Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.3 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹16.3 L+₹3.0 L (22.6%)Rejected-Finance | L2 | Rejected-Finance Not Lowest Bidder |
Tender Value
₹13.6 L
EMD Value
₹27,240
Closing Date
4 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer, Banar
Garrison Engineer, Banar, Jodhpur-342027
PROVISION OF 01X TOILET CUM BATHROOM AT EACH PERIMETER GD POST NO 31, 36 AND 38 OF 19 FAD AT BANAR IN ARMY AREA JODHPUR
2022_MES_525028_2
8822/04/E8
Open Tender
Civil Works
Item Rate
180 days
Banar
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Garrison Engineer, Banar
₹27,240
Yes
13 Aug 2022
7 Jul 2022
6 Aug 2022
7 Jul 2022
4 Aug 2022
21 Jul 2022
Amount
BUILDING WORKS : Surface excavation n. exc 30cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified.
Excavation in trenches n exc 1.50m wide, n exc 1.50m in depth for foundation etc n exc 10 sqm on plan and getting out for in any type of soill complete all as specified.
M&L PCC 1:4:8 type D2 (using 40mm graded agg) as in foundation filling and mass concrete etc complete all as specified.
M&L for square rubble walling , Jodhpur type regular coursed , well bonded bedded and solidly hearted built in CM (1:6 ) complete all as specified.
M&L for Pre-cast cement concrete type B1 1:2:4 (20mm graded aggregate) concrete block masonry with solid blocks 10 cm thick (with plain or interlocking joints as directed) and setting in mortar 1:6 complete all as specified.
M&L for RCC M-25 for plinth beams; bases for columns, etc.; basement slabs and mass concrete complete all as specified.
M&L for RCC M-25 for lintel beams, roof beams cantilevers, bressummers, lintels over 1.5m span complete all as specified.
M&L for RCC M-25 for Chajjas complete all as specified.
M&L for RCC M-25 for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies and in shelves and the like complete all as specified.
M & L for precast cement concrete, Type B0 (1:2:4) set in CM 1:4 louvres and jallies, 25mm thick (measured solid), including all mouldings complete all as specified.
M&L to Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide rough finished flat surfaces of concrete complete all as specified.
M&L to Formwork to fins, louvers, fascia/chajja etc. rough finished flat surfaces of concrete complete all as specified.
M&L to Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick (Horizontal or sloping) rough finished flat surfaces of concrete complete all as specified.
M&L reinforcement TMT bars 10mm dia and over cut to length bent to shape required incl cranking bending spirally for hooping staps/lintals and including mild steel wire not less than 0.9mm dia or securing with clips complete all as specified.
.-ditto- all as per item No 14 above but 6mm to 8mm dia complete all as specified.
.-ditto- all as per item No 14 above but 6mm to 8mm dia and over stirrups, spaces and binders complete all as specified.
Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm of hard/dense soil complete all as specified.
Removing excavated material of soil n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified.
Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints , as specified of squared rubble walling , regular coursed with maximum depression on face stone straight held the againest the dressed surface n'exc 20 mm complete all as specified.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 is to be finished even and smooth (without using extra cement) complete all as specified.
M&L for Keyed pointing in CM 1:3 to squared rubble, coursed or uncoursed stone masonry complete all as specified.
M&L for rendering 5 mm thick on ceiling of brick work or concrete surfaces in CM 1:3 complete all as specified.
M&L for rendering screed bed or bedding layer of mortar 20 mm thick in CM 1:3 as in floor to be finished smooth without using extra cement mixed with water proofing compound as per manufacturer instruction complete all as specified and directed.
M&L for Neeru finish to plastering complete all as specified
Supply for liquid water proofing compound for external surfaces 200ml for 50 Kg bag of cement complete all as specified.
M&L for preparation of new plastered surface and applying two coat of cement base paint externally complete all as specified.
M&L for preparation of new plastered surface and applying three coat of white wash on wall internally complete all as specified.
M&L for preparation of new plastered surface and applying three coat of white wash on ceiling complete all as specified.
M&L for moorum/red bajri filling in floors or pavings, spreading and levelling in layers and well ramming including watering as required complete all as specified.
M&L for cement concrete 100mm thick Type D2 1:4:8 (40mm graded aggregate) as in flooring complete all as specified.
M&L for cement concrete 25 mm thick Type B-0 1:2:4 (12.5 mm graded aggregate) as in floorcomplete all as specified.
M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc over screed bed or bedding layer of CM 1:6 in 15 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.
M&L for coloured glazed ceramic tiles in vertical surface dedos and skirting etc 300 x 200 x 7mm thick over 10 mm thick rendering CM 1:4 set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified.
M&L for 75mm thick hardcore broken stone or boulders of gauge exc 63 mm deposited, spread and levelled in layers, watered and rammed to a true surface as in plinth protection complete all as specified.
M&L for 75mm thick PCC 1:3:6 type C2 (using 40mm graded aggregate) and finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as specified.
S&F solid PVC door frame(chowkat) of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube etc complete all as specified.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top& bottom rails. Ms MS frame shall be covered with heat moulded plain colour PVC C Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail& bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with suitable PVC sheet beading and joined together with solvent cement, etc fixed to frame complete all as spd and directed.
S&F steel ventilator with top hung shutter including hinges steel peg stay complete all as specified.
M&L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink preimer complete all as specified.
S&F for 3 mm thick figure glass glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified.
S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified.
S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, and fixed, type C-21 complete all as specified.
S&F 100 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified.
S&F 125mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified.
M&L for 20 mm dia of bore Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.
M&L for 15 mm dia of bore Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.
S&F for vitreous china bowl urinal flat back, size 465x355x265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified.
S&F for vitreous china wash basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified.
S&F for vitreous China squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified.
M&L for PVC valveless, syphonic action type, flushing cistern, 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets and including flushing pipe 32 mm dia of bore, high density polyethylene pipes of pressure rating 6 kgf/sqcm complete all as specified.
S&F PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified.
S&F for rotational moulded polyethylene water storage tanks capacity 1000 liters (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified.
S&F for 20mm dia ball Ball valves high pressure of PTMT with Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 m m - 210 gms complete all as specified.
S&F for 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified.
S & F soap dish, viterous china size 160x160x90 mm fixed to plugs with choromium plated screws complete all as specified
S&F for 15mm dia of bore stop valves/angle cock, fancy type, chromium plated, screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified.
S&F for 15mm dia of bore Bib taps, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified.
S&F for 15mm dia of bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, fency type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified.
M&L for Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (Minimum weight 60gms) complete all as specified.
S&F for 32 mm bore Waste coupling of PTMT (half full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified.
S&F PVC waste pipe 32mm dia complete all as specifed.
S&F Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) complete all as specified.
S&F brass chromium plated Tubular towel rail, 20 mm dia, D type, 60cm long between flanges all as specified.
M&L for 110mm bore PVC (SWR) `P' trap complete all as specified.
M&L for 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified.
M&L for 110mm bore PVC (SWR) pipes, single socketed, in any length, with rubber rings joints, laid in trenches or in floors completed all as specified.
M&L for 75 mm bore PVC (SWR) pipes, single socketed, in any length, with rubber rings joints, laid in trenches or in floors completed all as specified.
M&L for 110 mm bore PVC (SWR) bends any radius complete all as specified.
M&L for 75 mm borePVC (SWR) bends any radius complete all as specified.
M&L for 75 mm dia of bore PVC (SWR) floor trap plain with grating/ grating doom including jointing with solvent cement complete all as specified.
M&L for 110mm PVC (SWR) reducers complete all as specified.
M&L for 75mm dia PVC (SWR) vent cowl complete all as specified.
SEWAGE DISPOSAL WORKs : Excavation in trenches n.exc 1.5M in depth and 1.5M wide including getting out in any type of soil complete all as specified.
Returning, filling in including spreading, levelling watering and well ramming in layers n. exc. 25 cm in soil.complete all as specified.
Removing excavated soil to a distance n. exc. 50 meter and deposited where directed at a level n. exc. 1.5 meter above the starting point. complete all as specified.
M&L plain Cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone agg) as in in foundations, filling and mass concete complete all as specified.
M&L PCC 1:2:4 type B-1 ( 20mm graded crushed stone agg.) as in benching, coping and similar work as like including weathering, slightly rounded or chamfered angle and throating.
M&L Cement concrete 1:4:8 type D-2 (using 40mm graded agg.) as in concrete bed to drain pipe including packing under and hunching against the sides of pipe after they are laid and tested for 150mm dia SGSW pipe complete all as specified.
M&L 150 mm dia reindorced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified.
M&L for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:6 ,Type C1 1:3:6 (20mm graded aggregate complete all as specified.
M&L for Cement concrete Type C2 1:3:6 (20 mm graded aggregate) in surface channels , drains and benching including finishing the top of benching even and smooth using extra cement complete all as specified.
M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc.completed all as specified.
Add or deduct for Ser Item No. 83.00 above for each 25 mm girth or part thereof over or under 30cm ditto
M&L Precast reinforced cement concrete 1:2:4 type B-1 (20mm graded agg.) as in landing, cover slabs for manholes etc set in CM 1:6 complete all as specified.
M&L Mild steel TMT bar upto 10mm dia cut to length bent to shape required, including cranking bending spirally and binding with and including mild steel sire (annealed) not less than 0.9mm dia all as specified.
M&L for 15mm thick rendering in CM 1:4 on brick or concrete surface with mixed with water proofing compound as per manufacturer instruction complete all as specified and directed. cement finished fair complete all as specified and directed. Note : Water proofing compound will be measured and paid seperately under respective item of Sch ‘A’.
Supply only for liquid water proofing compound for external surfaces 200ml for 50 Kg bag of cement complete all as specified and directed.
M&L for provision of RCC Septic tanks conventional type designed to carry sewage and sullage water excavation in any type of soil ,PCC 1:4:8 below foundation, RCC M 30 design mix in walls,base slab and roof slab including beams etc with Vent shaft ,manhole opening with cover connection etc., complete with effective depth of 1.5 mtr and overall depth of 3 mtr for 5 users complete all as specified.
M&L for construction of Soakage wells, excavation in any type of soil, foundation in PCC 1:3:6 , walls of honey combed masonary with top ring of M-25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M 25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 2.4 M internal dia X 3.0M effective depth. Note:- Drg No CEBZ/TD/76/2011 Sheet No 1/1 dt 01 Aug 2011 shall be followed for reference.
PATH AND HARD STANDING WORKS : Surface excavation n. exc 30cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified.
Removing excavated material of soil n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified.
M&L for 75 mm thick hardcore broken stone or boulders of gauge exc 63 mm deposited, spread and levelled in layers, watered and rammed to a true surface as in plinth protection complete all as specified.
M&L for 75 mm thick PCC 1:3:6 type C2 (using 40mm graded aggregate) as in sub base of floor a complete all as specified.
M&L for Sand filling under floor including watering and consolidation 25 mm thick complete all as specified.
M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness, M 35 grade with white cement glossiness in pigments and laid in position/pattern all as approved and directed by Engineer-in-Charge.
M&L PCC (1:2:4) type B1 using 20mm graded stone agg as in coppings, benching, kerbs, edges, toe wall etc including necessary form work complete all as specified.
INTERNAL ELECTRIFICATION WORKS : M&L for point wiring of any length using approved colour coding as per IS, with stranded copper conductor 1.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked, in PVC rigid conduits heavy duty ISI marked totally concealed in wall/floor/roof including all accessories etc. with 2 mm thick sunken boxes including 3mm thick laminated sheet cover suitable for mounting switches/sockets etc. and PVC insulated stranded copper conductor 1.5 Sq.mm single core cable as earth and connecting to common earth dolly complete all as specified for the following:-Note- (i) Cutting in chases and pointing in will be done by contractor without any cost. (ii) Making good of distrubed surfaces matching with existing finishes will be done by contractor without any extra cost .
One light point controlled by one, One-way switch complete all as specified.
One fan/Exhaust fan point controlled by one, One-way switch complete all as specified.
One 5 pin 5Amp Socket outlet point on same board with other switches including earth wire.
All as per item no. 98.00 above but with 4 Sq.mm(Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked, including PVC insulated stranded copper conductor 4 Sqmm single core cable as earth and connecting to common earth dolly complete all as specified for one 15 amps socket outlet point on independent board.
S & F piano flush type 5 Amps single pole switch complete all as specified.
S & F multipurpose socket outlet with piano flush type 3 pin 5 Amps all as specified.
S & F switch socket combination 3 pin 16 Amp flush type complete all as specified.
S&F ceiling rose surface type three terminals complete all as specified.
Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified.
Supply and fixing LED based security light 35 W in aluminium pressure die cast housing with touched glass cover having IP 66 Protection and with aluminium bracket including nut and bolts complete all as directed by Engineer-in-charge.
Supply and fix Heavy duty Metal body exhaust fan 300 mm sweep, including louvers grounting with nut bolts complete all as specified.
S&F MCB SPN DB 4 way, double door, with 200 amp rated busbar 240 V, all as specified.
S & F for MCB Single pole rated capacity 6 to 32 amps, 240 V breaking capacity 10 KA ,C- curve complete all as specified.
EXTERNAL ELECTRIFICATION WORKS : Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr deep and getting out any type of soil all as specified.
Returining, filling in including spreading, levelling watering and well ramming in layer not exce 25 cm, all as specified.
Removing excavated material to a distance not exce 50 mtr and deposited where directed at a level not exceding 1.5 mtr abvoe the starting point all as specified.
M&L for clean, dry tibba sand in trenches/ducts for cushioning to cable complete all as specified.
M&L for Jodhpur stone patti slab cover 25cm to 30cm in width, 60cm long and 40 to 50mm thick laid in trenches for cable protection complete all as specified.
Supply laying and testing cable XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with standed allumiuium conductor of size 10 sqmm 2 core complete all as specified.
EXTERNAL WATER SUPPLY WORKS : Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr deep and getting out any type of soil all as specified and directed.
Returining, filling in including spreading, levelling watering and well ramming in layer not exce 25 cm, all as specified and directed.
Removing excavated material to a distance not exce 50 mtr and deposited where directed at a level not exceding 1.5 mtr abvoe the starting point all as specified.
Drilling of hole for taping points from water pipe line of any type and size and type for connection of 25/20 mm GI pipe with clamp and other accessories complete all as specified.
Supply and laying 25mm bore GI tubing medium grade with all fittings(ISI Marked) and fixed complete laid in trenches/fixed to walls (including clamps)/fixed on pillars etc complete all as specified.
Supply and laying 20mm bore GI tubing medium grade with all fittings(ISI Marked) and fixed complete laid in trenches/fixed to walls (including clamps)/fixed on pillars etc complete all as specified.
Supply and fixing 25mm bore Gun metal Globe or Gate valve with iron wheel head, screwed both ends for iron pipe, non rising forged brass spindle class I and fixed with required necessary GI fittings complete all as specified.
M/S PIYUSH CONSTRUCTION COMPANY
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .