COMPREHENSIVE MAINTAINANCE AND REPAIRS TO CERTAIN B/R AND E/M WORKS IN OTHER THAN MARRIED AND MARRIED ACCOMMODATION AT MILITARY STATION GANDHINAGAR

Amount

Attending day to day complaints of street light like burned wire, line/ cable fault, taking down unserviceable street lights and refixing and fresh connection of existing street lights (removing carbon/ rust) complete all as specified and as directed. Note : 1. If loged complaint are not done by contractor every day recovery should be made double of quoted rate. 2. Any T&P required for repairing of street light should be provided by the contractor.

Excavating in trenches not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth for foundation of pole, laying of cables in soft/ loose soil and getting out complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layer not exceeding 25cm with soil obtained from excavation complete all as specified and as directed.

Material and labour for providing dry river sand as in sand cushioning to UG cable including punning gently all as directed. Complete all as specified and as directed. Note: Depth after punning shall be measured and paid.

Removing excavated material (Soil) not exceeding 50meter and depositing where directed at a level not exceeding 1.5 meter above the starting point complete all as specified and as directed.

Supply and laying sub class old 'B' burnt bricks, size of brick 230mm x 115mm x 75mm, laid as cable protection cover complete all as specified and as directed.

Supplying & laying, XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire heavy duty underground cable with aluminium conductor, 1100 volt grade, of size 10 Sqmm 4 core, laid in trenches/ duct, passing through pipe/ duct or fixed on pole and connecting and testing complete all as specified and as directed.

Supply & fix in repair LED type street light fittings, IP-66, 60 Watt, pressure die cast aluminium housing with toughned glass & individual LEDs with secondary optics including taking out old unserviceable fitting of any type complete all as specified and as directed.

Supply & fix in repair LED type street light fittings, IP-66, 35 Watt, pressure die cast aluminium housing with toughned glass & individual LEDs with secondary optics including taking out old unserviceable fitting of any type complete all as specified and as directed.

Supply and fix in repair driver including surge protection 5/10 kv for 45 Watt to 70 Watt street lights complete including taking down old unserviceable driver complete all as specified and as directed.

Supply and fix, PVC insulated and PVC sheathed, 3core, multi stranded, copper FRLS conductor 1100 Volt grade, (confirming to IS-694/ 2010 with latest amendment), cable of size 2.5 Sqmm, for connecting flood light/ street light fitting passing through conduit or steel tubular pole complete all as specified and as directed of Make Havells.

Supply and fix in repair LED Flood light 70 watt 230 volt AC outdoor type with thermal management in multiple optics and equipped with IP 66 proection with impect and corrosion resistant complete all as specified and as directed.

Supply and fix in repair LED post top lantern LED type 20 watt 230 volt AC outdoor type with decorative post top for 360 degree indirect light IP65 protection with impect and corrosion resistant complete with driver and lamp complete all as specified and as directed.

Supply and fix in repair, Digital time switch, Electro mechnical type with programming using captive segments with 24 hrs timing setting, AC 230 V, AC contactor, (relay) 230 V, 40 Amps including 4 module weather proof cabinet IP-65 protection complete with electrical internal connection complete all as specified and as directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars complete all as specified and as directed.

Material and labour for fly ash brick work with old size, sub class 'B' bricks, straight or curved on plan exceeding 6 meter mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for brick work with old size, sub class 'B' bricks, straight or curved on plan exceeding 6meter mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for fly ash brick work with old size, sub class 'B' bricks, straight or curved on plan any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and as directed.

Taking down cement plaster on brick or stone wall including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

Material and labour for rendering cement plaster 15mm thick in double layer (First layer shall be 10mm thick in cement : sand (1:6) and second layer shall be 5mm thick CM (1:4) with liquid water proofing compound on brick work or concrete surfaces, complete all as specified and as directed. Note: WPC shall be measured and paid separately).

Material and labour for rendering cement plaster 10mm thick in cement mortar (1:6) on brick work or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering cement plaster 5mm thick in cement mortar 1:3 on fair faces of concrete in ceilings, chajjas, fins facia finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of wall and applying two coats of cement base paint over coat of cement primer complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over one coat of 3mm thick wall care putty complete all as specified and as directed.

Material and labour for preparing new plastered or unplastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed.

Material and labour for cutting uneven surfaces of concrete & cutting reinforcement from drops of fins & facias (thickness not exceeding 50mm) using necessary scaffolding and making good the disturbed portion with 5mm thick rendering in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

Removing existing water proofing/ black top treatment from parapet wall, removing material to a distance exceeding 1.5 Km but not exceeding 5.0 KM out side MD land complete all as specified and as directed

Material and labour for 25mm thick (average consolidated thickness) PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate), laid in slope 1:30 on roof as in padding, finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 10mm thick on fair faces of concrete surfaces as on PCC padding in cement mortar 1:3 mixed with liquid water proofing compound as per manufacturer instruction and finish the surface even and smooth without using extra cement for laying APP membrane at non-accessible roof (mumty) complete all as specified and as directed. (Note :- water proofing compound shall be measured and paid seperately).

Material and labour for water proofing treatment to non accessible roof slab by appling one coat of cold bituminous primer @ 0.30 liter/ sqm and conforming to IS-3384, laying APP based polyster modified membrane reinforced non wooven polyster of 3.50 Kg/Sqm (minimum) 3mm thick with plain polythene finished and sealing all the overlap 75mm in length side and 100mm in width side of membrane by torching including applying one coat of bituminous aluminium paint over membrane complete all as specified and as directed.

Supply only, liquid water proofing compound mixed as per manufacturer instruction mixed in cement concrete or cement mortar complete all as specified and as directed.

Removing rubbish to a distance exceeding 1.5 Km but not exceeding 5.0 Km out side MD land complete all as specified and as directed.

Taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and as directed.

Taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and as directed.

Taking up or down steel tubing and connections for 25mm bore of pipe complete all as specified and as directed.

Supply and laying of 20mm outer dia CPVC pipe SDR 11 fitting on walls/ ceiling or laying in floors including connection to old Galvanised Iron pipe if required complete all as specified and as directed.

Supply and fixing of 20mm outer dia CPVC elbow (3/4 x 1/2) with brass thread at one end for fixing of taps and other end plain complete all as specified and as directed.

Supply and fixing of 20mm outer dia CPVC Tee with brass thread at one end for fixing of taps and other end plain complete all as specified and as directed.

Cutting chases, pinning in, for brick walls, making good to facings for concealed water tubing cutting exceeding 10cm but not exceeding 20cm girth complete all as specified and as directed.

Supply and fixing, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 15mm bore of pipe complete all as specified and as directed.

Supply and fixing, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 20mm bore of pipe complete all as specified and as directed.

Supply and fixing, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 25mm bore of pipe complete all as specified and as directed.

Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors) for 15mm bore of pipe complete all as specified and as directed.

Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors) for 20mm bore of pipe complete all as specified and as directed.

Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors) for 25mm bore of pipe complete all as specified and as directed.

Supply and fixing in repair, 40mm bore, low density polyethelene pipe (LDPE) of pressure rating 6kgf/ sq.cm fixed to walls, ceilings or in floors complete all as specified and as directed.

Demolition and breaking up drain pipes of dia 110mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and as directed.

Demolition and breaking up drain pipes of dia 75mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and as directed.

Supply and fixing, 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack 'Z' clamp complete all as specified and as directed.

Supply and fixing, 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including 'Z' clamp complete all as specified and as directed.

Supply and fixing 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

Supply and fixing 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

Supply and fixing, 75mm bore PVC (SWR) bend, any radius complete all as specified and as directed.

Supply and fixing, 110mm bore PVC (SWR) bend, any radius complete all as specified and as directed.

Supply and fixing, in repair, PVC (SWR) floor trap, with Stainless Steel grating including jointing with solvent cement, dia of outlet 75mm complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exceeding 1.5 sq.m but not exceeding 4 sq.m each complete all as specified and as directed.

Taking down old shutters of any description exceeding 1 sqm but not exceeding 2 sqm each complete all as specified and as directed.

Material and labour for rolled mild steel angle iron work as in door frames, cooler stand drilled for fixing of hinges/ necessary welding work as for site requirement also fastening and fixing conforming to Fe-290 (Gde-E-165) complete all as specified and as directed.

Resecuring or easing & adusting without taking down of shutters exceeding 1.0 sqm and not exceeding 2.0sqm and adjusting without taking down complete all as specified and as directed.

Supply and fixing, in repairs, 18mm/ 19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice laminations and other side balanceing white lamination, including necessary side liping fixed with screws to timber frame work in cup boards, rebated or flat edged complete all as specified and as directed.

Supply and fixing, factory made solid panel PVC door shutter 30mm thick (style) any colour consisting of frame made out of mild steel tube for top and bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site complete all as specified and as directed.

Supply and fixing, solid PVC door frame of size 50mm x 47mm made out of 5mm any colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specifications complete all as specified and as directed.

Supply and fixing, 35mm thick 2nd class hard wood plain framed panelled shutter (two panel) with lock rail and panel of 12mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part -I), Klin seasoned and chemically treated and complete all as specified and as directed.

Supply and fixing, 35mm thick, 2nd class hard wood, factory made, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass. Sizes of members of shutters as specified in SSR Part-I, Section 8, Clause 8.24 (a) complete all as specified and as directed.

Supply only Novopan pre-laminated particle Board 6mm to 9mm thick suitable for Aluminium Door/ partition complete all as specified and as directed.

Supply and fixing, stainless steel butt hinges of size 100mm complete all as specified and as directed.

Supply and fixing, aluminium anodised, barrel tower bolts of extruded section with length of bolt 150mm and fixed complete all as specified and as directed.

Supply and fixing, butt hinges, medium weight, cold rolled, mild steel of size 100mm complete all as specified and as directed.

Supply and fixing, aluminium anodised, barrel tower bolts of extruded section with length of bolt 200mm and fixed complete all as specified and as directed

Supply and fixing, aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 250mm and fixed complete all as specified and as directed.

Supply and fixing, extruded aluminium alloy handles, fabricated type, anodised of size 150mm complete all as specified and as directed.

Supply and fixing, 140mm overall length floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and as directed.

Supply and fixing in repair 140mm overall length floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and as directed.

Supply and fixing, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fixing in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples/ wooden beading complete all as specified and as directed.

Hacking out old broken glass (any thickness) size or description from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads. Complete all as specified and as directed.

Supply and fixing 3mm thick plain sheet glass, ordinary quality and glazing not exceeding 0.5 Sqm in each pane fixed to steel window with glass putty complete all as specified and as directed.

Supply and fixing 3mm thick figured glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane. Complete all as specified and as directed.

Supply and fixing, 4mm thick, black tinted glass panes fixed to aluminium doors/ windows/ vents with necessary rubber gaskets complete all as specified and as directed.

Taking down steel window/ ventilator including grills of any description, not exceeding 1.5 Sqm each including making good disturbed surface of Jamb, soffit complete all as specified and as directed.

Taking down Aluminium doors/ window/ ventilator of any size & description complete all as specified and as directed.

Taking down aluminium door shutter from frame exceeding 1.0 Sqm but not exceeding 2.0 Sqm and refixing in same opening after repair of parts such as i.e. clip, easing, rubber beads, greasing/ oiling and including replacement of components i.e. middle rail, top rail and handle complete with locking arrangement, tower bolt and push handle for smooth functioning complete all as specified and as directed. NOTE: The unit quoted rate inclusive with replacement of any spare parts for required for smooth functioning and not any claim entertained on this account excluding door floor spring/ door closer.

Taking down of steel window shutter and refix the same after necessary repair work like welding, including replace of any type of mild steel hinge. Complete all as specified and as directed.

Supply and fixing, powder coated aluminium frame for doors, windows, ventilators & partition work with one or more rebates including joining cleat for fixing complete all as specified and as directed.

Supply and fixing, powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ runing meter including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Numbers in each door, hinges, anodised aluminum snap beading screws complete all as specified and as directed.

Material and labour for aluminium powder coated (powder coated of requried colour) three track sliding windows frame top & sides of size 92mm x 31.75mm x 1.30mm (section No 20621), bottom size 92mm x 31.75mm x 1.30mm (section No-20620) and shutter top & bottom of size 40mm x 18mm x 1.29 mm (section No-20844) and sides (handle) of size 40mm x 18mm x 1.29mm (section No-20846) and lock side shutter frame of size 40mm x 18mm x 1.29 mm (Section No 20845) with rubber gasket, beading and locking arrangement and rollers including stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 4mm thick glass (any shade) with necessary rubber beading gasket complete all as specified and as directed. Make:-Indal/ Jindal/ Hindalco.

Material and labour for aluminium powder coated (powder coated of requried colour) two track sliding windows frame top & sides of size 68.85mm x 31.75mm x 1.30mm (section No 20681), bottom size 68.85mm x 31.75mm x 1.20mm (section No 20619) and shutter top & bottom of size 40mm x 18mm x 1.29mm (section No-20844) and sides (handle) of size 40mm x 18mm x 1.29mm (section No-20846) and lock side shutter frame of size 40mm x 18mm x 1.29 mm (Section No 20845) with rubber gasket, beading and locking arrangement and rollers including making good to the disturbed portion complete including 4mm thick glass any shade with necessary rubber beading gasket complete all as specified and as directed. Make:- Indal/ Jindal/ Hindalco.

Supply and fixing of anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with chromium plated brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.

Supply and fixing framed work such as grills, grating with ends of bars shoulderd or rivetted or forcged into spikes, framed guard bars, barred iron doors congirming to FE 290 Gde E-165 complete all as specified and as directed.

Supply and fixing in repair four levers stainless steel mortice lock, vertical type size 100mm (as per sample) complete all as specified and as directed.

Supply only stainless steel mortice lock, four lever, verticle type, size 100mm (as per sample) complete all as specified and as directed.

Supply only cast iron body hydraulic door closer hydrualically regulated designation Number 3, universal type suitable for door shutters of 851mm to 1000mm in width and of weight between 61 Kg to 80 kg complete all as specified and as directed

Supply and fixing in repair only cast iron body hydraulic door closer hydrualically regulated designation Number 3, universal type suitable for door shutters of 851mm to 1000mm in width and of weight between 61 kg to 80kg complete all as specified and as directed.

Supply only double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

Supply and fixing in repair only double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and as directed.

Material and labour for 75mm thick cement concrete 1:3:6 type C1, (using 40mm graded stone aggregate) as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement, Joints of plinth protection shall be filled with bitumen mastic (1:3) complete all as specified and as directed.

Material and labour for 75mm thick cement concrete (1:2:4) type B-2 (using 40mm graded stone aggregate) as in flooring/ hard standing and finishing the surface even and fair without using extra cement complete all as specified and as directed.

Material and labour for 25mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in flooring finished fair and even to receive floor finishes complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar complete all as specified and as directed.

Material and labour for non skid coloured tiles any colour 7mm to 8mm thick (square/ rectangular), area of each tile exceeding 0.11 sqm and not exceeding 0.18sqm each in floors, set and jointed in neat cement slurry and pointed in coloured cement to match tiles, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

Material and labour for non skid coloured tiles any colour 7mm to 8mm thick (square/ rectangular), area of each tile exceeding 0.11 Sqm and not exceeding 0.18 Sqm each in skirting, set and jointed in neat cement slurry and pointed in coloured cement to match tiles, over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

Material and labour for machine cut kota stone slab, 20mm-25mm thick as in flooring laid over and including cement mortar screed bed of 20mm thick in CM (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Material and labour for machine cut kota stone slab 20mm-25 mm thick as in riser of steps, skirting, dado and pillar laid over and including rendering 10mm thick in cement mortar (1:4), jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Material and labour for glazed ceramic coloured tiles any coloured/ shed of size 450mm x 300mm x 6mm-7mm on vertical surface such as skirting, dados, risers to steps set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including rendering 10mm thick in cement mortar (1:4), complete all as specified and as directed.

Material and labour for heavy duty, exterior grade parking tiles (Durastone of Somany/ Endura of Jhonson or equivalent as approved by GE) of area of each tiles exceeding 0.08 Sqm and not exceeding 0.18 sqm as in floor surfaces, set, jointed and pointed in neat cement slurry with white cement and pigment over and including screed bed or bedding layer of 15mm thick cement mortar (1:6) complete all as specified and as directed.

Material and labour for 16mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms over 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as steps, cooking platform, and other similar situations complete all as specified and as directed.

Supply and fixing in repair 25mm dia, 1mm wall thickness stainless steel heavy duty curtain rod with decorative ball type side brackets supporting hook (as per sample) fix with wooden gutties complete all as specified and as directed.

Material and labour for preparation of new wooden surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

Material and labour for preparation of new steel surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over one coat of primer complete all as specified and as directed.

Supply and fixing, in repair stainless steel, tubular towel rail 20mm dia, D type, 600mm long complete all as specified and as directed.

Supply and fixing in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

Supply and fixing, in repair, stainless steel, soap dish holder complete all as specified and as directed.

Supply and fixing, in repair pillar taps fancy type cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed 15mm bore dia complete all as specified and as directed.

Supply only pillar taps fancy type cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed 15mm bore dia complete all as specified and as directed.

Supply and fixing, in repair toilet paper holder with flat recessed type stainless steel complete all as specified and as directed.

Supply and fixing in repair 200 Litre capacity PVC loft tank including fitting & fixture like float valve complete all as specified and as directed.

Supply and fixing in repairs chromium plated with long shank and cup (concealed type) 15mm bore stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

Supply and fixing, in repair, stop cock (angular type) with wall flange complete all as specified and as directed.

Supply and fixing in repair bib taps long body cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and as directed.

Supply only 32mm, waste fittings, brass chromium plated for glazed ware sink, basins with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

Supply and fixing, in repair, grating, square, 150mm x 150mm (with/ without waste hole) size of stainless steel heavy duty complete all as specified and as directed.

Supply only PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

Supply only PVC waste pipe 32mm bore of size 800mm long complete all as specified and as directed.

Supply and fixing, in repair, 10 litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets and connection to pipe or lever. complete all as specified and as directed.

Supply only 10 litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets and connection to pipe or lever. complete all as specified and as directed.

Supply and fixing, in repair, vitreous china wash basin, white, flat back of size 550mm x 400mm including brackets grouted in cement mortar 1:2 in wall complete all as specified and as directed. Note:- Supply only pillar taps, waste fittings, PVC connection, PVC waste pipe shall be measured and paid separately.

Supply and fixing, in repair health faucet with 1.0 meter brass flexibile tube and wall hook mounted type chromiun plate for EWC. Complete all as specified and as directed.

Supply and fixing, in repair, vitreous china, semi pedestal pattern (Anglo Indian Type) wash down water closet pan including S or P trap (pedestal pattern), white with seat cover (including fixing bolts but excluding flushing cistern and flush pipe) complete all as specified and as directed.

Supply and fixing, in repair, vitreous china squatting pan, 'Orissa’ pattern, white of size 580mm x 440mm with integral foot rest (excluding flushing cistern and flush pipe) and 'S' or 'P' trap & necessary PCC required basis complete all as specified and as directed.

Supply and fixing, in repair, brass chromium plated shower rose with or without swivel joint, 125mm size complete all as specified and as directed.

Supply and fixing, in repair, vitreous china wash down water closet pan including S or P trap (pedestal pattern), white with seat cover (including fixing bolts but excluding flushing cistern and flush pipe) complete all as specified and as directed.

Supply and fixing mild steel work in weather shed posts, main and cross beams, hip and jack rafters, purlins, including special shaped washer complete using ERW or induction butt welded tubes, conforming to IS 1161-1979, Gde St-240 complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed

Supply and fixing, in pre-painted galvalume aluminium zinc coating galvanised iron based corrugated steel sheet, 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling of Asbestos cement corrugated sheet in roof covering complete all as specified and as directed.

Labour only 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, wall fixed with L-type or J-type or cranked hook bolts complete all as specified and as directed.

Material and labour for 6mm thick asbetos cement, corrugated or semi-corrugated sheets in roofs, wall fixed with L-type or J-type or cranked hook bolts complete all as specified and as directed.

Supply and fixing in repair chromium plated wall mixer with bend pipe for overhead shower Cat. Number F2014401 of Cera or equivalent. Complete all as specified and as directed.

Supply and fixing, in repair, jet spray with 1.50 meter PVC tube (stainless steel), chromium plated for vitreous china padestal pattern water closet complete all as specified and as directed.

Supply and fixing, in repair chromium plated Bib Cock 2 in 1 with single handle and wall flange Cat. Number F2014163 of Cera or equivalent. Complete all as specified and as directed.

Supply and fixing in repair 32mm Bottle trap of PTMT having minimum water seal of 25mm (Minimum weight 32mm-260 grams) complete all as specified and as directed.

Supply and fixing in repair chromium plated central hole basin Mixer with 450mm braided connection pipe (without pop-up) Cat Number F2014461 of Cera or equivalent. Complete all as specified and as directed.

Taking down carefully copper/ aluminum point wiring (light, fan,socket or power) complete, including fixture and fitting such as as switches, ceiling roses, pendants, regulators, sockets excluding light fittings, removing materials to store for keeping in safe custudy or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, ceiling, floor to match with the existing surface. complete all as specified and as directed.

Material and labour for point wiring with and including multistranded copper conductor 1.5 sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number drawn in PVC conduit concealed wiring and including medium grade PVC conduit 20mm in size, fire resistant, ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes including multistranded copper conductor 1.5 sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire and including pressed steel sunken concealed terminal box with 3mm thick industrial laminated sheet cover for mounting switches, sockets and fan regulators complete all as specified and as directed for the following :-

(a) One light/ fan/ exhaust fan point controlled by one switch

(b) One 5 Amps socket on Independent board.

(c) One 5 Amps socket on the same board.

(d) One bell buzzer point controlled by one push buttons independent

Supply and fixing in repair switch piano, flush button single pole, one way 5 Amps complete all as specified and as directed.

Supply and fixing in repair socket outlet 2 in 1, 3 pin, 5Amps, flush type complete all as specified and as directed.

Supply and fixing in replacement socket outlet 2 in 1, 3pin, 5 Amps, flush type complete all as specified and as directed.

Supply and fixing in repair switch socket combination 2 in 1, 3 pin, 5 Amps & 15 Amps flush type complete all as specified and as directed.

Supply and fixing in replacemet switch socket combination 2 in 1, 3 pin, 5 Amps flush type complete all as specified and as directed.

Material and labour for point wiring with and including multistranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number drawn in PVC Conduit concealed wiring and including medium grade PVC conduit 20mm in size, fire resistant, ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes including multistranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire and including pressed steel sunken concealed terminal box with 3mm thick industrial laminated sheet cover for mounting switches, sockets and fan regulators complete all as specified and as directed for the following :-

Material and labour for point wiring with and including multistranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number drawn in PVC Casing caping wiring and including medium grade PVC Casing caping 32mm in size, fire resistant, ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes including multistranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire and including pressed steel sunken concealed terminal box with 3mm thick industrial laminated sheet cover for mounting switches, sockets and fan regulators complete all as specified and as directed for the following :-

(a) One light/ fan point controlled by one switch

(b) One 5 Amps socket on Independent board.

(c) One 5 Amps socket on the same board.

(d) One bell buzzer point controlled by one push buttons independent

Material and labour for point wiring with and including multistranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number drawn in PVC casing caping wiring and including medium grade PVC casing caping 32mm in size, fire resistant, ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes including multistranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire and including pressed steel sunken concealed terminal box with 3mm thick industrial laminated sheet cover for mounting switches, sockets and fan regulators complete all as specified and as directed for the following :-

Supply and fixing in repair Bell push, flush type single pole, 5 Amps complete all as specified and as directed.

Supply and fixing in repair Ceiling rose, PVC/ poly carbonate, isolated body three terminals, complete all as specified and as directed.

Material and labour for ceiling fan regulators, electronic step type, AC, 230 Volts complete all as specified and as directed.

Supply and fixing in repair lamp holder, insulated body with back plate for batten fittings complete all as specified and as directed.

Material and labour for bell electric, Dingdong type A.C. 230 Volts, single pole complete all as specified and as directed.

Supply and fixing in repair Distribution Board SPN 8way, 240 volts, factory made powder coated, double door with neutral and earth link, suitable for fixing MCBs complete including connecting all as specified and as directed.

Material and labour in replacement for sub-main wiring with 2 single core 2.5 Sqmm PVC insulated, unsheathed, 1100Volts grade, copper multi stranded conductor drawn in and including PVC casing caping ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes including multistranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire drawn through and connected to main switch/ DB and testing on completion. Complete all as specified and as directed. Note: (i). 2 run of main conductor and one run of earth conductor shall be measured as one length.

Supply and fixing in repair distribution board power line VTPN , 4 way, 415 volts, factory made powder coated, double door with neutral and earth link, suitable for 4 pole MCCB 63 Amps for incoming supply and including 12 Numbers single pole MCBs 6 Amp to 32Amp for out going supply complete all as specified and as directed.

Supply and fixing in repair MCB’s single pole, 6 Amps to 32 Amps 240 volts with ‘C’ curve, 10KA, fixed in sheet metal board complete including connecting. Complete all as specified and as directed.

Supply and fixing in repair MCB’s SPN 40 Amps 240 volts with ‘C’ curve, fixed in sheet metal board complete including connecting. Complete all as specified and as directed.

Supply and fixing, in repair, MCCB three pole and neutral 16KA, 63 Amps, 415Volts. complete all as specified and as directed.

Supply and fixing, in repairs, LED light fitting, 1 x 20 Watt, 220 V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed

Supply and fix LED light fitting 1 x 10 Watt bulk head luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing in repair LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and led lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fix in repair LED type Bldg security light fittings, IP-66, 25 Watt, pressure die cast aluminium housing with toughned glass & individual LEDs with secondary optics including taking out old unserviceable fitting of any type complete all specified and as directed.

Supply and fix in repair decorative wall mounting light, brushed nickel finished with acrylic diffuser sutiable for 9 watt LED lamp B22 base toughned glass with secondary optics including taking out old unserviceable fitting of any type complete all specified and as directed.

Material and labour in replacement sub-main wiring with 2 single core 4 Sqmm PVC insulated, unsheathed, 1100 Volts grade, copper multi stranded conductor drawn in PVC casing and capping ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes including multistranded copper conductor 4.0 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire drawn through and connected to main switch/ DB and testing on completion. complete all as specified and as directed. Note: (i). 2 run of main conductor and one run of earth conductor shall be measured as one length.

Material and labour for earthing and testing complete with galvanized iron earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 Meter below normal ground level with top edge plate at a depth not less than 1.5Meter below normal ground level connected to and including earth lead galvanised iron wire 4.0mm dia, by means of bolts and nuts, check nuts and washers made of galvanised iron and connected to panel/ distribution board and earthing test point and earth dolly all as shown in elect plate Number 3 of SSR Part-1 including necessary earth work,excavation PCC chamber cover with handle (PCC 1:2:4) including 20mm dia galvanised iron pipe of medium grade for watering and 15mm dia galvanised iron pipe of light grade for protection of earthing lead, wire mesh, funnel, charcoal dust, common salt, copper lugs complete all as specified and as directed .

Supply and fixing in repair 5 Amp Plug Top complete all as specified and as directed

Supply and fixing in repair 15 Amp Plug Top complete all as specified and as directed

Supply and fixing in repairs, sheet metal enclosures, single pole & neutral with a two pin & earth plug and socket complete with one single pole, MCB of 20Amps, 10 KA, 240 volts complete all as specified and as directed.

Supply, installation, commissoning and testing, factory made, LT Metal Box, wall mounted board made out of CRCA sheet of 2 mm thick indoor type totally enclosed weather, dust and vermin proof with front opening hinged door and locking arrangement mounted on mild steel flat iron (40mm x 6mm and 6" long) 04 Number clamp welded to 40mm x 40mm x 5mm size angle iron frame alround panel body duly grouted on wall, 415 volts 3 phase, 4 wire AC 50 HZ having aluminium bus bar insulated with PVC sleeves, space for fixing single phase KWH electric meter of suitable capacity 04 Numbers, copper lugs, spacers, mounting channels, rubber gasket, locking knobs, hylam sheet pieces, PVC shrinkable sleeves, nuts and bolts, washers and suitable size single core copper wire connections, suitable compartments and epoxy powder spray paint with primer complete all as specified including the following accessories including taking down old unserviceable distribution board, taking down and refixing serviceable electric KWH meter in new panel (all as per sample)

Complete comprising the followings :- (a) Incoming supply:- (i) MCCB, 415 Volts, 4 Pole, 25 KA breaking capacity of 63 Amps - 01 Number. (ii) R-Y-B phase, LED indicating lamp - 03 Numbers (iii) 200 Amp TPN main aluminium bus bar (b) Outgoing supply:- (i) MCB, SPN, 40 Amp, 10 KA = 04 Numbers (ii) Space for mounting single phase energy meter - 04 Numbers (iii) Copper cable 6Sqmm wire and open terminals for all feeders.

Material and labour for point wiring with and including multistranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number drawn in and including medium grade PVC casing and capping double lock type 32mm in size, fire resistant, ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes including multistranded copper conductor 2.5 Sqmm stranded copper conductor cable as earth continuity conductor and connected to common earth dolly, including modular cover plates with frames and modular flush boxes for mounting for housing the switches socket outlets, fan regulators. complete all as specified and as directed for the following :- Note: Wiring to be connected with modular switch, socket fan regulator.

Supply and fixing of modular switch, one way 6 Amps one Module complete all as specified and as directed. Make - Roma, indoasian, honeywell

Supply and fixing of modular socket 6 Amps, 2/3 pin combined 2 module complete all as specified and as directed. Make - Roma, indoasian, honeywell

Supply and fixing of modular socket 6 Amps & 16Amps, 2/3 pin combined 2 module complete all as specified and as directed. Make- Roma, indoasian, honeywell

Supply and fixing of modular switch one way 16 Amps, 1 module complete all as specified and as directed. Make- Roma, indoasian, honeywell

Supply and fixing of modular Bell push, flush type single pole, 6 Amps complete all as specified and as directed.

Supply and fixing of modular fan regulators, electronic step type, AC, 230 Volts complete all as specified and as directed. Make - Roma, indoasian, honeywell

Supply and fixing in repair modular switch, one way 6Amps one Module complete all as specified and as directed. Make - Roma, indoasian, honeywell

Supply and fixing in repair Modular socket 6 Amps, 2/3 pin combined 2 module complete all as specified and as directed. Make - Roma, indoasian, honeywell

Supply and fixing in repair Modular socket 6 Amps &16 Amps, 2/3 pin combined 2 module complete all as specified and as directed. Make- Roma, indoasian, honeywell

Supply and fixing in repair Modular fan regulators, Electronic step type type, AC, 230 Volts complete all as specified and as directed. Make - Roma, indoasian, honeywell

Supply and fixing in repair Modular switch one way 16Amps, 1 module complete all as specified and as directed. Make- Roma, indoasian, honeywell

Supply and fixing in repair switch piano, flush button single pole, one way 5 Amps. complete all as specified and as directed.

Supply and fixing in repair socket outlet 2 in 1, 3 pin, 5 Amps, flush type complete all as specified and as directed

Supply and fixing in repair socket outlet multipurpose, 3pin, 5 Amps &15 Amps flush type complete all as specified and as directed.

Supply and fixing in repair switch piano flush button single pole, one way 15 Amps complete all as specified and as directed.

Supply and fixing in repair Bell push, flush type single pole, 5 Amps complete all as specified and as directed.

Supply and fix in repair LED street security light fittings, IP-65/ 66, 35 Watt, Pressure die cast aluminium housing with toughned glass & individual LEDs with secondary optics including taking out old unserviceable fitting of any type complete all as specified and as directed.

Supply and fix in repair LED luminaire 600mm x 600mm, 35 watt/ 36 watt, 220 Volt AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size all as specified and as directed .

Supply and fix in repair decorative wall mounting light, Gold finish fixture with glass diffuser suitable for 9 watt LED filament lamp B27 base toughned glass with secondary optics including taking out old unserviceable fitting of any type complete all as specified and as directed.

Supply and fixing of pre-painted galvalume aluminium zinc coating galvanised iron based plain steel sheet, 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply only Bitumen primer for use in water proofing and damp-proofing treatments complete all as specified and as directed.

Demolition of wall and ceiling boards (fibre, pulp, insulation) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

Material and labour for non asbestos, fibre reinforced designer cement board ceiling, 4mm thick (610mm x 610mm) with hot-dip galvanised iron heavy duty suspended ceiling gird system T-2420 all as per manufactures instructions. complete all as specified and as directed. (Make: M/S Everest Industries Ltd or equivalent)

Supply and fixing of 16mm thick mineral fibre tile 'RH - 99 Classic lite' with suspension system complete all as specified and as directed.

Supply and fixing of hollow PVC wall lining consisting of 5mm thick any shade PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing complete all as specified and as directed

Material and labour for PCC 1:2:4 type B-2 (40mm graded stone aggregate) in foundation, sub base, filling and mass concrete complete all as specified and as directed.

Material and labour for preparation of new steel surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over one coat of primer complete all as specified and as directed.

Material and labour for preparation of old treated steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Supply and fixing in repair Gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe for 20mm bore of pipe complete all as specified and as directed.

Supply and fixing, 110mm bore PVC (SWR) junction single , (Single T) equal or unequal with access door complete all as specified and as directed.

Supply and fixing, 75mm bore PVC (SWR ) junction single , (Single T) equal or unequal with access door complete all as specified and as directed.

Supply and fixing of 110mm PVC (SWR) vent cowl complete all as specified and as directed

Supply and fixing of 75mm PVC (SWR) vent cowl complete all as specified and as directed.

Supply and fixing in repair Bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and as directed.

Shree Builders

SNEH TRADERS

M/s Bombay Novelty Stores

Ramdev and Sons

K K Construction Co

M/s SK Traders

SHOBHIT BUILDERS