REPAIR TO JOINERY AT SOUTH OF RAILWAY LINE UNDER GE MISAMARI

Amount

Taking down Chowkat or Frame with shutter (without taking off Shutter from the Frame) not exc. 1.50 Square Metre Each,,complete all as specified and as directed.

Taking down Chowkat or Frame with shutter (without taking off Shutter from the Frame) exc. 1.50 Square Metre but not exc. 4.00 Square Metre Each, complete all as specified and as directed.

Taking down Shutter of any description, not exc 1.00 Sqm Each, complete all as specified and as directed.

Taking down Shutter of any description, exc. 1.00 Sqm but not exc 2.00 Sqm Each, complete all as specified and as directed.

M&L for easing of shutter n.exc 1.00 sq m in size without taking down and making operation in all respects complete all as directed.

M&L for easing of shutter exc 1.00 and n.exc 2.00 sq m in size without taking down and making operation in all respects complete all as directed.

Taking down and refixing of door shutter of any description exc. 1.00 square meter and n.exc. 2.00 square meter each in size at same opening after rescrewing or easing ang asjusting of any description, complete as all specified and as directed.

Taking down and refixing of door shutter of any description exc. 2.00 square meter each in size at same opening after rescrewing or easing ang asjusting of any description, complete as all specified and as directed.

Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water remove Dust, debries/ rubbish etc., complete all as specified and as directed.

S&F 2nd class hardwood beads, straight(any size) for glazed or guazed joinery,renewed,including miters etc. and removing old beads to store, complete all as specified and as directed.

M&L Second Class Hardwood Plain, Solid, Straight Chowkats and Frames, Wrought, Framed rebated on the Solid, Rounded or Chamfered, put together with Glue, Pinned at Joints, complete all as specified and as directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., conforming to Fe 290-W (Gde E-165) quality A, drilled for fixing of steel sheeting or other covering Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening,complete all as specified and as directed.

M&L Second Class Hardwood 35mm thick Glazed and Skelton Shutters, open rebated and prepared to receive Glass, Gauze, etc. (without Sash Bars) edges of Framing plain, chamfered or rounded, mitred beads for screwing Glass, Gauge, etc. sizes of members of Shutter as speci fied in MES Schedule Part-I Section 8, Clause No. 8.24(a) and fitted to Wooden Chowkat, complete all as specified and as directed.

All as per Item no.13 here in before but for 30 mm thick as in window ,ventilator shutter etc are provided with stiles and rails in MES Schedule Part-I Section 8, Clause No. 8.24(a) , complete all as specified and directed.

S&f second class hardwood,35mm thick Plain, framed,panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, complete all as specified and as directed.

M&L Flush Door Shutter 30mm thick, solid core construction with block board core and plywood face Panels commercial type on both side with particle board and fitted to Wooden Chowkat, complete all as specified and as directed.

S&F Steel Window with side Hung Shutters including projecting type Hinges with Steel Handle and Steel Peg Stay, complete without Glazing Bars, dovetailed or welded, complete all as specified and as directed.

M&L Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290.Gde-E-165 complete all as specified and directed.

S&F Factory made Solid Panel PVC Door Shutter 30mm thick (Style) consisting of Frame made out of Mild Steel Square Tube for Top and Bottom Rails, mild steel Frame shall be covered with heat moulded plain colour PVC 'C' Channel having PVC Sheet Strip 20 mm wide stuck inside with Solvent Cement for Styles and plain colour PVC Sheet for Top Rail, Lock Rail & Bottom Rail on either side and as gap insert for Top Rail, Bottom Rail Panelling of plain colour PVC Sheet to be fitted in mild steel Frame welded/sealed to the Styles and Rails with suitable Sheet Beading and jointed together with Solvent Cement and fixing in the Frame at Site as per Specification and Drawing of MES Schedule Part-II, complete all as specified and as directed.

S&F Factory made Solid PVC Door Frame of size 50x47 mm made out of 5.0 mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube and fixing in opening as per Specification and Drawing of MES Schedule Part-II, complete all as specified and as directed.

S&F aluminium anodised frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F Powder coated aluminium door shutters (Single/double shutter), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing anodised aluminum snap beading handles in each door, hinges, handles 2 nos. in each door, anodised snap beading screws, hold fast complete all as specified and as directed and as shown on drawings. NOTE:- (i) Fixing of shutter with fitting shall be as per manufacturers instruction (ii) Rate quoted is deemed to be inclusive of aluminum hardwares as indicated, glazing clips, rubber packing, anodized aluminum snap on beading for fixing glass panes in frame , handles,Locking Arrangement but Glass panes in frame shall be measured and paid separately under respective Sch A items separately at Supply only rates)

S & F Powder coated aluminium window shutters and ventilator shutter, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, handles, screws etc. complete all as specified and as directed. NOTE:- (i) Fixing of shutter with fitting shall be as per manufacturers instruction (ii) Rate quoted is deemed to be inclusive of aluminum hardwires as indicated, glazing clips, rubber packing, anodized aluminum snap on beading for fixing glass panes in frame, handles, Locking Arrangement but Glass panes in frame shall be measured and paid separately under respective Sch A items separately at Supply only rates)

Hacking out old/broken Glass exc. 1.5 sqm (any thickness, size, quality or description) from Wooden Frames or stone, concrete or brick surrounds, Glazed with Putty or fixed with Beads, complete all as specified and as directed.

M&L Sheet Glass, Ordinary, 3.0mm thick, Glazing in Wooden/Metal Frames and glazed with Beads or Oil Putty, area not exc. 0.50 SQM in Each Pane, complete all as specified and as directed.

Supply only sheet Glass, Ordinary, 5.50mm thick, Glazing in Wooden/Metal Frames and glazed with Beads or Oil Putty, area n. exc. 0.50 SQM in Each Pane, complete all as specified and as directed.

Supply only Sheet Glass, frosted, 3.0mm thick, Glazing in Wooden/Metal Frames and glazed with Beads or Oil Putty, area not exc. 0.50 SQM in Each Pane, complete all as specified and as directed.

S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire andaverage width of aperture 1.40mm and fixed with Stainless Steel Wire Staples and fixed, complete all as specified and as directed.

S&F in repair Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples and fixed, complete all as specified and as directed.

S&F in repair door closer hydraulically regulated,Aluminium Diecast body, designation No 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60kg and fixed, complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and as directed.

Supply and fix Brass Mortice lock of size 75mm, 4-Lever, complete all as specified and as directed

S&F Mild Steel Sliding Door Bolt 300mm long, Plate type, Black Japanned Finish with bright Bolt not less than 12mm dia, minimum 6 Bolts and Nuts 4 on Bolt Plate 2 on Staple Plate and fixed, complete all as specified and as directed.

S&F 140mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and as directed.

S&F Stainless Steel Butt Hinge of size 100mm, medium weight, cold rolled and fixed, complete all as specified and as directed

All as per Item no.35 here in before but for 75 mm, complete all as specified and directed.

S&F in repair Mild Steel Butt Hinge of size 100mm, medium weight, cold rolled and fixed, complete all as specified and as directed

S&F Aluminium Handle 150mm long Cast type, complete all as specified and as directed.

S&F Aluminium anodised Barrel Tower Bolt 200 mm long, Extruded Section and fixed, complete all as specified and as directed.

All as per Item no.39 here in before but for 150 mm, complete all as specified and directed.

S&F in repair Mild Steel Barrel Tower Bolt 100mm long, Stove Enamelled Black with bright Bolt and fixed, complete all as specified and as directed.

S&F Ordinary Rat Tail 300mm, Rod Pattern Springs including Roller and Roller Plate and fixed, complete all as specified and as directed.

Welding in repair exc 2.5cm but n.exc 5cm in length ( exc 20mm but n.exc 25mm in length), complete all as specified and as directed.

M&L preparing new or previously untreated Wooden Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Pink Primer, complete all as specified and as directed.

M&L preparing new or previously untreated Steel and Iron Surfaces of any description, over. 10 Cm Width or Girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

S & F in repair Harrison rails, anodised aluminium alloy with fixing brackets, stops, rollers etc., complete all as specified and as directed.

S&F 18mm thick prelaminated colour PVC sheet for cup board incl frame & fixed at site including PVC beading half round decorative type continuous piano hinges MS 30mm, 35mm dia cup board knobs 01 No on each shutter,magnetic ball catcher 01 No on each shutter, complete all as specified and directed.

M&L Rendering 15mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, plastered surfaces finished Even and Smooth, complete all as specified and as directed.

M&L Rendering 15mm thick in Cement Mortar 1:4 on Brick Walls or on Concrete Surfaces, plastered surfaces finished Even and Smooth, complete all as specified and as directed.

M& L for preparation of new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer, complete all as specified and as directed.

M&L preparing new of Walls and applying Two Coats of Cement Base Paint over a coat of primer, complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 ( Using 20mm graded agg) as in plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates concrete complete all as specified and directed.

shree kamakhya traders

M/S Mahabir Traders

M/S Singha Enterprise

Sunrise Enterprise

M/S SUNNY ENTERPRISE

Satya Enterprises

Markson