Loading
Loading…
Loading…
Tender Value
₹4.7 L
EMD Value
₹9,350
Closing Date
16 Jun 2026, 5:00 pm7d left
Executive Engineer
EE JSV Mandi
Removal of Silt inside the Pump House Repair and varnish of pumping machinary and Providing and fixing monoblock and Electricl accessories Providing and fixing12 HP mono block pumpset
2026_HPIPH_135952_1
6687-6786
Open Tender
Miscellaneous Works
90 days
Mandi
Please refer Tender documents.
6 documents required · 6 mandatory
₹350
₹9,350
6 Jun 2026
6 Jun 2026
18 Jun 2026
6 Jun 2026
16 Jun 2026
6 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Removal/Clearance of all kind of silt from sump well upto all depths in all kind of classification of soil such as pick work, jumper work, saturated soil including bailing and pumping out water with in all leads and lifts and as per the direction and entire satisfaction of the Engineer-in-Charge. | 43.98 | Cum | - | - |
| 2 | Providing Air Dried Varnish to Motors including cost of opening and assemblingof motor as per direction and to the satisfaction of the Engineer-in-chargeOne set of 60 HP and one Set of 75 HP ) | 135 | HP | - | - |
| 3 | Dismentalling and Carriage of auto transformer starter from site to factory including labour charges in all leads and lifts | 1 | Job | - | - |
| 4 | Providing and Fixing Transformer Motor starter Oil for auto transformer starter Pump House in all leads and Lifts. | 20 | Litre | - | - |
| 5 | Providing and Fixing of Ball Bearing No. 6313M/C3 SKF in all leads and lifts | 1 | Nos | - | - |
| 6 | Providing and Fixing of Ball Bearing No. 6310 M/C3 SKF in all leads and lifts | 1 | Nos | - | - |
| 7 | Providing and Fixing of Ball Bearing No. 6308-RS1 SKF in all leads and lifts | 2 | Nos | - | - |
| 8 | Providing and Fixing of 3 core HRFR PVC Insulated Industrial Grade copper Conductor (Unshethed) Flexible cable 4.00 sqmm 1100 volts ISI marked conforming to IS : 694/1990 as per requirement of site complete in all respects in all leads and lifts. | 60 | Rmt | - | - |
| 9 | Providing and fixing of monoblock pumps set of KSB / Crompton / make suitable for lifting clear cold water of undermentioned charactristics with impellers priming funnel, casing ring & shaft sleeves as per manufacturers standard practice, coupled directly to electric induction motor. The pump set shall be suitable for operation on 400 +/- 10% volts, 3 phase AC supply. The power of motor shauld be at least 10% in excess of minimum power required by the pump in complete range of +10% and (-) 15% of DP head. The motor confirm to latest IS specifications with upto date ammendments. It should include cost of wiring nuts and bolts painting etc. complete and suitable for following requirements:- | 2 | Set | - | - |
| 10 | Providing and Fixing Cast Iron Flanged Foot Valve dia mentioned below of BIR / KARTAR / PELICON make with flange Table - 17 with Nut & Bolts and Gasket including complete process of opening of existing valve and fixing new valve by all means complete job in all respect The diameter of valve as mentioned below complete in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge. 100 mm diameter | 2 | Nos | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.58 MB
Form8.pdf
Tender Documents • 1.14 MB
BOQ_201258.xls
BOQ • 0.29 MB
Form6.pdf
Tender Documents • 0.67 MB
Download all tender documents and submit your bid