Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.0 LAccepted-AOC PO PS RUPA DIST WEST KAMENG ARUNACHAL PRADESH PIN 790 003 | WEST KAMENG | ARUNACHAL PRADESH | 790003 | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹41.2 L+₹2.2 L (5.59%)Rejected-Finance P O P S THRIZINO WEST KAMENG A P PIN 790 002 | WEST KAMENG | ARUNACHAL PRADESH | 790002 | L2 | Rejected-Finance HIGH BID VALUE | |
| 3 | L3₹45.1 L+₹6.1 L (15.6%)Rejected-Finance | L3 | Rejected-Finance HIGH BID VALUE | |
| 4 | Rejected-Technical 1 A BASEMENT 30 31 RAJA HOUSE NEHRU PALACE NEW DELHI 110 019 | SOUTH EAST | DELHI | 110019 | - | Rejected-Technical The firm revoked offer vide letter No Nil dt 24 Feb 2026. |
| Sl No | Description | Qty | Unit | M/S R D TRADERS L1 | M/S KUMAR CONSTRUCTION L3 | M/S KUNKAPU ENTERPRISES L2 |
|---|---|---|---|---|---|---|
| 1.00 | Supplying, installation, connecting, testing and commissioning of ISI marked outdoor type distribution transformer of 315 KVA, 11/0.433 KV, 3 phase, 50 Hz, ONAN cooled oil immersed copper wound step down enrgy saving ( level 2) floor mounted complete with first filling ISI marked filtered & dehydrated transformer oil and other standard fittings / accessories and 7 position off circuit tap changer (tapping range +/- 7.5% in steps of 2.5% each) with vector group DYN -11 complete all as specified and as directed by the Engineer in Charge. Note - (i) The ambient temprature shall be 48 degree Centigrade when measured by the resistance method after continuous full load run . (ii) The transformer shall be complete with standard fittings all as specified and conforming to IS:335 of 1993 for oil and IS: 1180 Part -I of 2014 for transformer and comprising of followings:-
(i) Oil conservator with oil filling hole cap and drain plug. (ii) 01 No of prismatic oil level gauge mounted on conservator wall with first fill of charge upto maximum level. (iii) Silica gel dehydrating breather with oil seal and with first fill of charge. (iv) Pressure release valve with automatic resetting arrangement after release of pressure- 01 Set. (v) Adequate No of thermometer pocket including one thermometer. (vi) Top oil filter valve. (vii) Bottom oil filter cum drain valve. (viii) Rating diagram and terminal marking plate.(ix) Earthing terminal - 02 Nos. (x) Lifting lugs - 01 Set. (x) Jacking pads - 01 Set. (xi) Under carriage with 4 Nos of plain rollers. (xii) Air release plug on main transformer tank. (xiii) Adequate Nos of cooling radiators. (xiv) 100 mm dial type oil temperature indicator with maximum read pointer and resetting device. (xv) 100mm dial type winding temperature indicator with maximum read pointer resetting device. (xvi) Air insulated cables box on HV and LV side. (xvii) Buchholz Relay (having Contacts for Alarm & Trip). (xviii) OTI (having Contacts for Alarm & Trip). (xix) WTI (having Contacts for Alarm & Trip). (xx) Marshalling Box (having TTB Only).
Note : (i) PCC foundation of adequate /required size extending 500mm all round more than size of Transformer, as per manufacturer design shall be included in quoted Rate.
(ii) Prior to manufacture the contractor shall get the general arrangement, drawing and design details of the Transformer from GE.
(iii) After installation of Transformer at site , the pre-commissioning test shall be carried out by SEI/EI / Rep of Accepting Officer and the cost deemed to be included in the quoted rates.
(iv) Contractor shall arrange for factory visit for rep of Accepting Officer to check routine tests as per IS : 2026. | 1 | Each | 24,08,000 ₹24,08,000 Lowest | 27,80,000 ₹27,80,000 | 25,20,000 ₹25,20,000 |
| 2.00 | M & L for switch air break gang operated triple pole out door type unit on HT 11 KV 50 cycle AC suitable for current rating upto 200 Amps mechanically operated mounted on insulators (12 insulators) with Drop out fuse unit frame with operating mechanism worked from ground level with earth switch and including locking arrangement complete all as specified and directed. | 1 | Each | 18,000 ₹18,000 Lowest | 32,000 ₹32,000 | 20,000 ₹20,000 |
| 3.00 | S & F Lightning arresters expulsion type complete with all fittings, transmission class 11 KV, discharge capacity 65 kilo amp complete all as specified and directed | 1 | Each Set | 16,000 ₹16,000 Lowest | 30,000 ₹30,000 | 20,000 ₹20,000 |
| 4.00 | S & F Danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for HT, 25x20cm size complete all as specified and directed. | 2 | Each | 350 ₹700 Lowest | 450 ₹900 | 350 ₹700 Lowest |
| 5.00 | Supply, laying & testing HT cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 95 Sqmm 3 core complete all as specified and as directed. | 30 | RM | 2,150 ₹64,500 Lowest | 2,300 ₹69,000 | 2,200 ₹66,000 |
| 6.00 | Supply and fix cable jointing kit for 11 KV grade cable for outdoor termination , heat shrink type, joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, Al conductor cable of size 95 sqmm 3 core complete all as specified and directed. | 2 | Each | 18,000 ₹36,000 Lowest | 28,000 ₹56,000 | 20,000 ₹40,000 |
| 7.00 | Supplying laying jointing, testing & commissioning in trenches, fixed on poles/ drawing through pipes LT XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables, heavy duty with stranded aluminium conductor, 1100 volts grade (Earthed) crossectional area size of 400 sqmm 3.5 core complete all as specified and directed. Make ;- Havells/KEI/Finolex/Polycab | 25 | RM | 3,200 ₹80,000 | 4,200 ₹1,05,000 | 3,100 ₹77,500 Lowest |
| 8.00 | Supplying laying jointing, testing & commissioning in trenches, fixed on poles/ drawing through pipes LT XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables, heavy duty with stranded aluminium conductor, 1100 volts grade (Earthed) crossectional area size of 185 sqmm 3.5 core complete all as specified and directed. Make ;- Havells/KEI/Finolex/Polycab | 250 | RM | 1,600 ₹4,00,000 Lowest | 2,500 ₹6,25,000 | 1,700 ₹4,25,000 |
| 9.00 | Design, fabricate, supply, testing and commisioning of CPRI approved factory made LT Panel Board double door, out door type fabricated out of 3.15mm thick CRCA sheet steel for outer body and 2.00mm thick CRCA Sheet for inner partition walls, independent cabinate with cabinate doors for MCCBs, Bus Bars, cable trays, metering equipment, vertical type floor mounted on angle iron frame of ISA 45x45x5mm with minimum height of legs 45 cm, minimum IP-54 protection, comprising of solid aluminium bus bar 4 strips suitable of 1000 Amps, suitablily grouted to PCC complete with internal wiring, epoxy powder coated, connections of cable ends with suitable size of aluminium cable lugs with the following accessories.
Make of MCCB - Havells / L&T / Legrand / Schneider/ABB
(a) INCOMING
(i) MCCB 500 Amps, 4 Pole, 415 V, 36 KA - 01 No
(b) OUTGOING
(i) MCCB 320 Amps, 4 Pole, 415 V, 36 KA - 02 Nos
(ii) MCCB 125 Amps, 4 Pole, 415 V, 25 KA - 01 Nos
(iii) MCCB free space for 320 Amps
(iv) Digital Ammeter of size 4"x4" - 01 No
(v) Digital volt meter of size 4"x4" - 01 No
(vi) Selector Switch for Amp/Volt Meter - 02 Nos
(vii) Current Transfer (CT) - 3 Nos
(viii) Phase indicator lamp (RYB) set of three - 01 Nos | 1 | Each | 4,50,000 ₹4,50,000 | 3,85,000 ₹3,85,000 Lowest | 5,00,000 ₹5,00,000 |
| 10.00 | Excavation in trenches n. exc 1.5 mtr wide and n. exc 1.5 mtr depth for pole / cable / foundation etc including getting out in soft /loose soil complete all as specified and directed. | 50 | Cum | 810 ₹40,500 | 650 ₹32,500 Lowest | 800 ₹40,000 |
Tender Value
₹39 L
EMD Value
₹78,000
Closing Date
2 Feb 2026, 6:00 pmClosed
SHRI SAURABH, IDSE, CWE
HQ CWE Tenga PIN-900194 c/o 99 APO
PROVN OF 315 KVA TRANSFORMER AND CONNECTED ITEMS AT RUPA UNDER GE TENGA
2026_MES_748087_1
8603/E8
Open Tender
Civil Works
Item Rate
180 days
GE TENGA
D b (ii)
8 documents required · 8 mandatory
₹500
Yes
GE TENGA
₹78,000
Yes
26 Mar 2026
12 Jan 2026
9 Feb 2026
12 Jan 2026
2 Feb 2026
26 Jan 2026
Material and labour of Cross arms, bracings, supports,clamps and back plates fabricated from structural steel sections including nuts, bolts, washers,welding, bending cold or hot,drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as directed by Engineer-in-Charge.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.74 MB
TENDERDOCUMENTS8603.rar
Tender Documents • 1.96 MB
BOQ_837756.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .