Open Gym Equipments

Amount

ABDOMINAL BOARD/HYPER EXTENSION ROWER - Providing and fixing using, Minimum 80 NB GI B-class Pipe for MAIN FRAME, Minimum 32 NB GI B-class Pipe for SIDE FRAME, Minimum 25 NB G.I. PIPES for INTERMEDIATE PIPE, Nylon 66 injection moulded BEARING CAP & PIPE CAP, fully Done by first coat of Primer – jotun Brad 40-50 Micron thickness and Top Coat of pure polyester powder with 70- 80 micron thickness POWDER COAT including cost of concrete foundation , all materials, labour, etc all complete as per the instruction of Engineer in-charge

EXER CYCLE-Providing and fixing Cycle using, 25 NB & 40 NB GI B-class Pipe for MAIN FRAME, 32 NB GI B-CLASS Pipe for SEAT FRAME, 25 NB GI B-CLASS Pipe for HANDLE FRAME, Nylon 66 injection moulded BEARING CAP & PIPE CAP, fully Done by first coat of Primer – jotun Brad 40-50 Micron thickness and Top Coat of pure polyester powder with 70- 80 micron thickness POWDER COAT including cost of concrete foundation , all materials, labour, etc all complete as per the instruction of Engineer in-charge

ELLIPTICAL TRAINER-Providing and fixing using, Minimum 100 NB G.I. C CLASS pipes for MAIN FRAME, Minimum 40 NB G.I. pipe for FOOT REST PIPE, Minimum 40NB & 25 NB G.I. pipe for HANDLE, Minimum 25 NB & 40 NB GI B-CLASS Pipe for CONNECTING PIPE, LLDP Rotomoulded seat with inbuilt bolts 3/8" X 1.5" for FOOT REST, Nylon 66 injection moulded BEARING CAP & PIPE CAP, fully Done by first coat of Primer – jotun Brad 40-50 Micron thickness and Top Coat of pure polyester powder with 70- 80 micron thickness POWDER COAT including cost of concrete foundation , all materials, labour, etc all complete as per the instruction of Engineer in-charge

AIR WALKER -Providing and fixing Walker single - using, Minimum 100 NB GI C-class Pipe- for MAIN FRAME, minimum 32 NB GI B-CLASS Pipe- for LEG FRAME, Minimum 25 NB GI B-CLASS Pipe for HANDLE FRAME, NYLON 66 INJECTION MOULDED CASING CLAMPS, LLDP Rotomoulded seat with inbuilt bolts 3/8" X 1.5" FOOT REST, Nylon 66 injection Moulded BEARING CAP & PIPE CAP, fully Done by first coat of Primer – jotun Brad 40-50 Micron thickness and Top Coat of pure polyester powder with 70- 80 micron thickness POWDER COAT including cost of concrete foundation , all materials, labour, etc all complete as per the instruction of Engineer in-charge

BENCH WITH FIX WEIGHT/STEP TRAINER-Providing and fixing Bench with fix weight using, 100 NB G.I C-Class pipe for main frame, 32 NB G.I B-Class pipe for Bench frame, 20 NB G.I B-Class pipe for Handle frame, fully Done by first coat of Primer – jotun Brad 40-50 Micron thickness and Top Coat of pure polyester powder with 70- 80 micron thickness POWDER COAT including cost of concrete foundation , all materials, labour, etc all complete as per the instruction of Engineer in-charge

STANDING TWISTER TRIPPLE/HIP TWISTER -Providing and fixing using Minimum 100 NB GI C-class Pipe for MAIN FRAME, Minimum 25 NB GI B-CLASS Pipe for HANDLE FRAME, LLDP Rotomoulded seat with inbuilt bolts 3/8" X 1.5" for TWISTER DISC, Minimum 25 NB & 20 NB GI B-class Pipe for SEATING FRAME, Minimum 80 NB GI B-class Pipe for SEATING FRAME STAND, Minimum 80 NB GI B-CLASS Pipe for TWISTER STAND, Minimum 25 NB GI B-CLASS Pipe for TWISTER HANDLE FRAME, LLDP Plastic- TWISTER DISC, Nylon 66 injection moulded BEARING CAP & PIPE CAP, fully Done by first coat of Primer – jotun Brad 40-50 Micron thickness and Top Coat of pure polyester powder with 70- 80 micron thickness POWDER COAT including cost of concrete foundation , all materials, labour, etc all complete as per the instruction of Engineer in-charge

LEG PRESS/LEG EXERCISE-Providing and fixing using Minimum 100 NB GI C-class Pipe for MAIN FRAME 100 Nb Gi B-class Pipe Leg Frame : 32 Nb Gi B class Pipe Handle Frame : 25 NB Gi B class Pipe Clamps :Nylon 66 Injection Moulded casing Foot Rest : Lldp Rotomoulded Seat with Inbuilt Bolts 3/8”X1.5’.Pipe Cap : Nylon 66 Injection moulded. Bearing Cap :Nylon 66 injection moulded. Bearing Housing And Pin – seamless pipe and Round Ba bearings : Permanent Sealed of reputed Make (fag/skf) Powder coat : Done By Pure Polyester powder with 70-80 Micron Thickness POWDER COAT including cost of concrete foundation , all materials, labour,etc all complete as per the instruction of Engineer in-charge

PULL UPS/HAND EXERCISER-Providing and fixing using Minimum 100 NB GI C-class Pipe for MAIN FRAME Galvanised steel, Fastners :Stainless steel 304 grade with polycaped Post top Cap : G.I. post of wall thickness 3mm Handle frame size : 32mm/1.25” OD GI post of wall thickness 3 mm Powder coat : Done By Pure Polyester powder with 70-80 Micron Thickness POWDER COAT including cost of concrete foundation , all materials, labour, etc all complete as per the instruction of Engineer in-charge

HAND ROWER/ROWER-Providing and fixing Rider - using, Minimum 100 NB GI C-class Pipe- for MAIN FRAME, Minimum 32 NB GI B-CLASS pipe for SEAT FRAME, Minimum 40 NB & 25 NB B CLASS GI B-CLASS Pipe for HANDLE FRAME, Minimum 32NB & 25NB GI B-CLASS pipe with two handles for LEG REST, LLDP Rotomoulded seat with inbuilt bolts 3/8" X 1.5" for FOOT REST & SEAT REST, Nylon 66 injection moulded BEARING CAP & PIPE CAP, fully Done by first coat of Primer – jotun Brad 40-50 Micron thickness and Top Coat of pure polyester powder with 70- 80 micron thickness POWDER COAT including cost of concrete foundation , all materials, labour, etc all complete as per the instruction of Engineer in-charge

CHEST PRESS CUM SHOULDER PRESS/HORSE RIDER -CHEST PRESS CUM SHOULDER PRESS -Providing and fixing using Minimum 100 NB GI C-class Pipe for MAIN FRAME 100 Nb Gi B-class Pipe Leg Frame : 32 Nb Gi B class Pipe Handle Frame : 25 NB Gi B class Pipe Clamps :Nylon 66 Injection Moulded casing Foot Rest : Lidp Rotomoulded Seat with Inbuilt Bolts 3/8”X1.5’.Pipe Cap : Nylon 66 Injection moulded. Bearing Cap :Nylon 66 injection moulded. Bearing Housing And Pin – seamless pipe and Round Ba bearings : Permanent Sealed of reputed Make (fag/skf) Powder coat : Done By Pure Polyester powder with 70-80 Micron Thickness POWDER COAT including cost of concrete foundation , all materials, labour, etc all complete as per the instruction of Engineer in-charge HORSE RIDER -Product Dimension L97cm(302Ft)*W 55 cm(1.8ft)*H120 cm(4ft) Material-Galvanized steel Fastners-Stainless Steel 304 grade with polycaped Post top Cap-High Density Aluminium Sitting Seat-Polyethylene.Handle grips-HD Rubber coated Post Size-115mm/4.5”OD G.I post of wall thickness 3mm Powder coating-80 micron Akzo nobel electrostatic coated Area Required-Length 150cm(5Ft)*Width 150cm(5ft)

Ewolves Sports and Fitness (BID ID -1752830)

ordient enterprises (BID ID -1751343)