SPECIAL REPAIRS TO JCO MESS BLDG NO. P-18 OF ARMY AVN AND PROVN OF AC SOCKETS AND ALLIED WORKS IN SMQ MISSAMARI AREA UNDER GE MISSAMARI

Amount

M&L Glazed ceramic coloured tiles in vertical surfaces 450x 350x 7 mm thick set and jointed in neat cement slurry & pointed in white or colour cement to match including backing coat 10 mm thick in Cement Mortar 1:4, including dismantling wall tiling with cement mortar bedding and removing rubbish/debris off the premises complete all as specified and directed.

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including 15 mm thick Screed bed or bedding layer of cement mortar 1:6, for laying floor finishes,including dismantling floor tiling with cement mortar bedding and removing rubbish/debris off the premises complete all as specified and directed.

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including 15 mm thick Screed bed or bedding layer of cement mortar 1:6, for laying floor finishes, including dismantling floor tiling with cement mortar bedding and removing rubbish/debris off the premises complete all as specified and directed.

M&L for Pre-polished Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors including 20 mm thick screed bed in cement motar 1:6 including dismantling floor tiling with cement mortar bedding and removing rubbish/debris off the premises complete all as specified and directed.

S&F 20mm thick 2nd class hard wood Boarding, fixed with screws/nut bolt clean sawn with butt joints in any situation, including dismantling existing unserviceable boarding complete all as specified and directed.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including removing debries of the premises complete all as specified and directed.

M&L for 75 mm thick cement concrete type D-2 (1:4:8) using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

M&L for 75 mm thick cement concrete typec C-2 (1:3:6) using 40 mm graded stone aggregate as in path/hardstanding/sub base, complete all as specified and directed.

M&L for brick work with sub-class 'B' bricks built in cement mortar 1:6 straight or curved on plan exceeding 6mtr mean radius including demolition of existing unserviceable brick work build in cement mortar including removing rubbish/debris off the premises complete all as specified and directed.

M&L for brick work with sub-class size bricks built in cement mortar 1:4 straight or curved on plan to any radius in half brick thick walls, including demolition of existing unserviceable brick work build in cement mortar including removing rubbish/debris off the premises complete all as specified and directed.

M&L rendering 15mm thick on other than fair faces of brick or concrete Surfaces in cement mortar 1:6 finished even and smooth (without using extra cement) complete all as specified and directed..

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc,complete all as directed.

M&L for 15mm thick plaster on fair faces of brick work or concrete surface in cm (1:4) to wall surface and the surface is finished even and smooth without using extra cement ,complete all as specified and directed.

S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws including dismantling of old unserviceable roof sheet of any guage or description complete all as specified and directed.

S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws including dismantling of old unserviceable roof sheet of any guage or description complete all as specified and directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confrming to Fe-290 (Gde E- 165) including necessary prepration of new surfaces and applying a coat of red oxide zinc chrome primer and applying 2 coats of synthetic enamel paint including dismantling of old unserviceable mild steel work of any description complete all as specified and directed.

S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or revited, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290. Gde-E-165, including necessary prepration of surface and applying a coat of red oxide zinc chrome primer and applying 2 coats of synthetic enamel paint complete all as specified and directed.

Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames),complete all as specified and directed.

Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame),complete all as specified and directed.

S & F Second class hard wood kiln seasoned and chemically pressure treated plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints,complete all as specified and directed.

S&F 35 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides,complete all as specified and directed.

S & F 35 mm thick factory made Second class hard wood kiln seasoned and chemically pressure treated Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc,complete all as specified and directed.

S&F for solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube in opening as per specification & as directed.

Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. .frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification complete all as specified and as directed.

S&F mild steel hold fasts; for securing chowkhats and similar small articles conforming to Fe-290 Gde-E-165 incuding treating hold fast with tar or coal tar black paint, sanding complete all as specified and as directed.

M&L providing plain cement concrete type C-1, (1:3:6), (using 20 mm graded stone aggregate), as in fixing of hold fast including necessary form work as required complete all as specified and directed.

M&L preparing surface of wood and wood based materials, and new or old of any description and girth,not otherwise described and treated with applying two coats of creosote oil,complete all as specified and as directed.

Hacking out old broken glass ( any thick ness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and provoding and fixing new ones,complete all as specified and directed.

S&F 3 mm thick Sheet glass, ordinary quality and glazing with aluminium beads in squares not exceeding 0.5 Sqm in each pane,complete all as specified and directed.

S&F in repair stainless steel wire cloth with 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed withstainless steel wire stapple complete all as specified and directed.

S&F stainless steel wire cloth with 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed withstainless steel wire stapple complete all as specified and directed.

S & F 100 mm long medium weight, cold rolled mild steel Butt hinges and fixed,complete all as specified and directed.

S & F 75 mm long medium weight, cold rolled mild steel Butt hinges and fixed,complete all as specified and directed.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised,complete all as specified and directed.

S & F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised,complete all as specified and directed.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section,complete all as specified and directed.

S&F aluminium alloy 300mm anodised sliding door bolts with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast - aluminium alloy and fixed,complete all as specified and directed.

Supply fix in repairs Harrison rails, mild steel, chromium plated fixed alongwith 2 Nos. of brackets, stops, rollers etc, complete all as specified.

S&F for Anodised aluminium/ GI snap grid power coated framed work of size main runner 39x24.70x0.80 mm, cross tee size 29.x24.70x0.80 mm, wall angle 22.2x22.2x0.65 mm and size of grid 605x605 mm for false ceiling all as specified with 4mm thick GI suspender with and including 4mm thick non Asbestos designer Cement E board fixed/inserted in snap grid ceiling and painting with 2 coats of acrylic distemper as approved including dismantling of existing unserviceable ceiling of any description complete all as specified and directed.

S&F in repairs 10 Ltrs. Capacity PVC flusing cistern low level float and handle including brackets, flush pipe, white with inlet ball valve with all accessories,complete all as specified and directed.

S&F in repairs Vitreous China squatting pan "Orissa" patern size 630x450mm white with integral foot rest , including S or P traps (Excluding flushing cistern & flush pipe), laid over 150mm thick cement concrete (1:5:10) type E2 using (40mm graded aggregate) of complete all as specified and directed.

Supply & Fix in repairs Wash down water closet (Pedestal pattern), including Plastic water closet seat cover , white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified.

S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size including cutting for and pinning ends of brackets or erecting stand,complete all as specified and directed.

S &F in repairs Vitreous china urinals, bowl type flat back size 465 x 355x 265 mm whiten minimum with grating and union for discharge pipe , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws,complete all as specified and directed.

S&F in repair, Stainless Steel Sink with Drainage Board 1.0mm thick for Kitchen with Plugs, Washers, Waste Fitting 32mm bore of Brass CP, including a Pair of Cast Iron Brackets duly Painted including cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3, overall size 915mm x 460mm Bowl size 410 mmx330 mm x160mm complete all as specified and directed. .

S&F PVC connection pipe 15 mm bore 450 mm long,complete all as specified and directed.

S&F in repairs brass cromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges,complete all as specified and directed.

S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls, including taking down existing unserviceable pipe complete all as specified and directed.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes double socketed in any length with rubber ring joints fixed in walls, including taking down existing unserviceable pipe complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bends of any radius,complete all as specified and directed.

S & F 75 mm bore PVC (SWR) bends of any radius,complete all as specified and directed.

S & F 110 mm bore PVC (SWR) Vent Cowl,complete all as specified and directed.

Supply & fix 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed,complete all as specified and directed.

S&F 15mm bore GI tubing medium graded with all fitting and fixed complete to wall and ceiling or laid in floor, including taking down existing unserviceable GI tubing and fittings complete all as specified and directed.complete all as specified and directed.

S&F 20mm bore GI tubing medium graded with all fitting and fixed complete to wall and ceiling or laid in floor including taking down existing unserviceable GI tubing and fittings complete all as specified and directed.

S & F in repairs 15mm bore angular/ concealed stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions, complete all as specified and directed

S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule,complete all as specified and directed.

S & F in repairs 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed,complete all as specified and directed.

S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union,complete all as specified and directed.

S&F in repairs health faucent (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in position complete in all respect as specified.

S&F 500 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position all as specified including 20mm bore ball brass valves, high pressure, with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed, including dismantling existing unserviceable tank complete in all respect as specified.

Removing complete existing treatment incl PCC pedding of roof surfaces by picking, sweeping clean and washing down with water to remove dust etc,complete all as specified and directed.

M&L for brushing neat cement slurry with 03 Kg of cement per Sqm,complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with and including water proofing compund as per manfacturers instructions complete all as specified and directed.

M&L 25 mm thick cement concrete PCC Type B0 1:2:4 using 12.5 mm graded aggregate,complete all as specified and directed.

M&L 3mm thick APP based polymeric membrane minimum weighing and reinforced with polyster non woven laid fabric (wt. not less than 150 gms/sqm) on primed surface by forced application including coating the surface with water based bituminous primer blow bitumen of 85/25 at 1.2 Kg/Sqm both at bottom and top of the membrance and finally finished with one coat of bitumenous aluminium primer at 100 gm per sqm complete all as specified and as per manufacturer's instrcutions. Note : Work shall be carried out by manufacturer or his Authorised applicator of manufacturer.

Supplying, laying and testing of 150 mm internal dia of double wall corrugaed (DWC) high density polythylene pipe (HDPE) and stiffness classes 8 (SN-8) with ISI marked (With CML No ) with and including all fittings & jointing materials for connection of inspection chamber/WC to first manhole of the sewage line including demolition and breaking up of existing drain pipe with concrete bedding & haunching complete all as specified and directed.

Cutting into existing manholes of 150 mm dia for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required, complete all as specified and directed.

Preparation of new or previously treated wood surfaces of any description, over 10 cm width or girth, not otherwise described appling applying two coat of synthetic enamel paint over one coat of pink primer,complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of acrylic distemper including one coat of chalk whiting on plastered surface to prepara-tory to distempering complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coat of cement base paint over a coat of primer complete and as directed.

M&L for complete removal of old surfaces of walls and applying two coats of acrylic distemper including one coat of chalk whiting on plastered/putty surface to prepara-tory to distempering complete all as specified and directed over 1 mm thick wall care putty.

M & L for Complete removal of old surface for preparation of new wall surface applying Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm over new surface over 1 mm thick wall care putty,complete all as specified and directed.

Taking down carefully existing unserviceable copper/ aluminium point wiring (light,call bell, two way, socket or power point etc) complete with fittings/fixures such as switches sockets, ceiling rose, fan regulators,bracket light fittings and making good to the disturbed surface complete all as directed.

Taking down the existing unservicable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes complete and as directed.

Taking down carefully unserviceable aluminium submain wiring of any type /location including conduit /casing and earth wire and making good the distributed surface of walls /ceiling matching with existing finishes complete all as directed

Taking out unserviceable UG Cable any cross sectional area and connection of any description of any description from any position complete all directed.

M&L for concealed point wiring with two single core 1.5 Sq.mm size FRLSH multistranded copper conductor PVC insulated cables and one single core 1.5 Sq.mm size green FRLSH colour PVC insulated,multistranded copper conductor PVC cable as earth continuity conductor,1100 volts grade, complete drawn in and including 20mm(minimim) medium grade rigid PVC CONDUIT and conduit accessories i.e. joint boxes, terminal boxes for mounting or housing switches, socket outlets, fan regulators, etc. confirming to IS specifications, including Mild Steel Pressed Terminal Box 1.22mm thick of suitable size duly painted with red oxide metal primer with 3.0mm thick Plastic Laminated Sheet Top Cover for mounting Switches, Sockets, etc. with including cutting chases for conduits & sinkings for MS Sunken boxes & making good to walls, floors etc. complete all as specified & as directed for the following :-

All as per item No 79 herein before but for One light point controlled by one, one way switch 5 Amps

All as per item No 79 herein before but for One ceiling fan / exhaust fan point controlled by one , one way switch and regulator

All as per item No 79 herein before but for One 3 point 5 Amps socket outlets point controlled by one switch on the same board

All as per item No 79 herein before but forOne 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board

All as per item No 79 above but with two run of 2.5 sqmm multi stranded Single core copper conductor 1100 volts grade FRLSH PVC insulated sheathed cable with one run of FRLSH PVC 2.5 Sqmm multi standard insulated sheathed copper wire as earth continuity conductor along with wiring and connecting to the common earth dolly on independent board.

S & F Switch piano (White) flush type single pole one way 5 Amp, 230 Volts complete all as specified.

S & F Socket outlet (White) 2 in 1, 5 pin, 5 Amps complete all as specified and directed.

S & F Switch socket combination(White) flush type multipurpose 5 pin 5 Amps two in one , 230 volts complete all as specified and as directed

S&F Switch socket combination (White) 2 in 1 5/6 pin, 15 Amp flush type universal,complete all as specified and as directed

S&F ceilling rose (White) three terminal surface bakelite type AC 50 Hz 230 Volt of size 65x50mm complete all as specified and as directed.

S & F ceiling fan regulator (White) step type 2 Module, flush type heavy duty suitable to work on 230 Volt AC supply complete all as specified and as directed

S & F Lamp holder (White) with insulated body, with back plate suitable for batten fittings complete all as specified and as directed

S&F in replacement decorative, wall mounting, champagne gold finish fixture with plastic body suitable for 9 W LED lamp B22 base made out of polycarbonate with unbreakable globe/frame suitable for LED bulb and provision of LED bulb 09 watts complete all as specified and as directed.

S & F 10 Watt, LED Blub 5 STAR LAMP with B 22 base capacity 1200 lumen complete all as specified and as directed.

S & F sheet metal enclosure MCB DB SPN 8 way with 200 amps rated bus bar 230 volts double door complete duly grouted laid and fixed in wall all as specified and directed.

S & F MCB SPN 230 volts suitable for fixing on MCB DB of capacity 40 Amps complete all as specified and as directed

S & F MCB SP, 240 volts, 6-32A Amps 50 Hz ,confirms to IS/IEC 60898 Breaking Capacity of 10 kA, B-curve, complete all as specified and directed.

Supply and fixing LED Tube lights batten fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed .

S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and PC Cover having TOP opening seperate driver compartment with IP 66 Protection and impact resistance of IK07 with electronic driver of capacity 20 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape duly fixed with Clamps nuts and bolts complete all as directed.

Excavation in trenches n exc 1.50 m wide and n exc 1.50 m depth in soft /loose soil and getting out for lying of cable and errection pipe etc complete all as directed.

Returning, filling in, trenches in soft /loose soil including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as directed.

Removal of excavated soil to a distance n. exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as directed.

M & L sand cushioning in trenches for cable protection with coarse sand laid dry in trenches with uniform thickness including consolidation complete all as directed.

Supply & Laying well burnt brick , locally available best quality (sub class "B" bricks ) laid in trences perpendicular to UG Cable protection complete all as specified.

Supply & Laying XLPE LT heavy duty UG Cable of size 25 Sqmm 2 Core laid in trences /floor/on wall/service connection PVC Insulated, sheathing and armoured 1100 Volts grade with aluminium conductor including connection to the main switch/cut out MCB/MCCB with necessary lugs after cutting to required length complete all as specified and directed.

S & F GI Tubing light grade of size 40mm dia in protection of cable at road crossing /hard standing/pole protection fixed with clam as per site requirement etc all as specified and directed.

Taking down ceiling fan/ Exhaust Fan of any sweep, keeping with safe custody and refixing the same with replacement of unsv core PVC insulated PVC sheathed 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose to fan terminal over hauling the fan complete duly painted with 2 coats of synthetic enamel paint complete all as directed.

M&L concealed sub-main wiring alongwith earth wire of size of 2 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire, ISI marked, FRLSH, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including 20mm(minimim) medium grade rigid PVC CONDUIT (ISI marked) of suitable size with all fittings and accessories ISI marked including cutting chases for conduits & and making good to walls, floors etc as per existing specifications.complete all as specified & as directed NOTE : (i)Two runs of PVC wire, one run of earth wire & one run of PVC Conduit will be measured as one length. (ii) Loop length as required and as directed deemed to be included in the UNIT RATE QUOTED.

M&L earthing with GI earth plate electrode 600x600x6mm thick buried directly in ground vertically to depth not less than 2.25m below the ground level with top edge of earth plate at a depth not less than 1.5m below the ground level connected to galvanized iron wire 4mm dia earth lead by means of bolts & nuts,check nuts & washers made of galvanised steel, earth wire protected by and including PCC (1:2:4) type B1 precast RCC cover slab (1:2:4) reinforced with 8mm dia TMT bars 100mm center to center bothways including one handle made of 10 mm dia round bar, including necessary excavation and earthwork in any type of soil, 20 mm dia medium grade galvanized steel tube for watering with one end fixed with cast iron funnel and wire mesh, 15 mm bore medium grade galvanized steel tubing for drawing earth wire GI strip protection & common salt, charcoal in alternate layers etc. complete all as shown in EP No 3 of SSR Part 1 and testing on completion complete all as specified and as directed.

Supply and Fix Cable end termination kit for LT 1.1 KV Cable for Cable 25 to 50 Sqmm 3.5 Core cable complete all as specified and directed .

M&L surface point wiring for light/fan points controlled by one, one way switch switch complete with 4 Sqmm single core PVC insulated unsheathed FR-LSH cable 1100 volts grade (ISI marked) with multistranded copper conductor with proper colour coding drawn through and including non-metallic rigid PVC casing capping medium grade with accessories (ISI marked) fixed in wall/fixed to roof, ceiling etc including provision of 4 Sqmm PVC insulated multistranded unsheated copper conductor cable FR-LSH (ISI markd) with proper colour coding as earth continuity conductor connected to common earth dolly , including Mild Steel Pressed Terminal Box 1.22mm thick of suitable size duly painted with red oxide metal primer with 3.0mm thick Plastic Laminated Sheet Top Cover for mounting Switches, Sockets, etc. with including cutting chases for conduits & sinkings for MS Sunken boxes & making good to walls, floors etc.disturbed surface of wall/floor and matching with existing specifications, complete all as specified and directed. Note:- Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles.

M&L surface type sub-main wiring alongwith earth wire of size of 2 x 4.0 sq. mm + 1 x 4 sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and PVC casing capping medium grade with accessories (ISI marked) of suitable size with all fittings and accessories ISI marked including and making good to walls, floors etc as per existing specifications complete all as specified and as directed. NOTE :(i) Two runs of PVC wire, one run of earth wire & one run of PVC Conduit will be measured as one length. (ii) Loop length as required and as directed deemed to be included in the UNIT RATE QUOTED.

M&L surface type sub-main wiring alongwith earth wire of size of 2 x 6.0 sq. mm + 1 x 6 sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and PVC casing capping medium grade with accessories (ISI marked) of suitable size with all fittings and accessories ISI marked including and making good to walls, floors etc as per existing specifications complete all as specified and as directed. NOTE : (i) Two runs of PVC wire, one run of earth wire & one run of PVC Conduit will be measured as one length. (ii) Loop length as required and as directed deemed to be included in the UNIT RATE QUOTED.

S & F sheet metal enclosure MCB DB TPN 4 way with 200 amps rated bus bar 415 volts double door with magnetic locking system duly grouted on walls and making good distrubed surfaces to match with the existing complete all as specified and directed.

S & F MCB TPN 415 volts suitable for fixing in MCB DB of capacity 63 amps complete all as specified and directed.

S & F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with locking system complete grouted on walls and making good disturbed surfaces to match with the existing complete all as specified and directed .

S & F MCB SP 16 Amps C-Series 240 volts for fixing on MCB DB's complete all as specified and directed.

S & F plug and socket board for AC with MCB DP 25 Amps capacity AC 230 Volt with Plug Top with Indicator duly fixed and connected complete all as specified and directed .

Supply & laying XLPE LT UG XLPE sheathed PVC insulated, screened PVC bedded, Galvanised Steel Strip of Wire armoured Electric Power Cable heavy duty with stranded Aluminium Conductor 1100 Volt grade, cross-sectional area 25 Sqmm 3.5 Core, laid in trenches/surface of Wall/in GI Pipe along with Pole for connec-tion to OH Lines including Brass Cable Glands Mild Steel Flat Iron Clamps, etc. and Testing, complete all as specified and as directed. NOTE : Earthwork, Sand Cushioning, Bricks, GI Pipe, etc. will be measured and paid under appropriate Items.

S & F GI Tubing light grade of size 50mm dia in protection of cable at road crossing /hard standing/pole protection fixed with clam as per site requirement etc all as specified and directed.

RC Madan

A N BUILDERS