Contruction of karymank Proyogshala for vidik map vighyan vibhag in jwalapur haridwar

Amount

Earth work in excavation by mechanical means (Hydraulic Excavat in foundation trenches or drains (not exceeding 1.5 m in width or 1 including dressing of sides and ramming of bottoms, lift upto 1.5 out the excavated soil and disposal of surplus excavated soil as dir of 50 m. All kinds of soil As per DSR 2018 item N0( 2.8.1)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) As per DSR 2018 item N0( 4.1.8)

Filling available excavated earth (excluding rock) in trenches, plin sides of foundations etc. in layers not exceeding 20cm in de consolidating each deposited layer by ramming and watering, up to 50 m and lift upto 1.5 m. As per DSR 2018 item N0( 2.25)

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor with Chlorpyriphos/ Lindane E.C. 20% with 1%. As per DSR 2018 item N0( 2.35.3.1)

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in Cement mortar 1:6 ( 1 cement : 6 coarse sand ) As per DSR 2018 item N0( 6.1.2)

Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shape and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) As per DSR 2018 item N0( 6.4.2)

Half brick masonry with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in cement mortar 1:4 (1cement : 4 coarse sand) As per DSR 2018 item N0 (6.13.2)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) As per DSR 2018 item N0( 5.1.2)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) As per DSR 2018 item N0( 5.2.2)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete for Thermo-Mechanically Treated bars of grade Fe-500D or more. As per DSR 2018 item N0( 5.22.6)

Centring and shuttering including strutting,ropping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete As per DSR 2018 item N0( 5.9.1)

Centring and shuttering including strutting,ropping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts As per DSR 2018 item N0( 5.9.6)

Centring and shuttering including strutting,ropping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform. As per DSR 2018 item N0( 5.9.3)

Centring and shuttering including strutting,ropping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers. As per DSR 2018 item N0( 5.9.5)

Providing and fixing pressed steel door frames confirming to IS: 43 from commercial mild steel sheet of 1.25 mm thickness including h jamb, bead and if required angle threshold of mild steel angle of se or base ties of 1.25mm pressed mild steel welded or rigidly fixed t mechanical means, adjustable lugs with split end tail to each jamb butt hinges 2.5mm thick with mortar guards, lock strike-plate and as specified and applying a coat of approved steel primer after pre surface as directed by Engineer-in-charge. Profile B As per DSR 2018 item N0( 10.14.1.1)

Same as above item but for profile C As per DSR 2018 item N0 (10.14.2.1)

Steel work welded in built up section/framed work including cuttin in position and applying a priming coat of approved steel primer us required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. As per DSR 2018 item N0 (10.25.2)

Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with L-Type section made of 1.60m M.S. Sheet, joints mitred and welded and grinded finish profi required size with 15x3mm lugs 10cm long embedded in ce concrete blocks 15x10x10cm of 1:3:6 (1 cement : 3 coarse graded stone aggregate 20mm nominal size) or with wooden plugs screws or rawl plugs and screws or with fixing clips or with b nuts as required including fixing of necessary butt hinges and and applying a priming coat of approved steel primers. As per DSR 2018 item N0( 10.15.1)

Providing and laying cement concrete in retaining walls, return walls (any thickness) including attached pilasters, columns, piers, abutmets, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks, anchor blocks, plain window sills, fillets etc upto floor five level, excluding the cost of centring, shuttering and finishing in 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). As per DSR 2018 item N0( 4.2.3)

12 mm cement plaster of mix in 1:6 (1 cement : 6 fine sand) As per DSR 2018 item N0( 13.1.2)

15 mm cement plaster on the rough side of single or half brick wall of mix in 1:6 (1 cement : 6 fine sand) As per DSR 2018 item N0( 13.2.2)

6 mm cement plaster of mix in 1:3 (1 cement : 3 fine sand) As per DSR 2018 item N0( 13.16.1)

Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) As per DSR 2018 item N0( 22.14.1)

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.As per DSR 2018 item N0 (13.26)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 60x60 cm As per DSR 2018 item N0( 11.41.2.)

11.26 Kota stone slab flooring over 20 mm (average) thick base laid over andjointed with grey cement slurry mixed with pigment to match the shadeof the slab, including rubbing and polishing complete with base of cementmortar 1 : 4 (1 cement : 4 coarse sand) :11.26.1 25 mm thick

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. As per DSR 2018 item NO-( 8.3.1)

Providing and fixing Ist quality ceramic glazed wall tiles conf IS : 15622 (thickness to be specified by the manufacture ) of appr make in all colours, shades except burgundy, bottle green, black of size as approved by Engineer-in-Charge in skirting, risers of ste dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 c sand) and jointing with grey cement slurry @ 3.3kg per sqm i pointing in white cement mixed with pigment of matching sh complete. As per DSR 2018 item NO-( 8.31)

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete. As per DSR 2018 item NO- (11.37)

Making plinth protection 50mm thick of cement concrete 1:3: cement :3 coarse sand : 6graded stone aggregate 20mm no size) over 75mm bed by dry brick ballast 40mm nominal siz rammed and consolidated and grouted with fine sand includin finishing the top smooth. As per DSR 2018 item NO- (4.17)

Providing and fixing ISI marked flush door shutters conforming to I non-decorative type, core of block board construction with frame o wood and well matched commercial 3 ply veneering with vertical g bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. As per DSR 2018 item NO- (9.21.1)

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece. As per DSR 2018 item NO- (10.5.2)

Providing and fixing aluminium sliding door bolts ISI marked anodi coating not less than grade AC 10 as per IS : 1868) transparent or colour or shade with nuts and screws etc. complete. 300x16 mm As per DSR 2018 item NO- (9.96.1)

Providing and fixing aluminium handles ISI marked anodised (anod less than grade AC 10 as per IS : 1868) transparent or dyed to req shade with necessary screws etc. complete : 125 mm As per DSR 2018 item NO- (9.100.1)

Providing and fixing aluminium tower bolts ISI marked anodised (a not less than grade AC 10 as per IS : 1868 ) transparent or dyed t or shade with necessary screws etc. complete. 200x10 mm As per DSR 2018 item NO- (9.97.3)

Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Single rubber stopper As per DSR 2018 item NO- (9.101.1)

Providing gola 75x75 mm in cement concrete 1:2:4 (1 ceme coarse sand : 4 stone aggregate 10mm and down gauge) in finishing with cement mortar 1:3 (1 cement : 3 fine sand) standard design : In 75x75mm deep chase As per DSR 2018 item NO- (12.21.1)

Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete.As per DSR 2018 item NO- (4.1.3)

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter As per DSR 2018 item NO- (12.41.2)

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes. 75 mm diameter As per DSR 2018 item NO- (12.41.1.)

Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I, rain water pipes embedded in and including cement concrete blocks 10x10x 10cm of 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc.100 mm diameter. As per DSR 2018 item NO- (12.38.1.)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade As per DSR 2018 item NO- (13.41.1.)

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone for New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) As per DSR 2018 item NO- (13.47.1.)

13.61 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :13.61.1 Two or more coats on new work DSR 2018 NO. 13.61.1)

Renewing glass panes, with putty and nails wherever necessary. Float glass panes of thickness 4 mm As per DSR 2018 item NO- (14.5.1.)

Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.9.135.1 With 2nd class teak wood beading 62X19 mm(DSR 2018 NO.9.135.1)

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid As per DSR 2018 item NO- (17.2.1.)

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China W ash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. As per DSR 2018 item NO- (17.7.4.)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls 18.8.2 20 mm nominal outer dia PipesAs per DSR 2018 item NO-(18.8.2)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.18.9.2 20 mm nominal outer dia PipesAs per DSR 2018 item NO-(18.9.2)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.18.9.2 20 mm nominal outer dia Pipes 18.9.3 25 mm nominal outer dia Pipes As per DSR 2018 item NO-(18.9.3)

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete. 25 to 40 mm nominal bore As per DSR 2018 item NO- (18.13.1.)

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931. 15 mm nominal bore As per DSR 2018 item NO- (18.49.1.)

Providing and fixing C.P. brass angle valve for basin mixer and gey approved quality conforming to IS:8931.15 mm nominal bore As per DSR 2018 item NO- (18.53.1.)

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded. 150 mm diameter S. W. pipe As per DSR 2018 item NO- (19.2.2.)

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse Inside size 60x45x50 cm. inside including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg): With F.P.S. bricks with class designation 75 As per DSR 2018 item NO- (18.37.1.)

Providing and placing on terrace (at all floor levels) polyethylene water tank ISI : 12701 marked with cover and suitable locking arrangement in tank. and necessary holes for inlet, outlet and overflow pipes but without fitti base support for tank. As per DSR 2018 item NO- (18.48.)

Providing and fixing PTMT soap Dish Holder having length of 138m 102mm, height of 75mm with concealed fitting arrangements weig than 106 gms. As per DSR 2018 item NO- (18.65.)

Providing and fixing 600x450 mm bevelled edge mirror of superior quality) complete with 6 mm thick hard board ground fixed to woo C.P. brass screws and washers complete. As per DSR 2018 item NO- (17.31.)

Providing and fixing PTMT grating of approved quality and colour.Circular type.100 mm nominal dia. As per DSR 2018 item NO- (18.58.1.1.)

Providing and fixing ball valve (brass) of approved quality complete. High or low pressure with plastic floats. 20 mm nominal bore As per DSR 2018 item NO- (18.18.2.)

Providing and fixing ball valve (brass) of approved quality complete. High or low pressure with plastic floats. 25mm nominal bore As per DSR 2018 item NO- (18.18.3.)

Providing and fixing uplasticised PVC connection pipe with brass unions. 45 cm length. 15 mm nominal bore. As per DSR 2018 item NO- (18.21.2.1.)

P/F SIGN BOARD AS APPROVED DESIGN.

indian trading company

M/S PREETAM SHARMA

M/S KOKAB ENTERPRISES

INFINITY CONSTRUCTION