Const. of Administrative Block Phase-III in the campus of Mini Sectt. at Ambala District. (Pdg. LAN and EPABX System).

Amount

SITC of 24 Port Layer 2 Access switch, Make: Cisco, Allied, Juniper The Switch should support non-blocking Layer 2 switching and Layer 3 routing Hardware and Interface Requirement Minimum 24 x 10/100/1000 Base-T PoE+ and 2 x 1/10G ports. (with required transceiver modules) 1 U Rack mountable and should support stacking of minimum 4 switches with maximum 40 Gbps of dedicated stacking/ equivalent bandwidth. The Switch should have 2GB DRAM and 2GB internal Flash 128 Gbps or higher Backplane capacity and minimum 95 Mpps of forwarding rate Should support Non-blocking hardware architecture All interfaces should provide wire speed forwarding for both Fiber and copper modules Support for at least 4000 VLANs & 16k MAC address Layer2 & Layer 3 Features It should support IGMP snooping v1,v2 & v3 It should have static IP routing from Day 1 and should be upgradable to support OSPF/OSPFv3 and PIM Switch should support 8 hardware queues per port Dynamic Host Configuration Protocol (DHCP) snooping Switch should support LLDP capabilities Should support IP Source Guard , DAI and IPv6 Security feature like IPv6 RA Guard and IPv6 Neighbor Discovery Inspection Should support Secure Shell (SSH) Protocol and Simple Network Management Protocol Version 3 (SNMPv3). Switch needs to have console port for administration & management Management using CLI, GUI using Web interface should be supported FTP/TFTP for upgrading the operating System Should support Energy Efficient Ethernet IEEE 802.1x support IEEE 802.1D Spanning-Tree Protocol IEEE 802.1p class-of-service (CoS) prioritization IEEE 802.1Q VLAN IEEE 802.3 10BASE-T specification IEEE 802.3u 100BASE-TX specification Manageability Switch should able to support management via CLI, Web interface SNMP v1,v2,v3 Switch should be manageable through both IPv4 & IPv6. Safety & Complainces Switch Should be Common Criteria/NDPP/NDcPP certified Switch should be IPv6 Logo Certified Switch should be UL-UL60950-1, FCC Part 15, VCCI Class A, EN 55022, EN 55024, EN 300386, CAN/CSA 22.2 No. 60950-1, Reduction of Hazardous Substances (ROHS) certified OEM should be leader in GARTNER Data Centre Quadrant latest Report

SITC of Core Switch 32 x 1G SFP and 4 x 10G ports scalable to 8 SFP+ Ports Make:Cisco, Allied, Juniper 1 U Rack mountable and should provide stacking of minimum 10 switches with 120Gbps of dedicated stacking/ equivalent bandwidth (All the stacking accessories should be included from day 1). The Switch should have 2GB DRAM and 4GB internal Flash 224 Gbps or higher Backplane capacity and minimum 165 Mpps of forwarding rate Should support Non-blocking hardware architecture All interfaces should provide wire speed forwarding. Support for at least 4000 VLANs, 60k MAC, 12k IPv4 and 8k Multicast routes It should support IGMP snooping v1,v2 & v3 It should have static IP routing, OSPF and PIM from Day 1 and switch should be upgradable to support BGP and IS-IS Switch should support 8 hardware queues per port Dynamic Host Configuration Protocol (DHCP) snooping Switch should support LLDP capabilities Should support IP Source Guard , DAI and IPv6 Security feature like IPv6 RA Guard and IPv6 Neighbor Discovery Inspection Should support Secure Shell (SSH) Protocol and Simple Network Management Protocol Version 3 (SNMPv3). Switch needs to have console port for administration & management Management using CLI, GUI using Web interface should be supported FTP/TFTP for upgrading the operating System IEEE 802.1x support, IEEE 802.1D Spanning-Tree Protocol, IEEE 802.1p class-of-service (CoS) prioritization, IEEE 802.1Q VLAN, IEEE 802.3 Switch should have internal redundant power supply and Hotswappable fans from day 1 Switch should able to support management via CLI, Web interface SNMP v1,v2,v3 Switch should be manageable through both IPv4 & IPv6. Switch should be UL-UL60950-1,FCC Part 15, VCCI Class A, EN 55022, EN 55024, EN 300386, CAN/CSA 22.2 No.60950-1, Reduction of Hazardous Substances (ROHS) certified Switch should be IPv6 Certified Switch Should be Common Criteria NDPP/NDcPP certified OEM should be leader in GARTNER Data Centre Quadrant latest Report

Supply Installation, testing and commissioning of 24-port loaded 1 U Height Cat6 Modular Jack Panel with integrated rear cable management tray(For Data UTP Field Cables). jac As per specification. Make & Model: R&M/AMP/Molex.

Supply Installation Testing & Commissioning of Cat6 UTP Information Outlet -Blue (Data). Should be PCB free and Tool less will be added advantage with halozn free. User Side. As per specification. Make & Model: R&M/AMP/Molex.

Supply Installation Testing & Commissioning of 2-port with dust cover faceplate including back box and all other accessories As per specification. Make & Model: R&M/AMP/Molex.

Supply Installation Testing & Commissioning of Cat6 Patch Cords - 1Mtr -Blue ( Data Rack Side), As per specification. Make & Model: R&M/AMP/Molex.

Supply Installation Testing & Commissioning of Cat6 Patch Cords - 2Mtr -Blue ( Data Field Side), As per specification. Patch cord should have provion of lock with information outlet port.Make & Model: R&M/AMP/Molex.

Supply Installation, testing and commissioning of Indoor soft jelly filled SINGLE MODE 6 CORE - OS2 . Should be ISO.IEC 11801 type OS2 and ITU-T REC G 652D. Tube Idenification :Single tube. Fibre protection (Tube) : Polybutylene Terephthalate (PBT). Water Blocking :Thixotropic Gel (Tube) and Petroleum Jelly (Interstices) with cotton poly thread protective. Core Wrapping : Polyethylene Terephthalate with cotton paper guard protection : Corrugated Steel Tape Armour (ECCS Tape). Strength Member: soft protetective periphery /Central S. Sheath : UV Stabilized Polyethylene (HDPE). Maximum. Tensile Strength-Short Term : 400N or better. Mass (Nominal) : minimum 50 kg/km Optical fiber cable with jelly filled 6F Loose Tube ( Unitube ) Type CSTA SM FOR SERVER ROOM to Each Network Rack Backbone connectivity As per specification. Make & Model: R&M/AMP/Molex.

Supply Installation Testing & Commissioning of 12F, 1U, LC OM3, LIU Loaded with Pigtails, Splice tray, LIU have slider channel for rack mount. It has spindle with fiber management accessories. As per specification. Make & Model: R&M/AMP/Molex.

Supply Installation, testing and commissioning of PATCH CORD LC-LC MM OS2 DUPLEX LENGTH- 2mtr. It has covered with metal outer sheath for antirodent protection.As per specification. Make & Model: R&M/AMP/Molex.

Supply Installation & Commissioning of 9U Rack for Network Switch with all necessary accessories, civil, electrical works & peripheral items. Make & Model: Valrack/Netrack/Comrack.

Supply, installation, testing and commissioning of 1 KVA online UPS with 2 hours backup Make- Microteck, APC, Luminous

Supply and erection of 1000-Base SM SFP fiber module of same OEM quoted for switch

Supply Installation Testing & Commissioning of 3 Core Power Cable 1.5 sqmm. Make: Finolex/Polycab/Havells

Splicing and testing of fiber core with digital report of OFC performance.

SITC IP-Phone with 2 SIP lines support POE and required external POE adaptor for the same. Phone has caller ID screen with call forwarding feature. Make Matrix/Cisco/Unify/Avaya.

SITC IP-Phone with 1 SIP lines support POE and required external POE adaptor for the same. Phone has caller ID screen with call forwarding feature. Make Matrix/Cisco/Unify/Avaya.

Supply and erection of PVC conduit pipe ISI marked (Medium) recessed in wall /ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect to the entire satisfaction of Engineer-in-Charge of work. 31.44 (HSR Item) 25 mm dia 31.44(b)

S/E/T/C of Cat-6 cable in existing PVC conduit /PVC channel complete in all respect with all labour and material required to complete the job in all respect. 31.8

Insat Techno Services

NB TECHNOLOGIES INDIA