Renovation of Safaikaramchari qtrs. (04 nos.) near B No. 104 (2nd Phase)

Amount

Earth work in excavation in trenches n.exc. 1.5 M wide and 1.5M deep and getting out, returning filling in, including spreading & leveling in layers all as specified in MES SSR 2010.

M/L PCC bed 1:5:10 in fillings & Mass concrete all as specified in MES SSR 2010.

M/L brick work in cement mortar 1: 4 straight or curved on plan exe. 6m mean radius with sub class ‘A’ brick all as specified in MES SSR 2010.

Providing and laying autoclaved aerated cement blocks masonry with 150 mm/230mm/300mm thick AAC blocks in superstructure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-charge. (The payment of RCC band and reinforcement shall be made for separately).

S/F Reinforcement 8 mm dia & over cut to length bent to shape required size including cranking, bending & binding with M.S. annealed wire not less than 0.9 mm dia all as specified in MES SSR 2010.

Use & waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of Foundation and Plinth Beams and similar work; vertical or to batter fair finished surface all as sp.

Use & waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work 200 mm thick column, pillars, beams not exceeding 200 mm thick all as specified in MES SSR, 2010.

M/L RCC work 1:1½:3 for foundation including raft footing foundation beams plinths beams bases for columns basement slabs under reamed piles and mass concrete and the like all as specified in MES SSR, 2010.

M/L RCC work 1:1½:3 for slabs supported on walls, beams and columns in floors, roofs, landing balconies, canopies deck slabs, columns, pillars and in shelves and the like all as specified in MES SSR, 2010.

M/L sand filling under floors including watering & well ramming all as specified in MES SSR 2010.

M/L Rough flooring 25 mm thick in cement concert 1:2:4 for laying tiles all as specific in MES SSR 2010.

M/L PCC floor in cement concrete 1:2:4 fair finished even and smooth without using extra cement (flooring 40mm thick) all as specified in MES SSR 2010.

M/L PC plaster 12 mm thick in cement mortar 1:4, fair finished even and smooth without using extra cement all as specified in MES SSR, 2010.

M/L PC plaster 10 mm thick on ceiling in cement mortar 1:4, fair finished even and smooth without using extra cement all as specified in MES SSR, 2010.

M/L vitrified tiles of size 60cm x 60cm standerd thickness, in floor etc. ste and jointed in neat cement slurry and pointed in white or colored cement to match all as specified in MES SSR 2010 (including colored tiles & including screed 20mm).

M/L glazed ceramic tiles 300mm x 300mm, 400 mm x 400mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match all as specified in MES SSR, 2010 ( colored tiles) including screed 15-20 mm thick.

M/L glazed ceramic tiles 300 mm x 200mm or 300 mm x 300 mm x 7 mm thick etc. on walls set and jointed in neat cement slurry and pointed in white or colored cement to match all as specified in MES SSR,2010 (including colored tiles).

S/F of Marble work 18 to 20 mm thick (table rubbed and polished ) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types. (Excluding screed). (a) Makrana white/ Kishangarh etc. (b) Makrana Adanga

S/F rotational moulded polyethylene water storage tanks capacity 1000 ltrs.(cylindrical vertical with closed top) hoisted and fixed in position make sintex, diplast ploywell polycon all as sp. MES SSR 2010.

S/F of G.I pipe medium 15 mm dia galvanized, with all fitting and fixed complete to walls and ceilings or laid in floors all as sp. MES SSR 2010.

S/F framed work such as grills, grating, cattle traps etc., with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters, trusses, MS bar fencing, walk wais; railings; frame work of water tanks and similar work confirming to Fe 410-0 or Fe 310-0 all as specified in MES SSR, 2010.

S/F Aluminium Frame (color coated) Made of Aluminium rectangular section of 1.3 mm Thickness of size 2 ½” x 1 ½” Complete including fixing of 5 mm thick Glass Black/Brown complete all as specified in MES SSR 2010.

S/F 2nd class Hardwood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified in MES SSR, 2010.

S/F of 2nd class Hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. sizes of members of shutters all as specified in MES SSR,2010.

S/F of 2nd class Hard wood, plain framed & paneled factory made shutters (Two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (part-I ) kiln seasoned and chemically pressure treated all as specified in MES SSR,2010.

Providing & fixing 10-12 mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface (RCC ceiling surface) with design as per requirement and approved by the Engineer-in-charge all as specified in MES SSR, 2010

Putty filling two coats application of one coat of Primer followed by two coats of premium Acrylic emulsion such as Asian/Nerolac/Berger or equivalent followed by preparing existing surface to smooth Interior finish all as sp.

M/L Putty two coats than one coat of primer followed by super fine roller coat finish of spectrum or equivalent to be applied with foam Roller, Finally coated with two coat premium exterior emulsion/Apex or equivalent all as sp.

Applying evenly a tack coat of in dustrial bitumen 85/25 at rate of 1.2 kg per Sqm, Polythene film, black, 50 micron laid in floor, 80 mm thick average consolidated thickness mud phuska on flat roofs including 25 mm thick mud plaster and 3 mm thick leeping plaster and 40 mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud phuska all as specified in MES SSR, 2010.

Bidder Name

Amount

kulwant singh(GSTN-NA)

M/s A N BUILDERS(GSTN-NA)

swastik builders(GSTN-NA)

Mangal Construction Co.(GSTN-NA)

swastik builders

M/s A N BUILDERS

Mangal Construction Co.

kulwant singh

M/s A N BUILDERS

swastik builders