Annual contract for day to day petty repair civil works in estate area at O.F. Bhandara.

Amount

Excavation in trenches for repair of water line, sewage line, foundation etc in hard dense soil/ mud/any condition not exceeding 0.5 Cum.

Material and labour for rendering patch work plaster in wall ceiling, floor etc not exceeding 0.5 Sqm in cement mortar 1:4 of 15mm thickness, including all taking down old plaster, cleaning and fair finishing the surface etc. complete.

Material and labours for repairs to WC trap by replacing trap by taking down the old trap and fixing in position the new trap including all finishing work required.

Repairs to down take Pipe at any location by bandage at joint by cement bandage make leak proof etc in Each joint.

Material and labour for replacement of Soil, Waste and drainage pipes with PVC (SWR) Pipe 3m length and 110 mm diameter single socketed with rubber ring joints of by taking down the existing old pipe and fixing with all accessories like clamps, nails & screws including making joint with old pipes etc complete.make supreeme,finolex,surya or equivalent make.

Material and labour for replacement of Indian water closet (IWC) Orissa pattern / European water/Comode closet (EWC) size 630x450mm with all accessories such as trap connection with flushing cistern above or below ground level by taking down old WC and finish the floor surface as it is with gray or colour cement to match with existing floor etc complete. Make of WC pan: Hindustan,Parryware, Hindware, Cera, Johnson or equivalent make.

S & F vitreous China Urinal, bowltype, white, (excluding flushing cistern, flush pipe and waste pipe), fixing in new work or refixing in old work including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing with brackets, flush pipe, grating and union for discharge pipe (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed by the Engineer-in-Charge Make Hindustan,Parryware, Hindware, Cera, Johnson or equivalent make.

Material and labour for laying Salt glazed stoneware drain pipes line patch work of 2.0 meter length and 150mm Diameter including digging laying in trenches and making joint with old existing pipe line/ceiling of joint etc complete.

Material and labour for Brick work in sub class B-brick of 230mm thickness built in cement mortar 1:6 for patch repair work in old walls of size not exceeding 0.10 Cum including making joint with old walls etc complete.

Material and Labour for Brick work with sub class B- Brick work in half brick thick wall in cement mortar 1:4 for patch repair work in old walls of size not exceeding 1.0 Sqm including making joint with old walls etc complete make.

M & L for RCC 1:2:4 type B1 using 20mm graded aggregate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete not exceeding 0.1 Cum with reinforcement 10Kg. and form work in patch repair work including matching the existing work complete all as specified and as directed by the Engineer-in-Charge.

M & L for PCC 1:2:4 Type B2 40mm graded aggregate as in foundations, filling and mass concrete not exceeding 0.10 Cum in patch repair work including matching the existing work complete all as specified and as directed by the EIC.

Material and labour for laying Cement concrete 1:2:4, in floors of 55mm thickness using aggregate up to 20mm grade with smooth finish not exceeding 0.5 Sqm in patch repair work including matching the existing floor etc complete.

Material and labour for replacing asbestos cement sheet ISI marked, corrugated or semi corrugated in roof walls patch work exc 1.5 sqm but not exceeding 3.0 Sqm including taking down old sheets and fixing new sheets with L or J bolt and proper fixing in groove and cementing as required.

Materail and labour for applying water proofing treatment with DR. FIXIT NEWCOAT (microfibre reinforforced acrylic based flexible coating 1mm thick) over roof, ceiling joints , chajjas, walls not exceeding 1.0 Sqm. Including wire brushing,cleaning top surface of tiles, lime terracing, cement concreting, flushing of junction of parapet and surface painting with a three coats of DR. FIXIT NEWCOAT or equivalent make.

Repairs to existing WC P-trap or S-Trap ISI marked by removing the existing damage trap including cementing and sealing the WC trap to prevent leakage/ seepage from WC sheet etc complete.

Supply and fixing bathroom trap grating Stainless steel ISI marked not exceeding 0.15 m diameter etc complete.

Supply and fixing pre-cast man hole cover slab of 75mm thick not exceeding 0.50 Sqm in RCC, B-1 1:2:4, 20mm aggregate reinforced with 8mm dia MS bars at 150mm c/c with handles including fixing where required etc complete.

Repairs to Wash down water closet (WC) Indian/ European by cementing patchwork etc complete.

Supply and fixing PVC (SWR) junction like Tee, socket, Y junction up to 110mm diameter fixing in any position by taking down existing fittings including making water tight joint with old pipes etc complete.make supreeme,finolex,surya or equivalent make

Supply and fixing PVC (SWR) plain Bend up to 110mm diameter of any radius by taking down existing fittings and fixing where required making watertight joint with old pipes etc complete.make supreeme,finolex,surya or equivalent make.

Supply and fixing in position PVC sheet cover for European WC with clamping arrangement & jet with all connections etc complete.Hindustan,Parryware, Hindware, Cera, Johnson or equivalent make.

M & L for Non-Skid coloured joint free non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement over screed bed or bedding layer 25mm thick in CM 1:4 for laying tiles, area not exceeding 1.50 sqm. complete all as specified and as directed by the Engineer-in-Charge make -kajaria,somany or equivalent make.

M & L for Glazed Coloured Ceramic joint free tiles in vertical surface 350x250x7mm / 450x350x7mm thick set and joint in neat cement slury and pointed in white or colour cement to matched, including taking down broken tile/ plaster and rendering 20mm thick plaster on brick or concrete surface to receive tile, total area n.exc. 1.0 sqm. complete all as specified and as directed by the EIC.kajaria,somany or equivalent make.

M & L for 30mm thick screed bed or bedding layer in CM 1:4 for laying glazed tiles in floors area n. exc. 5.0 sqm etc. complete all as specified and as directed by the Engineer-in-Charge

M & L for Vitrified ceramic tiles 10mm thick (square/rectangular) polished in any position, area of each tiles not exceeding 0.36sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match area n.exc. 5.0 sqm.kajaria,somany or equivalent make.

M&L for proper cleaning by wire brush ,applying surface bitumin polymer Ready mixed special grade asphault (self bonding) pre mixed using 25 kg at a time with special aggregate and chemical with pressure sensitive polymer for pavement surface/pot holes, by cold application /dry weather prefferable .with expiry & manufacture date marked.all as specified

Supply and fixing sheet glass ordinary quality and glazing with rubber beeding in square 3.5-4mm thick glass Plain/ tinted with beading/ glass putty/ panel pin area exceeding .75sqm each pane by taking down/ hacking out old/ broken glass

Supply and fixing sheet glass ordinary quality and glazing with oil putty in square in 3mm thick glass Plain/ tinted with beading/ glass putty/ panel pin by taking down old glass and fixed in any position any situation not exceeding 0.25 Sqm each pane.

Supply and fixing Stainless steel wire cloths, 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixing in any position etc with stainless steel wire staples, beading etc complete not exceeding size 1 Sqm each.

Supply and fixing butt hinges heavy weight, cold rolled Hinges MS size up to 100mm fixing in any position each including removing old hinges.

Supply and fixing Mild steel pressed handles oval type, bright polished Handles MS of size up to 150mm fixing in any position each.

Supply and fixing mild steel barrel Tower bolt stove enamel black with bright bolt and fixing in position up to 150mm length fixing in any position each.

Supply and fixing Hasp and Staple up to 150mm length fixing in any position each.

Supply and fixing mild steel sliding door Locking bolt up to 300mm length plate type bright polished with bright bolt not less than 12mm dia length fixing in any position each.

Supply and fixing ISI marked Plywood BWR 12mm thick not exceeding size 0.5 Sqm each including Priming and applying 2 coats of synthetic enamel paint etc complete.

Painting to wood and wood based surface of any description to Doors and window priming and apply 2 coats of synthetic enamel paint not exceeding size 2.0 Sqm each.

Repairs to chowkats or frames of doors/ window with wire nails, scrapping, pinning, screwing wooden frame etc. with out taking down shutters each frame exceeding 1.5 Sqm each.

Repairs to doors/ window shutters re-securing or easing and adjusting with or with out taking down same opening etc exceeding 2.0 Sqm with wire nails, scrapping pining, screwing, wooden battens as required etc. with out taking down each shutters.

S&F for anodised aluminium window and ventilator shutters, side hung/ slidding type with out sash, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitting such as peg steys 150mm long (1no.) hinges type B-21 100mm long (2no.) suitable handle (1no.) area n.exc. 0.75 sqm. complete all as specified.

Supply and fixing Rotational molded polyethylene water storage tank cylindrical 500 liters capacity each fixed in position by taking down existing tank at any location and connecting tank with all required accessories etc complete. Make of tank: SINTEX/TATA/PLASTO or equivalent make..

Supply and fixing Bib tap standard of PTMT ISI marked any colour 15mm dia and minimum weight 90 gms each, screwed for iron pipe with all accessories.Make prayag or equivalent make.

Supply and fixing medium grade G.I. water line 15mm dia up to 1.0m each at wall, ceiling and floor or laying in trenches with taking down old pipes and making all joints water tight etc complete. Make of pipe: TATA/Prakash Surya or equivalent make.

Supply and fixing medium grade G.I. water line 20mm dia up to 1.0m each at wall, ceiling and floor or laying in trenches with taking down old pipes and making all joints water tight etc complete. Make of pipe: TATA/Prakash Surya or equivalent make.

Supply and fixing pillar cock ISI marked to wash basin/ sink, cast copper alloy, chromium plated, 15mm bore and weight not less than 400gm each with all accessories etc. complete.

Supply and fixing vitreous china wash basin/ sink size 630mmx450mm excluding taps waste chain plug porcelain stopper including brackets(CI) medium size including all accessories 50mm required etc. complete.Hindustan,Parryware, Hindware, Cera, Johnson.nirali, prayag,blue star or equivalent make.

Supply and fixing PVC. Connection pipe 15mm bore dia and length up to 600mm for washbasin, sink, flush tanks, urinals with all accessories etc. complete.

Supply and fixing waste fitting, brass, chromium plated for glazed ware sinks, basin etc with long screwed shanks and fly nuts and PVC waste pipes 40mm etc. complete.

Supply and fixing PVC waste pipe up to 40mm dia connected to sinks, basins up to 1.5m etc. complete.

Supply and fixing of Healt Fusset for Commode of WC with all accessories and Fittings on walls johnson,prayag,hindware or equivalent make. etc. complete.

Supply and fixing 15 mm dia Stop Valve, cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipes for unions and fixing weight not less than 400Gms etc. complete.

Supply and fixing gunmetal wheel valve 20mm dia to discard the existing flushing cistern including connecting medium grade GI. Pipe 20mm dia up to 3.0 m length for making connection to WC with all required accessories like bend, unions to, including taking down old flushing cistern and making the good to floor/wall etc complete.

S&F ONLY fancy Mortice lock of brass,vertical type,with two leveres size100 mm & taking down of old lock

S&F for wall mirror 600 mm x 450 mm x 6 mm thick bevelled edge of slelcted quality glass mounted on 4mm thick AC building board or commercial plywood and fixe to wooden plugs or connecting eye for fixing on wall with suitable aluminium frame.

S & F heavy weight fancy bib cock / stop cock/ pillar cock/Mixer of Stainless steel body with crhomium plated of 15 mm to 20 mm dia , Make jaquar, Cera, Johnson,Parryware or equivalent make.

Supply and fixing Curtain Rails Harrison rails, mild steel, and chromium plated with fixing brackets stop rollers etc. Up to 1.50 Meter length each.

Supply and fixing Low down PVC Flushing cistern capacity 10 liters with stopcock. PVC connection pipe and all accessories etc. complete. Make of flush:Parryware Slim Line (Code C8090), Hindware, Cera, Johnson or equivalent make.

Supply and fixing Stop valve of PTMT any colour 15mm dia and minimum weight 90 gms each, high pressure screwed for iron pipe and fixed etc complete.Make prayag or equivalent make.

Supply and fixing to OHT PTMT ball valve ISI marked 15mm dia and minimum weight 142 gms, high pressure with epoxy coated aluminium rod, high density polyethylene float, fly nut complete including all accessories etc. complete.Make prayag or equivalent make

Supply and fixing to OHT PTMT ball valve ISI marked 20mm dia and minimum weight 210 gms, high pressure with epoxy coated aluminium rod, high density polyethylene float, fly nut complete including all accessories etc. complete.Make prayag or equivalent make.

Supply and fixing Chromium plated Shower rose ISI marked up to 150mm dia fixing with all accessories etc. complete.

Removing water meters for testing etc by unscewing unions fitting unions with screw, plug for inserting length pipe or tubing scew both ends so as to maintain supply water including all fittings for direct connection in 15 to 20mm dia pipilines etc complete.

Repairs to Bib tap/ pillar tap / stopcock 15 to 20mm dia by replacing PVC washer, damaged spindles, fly nuts and minor repairs etc. complete each.

Repairs to GI. Waterline 15mm to 20mm by taking down, necessary cleaning, threading and re-fixing with all clamping arrangement up to 1.0m. length with all accessories each.

Restoring of watersupply from Over head tank to quarters by taking down pipes, cleaning of pipes and re-fixing the same etc complete.

Repairs to high/low level Flushing cistern CI/PVC, setting flow ball cock etc. complete with all accessories like couplings, bends, Tee couplings,lever.

Repairs to overhead tank by providing washer in existing float valve, float ball, float valve parts and making minor adjustment to avoid leakages from OHT complete.

Cutting hole into or through brick wall, stone walls built in cement mortar 25 cm depth superficail area exe 150 sq.c but n.exe 400 sq.cm and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B 1 as required.

Supply and fixing PVC overhead tank cover with clip and fixing arrangement at any floor etc complete.

Supply and fixing washer to pillar cock/bib cock/stop cock 15 to 20mm dia each.

S & F in repair ISI marked mild steel rolled sections of weight n.exc. 10kg as in main and cross beams, hip and jack rafters; purlins, wind tie where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, quality confirming to Fe-410-W (GDE-E-250) quality-B and ,complete all as specified and as directed by the E-I-C.

S & F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa, area n.exc. 3.0 sqm. as in roof covering/cladding to wall, fixed with self tapping screws all as specified.

Dismantling fencing wire mesh, any type & Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire, area not exc. 4 sqm complete all as specified and as directed by the Engineer-in-Charge

Welding in repairs in MS exc. 2.5cm but n exc. 5 cm in length. Thickness of metal to be welded exc 9mm but n exc 20 mm.complete all as specified and as directed by the Engineer-in-Charge

welding in repairs in SS exc. 2.5cm but n exc. 5 cm in length.

DARSHAN SINGH PLAHA