BID DOCUMENTS FOR CONSTRUCTION OF COMPOUND WALL AT PIJ ROAD WALK WAY AT NADIAD FOR NADIAD MUNICIPAL CORPORATION, NADIAD, DIST.: KHEDA

Total Amount Rs.

Sr. No. Description Qty Unit Rate Amount

Demolition of Brick work and stone masonry including stacking of serviceable

1 materilas and disposal of unserviceable materials with all lead and lift.(ii) In Cement 467.60 Cu.M. 536.09

Dismentling barbed / chainlink wire in fencing including making rolls and also including

dismentling fencing posts including all earth work concrete in base and making good

2 the disturbed ground stacking useful materials as directed and disposing as directed 960.00 R.Mt. 64.91

and disposing of the unserviceable materials with all lead and lift

Excavation for foundation upto 1.5M depth including sorting out and stacking of useful

3 materials and disposing of the excavated stuff with all Lead. 1782.06 Cu.M. 117.08

Loose or Soft Soil.

Providing and laying cement concrete 1:3:6 ( 1: Cement : 3- Coarse Sand : 6- hand

broken stone aggregates 40mm nominal size) and curing complete excluding cost of

4 formwork in 165.77 Cu.M. 3005.76

(A) Foundation & Plinth

Providing and laying cement concrete M250 and curing complete including the cost of

5 formwork and reinforcement for reinforced concrete work in 289.58 Cu.M. 4466.21

( A ) Foundation, footing, Base of Columns and mass concrete

Providing and laying controlled cement concrete M250 and curing complete including

the cost of formwork and reinforcement for reinforced concrete work in

Providing and laying cement concrete M250 and curing complete including the cost of

formwork but excluding reinforcement for reinforced concrete work in

( c ) Lintel ,Beams, upto two floor level.

Brickwork using common burnt clay building bricks having crushing strength not less

than 35kg/Sq.cm. In foundation and plinth in Cement mortar 1:6 ( 1-Cement :6- Fine

(B) Conventional

Extra for brickwork in super structure above floor two level

Filling available excavated earth ( excluding rock ) in trenches, plinth, sides of

9 foundation etc. in layers not exceeding 20cm in depth consolidating each deposited 1782.06 Cu.M. 130.40

layer by ramming and watering.

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding

10 and placing in position complete upto floor two level 59457.40 Kg 76.22

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or

11 half brick walls for interior plastering upto floor two level and finished even and 4216.60 Sq.M. 194.07

smooth in (i) Cement mortar 1:3 (1-cement:3-sand)

Providing and fixing M.S. grills of required pattern to wooden frame of windows with

M. S. flat at required spacing & frame alround, square or round bars with round bars

12 with round headed bolts and nuts or by screws. 30588.00 Kg. 101.18

Painting Three coats ( including One Coat priming coat & Two Coat enamal Paint) on

new steel and other metal surface with snthetic enamel paint ,brushing to give an

13 even shade including cleaning surface of all dirt, dust and other foreign matter. 1185.12 Sq.M. 100.48

NADIAD MUNICIPAL CORPORATION

DISTRICT :- KHEDA

BID DOCUMENTS FOR CONSTRUCTION OF COMPOUND WALL AT PIJ ROAD WALK WAY AT NADIAD FOR NADIAD MUNICIPAL CORPORATION, NADIAD,

Sr. No. Description Qty Unit Rate Amount

Providing and fixing brick cladding using approved quality facing bricks of specified

size, shape, color, and texture, fixed to walls or surfaces, using suitable adhesive,

alignment, leveling, maintaining uniform joints, pointing with approved grout and

finishing to achieve a neat and uniform appearance. including scaffolding, curing, etc.

Complete as per Instruction of Engineer in-charge

Supplying and erecting LED street light / Flood light fittings with High power White

LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more than

130 lm/w and corrosion free High pressure die cast aluminum housing with smooth

finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED

15 driver efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below 286.00 Nos 4092.52

description have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown.) (C) Post Top

Lantern LED fitting comprises of finish cast aluminum spigot and spun aluminum

canopy fixed with opal polycarbonate, pipe arrangement for vertical mounting driver

and accessories wired upto terminal block.IP

(i)20- 30W Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated

and high U.V. & corrosion resistance with diffuser housed in aluminium casted body

with company mark/name 160V to 270V,Power Factor more than 0.95, THD < 15 %,

16 CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 286.00 Nos 1367.54

% ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (F) Spot Light 425 Lumens, Surge-2KV

(ii) 8 to 11 Watts Cat-lll

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling erected with necessary PVC fittings &

17 Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in 1040.00 R.Mt. 67.67

approved manner as directed (d) 40 mm

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of

18 same material at required depth in existing trench for laying of cable. below ground / 1040.00 R.Mt. 62.62

road surface for enclosing cable (A)50mm outer dia

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench /

19 pipe of following size of cables. 1120.00 R.Mt. 107.06

(C) 3 core 6 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench /

20 pipe of following size of cables. 1120.00 R.Mt. 87.87

(B) 3 core 4 Sq. mm

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI

marked copper wires of following size to be erected as directed.

(e) 1.50 Sq.mm 3 core round PVC sheathed

NADIAD MUNICIPAL CORPORATION

DISTRICT :- KHEDA

BID DOCUMENTS FOR CONSTRUCTION OF COMPOUND WALL AT PIJ ROAD WALK WAY AT NADIAD FOR NADIAD MUNICIPAL CORPORATION, NADIAD,

Sr. No. Description Qty Unit Rate Amount

Supplying & erecting earth pit of minimum bore dia.150mm size approved make

Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of

corrosion free G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection

terminal dia of 12mm with constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for following type of applications.

22 (c) For Electrical Installation covering Transformer Neutrals, Lightning arrester 2.00 Each. 8636.51

Earthing, A.C.Plant & Sensitive Computer System(like Automation, SCADA) i.e

independent Earthing in normal soil.

Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of 25 Kg.

Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 6 KA and suitable for operation on 3 phase and

neutral 415V. having characteristic of quick action & tripping with all advance feature

& do not incorporate any electronic component for following Max. rating erected as

(iv) 100 Amps. FP (100 mA Sensitivity) Cat. III

Supplying & erecting IP 55 grade 150 x 90 x 75 cms section pillar fabricated from

Gauge thick joint less M.S. Sheet with angle iron legs 95 cms long made from 40 x 40x

6 mm thick. Jointless M.S. Angle with cable clamps to be buried in ground to have

appropriate erection to work Uniform Until erected with cement concrete foundation

and 45 cms high bricks work finishing with plaster etc. hinged double door with 4" x 6"

vision panel covered with Mesh & V. panel overlapping with flap for meter reading

24 internally supported on both side, with internal and outside looking arrangement with 1.00 Each. 16691.26

look and keys in duplicate 40 x 40 x 6 mm M.S. Angle of Two Nos. one is welded and

other with nut and bolt for erecting bakelite sheet. Painting the Section Pillar inside

and out side with three tank powder coated paint. section pillar roof should be

without joint with water leakage proof & tested as per IP 55 test & followed by IS

Supplying and erecting bakelite sheet 8mm thick HYLAM make on existing angle iron

Approved make Four pole moulded case circuit breaker having breaking capacity ICU

of 35 KA. at 415 V. having normal current rating up to 125A. with Fixed thermal &

26 magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections & 1.00 Each. 8055.76

complete erected in existing 16 G.M.S. housing.

Supplying & erecting power contactor for time switch complete erected as per

27 direction Cat III 1.00 Each. 2782.55

[D] 4 pole 440V 40 Amp.

Erection & connection Charges for 63A/100A TP as following

28 (b) Erection on angle iron frame duly painted with Red Oxide 1.00 Each. 134.33

Providing and erecting busbar chamber confirming to IS-375 fabricated from 16 G.M.S.

sheet, dust & vermin proof having hinged door with rubber gasket and necessary

busbar supports with COPPER busbar having current density not more than 1.6 Amp. /

sq.mm (Rated current / cross section area) duly wrapped with colour insulation tape

29 for phase sequence, three phase & neutral each suitable for following current capacity 1.50 Rmt. 3202.71

with necessary painting mounted on wall or pedestal frame of required size with

necessary connections.

(B) Suitable for 200 Amp. capacity

NADIAD MUNICIPAL CORPORATION

DISTRICT :- KHEDA

BID DOCUMENTS FOR CONSTRUCTION OF COMPOUND WALL AT PIJ ROAD WALK WAY AT NADIAD FOR NADIAD MUNICIPAL CORPORATION, NADIAD,

Sr. No. Description Qty Unit Rate Amount

Providing Approved make Triple Pole Metal Clad Switch Fuse Unit 415/500 V. with

HRC fuse of suitable load and neutral link confirming to IS.

(a) 32 A Cat III

Supplying & erecting approved make IP 55 grade Company fabricated Timer Panel of

following capacity for switch On-Off street lights on time scheduling basis made from

16G CRCA sheet duly epoxy power painted inside and outside with hinged doors and

locking arrangement consisting of suitable size of 4 Pole MCB and 4 pole contactor

(cat-III)with analog time switch, auto manual switch of same make and suitable input

and output Bakelite terminals and with door earthing approved by Engineer in charge.

Total Amount Rs:-

Total Amount Rs:-

Note- A deduction of Rs. 25000.00 will be made against the dismantled material credit in the first running bill.

Consulting Civil Engineer City Engineer

Dharmesh Deshani OPC Pvt Ltd Nadiad Municipal Corporation

Ahmedabad Nadiad