Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.5 LAccepted-AOC PMC 24 528 GROUND FLOOR NEAR PAYYANUR SERVICE CO OP BANK KOTTY BRANCH PAYANNUR KANNUR KERALA 670307 | PAYYANUR | KANNUR | KERALA | 670307 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹26.6 L+₹2.1 L (8.77%)Rejected-Finance C 234 ADG P CHENNAI | L2 | Rejected-Finance Other than lowest tenderer | |
| 3 | L3₹27.4 L+₹2.9 L (11.9%)Rejected-Finance RP IV 23 PUNNAKADAVU JN RAMANTHALI P O KANNUR 670308 | KANNUR | KANNUR | KERALA | 670308 | L3 | Rejected-Finance Other than lowest tenderer | |
| 4 | L4₹29.4 L+₹4.9 L (20.1%)Rejected-Finance AMBADIL NEAR PAACHAKKIL BUS STOP MALAPARAMBA POST KOZHIKODE DISTRICT KERALA 673 009 | KOZHIKODE | KOZHIKODE | KERALA | 673009 | L4 | Rejected-Finance Other than lowest tenderer | |
| 5 | L5₹29.8 L+₹5.3 L (21.9%)Rejected-Finance | L5 | Rejected-Finance Other than lowest tenderer |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
9 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(MAINT)EZHIMALA
GARRISON ENGINEER (MAINT) MILITARY ENGINEER SERVICES INDIAN NAVAL ACADEMY POST KANNUR DIST KERALA 670 310
AS PER BOQ AND TENDER DOCUMENTS
2024_MES_642003_1
GE MAINT EZHIMALA 8619
Open Tender
Civil Works
Item Rate
90 days
EZHIMALA
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE MAINT EZHIMALA
₹70,000
Yes
20 May 2024
12 Feb 2024
11 Mar 2024
12 Feb 2024
9 Mar 2024
26 Feb 2024
13 Feb 2024 - 20 Feb 2024
Amount
Notes:- (i) The scope of work is to be carried out from ground level to nearly upto 45 metres of height. (ii) Quoted rates are deemed to be included for using mechanical means for surface preparation and application of paint as per manufacturer's instruction all as specified and directed by Engr-in-Charge. (iii) Quoted rates are deemed to be included for scaffolding as required. Contractors should arrange necessary scaffolding and all safety precautions for workers at the time of carrying out works as described in Sch 'A'/ BOQ. (iv) Contractor should visit the site before quoting the tender to assess the resources required to execute the work as the site which include prestigeous buildings of INA. (v) Contractor need to do preparation and painting of kerb stone / crash barriers by mechanical methods only. (vi) Contractor need to ensure the safety of labours working at heights with taking insurance policy, providing proper PPE kit and adhere all safety norms. (vii) Contractor need to remove all debris obtained from work without any delay to the dumping yards shown by department anywhere inside INA Ezhimala area. (viii) Contractor need to understand the importance of POP and should employ sufficient labours to meet the requirements. (ix) Contractor should procure the entire quantity of paint as per CA in single purchase and all the buckets should be numbered and shown to Engr in Charge with in 20 days of acceptance. If there is any valid reason for delay in procurement, the reason shall be informed to Engr in Charge on time in writing. (x) All the surfaces should be cleaned with water jet wash/ mechanical means before application of paint. All painting work will also be done through mechanical means. (xi) No electricity will be supplied by MES. Contractor should make own arrangements for transportation of water needed for washing, generator for electricity etc without any extra charge to the department. (xii) Contractor should ensure proper covering of areas adjacent to painting with plastic sheets/ papers to avoid dripping marks of paint. Contractor should clean then and there if any painting drops/marks immediately before shifting to next place.
M&L preperation of old decorated surfaces and applying one coat of sandtex matt finish on wall including necessary scaffolding all as specified and as per manufacturer's instructions.
M&L for preparation of old treated celling surfaces and applying one coat of white wash on ceiling including necessary scaffolding complete all as specified and as directed.
M&L for preparation of old decorated wall surfaces and applying one coat of oil bound distemper complete all as specified and as directed.
M&L for preparation of old treated surfaces and applying one coat of acrylic emulsion paint interior grade on wall including necessary scaffolding complete all as specified and as per manufacturer's instructions.
M&L for complete removal of existing treatment and applying two coats of acrylic emulsion paint interior grade on wall over a coat of acrylic primer over a coat of putty including necessary scaffolding complete all as specified and as per manufacturer's instructions.
M&L for preparation of old treated surfaces and applying one coat of acrylic emulsion paint interior grade on ceiling including necessary scaffolding complete all as specified and as per manufacturer's instructions.
M&L for preparation of old treated surfaces and applying one coat of acrylic emulsion paint exterior grade antifungal paint on wall including necessary scaffolding complete all as specified and as per manufacturer's instructions.
M&L for preparation of old painted steel/iron surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint including necessary scaffolding complete all as specified and as directed.
M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth upto a height of 20 meters and applying one coat of epoxy paint including necessary scaffolding and using suitable mechanical sprayer complete all as specified and as directed by Engr in charge.
M&L for preparation of old plastered surfaces by using water jet washer and applying one coat of acrylic emulsion paint exterior grade on surfaces of parapet wall/ kerb stone guard wall etc with using mechanical sprayer to paint complete all as specified and as directed.
M&L for complete removal of existing treatment and preperation of surface by water jet washer and applying two coats of synthetic enamel paint on surfaces parapet wall / kerb stone over and including priming paints plaster coat etc. using mechanical sprayer to paint complete all as specified and as directed.
M&L for preparation of old plastered surfaces by using water jet washer and applying one coat of synthetic enamel paint on surfaces of wall / kerb stone over and including priming paint plaster coat etc. using mechanical sprayer to paint complete all as specified and as directed.
All as per item No.13 above but two coats of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of old treated wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of old treated MP roof tile surfaces by cleaning with wire brushes to remove all existing fungal growth etc and applying one coat of antifungal paint using UNIGLOSS deluxe multi surface paint or equivalent make including necessary scaffolding using suitable mechanical sprayer all as specified and as directed by Engineer in charge and as per manufacturer's instructions.
M&L for painting lines, dashes, arrows, letters etc on road, pavement and the like not exceeding 10 cm and 2.5 mm thick using hot thermoplastic road marking paint for centre line and pedestrain crossing mixed with reflectorising glass beads at 250grams/Sqm all as specified on finished road surfaces in molten state using suitable mechanical sprayer all as specified and as directed by Engineer in charge.
Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid dry or in mortar complete all as specified and as directed.
M&L for stone grit for cushion bed below interlocking paver blocks complete all as specified and directed by Engineer in charge.
M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment complete all as specified and as directed.
All as per item No.20 above but except tiles complete all as specified and as directed.
M&L for complete removal of existing treatment from the wood and wood based surface of any description over 10cm in width or girth and applying wood filler liquid transparent and two coats of synthetic varnish complete all as specified and as directed.
M&L for preperation of old treated surfaces of floor and applying one coat of terracota paint on floor/wall surfaces complete all as specified and as directed.
Dismantling and cleaning for refixing of sadarahalli stone cladding fixed with clamps including necessary scaffolding/boomlift arrangement of appropriate design upto a height of 30 meters from finish/average ground level complete all as specified and as directed.
S&F 20 to 25 mm thick flame finished sadarahalli machine cut stone cladding laid dry fixed with stainless steel clamp and anchor fasteners and bolts on vertical surface of wall and column by the following method:- a) Make suitable depression (approx. 5mm width and 25 mm depth on vertical face of stone to fix the clamp) b) Make suitable drill hole to the surface of stone and wall/column to fix anchor fasteners etc c) Make good the surface of drilled portion (where bolts are inserted) using universal surface filler (supertak or equivalent) Note:- Supply only Hilti make anchor fasteners, clamps and bolts shall be measured and paid separately.
All as per item No.25 above but except sadarahalli stone complete all as specified and as directed.
Supply only hilti make stainless steel anchor fastener- 10 x 80mm and stainless steel clamp 5 x 50 mm for fixing of sadrahally stone cladding complete all as specified and as directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.
M&L for providing polyester foil coated aluminium alloy /calcium silicate boards (metal planks) for false ceiling/wall all as per manufacturers instructions and all as specified.
All as per item No 29 above but fixing only complete all as specified and as directed.
S&F hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.
M&L for premix bitumen / readymix bitumen filled in pot holes or unlevelled road surfaces after cleaning the pot hole thoroughly using broom, gunny bags etc. The bitumen surface shall be levelled and matched with adjacent road surfaces and should be tamped and consolidated with manual/ mechanical methods.
Grinding & polishing (Mirror finish) to existing stone topping (Kota stone, Marble etc..) of any description at floors or in surfaces with electric grinding machine & hand grinding machine complete all as specified and as directed.
M&L for 20mm thick granite (of any type) tiles machine cut, in flooring,skirting, dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 20 mm thick rendering with cement mortar 1:6 complete all as specified and as directed.
M&L for preparation of old painted surfaces n.exc 10cm width or girth and applying one coat of synthetic enamel paint on steel/iron surfaces including rafter, purlines ( upto 9 mtr height) and sign board post etc. complete all as specified and directed by Engr-in-Charge.
M&L for one coat of synthetic enamel paint on wall of any description to match with existing colour including preparation of old surfaces complete all as specified and as directed.
GMS Builders
SANDR
EXCEL ENGINEERING
ERVIN BUILDERS
KDR CONSTRUCTION
AS ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .