REPAIR REPLACEMENT AND MAINTENANCE OF EXTERNAL WATER SUPPLY IN OTM AND DISTRIBUTION LINE RISING SUPPLY LINE DOZING PLANTS SUBERMISIBLE PUMP SETS CENTRIFUGAL PUMP SETS STARTER PANELS CONTROLLING VALVES CLEANING OF SUMPS ETC AT MIL STN DHRANGADHRA

Amount

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth, for foundation, etc in hard/dense soil and getting out.

Returning, filling in, including spreading, leveling, watering and well ramming in layer not exc 25 cm with soil obtained from excavation all as specified and directed.

Removing excavated material (Soil) not exc 50 mtr and depositing where directed at a level not exc. 1.5 m above the starting point.

Taking down old unserviceable 100mm bore, CI water mains (including all fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed.

Taking down old unserviceable 150mm bore, CI water mains (including all fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed.

Taking down old unserviceable 200mm bore, CI water mains (including all fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed.

S&F, in replacement of cast iron sluice valve 150 mm dia with flanged ends class PN-1.6 with iron wheel, stainless steel spindle and check nut confirming to IS :780 including all jointing materials such as nuts, bolts, washers and gaskets etc. complete all as specified & directed .

S&F, in replacement of cast iron sluice valve 100 mm dia with flanged ends class PN-1.6 with iron wheel, stainless steel spindle and check nut confirming to IS :780 including all jointing materials such as nuts, bolts, washers and gaskets etc. complete all as specified & directed .

S&F, in replacement of cast iron sluice valve 80 mm dia with flanged ends class PN-1.6 with iron wheel, stainless steel spindle and check nut confirming to IS :780 including all jointing materials such as nuts, bolts, washers and gaskets etc. complete all as specified & directed .

Repair and servicing of sluice valve of 150mm incl renewal of perished rubber gasket, material washer,spindle, valves seating gland packing check nuts of gun metal, gun metal couplings washers, etc to make leak proof compleatly incl testing all as specified.

Repair and servicing of sluice valve of 100mm incl renewal of perished rubber gasket, material washer,spindle, valves seating gland packing check nuts of gun metal, gun metal couplings washers, etc to make leak proof compleatly incl testing all as specified.

Repair and servicing of sluice valve of 80mm incl renewal of perished rubber gasket, material washer,spindle, valves seating gland packing check nuts of gun metal, gun metal couplings washers, etc to make leak proof compleatly incl testing all as specified.

M&L in replacement of old unserviceable butterfly valve with stainless steel spindle , double flanged, with and including new flanged rubber joints using necessary nuts, bults, washer and rubber gasket etc incl testing on completion complete 100mm butterfly valve

S&F in replacement of 150mm bore, cast iron, reflux valve (non return valve) with flanged ended with rubber gasket and nut bolts complete all as specified and directed.

Supply and fixing of Ductile Iron pipe with spigot and socket ends, suitable for tyton joints, class K-9 laid in trenches, or under floors or fixed to walls, for following sizes are as under.

a) 200mm bore

b) 150mm bore

c) 100mm bore

Supply and fixing of Ductile Iron pipe 150mm with spigot and socket ends, suitable for tyton joints, class K-7 laid in trenches, or under floors or fixed to walls complete all as specified and directed.

Supply and fixing of Ductile Iron pipe 100mm with spigot and socket ends, suitable for tyton joints, class K-7 laid in trenches, or under floors or fixed to walls complete all as specified and directed.

Repairs / rewinding of centrifugal motor of cap 3 HP 3Phase, 415 Volt, by removing burnt winding and rewinding with super enamelled copper winding wire with same as existing turn & gauge to achieve desired including replacement of bearings complete and couple with the existing pump and testing complete as per directed by Engr-in-charge.

M&L for Terminal plate cover made of CI terminal plate for 60/120 HP centrifugal motor ,best quality including dismantling/taking out of unserviceable terminal plate of any make and type complete all as specified and directed

Attended the complaint of Star delta starter any type /make capacity 60 HP including replacement of U/S parts sch as over load relay/contracter/single phase preventer and wiring as required to made the starter serviceable condition (Note : Spare parts shall be measured and paid separatly )

Replacement of Sparekit unit for ML-4 contactor 66-110 Amps complete fixed in repairs all as specified and directed.

Replacement of Over load relay for ML-4 contactor of relay range 66-110 Amps complete fixed in repairs all as specified and directed.

Replacement of Timer switch unit star- delta starter 60 HP

M&L for Electronic motor protection relay to protect the motor against over load phase loss, phase unbalance, phase reversal and stalling in single compact unit with field sutaible time and current rating, suitable for 20 to 60 HP motors

DOL starter suitable for 3 HP to 7.5 HP electric motor, 3 phase, 415 volts, 50 c/s including dismantling/taking out of unserviceable starter of any make and type complete all as specified and directed

M&L for DI Specials and fittinng as per IS for spigot and socketed DI pipes for water mains, branches, links such as bends(any type), reducers and angles, tappers any type, bends increasing/ decreasing or double sockets etc. Tee pieces, single branches, double branches (all socket and spigots) collers, cap and plug suitable for pipelines upto 250 mm bore complete all as specified and directed.

Cleaning of Semi UG sumps by scraping the inner walls of sumps & cleaning with wire brush , taking out all dirt , scales etc and white washing the wall with two coats of lime after cleaning walls from inside by chlorine for disinfection including writing on UG Sump on black painted background with white paint the date of cleaning all as specified and directed by Engr-In-Charge or the capacities:-

a) 100000 Glns

b) 200000 Glns

c) 300000 Glns

Cleaning of Over head reservoirs of capacity 40,000 gallon 18 Mtr staging by scraping the inner walls of OHR & cleaning with wire brush, taking out all dirt, scales etc and white washing the wall with two coats of lime after cleaning walls from inside by chlorine for disinfection and including writing on tank on black painted background with white paint the date of cleaning all as specified and directed by Engr-In-Charge for the capacities:-

S&F in replacement of column pipe made out of GI heavy grade size 100mm bore of 3 Mtr length each, in single piece, having MS flanges welded to both ends and including rubber gasket 5mm thick with bolt nut/washers of appropirate size/length complete all as specified and directed.

S&F in replacement of column pipe made out of GI heavy grade size 80mm bore of 3 Mtr length each, in single piece, having MS flanges welded to both ends and including rubber gasket 5mm thick with bolt nut/washers of appropirate size/length complete all as specified and directed.

M&L for Lifting of UNSV submersible pump and motor (20 HP to 45 HP) complete set along with column pipe, safety rope and cable Approx 100 mtr depth with the help of employing chain pulley block and other T&P items all as specified and directed by Engr-in-Charge.

M&L for Lowering of submersible pump and motor (20 HP to 45 HP capacity) into 100 mtr deep bore well after connecting the cable and water proof cable joint and replacing of rubber gasket, nut and bolts and washers and fixing of protection clamp all as directed by Engr-in-Charge

M&L for disconecting the submersible electric motor of 45HP from pump set, cutting and taking out the existing burnt out winding wire and re-winding motor with 'F' class PVC insulated copper winding wire of appropriate existing gauge and weight, application of insulating material, varnishing the complete and sealing the motor with water proofing compound and sealing cap including comissioning and testing complete all as specified and directed. Note :- (i) Repair of submersible pump and pump motor will be measured & paid separately under respective item of this schedule. (ii) Quoted rate include transportation of pumpset from pump house to authorise workshop and back.

(i) M&L, in repair/replacement of motor shaft sleeve made out of stainless steel of existing size and length.

(ii) S&F in repair/replacement of thrust bearing of appropriate dia and size.

(iii) S&F in repair/replacement of coupling cage including bolt and nuts.

De-assembling the pump set of 45HP, Multistage (7-8) and replacing the following warn out parts by new parts & re-assembling the pump commissioning and testing complete all as specified and directed .Note :- (i) Repair of submersible pump and pump motor will be measured & paid separately under respective item of this schedule. (ii) Quoted rate include transportation of pumpset from pump house to authorise workshop and back.

(i) M&L in repair/replacement of intel ring

(ii) M&L in repair/replacement of Stainless Steel impeller

(iii) M&L in repair/replacement of pump shaft made out of stainless steel of existing size and length

(Iv) S&F in repair/replacement of coupling with rubber bushes, slot key, bolt and nuts.

(v) M&L in repair/replacement of pump sleeves SS

M&L for dismantling the submersible electric motor of 20HP from pump set, cutting and taking out the existing burnt out winding wire and re-winding motor with 'E' class PVC insulated copper winding wire of appropriate gauge, superior quality, application of insulating material, varnishing the complete and sealing the motor with water proofing compound and sealing cap including commissioning and testing all as specified and directed..Note :- (i) Repair of submersible pump and pump motor will be measured & paid separately under respective item of this schedule. (ii) Quoted rate include transportation of pumpset from pump house to authorise workshop and back.

(i) M&Lin repair/replacement of motor shaft sleeve made out of stainless steel of existing size and length.

(ii) S&Fin repair/replacement of thrust bearing of appropriate dia and size.

(iii) S&Fin repair/replacement of coupling cage including bolt and nuts.

De-assembling the pump set of 20HP, Multistage (7-8) and replacing the following warn out parts by new parts & re-assembling the pump commissioning and testing complete all as specified and directed.. Note :- (i) Repair of submersible pump and pump motor will be measured & paid separately under respective item of this schedule. (ii) Quoted rate include transportation of pumpset from pump house to authorise workshop and back.

(i) M&Lin repair/replacement of intel ring

(ii) M&Lin repair/replacement of Stainless Steel impeller

(iii) M&Lin repair/replacement of pump shaft made out of stainless steel of existing size and length

(iv) S&F, in repair, coupling with rubber bushes, slot key, bolt and nuts.

(v) M&Lin repair/replacement of pump sleeves SS

S&F in replacement of PVC insulated and PVC sheathed, Heavy duty, submersible flat cable of copper conductor, multi stranded, 3 core of size 25 Sqmm, 1100 volts grade. Make-Fnolex/Plaza/Havells.or equivalent

Dismantling of existing unserviceable motor of capacity 60 HP monoblock from foundation split opening in to the parts at works shop and repair the motor by rewinding of motor with copper winding wire of existing same gauge/size and weight supper enamelled winding wire by replacing paper insulation of class F and fire proof sleeves and varnishing by cleaning of stator slots assembling complete motor oiling and greasing and painting by synthetic enameled paints one coat after cleaning and preparing surface and testing complete at site on full load all as directed by Engr-in-charge Note: Quoted rate include transportation of pumpset from pump house to auth workshop and back.

Replacement of bearing suitable for 60 HP centrifugal Motor

Replacement of cooling Fan for motor suitable for 60 HP centrifugal Motor

Replacement of SS shaft Suitable for 60 HP centrifugal Motor

Dismantling of existing unserviceable pump of capacity 60 HP monoblock from foundation split opening in to the parts at works shop and repair the pump and greasing.gland packing and painting by synthetic enameled paints one coat after cleaning and preparing surface and testing complete at site on full load all as directed by Engr-in-charge Note: Quoted rate include transportation of pumpset from pump house to auth workshop and back.

Replacement of bearing suitable for 60 HP centrifugal pump sets

Replacement of Brass impeller suitable for 60 HP centrifugal pump sets

Replacement of Suitable bushes of 60 HP pump sets

Supply and replacement of Rubber coupling 60 HP pump sets

Supply and replacement of SS couppling 60 HP pump sets

Dismantling of existing unserviceable motor of capacity 20 HP monoblock from foundation split opening in to the parts at works shop and repair the motor by rewinding of motor with copper winding wire of existing same gauge/size and weight supper enamelled winding wire by replacing paper insulation of class F and fire proof sleeves and varnishing by cleaning of stator slots assembling complete motor oiling and greasing and painting by synthetic enameled paints one coat after cleaning and preparing surface and testing complete at site on full load all as directed by Engr-in-charge Note: Quoted rate include transportation of pumpset from pump house to auth workshop and back.

Replacement of bearing suitable for 20 HP centrifugal Motor

Replacement of Fan for motor suitable for 20 HP centrifugal Motor

Replacement of SS shaft Suitable for 20 HP centrifugal Motor

Dismantling of existing unserviceable pump of capacity 20 HP monoblock from foundation split opening in to the parts at works shop and repair the pump and greasing.gland packing and painting by synthetic enameled paints one coat after cleaning and preparing surface and testing complete at site on full load all as directed by Engr-in-charge Note: Quoted rate include transportation of pumpset from pump house to auth workshop and back.

Replacement of bearing suitable for 20 HP centrifugal pump sets

Replacement of Brass impeller suitable for 20 HP centrifugal pump sets

Replacement of Suitable bushes of 20 HP pump sets

Supply and replacement of Rubber coupling 20 HP pump sets

Supply and replacement of SS couppling 20 HP pump sets

Dismantling of existing unserviceable motor of capacity 5/7.5 HP monoblock from foundation split opening in to the parts at works shop and repair the motor by rewinding of motor with copper winding wire of existing same gauge/size and weight supper enamelled winding wire by replacing paper insulation of class F and fire proof sleeves and varnishing by cleaning of stator slots assembling, bearings, bushing,shaft repairing complete motor oiling and greasing and painting by synthetic enameled paints one coat after cleaning and preparing surface for painting and testing complete at site on full load all as directed by Engr-in-charge Note: Quoted rate include transportation of pumpset from pump house to auth workshop and back.

Attending complaint of decrine dozing plants replacement of defective parts re- installing, testing complete all as specified and directed by Engr-in charge (Note : Spare parts shall be measured and paid separatly )

Attending CI/DI pipe 80 mm to 200 mm dia pipe line break downs in Joint Leakage pipe broken ,flange leakage including necessary arrangement Lead joint,gascuts ,nuts and bolts , excavation and returning filling all as specified and directed:- Note: fittings and pipes measured for separatly

Material and labour for attending GI pipe 20 mm to 50 mm dia pipe line break downs in building/ground/terrace including necessary arrangement and safety measures minor repair/replacement of GI fittings such as union, nipple ,Elbow,socket Note: fittings cost shall be deemed in the quated rate .

Rewinding of decrine dozing motor repair/ rewinding exisiting 1/2/.5 Hp motors. super enamelled copper wire of existing gauge including disconnection of motor and reassembling after rewinding including varnishing, paper insulation and replacement of defective parts re- installing, testing & commissioning complete all as specified and directed by Engr-in charge

Supply for Rotor assembly with bearing brackets and tolerance rings suitable for Decreen dosing pump

Supply for Single head feed rate control with shaft

Supply for Injection check valve suitable for dosing pump fixed in repair all as specified

Supply for Duckwill suitable for dosing pump fixed in repair all as specified

Supply for Non return valve suitable for Decrin dosing pump

S&F in replacement of foot valve of size 150 mm incl necessary rubber, gasket, bolts, nuts and washer complete all as directed by Engr-in-charge.

S&F in replacement of foot valve of size 100 mm incl necessary rubber, gasket, bolts, nuts and washer complete all as directed by Engr-in-charge.

M&L for Contact set comprising of 03 Nos moving contacts & 06 Nos. fixed contacts suitable for Oil mimersed star- delta starter 30 HP to 60 HP fixed in repair complete all as specified and directed.

Cutting of Existing CI/DI pipe 80 mm to 200 mm dia pipe including fixing of Tees,Bends,Reducers,Sokets,Sluice valves and insertion of New DI/CI Pipes and fittings all as specified and directed:- Note: fittings, pipes and Excavation measured for separatly in respective schedule.

Supply "O" Todoline solution for water testing purpose in 500 ml bottle make Nice/Glaxo or existing make.

Supply only PPM test kit for water testing

Supply and fixing First AID Box Including all items for installation

M&L for cutting of Road/PCC path, hard standing depth not less than 60cm and width not less than 45cm for laying water supply pipe and making good the existing surface with PCC (1:2:4) type B-2 of 150mm thick complete all as specified and directed by Engr-in charge

M & L for preparation of old painted iron rolling setters/panels by synthetic enamel (ordenary tin) paint over finished surfaces including repair oiling & greasing of setters for smooth functioning.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate for foundation of poles etc

M&L for PCC 1:2:4 type C-2 using 20 mm graded stone aggregate for coping of poles etc

Taking out old un-serviceable GI pipes, laid in trenches or under floors or fixed to walls including all fittings and disconnecting from branch connections complete all as specified & directed, for following sizes:-

a) 50 mm dia bore

b) 40 mm dia bore

c) 25 mm dia bore

d) 20 mm dia bore

e) 15 mm dia bore

Supply and fixing in replacement of GI tubing, medium grade, ISI marked complete with all fittings, laid in trenches/floors GI pipes complete all as specified & directed, for the following size:-

a) 50 mm dia bore

b) 40 mm dia bore

c) 25 mm dia bore

d) 20 mm dia bore

e) 15 mm dia bore

Supply and fixing CI Detachable Joint compleate nut bolts with superior quality Rubber ring set for 200 mm CI Pipe/DI Pipe complete all as specified & directed.

Supply and fixing CI Detachable Joint compleate nut bolts with superior quality Rubber ring set for 150 mm CI Pipe/DI Pipe complete all as specified & directed.

Supply and fixing CI Detachable Joint compleate nut bolts with superior quality Rubber ring set for 100 mm CI Pipe/DI Pipe complete all as specified & directed.

Supply and fixing CI Detachable Joint compleate nut bolts with superior quality Rubber ring set for 80 mm CI Pipe/DI Pipe complete all as specified & directed.

M&L in replacement of Gun metal gate valve with iron wheel head, screwed both ends for iron pipe including testing suitable of following sizes:-

a) 50mm bore

b) 40mm bore

c) 25mm bore

d) 20mm bore

Demolition of existing valve pit and M&L for construction of valve pit consisisting of 230mm thick, old size brick masonry wall in cement mortar (1:6), PCC (1:4:8) type D2, using 40mm graded stone aggregete as in fondation, PCC (1:2:4) type B1, using 20mm graded stone aggregete in coping/bed, finished even and smooth, rendering 15mm thick in cement mortar (1:6) internally and 10mm thick in cement mortar (1:4) externally, finished even and smooth without using extra cement incuding three coats of white wash and earth work in any type of soil and including 3mm thick MS sheet cover fixed on 40mmx40mmx6mm thick angle iron frame ambeded in PCC coping with locking arrangement and mild steel hold fast & handle and duly painted with two coats of synthetic enamel paint over one coat of primer etc.

(a) 1200mm x 1000mm x 1000mm

(b) 1000mm x 900mm x 900mm

M&L for Drilling and tapping cast iron/DI water main ( in position ) for branch connection of 15 mm bore

M&L for Drilling and tapping cast iron/DI water main ( in position ) for branch connection of 20 mm bore

Shivaang Enterprise (BID ID -3362287)

ALBA AC AND REF SERVICES (BID ID -3354308)