Micro Irrigation- Construction of Pond and Tank,Installation of pumpset, laying pipe line and providing micro sprinkler at Mullenthandu - Muthuvakudi area in ward no.6 of Rajakumary Panchayath

Amount

Appendix A - Construction of Pond

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

2.7.1 : Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock

2.26.2 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.Ordinary or hard rock

60.2.2 : Bailing out water Using 5HP Pump- Bailing out water with 5HP engine and pump set including conveyance to site and erection,cost of fuel, lubrication oil and other stores, pay of staff etc complete

60.7.1 : DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site

5.1.3 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

4.3.1 : Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

4.1.5 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

60.7.2 : DR PACKING Under foundation - Dry stone packing under foundation with good quality blasted rubble including conveyance of material and labour charges etc. complete as per direction of departmental officers at site.

Appendix B - Construction of Tank

60.5.2 : DOWEL BARS - Supplying and providing MS dowel bars of size 16 mm dia of 2m long (1m in rock and 1m in concrete ) including drilling holes of 20mm dia to a depth of 1m in rock and filling the gap with cement grout( 0.10kg/each) etc complete.

2.7.3 : Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Hard rock (blasting prohibited

5.1.3 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

5.2.2 : Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

4.3.2 : Centering and shuttering including strutting, propping etc. and removal of form work for:Retaining walls, return walls, (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

50.13.1 : 9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete

18.31.1.1 : Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertion etc. (the tail pieces if required will be paid separately):100 mm diameterClass I

od31740/2020_2021/IA : Conveying and fixing G.I. pipes complete with G.I. fittings including all Charges etc. complete.65 mm dia nominal bore

16.60.1 : Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminimum sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - lll of ASTM-D-4956-01 as approved by Engineer-in-Charge, letters, borders etc. as per IRC: 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class ll of ASTM -D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminimum alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminimum sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the Engineer-in-Charges. (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment ).Overhead informatory road signage

Appendix C - Providing Pmpset and Micro sprinkler

od23517/2020_2021/IA : Supplying and erecting 10HP CV 46 model vertical open well Sub immersible pumpset with all cost ofmechinaries, labour charges , conveyance etc complete as per the directions of departmental officers at site

od23585/2020_2021/IA : Supplying and fixing delivery suction fittings including 63mm Non Return Valve HDP coler with all cost ofmaterials, labour ,conveyance etc complete as per the directions of departmental officers at site

od23847/2020_2021/IA : Supplying and fixing 10HP three phase starter with single phasing parameters with all cost ofmaterials, labour ,conveyance etc complete as per the directions of departmental officers at site

od23588/2020_2021/IA : Supplying and fixing 3 core copper cable 6 sq.mm with all cost of materials, labour charges,cost of fittings, conveyance,including all cost of trenching,backfilling and laying as per lines and levels ifany, etc as per the directions of departmental officers at site

od23591/2020_2021/IA : Supply of HDPE Pipe, ISI PE 63 grade PN 8, 90mm Dia including all charges for laying to lines ,levels and alignment joining and testing after completion.

od23592/2020_2021/IA : Supply of HDPE Pipe, ISI PE 63 grade PN 6, 63mm Dia including all charges for laying to lines ,levels and alignment joining and testing after completion.

od23593/2020_2021/IA : Supply of HDPE Pipe, ISI PE 63 grade PN 6, 50mm Dia including conveyance and all charges for laying to lines ,levels and alignment joining and testing after completion.

od23594/2020_2021/IA : Supply of LLDP Pipe,ISI 20mm Dia for lateral pipe including conveyance and all charges for laying to lines ,levels and alignment joining and testing after completion.

od23595/2020_2021/IA : Supplying and fixing flower type micro sprinkler with fitting accesseries including washers , FTA two way stick, oneway stick etc. with all cost of materials, labour charges,cost of fittings, conveyance, cost of trenching,backfilling and laying as per lines and levels if any, etc as per the directions of departmental officers at site

od23597/2020_2021/IA : Supplying and fixing Sand filter with all cost of materials, labour charges, cost of fittings, conveyance,including all cost of trenching,backfilling andlaying as per lines and levels if any,etc as per the directions of departmental officers at site.

od23598/2020_2021/IA : Supplying and fixing of 50mm C I Ball valve with all cost of materials labour conveyance etc complete as per the directions of departmental officers at site

od23599/2020_2021/IA : Supplying and fixing of 63mm C I Ball valve with all cost of materials labour conveyance etc complete as per the directions of departmental officers at site

od23600/2020_2021/IA : Supplying and fixing PVC Service Saddle 50mm to 20mm dia for air valve with all charges complete

od23601/2020_2021/IA : Supplying and fixing MS Service Saddle 40mm to 25mm dia for air valve with all charges complete

od23603/2020_2021/IA : Supplying and fixing of 20mm Air valve with all cost of materials labour conveyance etc complete as per the directions of departmental officers at site

od23604/2020_2021/IA : Supplying and fixing G I Reducer 25mm to 12mm dia with all charges complete

od23605/2020_2021/IA : Supplying and fixing PVC Service Saddle 40mm to 25mm dia with fittings for lateral pipe connection with all charges complete

od23606/2020_2021/IA : Providing and fitting PVC Tee of dia 25mm to 20mm with all charges

od23608/2020_2021/IA : Supplying and fixing of 32mm C I Ball valve threaded with ABS handle including all cost of materials labour conveyance etc complete as per the directions of departmental officers at site

od23609/2020_2021/IA : Supplying and fixing of 20mm GI Stopper valve with all cost of materials labour conveyance etc complete as per the directions of departmental officers at site

od23610/2020_2021/IA : Supplying and fixing of 20mm starter connected to lateral pipe with all cost of materials labour conveyance etc complete as per the directions of departmental officers at site

od23612/2020_2021/IA : Supplying and fixing 20mm dia GI end closer with all charges complete

od23613/2020_2021/IA : Supplying and fixing 50mm HDPE coller with all charges complete

od23614/2020_2021/IA : Supplying and fixing 40mm HDPE coller with all charges complete

od23615/2020_2021/IA : Supplying and fixing 50mm GI Tee with all charges complete

od23616/2020_2021/IA : Supplying and fixing nipple 25mm with all cost of materials, labour charges, cost of fittings, conveyance,including all cost of trenching,backfilling and laying as per lines and levels if any etc as per the directions of departmental officers at site

od23617/2020_2021/IA : Supplying and fixing nipple 50mm with all cost of materials, labour charges, cost of fittings, conveyance,including all cost of trenching,backfilling and laying as per lines and levels if any etc as per the directions of departmental officers at site

od23618/2020_2021/IA : Supplying and fixing 50mm HDPE clip with all charges complete

od23619/2020_2021/IA : Supplying and fixing 40mm GI Tee with all charges complete

od23620/2020_2021/IA : Supplying and fixing nipple 40mm with all cost of materials, labour charges, cost of fittings, conveyance,including all cost of trenching,backfilling and laying as per lines and levels if any etc as per the directions of departmental officers at site

od23622/2020_2021/IA : Supplying and fixing 40mm IT plug CI with all charges complete

od23623/2020_2021/IA : Supplying and fixing 50mm IT plug CI with all charges complete

SHAJI MATHEW

Bidder Name

Noby George

SHAJI MATHEW