Const. of New Bldg.of CHC Chachchrauli Distt. Yamuna Nagar (Pdg. EI Estate).

Amount

Main Switches Supply and erection of metal clad switches / B.D.Bs with rag bolts on wall or on existing angle iron board / pedestal including bonding to earth and necessary connections . Double pole switch 32 amp 240 Volts. HSR No. 31.12 (a) (ii) Cat-B

(L) Miniature Circuit Breaker and Isolator. Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. Miniature circuit breakers of 9 KA breaking capacity. SP MCB of 9 KA breaking capacity 6 amp. to 32 amp. HSR No. 31.17a) (ii)

Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. Galvanised iron pipe 65 mm dia on flushed. HSR No. 31.21 (xiv)

Supply and erection of PVC pipe of 6 kg. pressure laid 1 metre below ground level complete including digging refilling of the trench with jointing etc. PVC pipe 65 mm dia. HSR No. 31.21(xxx) (c )

(Q) Earthing Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required . HSR No. 31.22(i)

Extra for using salt and charcoal / coke for pipe earth electrode as required. HSR No. 31.22(ii)

Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required . HSR No. 31.22(xii)

Pdg. and fixing 4.00 mm dia G.I.wire on surface or in recess for loop earthing as required . HSR No. 31.22(xvi)

Under Ground Cables. Supply and erection of under ground cable 1 metre below ground level covered with sand and bricks including necessary connections, digging and refiling of trenches. 16 Sq. mm 2 Core Cable . HSR No. 31.25 (v) Ard.

25 Sq. mm 4 Core Cable . HSR No. 31.25 (xIi) Ard.

Supply and erection of suitable compression type brass cable glands for underground Cable. 10 Sqmm to 16 Sqmm Cable 2 to 4 Core . HSR No. 31.28 (ii)

25 Sqmm to 50 Sqmm Cable 2 to 4 Core. HSR No. 31.28 (iii)

S/E of weather proof M.S.Box of size 20 cm x 15 cm x 10 cm. covered with 3.00 mm thick M.S.sheet hinged cover, locking arrangemrnt , housed in wall , including the cost of 1 no. 16 amp. 415 volts kit-kat and 2 nos. 63 amp. 415 volts neutral links fixed on hard wood board in the M.S.Box including painting and necessary connections . HSR No. 31.30 (IV)

Supply and erection of 32 mm dia meter 1.5 metre long bracket ( B-Class ) making an angle of 10 to 15 degree with horizontal plane for mounting street light fitting fixing of GI bracket on wall with 2 Nos. , 32 mm x 3 mm thick MS clamps including the cost of cutting , welding of GI pipe complete with cement sand mixture , bolts and nuts etc. including necessary connections . HSR No. 31.30 (III) ( xv )

(v) Pedestal . Supply and erection of Godrej Almirah typeM.S.pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S.sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . M.S.pedestal of size 600 mm wide , 750 mm high ,300 mm deep and bottom totally open , duly embeded in cement concrete block of size 750 mm x 450 mm x 200 mm above ground level duly plastered with 12 mm thick 1:4 cement plaster , having a base of size 900 mm x 600 mm x 250 mm below ground level. HSR No. 31.33 (i)

Supply & erection of PVC unsheathed copper conductor cbale single core 1100 volts grdae in pipe of suitable size excluding cost and erection of pipe. Size 1.5 Sqmm (3/0.81 mm ) HSR No. 31.40 (i)

Supply & erection of double door sheet steel enclosure distribution board suitable for MCBs and ELCBs etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. 4-way, TP & N (Vertical) (8+12) HSR No. 31.41 (vi)

Supply and erection of PVC pipe ISI marked ( Medium ) recessed in wall / ceiling etc. including the cost of PVC bends , inspection boxes , iron hooks and cement concrete etc. complete in all respect upto the entire satisfaction of Engineer-in-charge of work. 25 mm dia. HSR No. 31.44 (ii)

Supply & Erection of Hot Dip Galvanized octagonal pole of 3 mm thickness, with base plate including cost of nut and bolts and all accessories as supplied by the manufacturer including cost of foundation accessories etc. The foundation bolts as per manufacturer design should be hot dipped galvanized pole complete with door locking arrangement. Terminal plate consisting of 2 Nos. 100A. 4 pole natural links including connection etc. with suitable connecting arrangment for 2 no. MCBs / kit kat including cost of R.C.C. 1:1.5:3 for foundation of size 0.7 M. x 0.7 M. x 1.8 M with minimum 8 Nos. 12mm dia longitudinal MS reinforcement rods with rings of 8 mm dia not more than 200mm C.C. for fixing the pole with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineerin-charge of the of the work. 8 Mtr. Long pole with top dia 70mm and botom dia 135mm with base plate of size 225 x 225 x 16mm. HSR No. 31.68 (ii)

Supply, installation, testing and Commissioning of 12.5 Mtr. Long High Mast manufactured from B.S.E.N. 10025 or equivalent grade material in, 2 (two) section hot dip, galvanized inside and outside in single dip, suitable for wind velocity as per IS 875 part-3 suitable for 6 Nos Lumnaire loading fully motorized (power tool) with starter & cable complete along with standard accessories supplied by the manufactured with 3 nos. steel wire rope double drum system and twin dome aviation light with LED without foundation but including cost of set of foundation nut and bollts , installation at site complete in all respect upto entire satisfaction of engineer-in-charge. Thickness of Top Section =3mm (minimum) Bottom Section =3mm (minimum) Bottom Section = 3mm (minimum) Thickness of Galvanization Top =65micronb (min) Bottom =85microm(min.) HSR No. 31.83 i

Supply of LED Flood Light 200W atleast 110 lumns per watt Make Bajaj/ Phillips/ Crompton/Havells/Surya/HPL as per approved make with all labour and material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. NS-1

S/E of 0.3 KVA capacity inverter with SMF battery for aviation light in existing panel i/c the cost of labour charges and connections and petty material etc. for complete in all respect upto the entire satisfaction of the engingeer-in-charge of work. Make of Inverter:- Lumineous / Microtek/ Sukam. make of Battery:- Exide/ Amron. NS-2

Foundation of 12 Mtr High Mast as per the Drawing of High Mast (L.S) NS-3

S/E of 120 watts LED atleast 110 lumns per watt street light with lense IP 66, HP dia cast aluminium hoising including erection of same BAJAJ BRTFG-120 W/ CROMPTON LSTN120-CDL/ Havells make ENDURACITYLINERNEOSL 120WLED757SASYBOTG as per approved make with all labour and material required to complete the job in all respect up to the entire satisfaction of Engineer- in-charge of the work. NS-4

S/E of 40 mm diameter 1.5 mtr Long GI bracket (B - Class) on each side with G.I coller 0.50 Mtr. long of suitable size to fit on octagonal pole with the top dis 70mm i/c necessary bolts & nuts etc required for fixing the bracket on top of the octagonal pole painted with Aluminium paint and including necessary connection with all labour and material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. NS-5

Bakshi Brothers

M/s JSB Enterprises