Construction Work of Pump Room, HSCF Pumping Machinery With Co-Ordinate Mechanical and Electrical Accessories, M.S. and D.I. Pipe Line And Water Treatment Plant For Near Gayatri Mandir Tekri Filter Plant and Machhu Dam-1 Filter Plant, At. Wankaner Dist.: Morbi Under 15th Finance Commission Grant (Tide) Year-2022-23 (Fifteenth Call)

NAME OF WORK: CONSTRUCTION WORK OF PUMP ROOM, HSCF PUMPING MACHINERY WITH CO-

ORDINATE MECHANICAL AND ELECTRICAL ACCESSORIES, M.S. AND D.I. PIPE LINE AND WATER

TREATMENT PLANT FOR NEAR GAYATRI MANDIR TEKRI FILTER PLANT & MACHHU DAM-1 FILTER

PLANT, AT WANKANER

TOTAL AMOUNT PUT TO TENDER

TOTAL AMOUNT PUT TO TENDER

PERCENTAGE RATE TENDER

Sr.No. Schedule Amount

1 Schedule - "B"- 1

2 Schedule - "B"- 2

3 Schedule - "B"- 3

4 Schedule - "B"- 4

Total Amount Rs.

Total Amount Rs.

I/We am/are willing to carry out the work @ ________% Above / Below_____________Percentage (should be

writen in figures and words) of the Estimated rates mentioned above amount of my / our Tender works out as

Estimated Amount Estimated Amount

Put to Tender Rs. 52,84,139=00 Put to Tender Rs. 52,84,139=00

Add ..............% Rs. Deduct %Rs.

Total Rs. Total Rs.

(In Words (In Words

Signature of the Contractor

Consl. Engineer Engineer

"DESIGN POINT" Wankaner Nagarpalika

Amreli Wankaner

Chief Officer President

Wankaner Nagarpalika Wankaner Nagarpalika

Wankaner Wankaner

Noe:- The prices shall be quoted exclusive of GST which shall be paid extra at prevailing rate if

shall have to borne by the agency which shall be not be reimbursed

WANKANER NAGARPALIKA - WANKANER

SCHEME :- 15TH FINANCE COMMISSION GRANT (TIDE) YEAR-2022-23

NAME OF WORK :- PROVIDING, SUPPLYING, INSTALLATION, TESTING & COMMISSIONING OF HSCF

PUMPING MACHINERY WITH CO-ORDINATE MECHANICAL & ELECTRICAL ACCESSORIES

Location : NEAR GAYATRI MANDIR TEKRI FILTER PLANT & MACHHU DAM-1 FILTER PLANT,

SCHEDULE - "B-1"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

(A) MECHANICAL SECTION

Supply, Testing & Commissioning of Horizontal Split casing centrifugal

pump motor set of specified duty parameters & guaranteed efficiency

of following MOC with specified capacity, horizontal foot mounted

TEFC squirrel cage induction motor, working on three phase AC

supply with 50 Hz ± 3%, 415 V ± 10%, rated speed 1450 RPM along

with fabricated MS base frame, coupling, coupling guard, foundation

bolts etc. as per relevant IS. M.O.C.: Impeller & Wearing Rings:

CF8M, Casing: Cast Steel WCB, Shaft: SS 410, Shaft Sleeve: SS

410, Mechanical Seal (above 30 kW), Base Frame: MS As per

required Capacity:- 87 LPS x 55 Mtr. head (1450 RPM) with min.

prime mover of 75 KW x 2 sets (1W+1S) = 150 KW 31.00 KW to

Erection Charges for Horizontal Split casing centrifugal pump sets

(without material supply) 31.00 KW to 75.00 KW 2.00 12500.00 Job

Supply at Site, Storage, Installation, Testing & Commissioning of

MM Ø Delivery piping with Suction Strainer,Flanges,Bolts, Nuts, and

Pipings with Y-Tee Connection Flanges, Concentric / Eccentric /

Nozzles etc. Complete. As per.Is Standared etc . 700.00 109.36 Kg

Supply at Site, Storage, Installation, Testing & Commissioning of

MM Ø Suction piping with Suction Strainer, Flanges, Bolts, Nuts,

and Pipings with Y-Tee Connection Flanges, Concentric / Eccentric /

Nozzles etc. Complete. As per.Is Standared etc . 1000.00 109.36 Kg

Supply at Site, Storage, Erection, Installation, Testing &

commissioning of M.S 400 mm Ø Common Header Pipings with Y-

Tee Connection, Flanges, Bolts, Nuts Piping etc. Complete as per

relevent IS Standard & requirement. 750.00 109.36 Kg

Supply at Site, Storage, Erection, Installation, Testing &

commissioning of M.S 100 mm Ø By pass Pipings with Y-Tee

Connection, Flanges, Bolts, Nuts etc. Complete as per relevent IS

Standard & requirement 150.00 109.36 Kg

Supply at site, storage, Erection, installation, testing & commissioning

of 250 mm Ø Both End Flanged Butterfly Valve as per IS 13095 with

sleeve of EPDM & disc, shaft & internal parts of SS-410, with ISI mark

of PN 1.6 Rating to be installed on Delivery Pipe complete as per

specifications & requirement. 2.00 9866.00 No.

Supply at Site, Storage, Erection, Installation, Testing &

Commissioning of 250 mm Ø with Both End Flanged Butterfly Valve

For Suction pipe PN 1.6 Rating and ISI mark of IS 13095 with sleeve

of EPDM & disc, shaft & internal parts od SS - 410 & with ISI Mark

only as per technical specification & requirement. 2.00 9866.00 No.

Supply at Site, Storage, Erection, Installation, Testing &

Commissioning of 400 mm Ø with Both End Flanged Butterfly Valve

For Header PN 1.6 Rating and ISI mark of IS 13095 with sleeve of

EPDM & disc, shaft & internal parts od SS - 410 & with ISI Mark only

as per technical specification & requirement. 1.00 35105.00 No

Supply at site, storage, Erection, installation, testing & commissioning

of 250 mm Ø C.I. D/F reflux valve on Delivery pipe confirming to

relevent standard with PN 1.6 rating etc. Complete as per

specifications. 2.00 28776.00 No

Supply at site, Storage, Erection, Installation, Testing &

commissioning of 400 mm Ø both end flanged reflux valve for Header

pipe confirming to relavent standard with PN 1.6 Rating of Approved

make etc. Complete as per Techanical Specification & requirement. 1.00 85480.00 No.

Supply at site, Storage,Erection, Installation, Testing & Commissioning

of Both End Flanged 100 mm Ø C.I. Non Rising Spindle Type Sluice

Valve of PN 1.6 with hand / wheel cap opereted (pd type short body)

Rating etc. Complete (For Air valve on Header Pipings & Bypass

piping) as per relavant Std. & Specification With ISI Mark Only 1.00 4037.00 No.

Supply at site, Storage, Erection, Installation, Testing &

commissioning of DS 2 Type 100 mm Ø Air Double Acting Valve on

Header Pipings as per relavant Std. with Approved make etc.

Complete as per Specification. 1.00 5793.00 No.

Supply at Site, Storage, Erection, Installation, Testing &

Commissioning of flange ends Expansion Bellow as per EJMA

standards of overall length of minimum 300 mm, designed for 15 mm

axial compression and 5 mm axial extension with tie rods etc. of

following MOC & pressure ratings. MOC: Bellows: SA 240 Gr. 304;

Internal Sleeve: SA 240 Gr. 304; Weldends: IS 2062 Gr. B; Flanges:

IS 2062 Gr. B (Drilling as per IS 1538 /IS 6392 ) & Limit Rods & Nuts:

CS - IS 1367 for Common Delivery Piping 250 mm Ø PN 1.6 2.00 8192.00 No.

Supply at Site, Storage, Erection, Installation, Testing &

Commissioning of flange ends Expansion Bellow as per EJMA

standards of overall length of minimum 300 mm, designed for 15 mm

axial compression and 5 mm axial extension with tie rods etc. of

following MOC & pressure ratings. MOC: Bellows: SA 240 Gr. 304;

Internal Sleeve: SA 240 Gr. 304; Weldends: IS 2062 Gr. B; Flanges:

IS 2062 Gr. B (Drilling as per IS 1538 /IS 6392 ) & Limit Rods & Nuts:

CS - IS 1367 for Suction Piping 250 mm Ø PN 1.6 2.00 8192.00 No.

Supply at Site, Storage, Erection, Installation, Testing &

Commissioning of flange ends Expansion Bellow as per EJMA

standards of overall length of minimum 300 mm, designed for 15 mm

axial compression and 5 mm axial extension with tie rods etc. of

following MOC & pressure ratings. MOC: Bellows: SA 240 Gr. 304;

Internal Sleeve: SA 240 Gr. 304; Weldends: IS 2062 Gr. B; Flanges:

IS 2062 Gr. B (Drilling as per IS 1538 /IS 6392 ) & Limit Rods & Nuts:

CS - IS 1367 for Header Piping 400 mm Ø PN 1.6 1.00 17640.00 No.

Providing, Supplying, Erecting approved make coupled vacuum pump

set with horizontal foot mounted TEFC squirrel cage motor having

under mentioned capacity working on 3ph, 50hz, 415V±10%, with

base plate, DOL starter, cable, GI medium duty suction pipes-10 mtr.

long, specials, valve, PVC tank of 250 ltr capacity etc. complete.

Material of Constructions: Impeller- SSCF8M, Shaft- SS410, Casing-

CIFG260 5 HP capacity 1.00 52440.00 Nos

Design, Supply, Installation, Testing, Commissioning of Bourdon Type

Pressure Gauge, ±1% accuracy, Direct bottom 1/2" NPT (M) process

connection, IP 67, Glycerine filled, SS304 Case with Bayonet Type

Bezel, SS316 L Bourdon Tube, SS 316 Movement material,

Aluminium dial with black graduation on white background, Micro Zero

adjustable pointer, neoprene gasket, Blow out disc, shatter proof

glass, SS tag plate etc as per IS 3624. 100MM dia dial size (i) 0 to

kg/cm² 2.00 1029.00 Nos

Providing & Laying Reinforced Cement Concrete in Thrust Block /

Piping / Valves Supports etc. with TMT steel, Black Trap Kapchi as

Coarse Aggreate for Raft,Grillage Footing with Necessary Centering

Form work, Consolidating as per Directive in 1:2:4 Ratio comp. as per

site requriement 4.00 8566.40 Cum

Supply at Site, Storage, Erection, Installation, Testing &

Commissioning of M.S. specials flanged ends

For Tee, Bend, Reducer etc. 984.00 109.36 Kg

(B) ELECTRICAL SECTION

S.I.T.C. of LV MCC Panel totally enclosed, dust & bermin proof, indoor

type, minimum degree of protection - IP 52 as per IS: 2147, operation

on 3- Phase, 4 Wire, 415V, 50Hz, Neutral effectively grounded, with

instrumentation compartments accomodating LED type indicating

lamps, control contactors as per IS: 13947, CT of accuracy class- I as

per IS: 2705, relays, meters & control MCBs, air insulated electrolitic

grade Aluminum busbar for three phase & neutral system with

incomming breaker- microprocessor based Air Circuit Breakers

(electrically operated drawout type)/ air break fixed type MCCB with

trip free mechanism, current limiting type as per IS: 8828, Motor

Contractor (as per type -2 coordination), Overload Relay with built-in

single phasing prevention feature & auxiliary feeders as per SLD

drawings, momentary contact type push buttons,

equipment fittings, bus bars, cable boxes, cable gland, incoming &

ougoing cable connection for 1100V grade, Aluminium/ Copper

conductor XLPE/ PVC insulated & PVC sheathed armoured cable,

10% spare terminals, power wiring using 1100V grade, FRLS

insulated copper conductor wires conforming to IS: 694 & 8130, cable

compartments/ alleys of minimum 300mm size, GI earth bus bar for

entire length. MCC shall be fabricated from cold rolled, coled annealed

(CRCA) sheet steel & minimum thickness of various members shall

be as follows: Base Frame/ Channel/ Gland Plate - 3 mm, Load

Bearing Members/ Doors - 2 mm and Internal Partitions - 1.6 mm.

Microprocessor based Soft Starter with built-in by pass

contactor,Semiconductor Fuses, Harmonic Filters, cast resin

type CT, Digital MFM, Analogue Ammeter & minimum 10 Channel

Temperature Scanner with RS 485 communication port. (Size

2700mm(w) x 600mm(d) x 2175mm(h)) of 75 KW = 1 Working

Feeder + 1 Extra Feeder 1.00 424737.00 No

Supply, laying, testing & commissioning of 1.1 kV grade, XLPE

insulated, stranded Copper conductor, galvanised steel flat strip /

round wire armoured, extruded PVC type ST2 sheathed, heavy duty

cable (to be laid on wall surface with necessary clamps / in existing

cable trench / cable trays / conduit / pipe sleeves at road crossing or

floor as per site requirement) conforming to IS:7098 (Part-1) &

IEC:60502 (Part-1) etc. comp. with reqd. accessories.

Size : 1 x 3 core x 50 Sq.mm. (Main Supply) 50.00 991.00 Mtr

Supply, laying, testing & commissioning of 1.1 kV grade, XLPE

insulated, stranded Copper conductor, galvanised steel flat strip /

round wire armoured, extruded PVC type ST2 sheathed, heavy duty

cable (to be laid on wall surface with necessary clamps / in existing

cable trench / cable trays / conduit / pipe sleeves at road crossing or

floor as per site requirement) conforming to IS:7098 (Part-1) &

IEC:60502 (Part-1) etc. comp. with reqd. accessories.

Size : 1 x 3 core x 35 Sq.mm. (Panel Board to Motar) 80.00 731.00 Mtr

Supply & laying GI perforated type cable trays with returned edge/

flange, fabricated from 2.0 mm thick sheet steel in the standard length

of 2.5 mtrs, duly hot dipped galvanized after fabrication as per IS 2629-

1989 / IS 4759-1984 including accessories such as coupler plates/ fish

plates, bends, tees, reducers, elbows, covers and electro-galvanized

hardware etc, erected on existing support as per specification and

instruction of engineer in charge. Size:- 100mm (W) x 35mm (H) x

2mm Thick 25.00 228.00 Mtr

Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free G.I.Pipes

having Outer pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic value

surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications. (b) For Electrical

Installation up to 440V in normal soil Length of pipe - 1 Mtr Back filling

compound - 1 Nos Bag of 15 Kg. 2.00 4546.00 Each

Total Amounts Rs...….

Total Amounts Rs...….

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Wankaner Nagarpalika

Amreli Wankaner

Chief Officer President

Wankaner Nagarpalika Wankaner Nagarpalika

Wankaner Wankaner

WANKANER NAGARPALIKA - WANKANER

SCHEME :- 15TH FINANCE COMMISSION GRANT (TIDE) YEAR-2022-23

NAME OF WORK :- LOWERING, LAYING AND JOINTING OF M.S. & D.I. PIPE LINE

Location: NEAR GAYATRI MANDIR TEKRI FILTER PLANT & MACHHU DAM-1 FILTER PLANT, AT WANKANER

SCHEDULE - "B-2"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

M.S. specials flanged ends above 300mm dia 1013.00 98.00 Kg

Manufacture, Supply & Delivery of Ductile Iron Flange socket spigot

bends,tees, reducers or any other specials as per BS-EN-545/1995

Class-A series K12 suitable for use with D.I.Pipes manufactured as

per IS:8329/1994 delivery of specials is to be made to GWSSB store

or site of works anywhere in Gujarat including all taxes, loading,

unloading, carting, stacking, insurance, inspection charges, octroi etc.

complete with external bitumen & zink coating & internal cement

mortar lining.Flanged ended 350mm dia & above 1374.00 158.00 Kg

Providing and supplying ISI mark CI D/F Butterfly Valves as per

IS:13095 (Latest Edition) of following class and diameter including all

taxes, insurance, transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to departmental stores,

stacking etc. complete Butterfly valve with IS 13095 with ISI mark

Providing, supplying and delivery of CI Manhole frame and cover incl.

all taxes, loading, unloading and carting upto departmental stores etc.

Excavation for pipe line trenches for water supply, sewerage line,

manhole etc. all with shoring and strutting if required as per required

gradient and line including safety provisions using site rails and

stacking excavated stuff including up to all required lead cleaning the

site etc. complete for all lifts and strata as specified. Up to 1.50 mt.

depth a) In all sorts of soil and soft murrum 168.00 102.35 Cum.

b) In hard murrum, boulders incl. macadam road 360.00 155.25 Cum.

c) In soft rock and / or masonry in CM or LM or Lime Concrete 192.00 187.45 Cum.

1.50 mt. to 3.00 mt. depth c) In soft rock and / or masonry in CM

or LM or Lime Concrete 39.00 205.85 Cum.

d) In hard rock and / or in C. C. 1:2:4 or RCC with blasting,

breaking, chiseling, or by chiseling / breaking only 30.00 446.20 Cum.

Lowering, laying, jointing & welding in position to correct line & level

M.S. Pipe with outer side 3 LPE coating & inside solvent free liquid

epoxy lining on pedestal or chairs upon prepared formation or

prepared bedding in trenches the rates include conveyance from store

to site of work loading, unloading, heat shrink sleev jointing hydro

testing etc. complete. Pipe will be supplied by nagarpalika 4mm to

7mm thick For 406.4mm dia M.S. Pipe 200.00 569.25 Rmt

Lowering, laying and jointing C. I. S&S Spun pipes suitable for Tyton

joints / Mortar lined D. I. Pipes of various classes with CI / MS specials

of following diameters in proper position, grade and alignment as

directed by Engineer-in-charge including hydraulic testing etc.

comp.Pipe will be supplied by nagarpalika For 450mm dia D.I.

Lowering, laying and jointing in position following C. I. / D/F Reflux

valves, Butterfly valves, Sluice valves and Air valves including cost of

all labour, jointing material, including nut bolts and giving satisfactory

hydraulic testing, etc. complete Butterfly valves 400mm dia 1.00 2266.65 No

Construction of valves chambers in brick or bela stone masonry,

locally available in C. M. 1:6. Foundation concrete 150 mm thick in C.

C. 1:4:8 of trap metal size 25 mm to 40 mm thick, inside cement

plaster in C. M. 1:3 and cement pointing outside in C. M. 1:3 and top

cover of precast RCC slab 100 mm thick (with key hole in two parts,

each with handles or MS Bar etc. complete as given size) Upto 1 Mt.

depth from G. L. to pipe invert level incl. complete civil works incl. cost

of excavation and refilling, with cast in situ RCC slab in one single

piece with fixing of CI-MH Frame and cover (excl. cost of CI-MH

Frame and cover) with 23 mm thick brick masonry wall in C.M.1:6 with

single piece 10 cm with fixing M.H. cover Size 1.30 x 1.30 x 1.00 mtr.

Refilling the pipeline trenches incl. ramming, watering, consolidating

disposal of surplus stuff as directed within a radius of 3 km. Refilling

as directed 707.05 25.30 Cum.

Making job connection for old pipes in connecting the pipe line with

existing main and inserted of special incl. cost of excavation, refilling,

cutting of pipes, dewatering testing, refitting etc. complete incl. all

jointing materials etc. comp. (excl. cost of specials, pipes fittings) 6.00 7500.00 Job

Total Amounts Rs...….

Total Amounts Rs...….

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Wankaner Nagarpalika

Amreli Wankaner

Chief Officer President

Wankaner Nagarpalika Wankaner Nagarpalika

Wankaner Wankaner

WANKANER NAGARPALIKA - WANKANER

SCHEME :- 15TH FINANCE COMMISSION GRANT (TIDE) YEAR-2022-23

NAME OF WORK :- CONSTRUCTION WORK OF PUMP ROOM

Location : NEAR GAYATRI MANDIR TEKRI FILTER PLANT & MACHHU DAM-1 FILTER PLANT,

SCHEDULE - "B-3"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Designing (aesthetically) and constructing R.C.C. frame structure of

pump room as per design, requirement and specification at various

site. incl. doors, windows & required electrical wiring, light points & all

associated civil works like conection to sump through inlet pipe,

supporting work to hedder main, jungle cutting, site clearance and

debris removal etc. complete.Design for positive / negative suction

and height of pump house shall be considered Up to 6.00 M (Plinth

Level to Top slab Beam bottom) with gantry structure

Note:- 1. Minimum 15% opening for ventilation should be provided.

2.Pump room rolling shutter, door and windows of aluminium section

and window grill of iron should be provided (Included in Cost). 3. Plinth

level of Pump house should be min. 1 meter above GL. 4. Cost does

not include foundation for pumping machinery. Size : 5 mtr. x 7 mtr. 35.00 17596.98 Sqm.

Total Amounts Rs...….

Total Amounts Rs...….

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Wankaner Nagarpalika

Amreli Wankaner

Chief Officer President

Wankaner Nagarpalika Wankaner Nagarpalika

Wankaner Wankaner

WANKANER NAGARPALIKA - WANKANER

SCHEME :- 15TH FINANCE COMMISSION GRANT (TIDE) YEAR-2022-23

NAME OF WORK :- RENOVATION WORK OF WATER TREATMENT PLANT

Location : NEAR GAYATRI MANDIR TEKRI FILTER PLANT & MACHHU DAM-1 FILTER PLANT,

SCHEDULE - "B-4"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Filter Media - Sand for Rapid Sand Filter Bed Providing & Supplying the

filter sand of specified effective size (0.45 to 0.70 mm) and uniformity

coefficient (not more than 1.7, nor less than 1.3) and laying over gravel

support conforming to IS : 8491 (i) – 77 in filter bed of required depth as

per design and drawing. Inclusive of all lead. 29.40 1468.55 Cum

Filter Gravel Providing & supplying gravels of different size as per design

and drawing and laying in layers in filter beds Inclusive of all lead. 19.60 1468.55 Cum

Under Drains System Providing & laying & fixing PVC laterals (pipes)

kg/sq.cm of size & perforations as per the hydraulic design to resist 10 m

Back wash water head for filter bed area 39.20 2447.20 Sqm

Flash Mixer : Apertures Providing, installing & commissioning Flash

mixer impeller with motor, gear arrangement & electrical cable,

connections, control panels etc. (size as per design) 3HP 1.00 72293.60 No

C.I. Gates Providing fabricating and fixing / installing C.I. gates of size as

per design with operating handle etc. for by pass arrangement with ISI

mark 500mm dia 856.00 94.30 Kg

Motors and Gearboxes : For clari Bridge Extra for 3 motors of required

RPM and 3 gear box assemblies with one slippering unit including wiring

and installing switch and control panel as per requirement. 1.00 122342.75 Set

Chemical Dosing Pump incl. Tank Providing and installing chemical

dosing metering pump model V-12 with PP head and flow of suitable size 1.00 13903.50 No.

Chlorination Plant : Providing, installing & commissioning Chlorination

plant as per design capacity with Pressure feed type chlorinator with

injector booster etc. complete 5 Kg./Hr. capacity 1.00 52273.25 Set

Refilling of Chlorine Gas Cylinder : Refilling of Chlorine gas in cylinder

including transportation to and from factory and back b) Chlorine

cylinders 100 kg. 6.00 2002.15 No

c.1) Emergency drum leakage kit 100 kg. 2.00 46713.00 No

Transportation of chlorine gas cylinder with loading, unloading, cylinder

transportation should have licence public liability insurance at 1991 a)

kg. cylinder 6.00 1668.65 No.

Supply of Chlorine Cylinders (Empty) Providing and supplying Chlorine

gas cylinder empty of required capacity with necessary explosive

certificates including all taxes b) Chlorine cylinders 100 kg. 6.00 30986.75 No.

Laboratory Instruments a) Digital PH Meter Providing and supplying

microprocessor based digital pocket PH tester. 1.00 8299.55 No.

b) Digital TDS Meter Providing and supplying microprocessor based

digital pocket TDS tester. 1.00 8631.90 No

c) Fluoride Test Kit (Digital) Providing and supplying fluoride spot test

Manufacture, Supply & Delivery of Electric Resistance Welded (Up to

400mm) / Submerged Arc Welded (Above 400mm) M.S. Pipe having

beveled ends plate or coil conforming to IS-3589-2001 or its latest

revision/ ammendment for following thickness outside diameter at

GWSSB store or site anywhere in Gujarat State including all taxes,

insurance, transportation, freight charges, octroi, inspection charges,

loading, unloading conveyance to Departmental stores, stacking etc. all

complete.I/S epoxy Painting (100 Micron) & O/S Gunniting (25 mm

Thick) 168.3mm dia (4.5mm thick) 25.00 1550.00 Rmt

219.1mm dia (4.5mm thick) 15.00 2023.00 Rmt

Lowering, laying, jointing & welding in position to correct line & level M.S.

Pipe with outer gunniting & inside lining / epoxy painting on pedestal or

chairs upon prepared formation or prepared bedding in trenches the rates

include conveyance from store to site of work loading, unloading, joint

plastering, hydrotesting etc. complete. 4mm to 7mm Thick 168.3mm dia

(4.5mm thick) 25.00 207.00 Rmt

219.1mm dia (4.5mm thick) 15.00 248.40 Rmt

Providing and supplying ISI mark G. I. pipes with Couplings of following

class and diameter including all taxes, insurance, transportation, freight

charges, octroi, inspection charges, loading, unloading, conveyance to

departmental stores, stacking etc. complete. (IS-1239) (Not for well/tube

well column pipe) Heavy Duty 100mm dia 20.00 992.00 Rmt

Lowering, laying and jointing G. I. pipes with G. I. specials of following

diameters in proper position, grade and alignment as directed by Engineer-

in-charge including conveyance from stores to site of work, labour, giving

hydraulic testing, etc. complete 100mm Dia 20.00 39.10 Rmt

150mm dia 15.00 56.35 Rmt

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of

M.S. specials flanged ends Upto 300mm dia Flange, Tee, Reducer,

Bend etc. 683.00 111.07 Kg

Providing & Laying Reinforced Cement Concrete in Thrust Block / Piping /

Valves Supports etc. with TMT steel, Black Trap Kapchi as Coarse

Aggreate for Raft,Grillage Footing with Necessary Centering Form work,

Consolidating as per Directive in 1:2:4 Ratio comp. as per site

requriement 11.25 9851.36 Cum

Providing chain pulley block with triple gear arrangement, lifting hook, load

chain & hand chain & locking device etc. 1 Tonne capacity, manually

operated, 6.00m. lift 1.00 14400.00 Set

Total Amounts Rs...….

Total Amounts Rs...….

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Wankaner Nagarpalika

Amreli Wankaner

Chief Officer President

Wankaner Nagarpalika Wankaner Nagarpalika

Wankaner Wankaner