs / Hrs water cooler
Supply only thermostat Make : Renutrol, Sriram, Usha & Asian for 120 / 150 Ltrs / Hrs water cooler
Supply only thermostat Make : Renutrol,Sriram,Usha & Asian for 40 / 80 Ltr water cooler
Supply only Over load protector Make : Renutrol, Sriram,Usha & Asian for 120/ 150 Ltr Water cooler
Supply only Over load protector Make : Renutrol, Sriram,Usha & Asian for 40 / 80 Ltr water Cooler
Supply only wiring kit complete, screwed & covered in box for 120/ 150 Ltr water cooler
M & L wiring kit complete, screwed & covered in box for 40/ 80 Ltr water cooler
M&L for cutting out rusted and deterioted portion of water cooler body sheet and supply and fixing MS sheet of 26 gauge and welding to the body of the cooler and two coats of synthetic enamel paint of the same colour over one coat of red oxide primer complete all as specified and directed
M & L fan motor suitable for 120/ 150 ltr water cooler complete all as specified and directed
All as per Srl item No. 294 here in before but 40/ 80 Ltr
M&L for cleaning condenser coil and storage tank with chemical base solution and soda water for removal of mud algae, fungus etc and necessary replacement of inlet and outlet pipes & nipple with gasket of water container of any size of water cooler complete all as specified and directed
M & L for replacement top cover of Water cooler 120/ 150 ltr capacity including gasket complete all as specified and directed
M & L for replacement top cover of Water cooler 40/ 80 ltr capacity including gasket complete all as specified and directed
M & L for replacement gasket of 120/ 150 Ltr capacity water cooler complete all as specified and directed
M & L for replacement gasket of 40/ 80 Ltr capacity water cooler complete all as specified and directed
M & L for replacement of float valve for 40/80/120/150 Ltr capacity water cooler complete with rod and ball all as spcecified and directed
M&L for detection and rectification of leakage in water cooler of any capacity copper capillaries by brazing and soldering and checking against specified pressure the jobs includes replacement of copper tube not exceeding 0.60 mtr in one job complete all as specified and directed
S&F in replacement of door lock with keys to water cooler of any capacity compete all as specified and directed
M&L for servicing of window type AC 1.5/2.0TR capacity from various location and any height, like first floor, for maintenance, opening cleaning with Magna/Hibird solution, giving water air pressure, oiling including taking out old unserviceable parts and fixing new part complete with re-fixing at existing place after repairing, servicing , welding testing etc all as specified and directed.
All as per Srl item No. 304 here in before but split type cap 1.5 /2TR capacity. The following items shall be catered for replacement under item No. 304 & 305 above (Note : rates of fixing, testing, commissioning of following items (from item 308 to 316 below) deemed to be catered under as inclusive under item 304 & 305 above.)
M & L for harmatically company sealed unit compressor of 1.5 TR capacity single phase 230 volt welding/brazing of gas pipe line, vacuum pressure leakage, testing etc supply and fixing including charging refrigerant gas as required complete all as specified .
M & L for harmatically company sealed unit compressor of 2.0 TR capacity single phase 230 volt welding/brazing of gas pipe line , vacuum pressure leakage, testing etc supply and fixing including charging refrigerant gas as required complete all as specified .
Supply only Starting capacitor 100-120 Mfd Make : Keltron / Sharda/ EPCOS
Supply only Running capacitor 45 Mfd Make : EPCOS/Unistar
Supply only Running capacitor 36 Mfd Make : EPCOS/Unistar
Supply only Running capacitor 4/6 Mfd -do-
Suppiy only Starting relay (as per sample) Make : Renutral/Sri Ram.
Supply only Over load protector (as per sample) Make : Sriram/Renutral
Suppiy only Liquid line Filter two way/one way
Supply only Thermostate switch with knob plate and screws Make-Indfoss
M & L for FHP motor single phase of capacity 1/6 HP , 900 RPM, 220 V for 1.5/2TR Capacity for window type AC/split AC complete all as specified. Make : Gulmarg/ National / AUE
M & L for Swing motor for window/split type A/C of 1.5/2 TR Cap as per sample complete all as specified.
M & L for replacement of nylon filter for 1.5/2.0 TR window/split AC capacity as per sample complete all as specified and directed.
M & L for replacement for cooling coil of following capacity 1.5 TR capacity window type AC including welding/ brazing of pipe line, charging of refrigerant gas and testing of leakage as required including taking out existing one complete all as specified.
All as per Srl item No. 320 here in before but split type cap 2TR capacity.
M & L for condenser coil of following capacity 1.5 TR capacity window type AC including welding/ brazing of pipe line, charging of refrigerant gas and testing of leakage as required including taking out existing one complete all as specified.
All as per Srl item No. 322 here in before but split type cap 2TR capacity.
M & L for replacement PVC front grills cover suitable for 1.5 TR to 2 TR capacity of window type AC of any make (as per sample) complete all as specified and directed.
M & L for charging of refrigerant gas (134a) in window type / Split AC's of any capacity after detecting the leakage and recifying including filling of refrigerant gas in the system and Installtion, testing complete all as directed.
M & L for replacement blower motor for outdoor/indoor unit complete for window/split type AC of capacity 2 TR complete all as specified and directed.
M & L for replacement fan blade of blower aluminium casted make Amtrex, Carrier etc for 2 TR cap complete all as specified and directed.
M & L for replacement of wiring kit for 1.5/2.0 TR AC complete all as specified and directed.
M & L for replacement of fan motor and to the any type AC 1.5 TR complete all as specified and directed.
M & L for replacement of fan motor and to the any type AC 2.0 TR complete all as specified and directed.
Supply, laying and jointing of copper pipe for suction / discharge of size 1/2" as rerquired at site including brazing and insulation work complete all as specified and directed.
All as per Srl item No. 331 here in before but of size 2/3" complete all as specified and directed.
M&L for replacement of PCB and to the any type AC 1.5 TR complete all as specified and directed.
M&L for replacement of PCB and to the any type AC 2.0 TR complete all as specified and directed.
M & L for general maintenance of Voltage Stabilizers of any capacity upto 5.0 KVA installed with electrical appliances in various locations of RTS & Depot including rectification of testing & making smooth functional by replacing of worn-out spares etc including necessary T&P and consumables required for welding/brazing works etc complete all as specified and directed. Note - Spares/items, gas etc required shall be measured and paid separately for respective items). The following items shall be catered for replacement under item No. 335 above (Note : rates of fixing, testing, commissioning of following items (from item 336 to 349 below) deemed to be catered under as inclusive under item No- 335 above.)
Supply only Transformer 1.2 to 2.4 Amp capacity any make
Supply only Transformer 4.8 to 7.2 Amp capacity any make
Supply only Transformer 9.6 to 12.0 Amp capacity any make
Supply only Circuit plate delux for power any make
Supply only Voltmeter analog type Make- BRT/ NEC / BE
Supply only Indicator make- Japani or equivalent as approved by GE
Supply only Relay for 2 KVA to 4 KVA 20 amps mini type complete all as specified and directed. Make- Tech/ Powerman
Supply only Relay for 5 KVA 25 amps mini type Make- Tech/ Powerman
Supply only Relay for 0.5 KVA to 1.0 KVA 10 amps mini type Make- Tech/ Powerman
Supply only Transformer mini 750 mA Make VMB/ Saira delux
Supply only Indicator lamps complete set
Supply only MCB relay switch
Supply only Terminal Connection 4 way.
M&L for providing high and low voltage cut out device, high low voltage cut off with time delay relay 2 to 3 minutes 2-3 minute over low voltage 180 volts AC and high voltage 260 Volt AC at every cut off for 4 & 5 KVA capacity voltage stablizer complete all as specified.
M&L for preparation of surface and Denting & spray painting of domestic type refrigerators 165/200 Ltrs cap, any description with two coats of synthetic enamel paint of existing shade on external surfaces all as specified and directed.
M&L for preparation of surface and Denting & spray painting of domestic type refrigerators 300/310 Ltrs cap, any description with two coats of synthetic enamel paint of existing shade on external surfaces all as specified and directed.
M&L for Denting & painting of desert cooler at site by disconnecting the electric connections and scraping old paint cleaning and preperation of surface by scrubbing and painting with one coat of anti corrosive paint internally and externally alongwith two coats of synthetic enamel paint externally on the surface of desert cooler all as specified and directed
M&L for scraping out old paint & Denting and preparation of surface of 120/ 150 Ltr water cooler and two coats with spray painting of synthetic enamel paint of existing colour over a coat of red oxide primer on external surface and two coats of black synthetic enamel paint on compressor complete all as specified and directed.
M&L for scraping out old paint & Denting and preparation of surface of 40/ 80 Ltr water cooler and two coats of spray painting of synthetic enamel paint of existing colour over a coat of red oxide primer on external surface and two coats of black synthetic enamel paint on compressor complete all as specified and directed.
M&L for Denting & spray painting of voltage stabiliser of any make and capacity at different location of Hempur of GE(E) Bly with one coat of super enameled synthetic paint of approved colour including scraping cleaning of old painted surfaces all as specified and directed.
S&F in replacement angle iron not les than 35X35x5 mm bent to any shape cut to length for making stands and holding frames for refrigerator/ desert cooler/ window Acs etc complete all as specified and directed
M & L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metres below normal ground level connected to galvanised earth lead wire 4 mm dia connected to test point by means of nut, bolts and washers made out of galvanised iron or steel all including earthing pit in PCC (1:3:6) type C1,RCC (1:2:4) type B1 precast cover slab with one handle made out of 8 mm dia round bar,20 mm dia (medium grade) protecation pipe and providing layer of charcoal or coke and salt in alternative layers,necessary earth work complete as shown in Electrical plate No 3 as specified or indicated including testng on completion.
S S CONSTRUCTION CO
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .