Design, Supply, Erection, Testing & Commissioning of feeder line, AEC and BEC in connection with upgradation of 1x25KV traction system to 2X25 kV traction system between Bhadrak Khurda Road section of Khurda Road division of East Coast Railway to meet 3000MT loading target. (174RKM/394TKM)

104-Schedule 1 Section 4 Non Ferrous 271127025.00 Below/P

Item Breakup - 101-Schedule 1 section 1 General

Kilometre 1(c)Preparation of Traction Working Rule Diagram along with Working Instructions (App-G)

Each Erection station/Gate 1(d)Supply & Installation of Traction Working Rule Diagram Boards

Square Foot 8(b)(iii) Supply without Insulator and erection of material for termination of all aluminium 25KV Feeder / return conductor (Single SPIDER)

Each 11(a)(i) Supply without insulator and erection of a cut-in (9 Tonne) insulators

Each ECOR-CONST-HQ-ELECTRICAL/ECOR 11(a)(ii) Supply without Insulator and erection of a suspension (9 Tonne) Insulator

Each 11(b) Supply without Insulator and erection of 25 kV Post Insulator

Each 17 (b) Extra for special embedment of earth electrode.

Each 21. Supply and erection of HDPE polymer net on TTC/portal/SPS structures as per the standards laid down in RDSO drawing no TI/MI/0050 Rev-1

Sqm 23(a) Transfer of equipment from one mast or support to another

Each 23(d) Dismantling of Feeder/ Return Conductor

Kilometre 23(h)Dismantling of an Isolator.

Each 23(i)Dismantling of a Post/ Pedestal Insulator

Each 23(j) Dismantelling of PTFE Neutral section.

Set 23(m)Dismantling of cantilever assembly along with insulator

Set 23(p) Dismantling of jumpers (All types).

Each 23(u) Dismantling Work AL Busbar all size & Cu Busbar all size incl. all fittings

Metre 23(v) Dismantling of Booms & other components of Portals/TTC structures (excluding uprights) & drop arms, SPS etc

MT ECOR-CONST-HQ-ELECTRICAL/ECOR

MT 23(w) Dismantling of mast & temporary mast by cutting from 200 mm below the bottom of muffing level

Each 23(x) Dismantling of upright of all type of Portals/ TTC by cutting from 200 mm below the bottom of muffing level

Each 24(a) Uprooting of mast/Portal upright

Numbers 24(b) Cutting and removal of old foundation of masts and portals including back filling of pit

cum 24(c) Drilling of Hole in Mast/Rail as required i.e. for connection of BEC/AEC etc.

Each 24(e) Digging of trench up to 300 mm depth, Laying of BEC and Back filling

Kilometre 24(h) Drilling of Vertical Holes & Grouting of Galvanized Holding Down Bolt of Size 28 mm dia, 950 mm length with 100 mm threaded portion and 850 mm ragged type confirming to IS 2062-92 (Gr-A) including Washers & Nuts.

Each 29 Transportation of materials

MT 8(b)(i)Supply without insulator and erection of material for termination of Single conductor of Over head equipment or terminating wire.

Each Total 74341732.17

Item Breakup - 102-Schedule 1 Section 2 concrete

cum 2(a) (ii) Concrete for foundation and plinth in Rocky Soil (For M-10 and M- 15 grade concrete)

cum 2(a)(iii)Concrete for foundation and plinth in Hard Soil (For M-15 and M-20 grade concrete) ECOR-CONST-HQ-ELECTRICAL/ECOR

cum 2(a)(iv)Concrete for foundation and plinth in Rocky Soil (For M-15 and M- 20 grade concrete)

cum 2 (b)(i) In other than hard soil and rock (For M-10 and M-15 grade concrete)

cum 2(b)(ii) In other than hard soil and rock (For M-15 and M-20 grade concrete)

cum 2(c) (i) Reinforced concrete M-15 grade for foundation

cum 2(e) Concrete for Cylindrical type side bearing foundations (M-15 and M-20) (SBC - 11000 kgf/sqm)

Item Breakup - 103-Schedule 1 Section 3 Ferrous

MT 3(b)(i) Supply and erection of fabricated and galvanised structures (O, N & R type portals) with all necessary components other than masts

MT 3(b)(ii)Supply and erection of Structure steel (traction masts) fabricated and galvanised of all Type : B - series mast.

MT ECOR-CONST-HQ-ELECTRICAL/ECOR 3(b)(iii) Supply & Erection of special fabricated and galvanised steel structures other than Portals & traction- Masts not covered under items 3(b)(i) & 3(b)(ii).

MT 3(c) Supply only of fabricated steel other than masts

MT 3(d)(i) Supply and erection of a Guy Rod Assembly (3232/3242 etc as required, 5001/5001-1/5001-3, 5002, 5004/ 5005 /5005-2/5006-1/ 9070/9071/5006-2, 5007-1, 5008, 5220 with fastners)

Each 3(f) Supply and erection of 25KV Caution Boards/Plates.

Each 8(b)(v) Termination of AEC incl. all fittings &accessories i.e. Strain Clamp, adjuster etc.

Each 16(a)(i) Supply and erection of a structure bond

Each 16(a)(ii)Supply and erection of a Galvanised steel stranded wire structure bond.

Each 16(a)(iii)Supply and erection of a Cross Bond (Flat 50x6 GS/MS).

Each 16(b) Supply and erection of a longitudinal bond.

Each 16 (c) Supply and erection of a transverse and special bond

Each 17(a) Supply & erection of a single earth electrode.

Each ECOR-CONST-HQ-ELECTRICAL/ECOR 22(b)Supply and erection of anti monkey menace

Each 3(e) Supply of steel reinforcement for RCC

MT 4(a)(i)Supply without insulator and erection of single bracket assembly

Each 3(i) Supply and Erection of Retro- Reflective Type DJ ON (CLOSE)/ DJ OFF (OPEN)/ 500m/ 250m/ Train-18/ MEMU Neutral Section Boards

Each 3(m) Supply and Erection of Retro- Reflective type Power Block Working Limit Board.

Each 3(p) Supply and Erection of Set of Isolator Operation OPEN / CLOSE Boards

Set 3(q) Supply and Erection of Number Plate (Retro-Reflective Type).

Each 3(r) Supply and Erection of GI Pipe 50 mm B class at culvert, girder in rocky area, bridge etc. for laying BEC wire.

Metre Total 509464881.00

Item Breakup - 104-Schedule 1 Section 4 Non Ferrous

Kilometre 7(d) Supply & Erection of aerial earth conductor (AEC) with necessary accessories, fittings and fasteners on OHE mast/Portals

Kilometre 12(d)Supply & erection of PTFE Neutral section for 2x25 kV AC Traction system

Set ECOR-CONST-HQ-ELECTRICAL/ECOR

Set 13(a)Supply without Insulator and erection of 25 KV SP Isolators without earth contact assembly.

Each 13 (c) Supply without Insulators & erection of 25kV Double Pole Isolator for 2x25KV syatem

Each 13 (d) Extra for supply and erection of an earth contact assembly in an isolator

Each 15a(ii) Supply & erection of small copper jumper incl required No of PG Clamp 1041-2, Approx length of jumper 1.6m

Each 15(d) Supply of materials and erection of Large copper jumper 160 Sq. mm

Each 18(b) Supply & erection of Solid copper bus-bars 18mm.:

Metre 18(c)(i)Supply & erection of solid copper bus-bar connectors: Bus terminal (6310-1)

Each 18(c)(ii)Supply & erection of solid copper bus-bar connectors: Bus splice (6320)

Each 6(b) Supply & Erection of Current Carrying Flexible Dropper (CCFD) Wire dia 7.5 mm, 25 sq mm along with CCFD Assembly.

Set 15 (a) (iv) Supply & erection of a copper jumper (5mm dia dropper wire).

Each ECOR-CONST-HQ-ELECTRICAL/ECOR

Each 7(e) Supply and Erection of Buried Earth Conductor (BEC) with necessary accessories fittings and fasteners.

Kilometre 5. Supply and erection of span wire. (130Sqmm LS Wire

Metre 37(d) Supply & Erection of Aluminium Jumper

Item Breakup - 105-Schedule 1 Section 5 Insulator

Each 11(bx) Supply of 25 kV Post Insulator for Item 105

Each 13 (ax) Supply of Post & Operating rod insulators for single pole isolators

Set 13(cx) Supply of Post & Operating rod insulators for double pole isolators

Set 4(ax) (i)Supply of Stay arm Insulator Porcelain (CD1050)

Each 4(ax)(iv) Supply of Bracket Insulator Porcelain (CD1050)

Item Breakup - 106-Schedule 1 Section 6A (Non Sor)

Kilometre Supply of 240Sqmm XLPE Copper cable of 26KV/45KV(52KV) suitable for 25 KV traction system as per IEC 60840

Metre ECOR-CONST-HQ-ELECTRICAL/ECOR Laying of one number XLPE powe cable of grade26KV/45KV(52KV) , 240 s q m m direct in ground including excavation, sand cushioning, protective covering (By Bricks) and refilling the trench.etc. as required

Metre Supply, Erection, Testing and Commissioning of 26KV/45KV(52KV) out Door cable Termination Kit (Heat Shrinkable)

Numbers Laying of HT cable (XLPE) of size 1core x 240 sq.mm. in trench through GI pipe/RCC pipe / along or across the structures. With suitable arrangement along with clamps, fastner etc

Metre Cable route indicator (G.I type) Supplying and making cable route marker with 10cm X 10cm 5mm thick G.I plate with inscription there on bolted, welded to 35 mm X 6mm angle iron 60cm long and fixing the same in ground as required

Numbers Total 36122756.10

Item Breakup - 107-Schedule 1 Section 6 B Non-Sor