REPAIR TO FENCING COMPOUND WALL DRAINS BERMS AND FOOT PATH OF CR CAMP AND MT SECTION UNDER AGE BR I AT IMA DEHRADUN

Amount

Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in CM (1:6) including demolition of old brick work built in cement mortar complete all as specified and directed.

Brick work with sub class ‘B’ bricks (old size), straight or curved on plan to any radius in half brick thick walls built in CM 1:4 including demolition of old brick work built in cement mortar complete all as specified and directed.

Taking down cement plaster on brick or stone walling built in CM including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Rendering 15mm thick plaster on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement and mixed with water proofing compound as per manufactures instructions, complete all as specified and directed

Rendering 15mm thick plaster on other than fair faces of brick work or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Rendering10mm thick plaster in CM (1:3) on concrete surface of ceiling finished even & smooth without using extra cement complete all as specifiied and directed.

75 mm thick PCC 1;3:6 type C-2 using 40mm graded stone aggregate as in plinth protection or similar places and finishing the surface even & smooth with out using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meter and every change of direction and filling the same with mixture of bitumen & sand in ratio (1:1) by weight including necessary form work etc and including demolition of existing old cement concrete, complete all as specified and directed.

100 mm thick PCC 1:2:4 type b1 (20mm graded crushed stone aggregate) as in floor/hard standings and making impressions with spike rolling or expanded metal whilst the concrete is green, finishing exposed edges fair or rounding or chamfering of exposed edges also filling in uneven surfaces to make it level including making joints 12mm wide to the full depth of PCC at panel size n, exc 2.0mx 2.0m and filling the same with sealing compound grade 'A' including necessary formwork including demolition of existing old cement concrete floor etc complete all as specified and directed.

40mm thick PCC type B1 1:2:4 (20mm graded crushed stone aggregate) as in floors and finishing the concrete even and smooth using extra cement including demolition of existing old cement concrete floors etc complete all as directed.

Glass dividing strips 3mm thick and 38mm wide inserted in position and confirm to design complete all as directed.

PCC 1;4;8 type D-2, using 40 mm graded stone agg as in foundation, filling, mass concrete and sub base of floor including demolition of existing old concrete complete all as specified and directed

Rubberised polished precast coloured concrete Interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade complete with & including 25mm thick sand cushioning layer including dismantling of existing damaged flooring etc complete, all as specified and directed.

Rubberised polished precast coloured concrete Interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete with & including 25mm thick sand cushioning layer including dismantling of existing damaged flooring etc complete, all as specified and directed.

25mm thick heavy duty Chequered cement concrete tile of any pattern decided by Engr-in-charge as in floors/pavings laid over 20 mm thick screed bed 1:6 laid and jointed with white cement slurry mixed with pigment to match the shade of tile complete including dismantling of existing tiles with screed bed of any description and in any position complete all as specified and directed.

Machine cut kota stone slab flooring 18-20mm thick laid over 20mm thick cement sand screed CM 1:6 as base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and rubbing and polishing including dismantling of existing tiling and cement mortar bedding and removing rubbish off the premises complete all as directed.

Machine cut kota stone slab flooring 18-20mm thick laid over 10mm thick rendering in CM 1:4 as base on vertical surface laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and rubbing and polishing including dismantling of existing tiling and cement mortar bedding and removing rubbish off the premises complete all as directed.

Cutting and grinding of existing terrazzo/Kota stone floor surfaces (2 cut) on horizontal & vertical surface and finally finishing the surfaces uniformally by applying floor polish complete all as directed.

25mm thick PCC 1:2:4 type B-1 (using 20mm graded agg) used as sub floor finish the surface to receive to tiles including demolition of existing old cement concrete floors etc complete all as directed.

Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.6 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, as in vertical surface such as skirting dado and riser to step floor etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 10 mm thick backing in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in vertical surface such as skirting dado and riser to step floor etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 10 mm thick backing in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

Glazed ceramic coloured tiles of size 300 mm x 200 mm x 7mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 10 mm thick rendering in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing wall tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

Cutting chases, pining in, making good to facings where reqd and pointing in cement motor (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintels, etc, and cutting chases for concealed water tubing or concilled conduit wiring, etc and making good exceed 20 cm girth in brick walls complete all specified and directed

15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed.

20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed.

Udaipur green marble work 18 to 20 mm thick (table rubbed and polished) as in flooring, steps, cooking platform and like with and including 20 mm thick cement screed bed in CM 1:6 and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of slab including rounding of edges of udaipur green stone and demolition of existing stone slab or tiles with screed bed of any description and in any position complete all as specified and directed.

Mild steel TMT bars 8mm dia and over cut to length bent to length bent to shape required including cranking bending spirally for hooping for columns hocking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Precast RCC 1:2:4 Type B-1 (using 20 mm graded crushed stone aggregate) as in cover slab, set and jointed in CM 1:4 incl demolition of existing old RCC slabs of any description complete all as specified and directed. (Note: Reinforcement shall be measured and paid separately under respective items of this BOQ)

PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in surface channel and drain including necessary use and waste of form work and demolition of existing old cement concrete of any description complete all as specified and directed.

Extra for forming fair finished drain or channel not exceeding 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.

PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in coping, benching, holdfast etc including weathering sliglitely rounded or chamfered including necessary use and waste of form work including demolition of existing old cement concrete (unreinforced) of any description and in any position for complete all as specified and directed.

Ball valve 15mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 210 gms fixed in repair complete all as specified and directed.

Ball valve 20mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 210 gms fixed in repair complete all as specified and directed.

20mm bore gun metal globe/gate valves, with iron wheel head, screwed both ends for iron/GI pipe fixed in repair complete all as directed.

Vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including replacement of 'P' or 'S' CI, concrete bedding and making good existing floor fixed in repair complete all as specified and directed.

Vitreous china wash down water closet pan (pedestal pattern) white including seat cover of plastic, complete including CP jet with necessary PVC pipe fittings fixed in repair complete all as specified and directed.

Vitreous china wash basin, white, flat back, size 550x400mm including bracket fixed in repair complete all as directed.

PVC low level flushing cistern 10 Ltr capacity symphonic action type white including ball valve, float valve and handle including bracket and PVC flush pipe fixed in repair complete all as specified and directed.

Sink made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter on to dwarf wall or inclulding fixing cantilver brackets and connecting union to pipe overall size 405mm x 460mm x 203 mm bowl size 405 mm x354mm x 203mm fixed in repair complete all as specified and directed. Make :- Prayag Cat part No.1216DM or equivalent in Blue star/Nirali.

Stainless steel plate rack of size 31 inch X 36 inch X 10 inch fixed in repair complete all as directed. Make :- Make:- Prayag Cat part No.P-348 or equivalent in Blue star/Nirali.

Brass chromium plated towel rail 600mm long fixed in repair complete all as directed. Make : ESSCO (Jaquar) Cat No. AEC-1111 or equivalent of make Cera/Hindware

Grating dome 125 mm of PTMT (Min weight 40 gm) fixed in repair Complete all as specified and directed.

15mm bore short body bib tap chromium plated with wall flange and aerator fixed in repair complete all as specified and directed. Make- Jaguar ESSCO cat part No SQT-511KN or equivalent of Cera/Hindware

15mm dia Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed in repair. (Minimum weight 15mm-90gms/20mm125gms). complete all as specified and directed.

15mm bore stop valves Male/Female end chromium plated fixed in repair complete all as specified and directed. Make- Jaguar ESSCO cat part No SQT-513BKN/513/ AKN or equivalent of Cera/Hindware

75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with MS clamp including taking down existing pipes complete all as directed.

110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with MS clamp including taking down existing pipes complete all as directed.

S&F PVC (SWR) bends in any radius 110mm bore in repairs complete all specified and directed

S&F PVC (SWR) bends in any radius 75mm bore in repairs complete all as specifed and directed

S&F PVC (SWR) junction single T equal or unequal in any radius 110mm bore in repairs complete all specified and directed

S&F PVC (SWR) junction single T equal or unequal in any radius 75mm bore in repairs complete all specified and directed

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement 150mm bore in repairs.

S & F 75 mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1

S & F 100 mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1

32 mm dia Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed in repair complete all as specified and directed.

40 mm dia Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed in repair complete all as specified and directed.

500 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed.

1000 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed.

Drapery rod in any length, high strength MS pipe with corrugated PVC extrusion having outer dia 28mm a pair of brackets, fixed in repair complete all as specified and directed.

Decorative finals ABS plastic in matching colour of steel powder quoted paint of same colour of rod, fixed in repairs complete all as directed.

Preparing surfaces holding the members in true position and welding in reparis n. exc 2.5 cm in length, thickness of metal to be welded exc 6 mm but n. exc 9 mm complete all as directed.

Hacking out old broken glass pane of any thickness and size from wooden/metal frame including punching or drilling and glazing pins etc complete all as directed.

3mm thick sheet glass ordinary quality type & glazing with wooden beads in squares not exc 0.5 Sqm in each pan, complete all as directed.

2nd class hard wood scantling clean swan 40 sqcm and over in section fixed with nails in framed work in any position including dismantling existing timber scantling complete all as specified and directed.

6mm thick cement corrugated or semi corrugated sheet in roofs fixed in repair wdith L or J type bolt including dismantlingt existing sheets complete all as specified and directed.

0.80mm thick plain galvanized mild steel sheeting with grade of Zinc coating 120 fixed with "L"or "J" type hooks and washer as in ridges, hips, valley gutter etc including dismantling old sheets in ridges, hips valley gutter any pattern etc complete all as specified and directed

Pre- painted colour galvalume aluminium Zinc coating GI based corrugated steel sheet 0.50 mm thick of green colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as directed including dismantling existing sheet.

Pre- painted colour galvalume aluminium Zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges fixed with self tapping screws etc complete all as directed including dismantling existing sheet.

Removing /cutting trees vegetation, digging out roots filling holes on building wall/roof/cajja etc and making good with cement mortar 1:3 or cement concrete 1:2:4 type B-1 including removal of material to a distance exc 250m not exc 500m complete all as specified and directed.

Repairing to existing door/ window chajjas upto 3.0m span and width 1.0m by demolition/ scrapping of damaged portion and preparing the surfaces by providing 50mm thick cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate including finishing the surface by rendering 10 mm thick plaster in CM 1:3 and finished even and smooth surface using extra cement over concrete surface and PCC benching including weathering sliglitely rounded or chamfered angles and throating over and including priming newly plastered/concrete surface by applying one coat of primer, 2 mm thick acrylic damp proof wall care putty and applying two coat of Apex paint (Weather coat exterior paint) and complete making good existing disturbed surface all as specified and directed (work to be carried out upto a height of 7.5 m and rate shall be inclusive of all necessary scaffolding and shuttering). Note: Reinforcement if required shall be measured and paid separately under respective items of this BOQ)

Taking down existing broken portion of upward / inverted facia or roof slab or visible concrete reinforcement of any thickness and shape and surface area exc 0.50 Sqm but n exc 5.0 Sqm and repaired by providing cement concrete 1:2:4 type B1 (using 12.5 mm graded stone aggregate) mixed with quick setting adhesive inclusive of all necessary reinforcement / mesh and other material including finishing the surface by rendering 10 mm thick plaster in CM 1:3 and finished even and smooth surface using extra cement over concrete surface and PCC benching including weathering slightely rounded or chamfered angles and throating over and including priming newly surface with application of one coat of primer, 2 mm thick acrylic damp proof wall care putty and applying two coat of Apex paint (Weather coat exterior paint) and complete making good existing disturbed surface all as specified (work to be carried out upto a height of 7.5 m height and rate shall be inclusive of all necessary scaffolding and shuttering) . Note: Reinforcement if required shall be measured and paid separately under respective items of this BOQ)

4mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605mm fixed with 1.6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework by means of 4mm dia adjustable "J" hook consisting of two Nos washers and two nuts at 1.2 mtr centres, size of main tee 38mm X 25mmX 1.4mm, cross tee 38 mm X 25 mm X 1.4mm, angle along walls 38 mm X 25mm X 2.0 mm and including taking down existing boards any thickness including cover fillets etc complete all as directed

4mm thick E-board false ceiling (Classic) tile size 600mm X 600mm as in ceiling fixed on existing grid including straightening the grid and taking dowan carefully old board complete all as specified & directed.

4 mm thick cement plain building boards fixed in ceiling to timber framework with screws including all accessaries with and including two coats of white wash including dismantling existing boards and including cover fillet complete all etc complete all as specified and directed.

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples in repairs complete all as specified and directed

Preparation of old plastered surfaces of wall by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.

Complete removing of existing treatment from wall / ceilling by using machinary complete all as specified and directed. (work to be carried upto a height of 7.50m)

Prepration of scrapped surface of wall / ceilling and applying 2mm thick Asian acrylic damp proof wall care putty in two coats as per manufactur instruction complete all as specified and directed. (work to be carried upto a height of 7.5m).

Prepration of primed surfaces of wall / ceiling and applying one coats of Appex paint ( Weather coat exterior paint) complete all as specified and directed. (work to be carried upto a height of 7.5m) .

Prepration of surfaces of wall / ceiling and applying two coats of oil bound emulsion distemper over a coat of primer complete all as specified and directed.

Preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper on walls complete all as specified and directed.

Preparation of old plastered surfaces of ceiling by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.

Preparation of new plastered surfaces of wall and applying two coats of snowcem (cement base paint) complete all as directed.

Preparation of old plastered surfaces by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of Cement based paint complete all as specified and directed.

Preparation of old painted wooden surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed.

Preparation of old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed.

Supply and fixing MS galvanised chain link fencing, of size 3mm dia and mesh size 60x60mm to any type of standards, rails, straining bolts etc including provision of binding wire and dismantling/Taking down unserviceable fencing complete all as specified and directed.

PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation filling, mass concrete and sub base of floor etc complete including demolition of existing old concrete all as specified and directed.

Mild Steel work as in posts and struts in fencing including cutting tops to shape as directed drilling holes notching for wires etc flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting and riveting etc including dismantling existing RCC/wooden posts and struts complete all as specified and directed.

Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

Chromium plated brass knob for wash hand basion, wall mixture, bib cock and angle cock with nut & washer fixed in repair complete all as specified and directed

Brass spindle for existing bib cock, wall mixture , WHB mixture fixed in repair complete all as specified and directed

18/19mm thick colour PVC prelaminated board fixed to timber frame work as in cup board shutter / shelves, pelmet box and similar items fixed in repair complete all as directed.

Auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters fixed in repair complete all as specified and directed.

Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs fixed in repair complete all as specified and directed.

Stainless steel handles 100 mm size for kitchen cabinet shutters fixed in repair complete all as specified and directed.

Chromium plated stainless steel wire basket (storage basket) pull out type for large utensils, size 480 x 500 x 150 mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed.

Chromium plated stainless steel wire basket (cup and saucer basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed

Chromium plated stainless steel wire basket (plate basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed.

Chrome plated stainless steel wire basket (cutlery basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed..

Chromium plated stainless steel wire basket (Grain Trolley) pull out type, size 480 x 500 x 200 mm Grade 304 with necessary sliding frame structure, fixing clips etc fixed in repair complete all as specified and directed.

Chrome plated stainless steel wire basket (Bottle pull out) pull out type two self, size 120 x 500 x 432 mm with necessary sliding frame structure, fixing clips etc fixed in repair complete all as specified and directed.

Aggrawal Builders and Furnishers

M/s RP AGRAWAL

M/s RK ENTERPRISES

Meher enterprises