SPECIAL REPAIR TO ROADS INCLUDING ALLIED WORKS AT PALAMPUR MIL STATION

Amount

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc, laid dry complete all as specified.

Rough excavation not exceeding 1.5 m deep and getting out in any type of soil, complete all as specified..

Removing excavated materials soils, not exceeding 50mtrs and depositing where directed at a level not exceeding 1.50mtrs, complete all as specified and directed.

Rolling and consolidating formation surfaces in cutting with 8 to 12 tonne power roller, including filling in soft spots, depressions, etc. which occur during rolling (for portion coming in cutting/original ground only) to required camber and gradient, etc. including watering before or during rolling, all complete all as specified and as directed .

150mm thick (Spread thickness) Soling (or sub base) with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber complete all as specified and as directed .

Water bound macaadam 150mm thick (Compacted thickness), in two layers, laid with coarse aggregate of grading 2 (63mm to 40 mm size) or of grading 3 (50 to 20mm size),using Granite, trap or Basalt of best quality locally available spread and rolled with 10 to 12 tonnes power roller, consolidated to required gradient and camber, complete all as specified.

Preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally the cleaned surfaces with power sweeper or compressor to remove all loose dirt etc, applying evenly a priming/ tack coat with bituminous primer using paving bitumen @ 10 kg per 10 sq metre of road surface, complete all as specified.

Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with power sweeper or compressor to remove all loose dirt etc., applying evenly a priming/ tack coat with bituminous primer using paving bitumen at 5 kg per 10 sq metre of road surface, complete all as specified.

Bituminous premix semi dense asphaltic concrete 40mm consolidated thickness with 5.5% bitumen binder content by weight of total mix using as per table 500-15 of Morth, rolled and compacted to required camber and gradient with 8 to 10 tonne vibrator power roller, complete all as specified and directed. Note:- Bituminous premix semi dense asphaltic concrete shall be mixed in automatic temperature controlled hot mixing plant, transported and premix carpet shall be laid in single layer with self propelled mechanical paver, rolled with vibrator roller.

Cat eye made of ABS material with nail reflective red tape of both sides of size 90mmx110mmx171mm, fixed in poistion , fixed in repair ,complete all as directed.

Continuous brick edging; with width equal to the depth of the brick, using old size fly ash bricks, laid dry, on edge complete all as specified and as directed.

Preparing bituminous/concrete surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements using hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 mixed with radium glass beads @ 250gm/ Sqm with special applicator machine to provide reflectivity and night vision (approx temp being 200°C at the time of laying) including cleaning the surface of all dirt, dust and other foreign material complete all as specified. Note:- Road marking lines at the centre of road shall not be continuous, whereas the lines at outer sides of road shall be continuous i.e in one length.

Deduct Credit Amount as per Schedule of credit as details given on Srl Page No 19 of tender doucments.

M/s RAM RATAN AND SONS (BID ID -3132714)