REPAIR TO WOODEN FURNITURE, RECANNING OF CHAIRS AND POLISHING ETC AT BANAR IN ARMY AREA JODHPUR

Amount

Chair Dining (FD-228 & 279

Rear Legs Taking down old unserviceable Rear Leg and Material & Labour for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Front Legs Taking down old unserviceable Front Leg and Material & Labour for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Side Rail Taking down old unserviceable Side Rail and Material & Labour for New Side Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Front or Back Rail Taking down old unserviceable Front or Back Rail and Material & Labour for New Front or Back Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Bottom Stiffener Taking down old unserviceable Bottom Stiffener and Material & Labour for New Bottom Stiffener made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Back Strip Taking down old unserviceable Back Strip and Material & Labour for New Back strip made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Bracket : Supply & Fix new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Chair Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

Shoes : Material & Labour for removing old/worn out rubber shoes with new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr - in - Charge

Re-canning Re- canning of Chair Dining in Godrej pattern with oval shape 2 mm wide new white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning complete. Rest all as shown on drawing and as directed by the Engr - in - Charge.

Chair Writing (FD-202, 250 & 280)

Rear Legs Taking down old unserviceable Rear Leg and Material & Labour for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Front Legs Taking down old unserviceable Front Leg and Material & Labour for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Side Rail Taking down old unserviceable Side Rail and Material & Labour for New Side Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Front or Back Rail Taking down old unserviceable Front or Back Rail and Material & Labour for New Front or Back Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Bottom Stiffener Taking down old unserviceable Bottom Stiffener and Material & Labour for New Bottom Stiffener made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Back Strip Taking down old unserviceable Back Strip and Material & Labour for New back strip made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Bracket : Supply & Fix new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of II class hard wood duly polished to match the existing Chair Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

Shoes : Material & Labour for removing old/worn out rubber shoes with new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr - in - Charge

Re-canning Re- canning of Chair Writing in Godrej pattern with oval shape 2 mm wide new white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning complete. Rest all as shown on drawing and as directed by the Engr - in - Charge.

Arms Rest: Taking down old unserviceable Arms Rest and Material & Labour for New Arms Rest made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Chair Easy (FD-229 & 201

Rear Legs : Taking down old unserviceable Rear Leg and Material & Labour for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Front Legs: Taking down old unserviceable Front Leg and Material & Labour for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Side Rails of Seat: Taking down old unserviceable Side Rails of Seat and Material & Labour for New Side Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Front/ Back Rails of seat : Taking down old unserviceable Front Rail of Seat and Material & Labour for New Front Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Side Rail Back: Taking down old unserviceable Side Rail of Back and Material & Labour for New side rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Top/Bottom Rail of Back: Taking down old unserviceable Top/Bottom of Back and Material & Labour for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Front Support Rail : Taking down old unserviceable Front Support Rail and Material & Labour for New Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Shoes :- Material & Labour for removing old/worn out rubber shoes with new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr - in - Charge

Bracket : Supply & Fix new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of II class hard wood duly polished to match the existing Chair Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

Re-canning Re- canning of Chair Easy in Godrej pattern with oval shape 2 mm wide new white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning complete. Rest all as shown on drawing and as directed by the Engr - in - Charge.

Arms Rest: Taking down old unserviceable Arms Rest and Material & Labour for New Arms Rest made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Bed Hard (FD-246)

TOP : Material & Labour for replacement of worn out plywood top from Bed Hard, with New Plywood top of 12 mm thick commercial, BWR grade ,ISI Marked confirming to IS-303 Make : Greenply/Archidply/Century in one piece, fixed with suitable screws complete, all as specified on drg and as directed by Engr-in-Charge.

Long Rail : M &L for replacement of old broken long Rail made out of II nd class hard wood Make : TITACHAMPA/ HOLLOK/ BANSOM Rest all as per drg.

Short Rail : Making out short Rail from old broken long rail (obtain from Item No 4.02 here-in-before) and fix rest all as per drg.

Legs : M &L for replacement of old broken legs made out of II nd class hard wood Make : TITACHAMPA/ HOLLOK/ BANSOM Rest all as per drg.

Head Board : Material & Labour for taking out all broken worn out component of head board with new one of IInd class hard wood Make : TITACHAMPA/ HOLLOK/ BANSOM and Teak face ply one side and other side commercial ply BWR ISI Marked grade all as per drg.and as directed.

Foot Board : Material & Labour for taking out all broken worn out component of foot board with new one of IInd class hard wood Make : TITACHAMPA/ HOLLOK/ BANSOM and Teak face ply one side and other side commercial ply BWR ISI Marked grade all as per drg.and as directed.

Middle Stiffner : Material & Labour for replacement of old broken stiffener connecting of legs with new one made out teak wood., Rest all as per Drg.

Steel bent clamp for corner :S &F MS clamp made out mild steel flat iron size 35 mm x 5 mm including 2 coats of synthetic enemel paint over a coat of red oxide primer.

Side Board (FD-241, 371 & 26)

Top : Taking down old unserviceable Top and Material & Labour for New Top made out of 18/19mm Prelaminated post forming MDF Board Exterior grade complete all as specified in drg and as directed by Engr-in-Charge.

Legs : Taking down old unserviceable Leg and Material & Labour for New leg made out of teak wood all as specified in drg and as directed by Engr-in-Charge.

Long Rail : Taking down old unserviceable Long Rail and Material & Labour for New Long Rail made out of teak wood all as specified in drg and as directed by Engr-in-Charge..

Short Rail : Taking down old unserviceable Short Rail and Material & Labour for New Short Rail made out of teak wood all as specified in drg and as directed by Engr-in-Charge.

Shutter : - Material & Labour for removing old worn out shutter with new shutter made out of 18/19 mm Prelaminated Particle board exterior grade duly edging 5 mm thick teak wood beading after removing old UNSV edging . Rest all as per drg .

Drawer : Material & Labour for removing old worn out drawer from the table with new drawer made out of teak wood as specified in the drg and as directed by Engr in Charge .

Side LT/RT Taking down old unserviceable Side LT/RT and Material & Labour for New Side LT/RT made out of 18/19mm Prelaminated post forming MDF Board Exterior grade complete all as specified in drg and as directed by Engr-in-Charge.

Back :- Material & Labour for removing old worn out Back from the Side Board with new Back made out of 6mm Plywood commercial BWR grade. Rest all as specified in the drg and as directed by Engr in Charge .

Knob : Material & Labour for taking out old worn out knob from the drawer of the table with new knob of best quality approved by GE/Engr-in-Charge. Rest all as specified or as directed by Engr in Charge.

Stool Dressing CB/Cushioned (FD-27, 252, 287 & 374)

Cushion for Seat : Removing of existing unserviceable cushion seat of stool dressing cushioned and Supply & Fix new foam cushion 75 mm thick 32 density Make : Kurlon/sleepwel duly stiched with fine standard thread on one side as approved by GE/Engr-in-Charge. Rest all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 350.00 Per RM)

Table Dressing Ladies (FD-251)

Mirror : Removing of old/worn out unserviceable mirror and Material & Labour for fixing new mirror 5 mm thick ( Make : MODI GUARD/ATUL as per size shown on drg & directed .

Back ply of mirror :Removing UNSV back from the mirror and S & F new back made out of 6 mm thick ply wood BWR grade. Rest all as specified in the drg and as directed by Engr in Charge.

Top : Removing UNSV top and Supply & Fix new top made out of 18/19mm Prelaminated post forming MDF Board Exterior grade. Rest all as specified in the drg and as directed by Engr in Charge.

Bottom : Removing UNSV bottom from the mirror with new Bootom made out of 18 mm thick pre laminated MDF board exterior grade. Rest all as specified in the drg and as directed by Engr in Charge.

Drawer : Material & Labour for removing old worn out drawer from the table with new drawer made out of teak wood as specified in the drg and as directed by Engr in Charge .

Knob : Material & Labour for removing unservicable knob from the table with new CP knob 40mm to suit to the drawer. Rest all as specified in the drg and as directed by Engr in Charge.

Legs : Material & Labour for removing unservicable Legs from the table with new Legs made out of 2nd class H/W. Rest all as specified in the drg and as directed by Engr in Charge.

Glass sliding shutter with alluminium channel : Material & Labour for removing UNSV Glass sliding shutter with aluminium channel from table with new Glass shutter made out of 4mm thick glass plain with aluminium channel 20 mm width. Rest all as specified in the drg and as directed by Engr in Charge.

Table Dressing Gents (FD-230/31)

Mirror :- Removing of old/worn out unserviceable mirror and Material & Labour for fixing new mirror 5 mm thick Make : MODI GUARD/ATUL as per size shown on drg & directed .

Back ply of mirror : Removing UNSV back from the mirror and S & F new back made out of 6 mm thick ply wood BWR grade. Rest all as specified in the drg and as directed by Engr in Charge.

Top : Removing UNSV top and S&F new top made out of 18/19mm Prelaminated post forming MDF Board Exterior grade. Rest all as specified in the drg and as directed by Engr in Charge.

Bottom : Removing UNSV bottom from the mirror with new Bootom made out of 18 mm thick pre laminated MDF board exterior grade. Rest all as specified in the drg and as directed by Engr in Charge.

Drawer : Material & Labour for removing old worn out drawer from the table with new drawer made out of teak wood as specified in the drg and as directed by Engr in Charge .

Knob : Material & Labour for removing unservicable knob from the table with new CP knob 40mm to suit to the drawer. Rest all as specified in the drg and as directed by Engr in Charge.

Table writing (FD-249, 275 & 33(M)

Top : Material & Labour for removing unserviceable top from the table with new top made out of 18/19mm Prelaminated post forming MDF Board Exterior grade complete. all as per specfication in drg and directed by Engr in Charge.

Legs : Material & Labour for removing unserviceable legs from the table with new legs made out of 2nd class HW complete. All as per specfication and directed by Engr in Charge.

Long Rail : Material & Labour for removing unserviceable long rail from the table including supply and fixing new long rail made out of 2nd class HW complete. All as per specfication and directed by Engr in Charge.

Short Rail : Material & Labour for removing unserviceable short rail from the table including supply and fixing new short rail made out of 2nd class HW complete. All as per specfication and directed by Engr in Charge.

Central Stiffener : Material & Labour for removing unserviceable stiffener from the table including supply and fixing new stiffener made out of 2nd class HW complete. All as per specfication and directed by Engr in Charge.

Drawer : Removing unserviceable old broken drawer and Supply & Fix new drawer ,made out of teak wood well seasoned. All as shown on drawing , as specified and as directed by Engr-in-Charge.

Store Box (Back) : Removing old unserviceable back side board and replace with 6mm thick (BWR) commercial ply.

Store Box (Side) : Removing old unserviceable side and replace with 19mm thick block board teak veneer finish (One side).

Small legs : - Material & Labour for removing unserviceable legs from the table including supply and fixing new legs made out of 2nd class HW complete. All as per specfication and directed by Engr in Charge.

Shutter : Material & Labour for removing unserviceable shutter from the table with new shutter made out of 18/19 mm thick prelaminated particle board exterior grade duly edging with 5 mm teak wood beading all around the top complete. all as per specfication in drg and directed by Engr in Charge.

Shoes : Material & Labour for removing old/worn out rubber shoes with new rubber shoe of superior quanlity with steel plated screws of suitable size complete all as directed by Engr-in-Charge

Bracket : Supply & Fix new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of II class hard wood duly polished to match the existing Chair Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

Teapoy (FD-34, 232, 278 & 382)

Top : Material & Labour for removing unserviceable top from the table and supply and fixing new top made out of 18/19mm Prelaminated post forming MDF Board Exterior grade complete. All as specfication in drg and directed by Engr in Charge

Glass Top:Top of the Teapoy shall be made of 75mm wide and 25mm thick teak wood all around the corner and balance portion of top shall be covered by 8mm thick plain glass duly round the edges and fixed up on the groove of teak wood frame to match the surface.

Long Rail : Material & Labour for removing unserviceable long rail with New Long Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Short Rail : Material & Labour for removing unserviceable short rail with New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Stiffener : Material & Labour for removing unserviceable Sstiffener with Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Legs : Material & Labour for removing unserviceable Leg with New Leg made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Shoes : Material & Labour for taking out worn out/unserviceable shoes from legs with new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Table centre (FD-235 & 274)

Top : Material & Labour for removing unserviceable top from the table with new top made out of 18/19mm Prelaminated post forming MDF Board Exterior grade complete. All as specified in drg and directed by Engr in Charge

Glass Top:Top of the Table Centre shall be made of 100mm wide and 25mm thick teak wood all around the corner and balance portion of top shall be covered by 8mm thick plain glass duly round the edges and fixed up on the groove of teak wood frame to match the surface.

Long Rail : Material & Labour for removing unserviceable long rail with New Long Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Short Rail : Material & Labour for removing unserviceable short rail with New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Stiffener : Material & Labour for removing unserviceable Sstiffener with New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Legs : Material & Labour for removing unserviceable Leg with New Leg made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Shoes : Material & Labour for taking out worn out/unserviceable shoes from legs with new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Peg table (FD-226 & 384)

Top : Material & Labour for removing unserviceable top from the table with new top made out of 18/19mm Prelaminated post forming MDF Board Exterior grade complete. All as specfication in drg and directed by Engr in Charge

Glass Top:Top of the Peg Table shall be made of 75mm wide and 25mm thick teak wood all around the corner and balance portion of top shall be covered by 8mm thick plain glass duly round the edges and fixed up on the groove of teak wood frame to match the surface.

Long Rail : Material & Labour for removing unserviceable long rail Supply & Fix New Long Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Short Rail : Material & Labour for removing unserviceable short rail with New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Stiffener : Material & Labour for removing unserviceable Stiffener with New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Legs : Material & Labour for removing unserviceable Leg with New Leg made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Shoes : Material & Labour for taking out worn out/unserviceable shoes from legs with new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Table dining 6 persons (FD-273 & 329

Top : Material & Labour for removing unserviceable top from the table new top made out of 18/19mm Prelaminated post forming MDF Board Exterior grade complete. All as specified in drg and directed by Engr in Charge

Long Rail : Material & Labour for removing unserviceable long rail with New Long Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Short Rail : Material & Labour for removing unserviceable short rail with New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Legs : Material & Labour for removing unserviceable Leg with New Leg made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Shoes : Material & Labour for taking out worn out/unserviceable shoes from legs with new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Bracket : Supply & Fix new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of II class hard wood duly polished to match the existing Chair Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

Table dining 8 persons (FD-273 & 329)

Top : Material & Labour for removing unserviceable top from the table with new top made out of 18/19mm Prelaminated post forming MDF Board Exterior grade complete. All as specfication in drg and directed by Engr in Charge

Shoes : Material & Labour for taking out worn out/unserviceable shoes from legs with new shoes of hard PVC of superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Bracket : Supply & Fix new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of II class hard wood duly polished to match the existing Chair Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

Table 3' x 2' W/O Drawer (FD-231 & 284)

Top : Material & Labour for removing unserviceable top from the table with new top made out of 18/19mm Prelaminated post forming MDF Board Exterior grade complete. All as specfication in drg and directed by Engr in Charge

Long Rail : Material & Labour for removing unserviceable long rail with New Long Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Short Rail : Material & Labour for removing unserviceable short rail with New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Stiffener : Material & Labour for removing unserviceable Stiffener with New stiffner made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Legs : Material & Labour for removing unserviceable Leg with New Leg made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Shoes : Material & Labour for taking out worn out/unserviceable shoes from legs with new shoes of hard PVC of superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Bracket : Supply & Fix new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of II class hard wood duly polished to match the existing Chair Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

Table 3'X2' With Drawer (FD-231, 223, 283 & 284)

Top : Material & Labour for removing unserviceable top from the table with new top made out of 18/19mm Prelaminated post forming MDF Board Exterior grade complete. All as specfication in drg and directed by Engr in Charge

Long Rail : Material & Labour for removing unserviceable long rail with New Long Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Short Rail : Material & Labour for removing unserviceable short rail with New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Stiffener : Material & Labour for removing unserviceable Stiffener with New Stiffner made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Legs : Material & Labour for removing unserviceable Leg with New Leg made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Shoes : Material & Labour for taking out worn out/unserviceable shoes from legs with new shoes of hard PVC of superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Drawer : Removing unserviceable old broken drawer and S/F new made out of 6mm plywood commercial BWR grade. Rest all as per specification given in the drawing and directed by Engr in Charge.

Bracket : Supply & Fix new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of II class hard wood duly polished to match the existing Chair Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

Table Bed Side (FD-28, 210 & 276)

Top : Material & Labour for removing unserviceable top from the table with new top made out of 18/19mm Prelaminated post forming MDF Board Exterior grade complete. All as specfication in drg and directed by Engr in Charge

Side LT/RT : Material & Labour for removing unserviceable Side LT/RT from the table with new top made out of 18/19mm Prelaminated post forming MDF Board Exterior grade complete. All as specfication in drg and directed by Engr in Charge

Chair WBB (FD-56 & 285)

Rear Legs : Taking down old unserviceable Rear Leg and Material & Labour for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Front Legs : Taking down old unserviceable Front Leg and Material & Labour for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Side Rail Taking down old unserviceable Side Rail and Material & Labour for New Side Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Seat Frame : Taking down old unserviceable Seat Frame and Material & Labour for New Seat Frame made out of 6mm thick commercial Plywood ISI Marked complete. All as specified in drg and as directed by Engr-in-Charge.

Bottom Stiffener : Taking down old unserviceable Rear Leg and Material & Labour for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Back Strip : Taking down old unserviceable Rear Leg and Material & Labour for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Shoes: Material & Labour for taking out worn out/unserviceable shoes from legs with new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Bracket : Supply & Fix new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of II class hard wood duly polished to match the existing Chair Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

Sofa Set 4 Seater (FD-373)

Front/Rear legs : Taking down old unserviceable front/ rear leg of sofa set 4 seater and S& F new front/ Rear leg of 2 nd class hard wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge

Side Back/Front Rail : Taking down old unserviceable Side back/Front Rail of sofa set 4 seater and Supply & Fix new Side back/Front Rail of 2 nd class hard wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge Back/ Front.

Battens for Seat/Back : Taking down old unserviceable battens for seat/back of sofa set 4 seater and Supply & Fix new battens for seat/back of 2 nd class hard wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge

Arms : Taking down old unserviceable front Arms of sofa set 4 seater and Supply & Fix new Arms of 2 nd class hard wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge

Cushion for Seat : Removing of existing unserviceable cushion from seat of sofa set 4 seater and S & F new foam cushion 100 mm thick 32 density Make : Kurlon/sleepwel duly stiched with fine standard thread and providing best quality chain with runner on one side as approved by GE/Engr-in-Charge. Rest all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 350.00 Per RM)

Cushion for Back : -Ditto- All as per item No 19.05 here-in-avove but Cushion for Back.

Shoes : Material & Labour for taking out worn out/unserviceable shoes from legs with new shoes of hard PVC of superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Cushion Cover Only for Sofa Set 4 Seater :- Taking out old unserviceable Cushion Cover size 21"x22"x4" and Supply & Fix New Cushion Cover made out of approved Tapestry cloth of best qualy duly stiched with fine standard thread and providing best quality chain with runner on one side as approved by GE/Engr-in-Charge. Rest all as specified in drg and as directed by Engr-in-Charge. (Note : Rate of Tapestry cloth should not be less than Rs. 350.00 Per RM)

Sofa Set 5 Seater (FD-373)

Cushion for Seat : Removing of existing unserviceable cushion from seat of sofa set 5 seater and S & F new foam cushion 95 to 100 mm thick 32 density Make : Kurlon/sleepwel duly stiched with fine standard thread and providing best quality chain with runner on one side as approved by GE/Engr-in-Charge. Rest all as specified in drg and as directed by Engr-in-Charge. (Note : Rate of Tapestry cloth should not be less than Rs. 350.00 Per RM)

Cushion for Back : -Ditto- All as per item No 20.01 here-in-avove but Cushion for Back.

Cushion cover Only for Sofa Set 5 Seater :- Opening and taking out old unserviceable Cushion Cover size 21"x22"x4" and Supply & Fix New Cushion Cover made out of approved Tapestry cloth of best qualy duly stiched with fine standard thread and providing best quality chain with runner on one side as approved by GE/Engr-in-Charge. Rest all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 350.00 Per RM)

Chair Dining Cushioned (FD-E6/MAP/10)

Rear Legs Taking down old unserviceable Rear Leg and Material & Labour for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Front Legs Taking down old unserviceable Front Leg and Material & Labour for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Side Rail Taking down old unserviceable Side Rail and Material & Labour for New Side Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Front or Back Rail : Taking down old unserviceable Front or Back Rail and Material & Labour for New Front or Back Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Bottom Stiffener Taking down old unserviceable Bottom Stiffener and Material & Labour for New Bottom Stiffener made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Back Strip Taking down old unserviceable Back Strip and Material & Labour for New back strip made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Bracket : Supply & Fix new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of II class hard wood duly polished to match the existing Chair Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

Shoes : Material & Labour for removing old/worn out rubber shoes with new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr - in - Charge

Cushion for Seat : Removing of existing unserviceable cushion alongwith unserviceable ply from seat of chair dining and S & F new foam cushion 75 mm thick 32 density over suitable sized 12mm thick ply wood Make : Kurlon/ sleepwel duly stiched with fine standard thread on one side as approved by GE/Engr-in-Charge. Rest all as specified in drg and as directed by Engr-in-Charge. (Note : Rate of Tapestry cloth should not be less than Rs. 350.00 Per RM)

Chair writing cushioned (TP)

Rear Legs Taking down old unserviceable Rear Leg and Material & Labour for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Front Legs Taking down old unserviceable Front Leg and Material & Labour for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Side Rail Taking down old unserviceable Side Rail and Material & Labour for New Side Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Front or Back Rail Taking down old unserviceable Front or Back Rail and Material & Labour for New Front or Back Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Bottom Stiffener Taking down old unserviceable Bottom Stiffener and Material & Labour for New Bottom Stiffener made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Back Strip Taking down old unserviceable Back Strip and Material & Labour for New back strip made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Bracket : Supply & Fix new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of II class hard wood duly polished to match the existing Chair Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

Shoes : Material & Labour for removing old/worn out rubber shoes with S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr - in - Charge

Arms Rest: Taking down old unserviceable Arms Rest and Material & Labour for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Cushion for Seat : Removing of existing unserviceable cushion from seat of chair writing cushioned and S & F new foam cushion 100 mm thick 32 density Make : Kurlon/sleepwel duly stiched with fine standard thread and providing best quality chain with runner on one side as approved by GE/Engr-in-Charge. Rest all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 350.00 Per RM)

Cushion for Back : -Ditto- All as per item No 22.10 here-in-avove but Cushion for Back.

Material and Labour for polishing of furniture including scrapping of rough surface and old worn out polished layer with scrapper /sand paper for smoothing the surface and polishing the same with of approved quality french polish to glossy finish. The items are mentioned below :-

Chair Dining FD-279/203/16/262

Chair Writing FD/20/202/250/280

Chair Easy FD-229/201/17

Chair WBB FD-26/225/285

Bed Hard FD-246/245/247

Side Board FD-241/26

Stool Dressing FD-27/252/282

Table Dressing Ladies FD-251/32

Table Dressing Gents FD-230/231

Table Writing FD-249/275/33(m)

Teapoy FD-232/278

Table Centre FD-235/274

Table Peg FD-236/277

Table Dining 6 Persons FD-273/329

Table Dining 8 Persons FD-273/329

Table 3'x2' with out drawer FD-231/223/284

Table 3'x2' with drawers FD-231/223/283/284

Table bed side FD-236/276

Sofa Set 4 Seater FD-281

Sofa Set 5 Seater FD-281

Chair Dinning Cushioned (FD/E6/MAP/10)

Chair writing cushioned (TP)

DEEKSHA BUILDERS

SNEH CORPORATION

Surendra Singh

M/S CHANDER SHEKHAR