Supply,delivery and fixing of 100HP Centrifugal Horizontal end suction Mixed flow pumpset at (Bund area) HWW in RMC.

Supply and transportation of KIRLOSKAR make Centrifugal Horizontal end suction Mixed flow pump of type: MF25-30, Suc X Del=300 X 250, (Flow=1000m3/hr vs Head=18mtr) Cl impeller Gland pack pump is coupled with 75KW/100HP 1440RPM CROMPTON/KEC (IE2)make motor mounted on a common base frame

Errection charges of above pump including removing of old pumpset, removing old foundation and fixing of new pumpset with laying new foundation etc., complete as directed by the departmental authorities

Maufacture, supply, delivery and fixing of required M.S. fabricated Pipe and specials (Bends, Tees and Reducers etc.) using required size M.S. sheet and providing redoxide paint and anticorrosion paint two coats including cost of all materials, conveyance to work spot fixing in position and all labour charges fabrication charges etc. complete as per the instructions of the Departmental Authorities.

Supply and delivery of "Resilient Seated Soft Sealing" gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40 / SG-400/15 or GGG-50 / SG-500/7 of Equivalent as per IS 1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3- O ring protection system on the Shaft and seals of NBR. The Valves should be Vaccume tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns) - RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN - 3202F4/ BS:5163 Type A Flange drilling as per IS - 1538 including transportation. SSR 2025-2026,(PN 1.6)MPa (MAT-08067) For 250mm Sluice valve

Supply, Delivery of D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. conforming to IS- 5312 (Pts-1&2) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603); Body seat ring , Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze ( IS 318 ); Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel; excluding transportation and all taxes complete.450mm PN 1.6 MAT-08054 For 250mm NRV

Lowering, Keeping in position and fixing C.I. sluice valves (with cap / with hand wheel & Reflex valves excluding cost of Bolts, Nuts, rubber insertion, sluice valve and tail pieces. PHE-CISV-15.

Jointing C.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead upto 500 Mtrs and testing to required pressure complete (Reference to specifications BIS No.3114/1994) PHE - JCIF-5

Supply and delivery of Single Core, 50 Sq mm ISI marked, PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V as per IS 694/1990. Make:Polycab, Finolex,Havells, Fortunearrt, V-gaurd MAT-05468

Providing independent earthing for Important equipment with 100mm dia Heavy gauge C.I (Cast iron ) pipe with Flange 2.5m long enclosed in C.C/ brick masonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, ELEC-6.7.5 MAT-04139

Supply and transportation of KIRLOSKAR make Centrifugal Horizontal end suction Mixed flow pump of type: MF25-30, Suc X Del=300 X 250, (Flow=1000m3/hr vs Head=18mtr) Cl impeller Gland pack pump is coupled with 75KW/100HP 1440RPM CROMPTON/KEC (IE2)make motor mounted on a common base frame

Errection charges of above pump including removing of old pumpset, removing old foundation and fixing of new pumpset with laying new foundation etc., complete as directed by the departmental authorities

Maufacture, supply, delivery and fixing of required M.S. fabricated Pipe and specials (Bends, Tees and Reducers etc.) using required size M.S. sheet and providing redoxide paint and anticorrosion paint two coats including cost of all materials, conveyance to work spot fixing in position and all labour charges fabrication charges etc. complete as per the instructions of the Departmental Authorities.

Supply and delivery of "Resilient Seated Soft Sealing" gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40 / SG-400/15 or GGG-50 / SG-500/7 of Equivalent as per IS 1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3- O ring protection system on the Shaft and seals of NBR. The Valves should be Vaccume tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns) - RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN - 3202F4/ BS:5163 Type A Flange drilling as per IS - 1538 including transportation. SSR 2025-2026,(PN 1.6)MPa (MAT-08067) For 250mm Sluice valve

Supply, Delivery of D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. conforming to IS- 5312 (Pts-1&2) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603); Body seat ring , Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze ( IS 318 ); Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel; excluding transportation and all taxes complete.450mm PN 1.6 MAT-08054 For 250mm NRV

Lowering, Keeping in position and fixing C.I. sluice valves (with cap / with hand wheel & Reflex valves excluding cost of Bolts, Nuts, rubber insertion, sluice valve and tail pieces. PHE-CISV-15.

Jointing C.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead upto 500 Mtrs and testing to required pressure complete (Reference to specifications BIS No.3114/1994) PHE - JCIF-5

Supply and delivery of Single Core, 50 Sq mm ISI marked, PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V as per IS 694/1990. Make:Polycab, Finolex,Havells, Fortunearrt, V-gaurd MAT-05468

Providing independent earthing for Important equipment with 100mm dia Heavy gauge C.I (Cast iron ) pipe with Flange 2.5m long enclosed in C.C/ brick masonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, ELEC-6.7.5 MAT-04139

Details of Maximum amount reimbursable to the Contractor.

1) Provision for GST @18%

2) Provision for NAC @ 0.10%