A/R AND M/O Govt. Office building HP PWD Division at Rajgarh(Sh Providing Prepainted GI sheet, wood work in celling, roof, Doors Windows etc.).

Amount

Providing and fixing 6 mm (Six millimetre) thick commercial ply wood ceiling of approved quality with butt jointing and nails (frame work and cover fillets to be paid for separately)

Providing and fixing plain square edged cover fillets (beading) 40mmx12mm section with wood screws in ceiling and lining including ,1st class deodar wood, as per drawing and HP.PWD technical specifications clause 802, 803, 1202 and 1203, in all leads and lifts to the entire satisfaction of engineer in charge.

Extra for making chamfered edges of beading, as per drawing and HP.PWD technical specifications clause 802, 803, 1202 and 1203, in all leads and lifts to the entire satisfaction of engineer in charge.

Providing woodwork in frames of doors,windows,clerestory,windows and other frames wrought, framed and fixed in position, 2nd class deodar wood, as per drawing and HP.PWD technical specifications clause 802, 803, 1202 and 1203, in all leads and lifts to the entire satisfaction of engineer in charge.

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws, 35MM thick, 2nd class deodar wood, as per drawing and HP.PWD technical specifications clause 802, 803, 1202 and 1203, in all leads and lifts to the entire satisfaction of engineer in charge.

Providing wood work in frames of false celling partitions etc. Sawn and put-up in position, 2nd class deodar wood, as per drawing and HP.PWD technical specifications clause 802, 803, 1202 and 1203, in all leads and lifts to the entire satisfaction of engineer in charge.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyester of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-charge.

Providing and fixing M.S. BP Sheet 1.66mm to 2mm thick in eaves board/facia /soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separately) ,as per drawing and HP.PWD technical specifications clause 802, 803, 1202 and 1203, in all leads and lifts to the entire satisfaction of engineer in charge.

Steel work welded in built up sections, trusses and framed work, including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint ,In beams joists channels ,angles , tee ,flats with connecting plates or angle cleats as in main and cross beams, hip and jack rafters,purlins connected to common rafters and the like, as per drawing and HP.PWD technical specifications clause 802, 803, 1202 and 1203, in all leads and lifts to the entire satisfaction of engineer in charge.

Providing wood work in trusses, purloins, rafters, posts, post plates, wall plates and the like wrought framed, hoisted and fixed in position, 2nd class deodar wood, as per drawing and HP.PWD technical specifications clause 802, 803, 1202 and 1203, in all leads and lifts to the entire satisfaction of engineer in charge.

Providing ridges or hips 60 cm over all in plain G.I.sheet with galvanised iron J or L hooks, bolts and nuts 8mm dia G.I. Limpet and bitumen washers complete, 0.63 mm thick sheet ,as per drawing and HP.PWD technical specifications clause 802, 803, 1202 and 1203, in all leads and lifts to the entire satisfaction of engineer in charge.

Providing valleys 90 cm over all in plain G.I. sheets fixed with galvanised iron J or L hooks, bolts and nuts 8mm dia G.I. Limpet and bitumen washers complete, 0.63 mm thick sheet ,as per drawing and HP.PWD technical specifications clause 802, 803, 1202 and 1203, in all leads and lifts to the entire satisfaction of engineer in charge.

ANIL THAKUR CONTRACTOR

RAVINDER KUMAR

Geeta Ram