Providing fitting fixing of Electrical appliances (Spare Parts) for panel board of different DWS schemes of Raishyabari RD Block area under DWS Sub-Division, Gandacherra Dhalai.(Gr-II)

Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses), triple pole with Neutral Link (TPN), 415/500 Volt, L & T / Havells / BCH make etc. complete as per specification and direction of the Engineer-in-charge.

i. 63 Amps

ii. 100 Amps

Providing and fitting fixing of Fully Automatic Star Delta type Motor starter ( 3 ph. 50 Hz, 415V, in Steel Sheet Enclosures with Contractors and Timer etc. complete suitable for submersible Pump L & T, BCH, ABB make as per specification and direction of the Engineer-in-charge.

i. 25 HP/18.5 kw Relay range within 13-21 + 10%

ii. 35 HP/26 kw Relay range within 20-32 + 10%

Providing and fitting fixing of Direct on line (DOL) motor starter L&T/BCH make ( 3 phase, 50 Hz, 10 HP/7.5 kw relay range within 13-21 + 10%) in steel sheet enclosure complete as per direction of the engineer in charge.

Providing and fitting fixing of 6 feet x 4 feet x 1 inch (thickness) Gamair wood / plywood pannel board for fitting fixing of electrical items, in/c 2 nos MS angle post ( size 2 inch x 2 inch x 9 feet ), nuts & bolts etc. for irrection of the same by 1:1.5:3 cement concrete casting ( 1 feet x 1 feet x 2 feet) below the ground level and painting two or more coats & plastic paint as per specification and direction of the Engineer-in-charge.

Providing and fitting fixing with PVC insulated single core multistrand Copper cable conforming to IS : 694 for inter connection with all electrical equipments of the pannel board as per specification and direction of the Engineer-in-charge.

i. 10 sqmm

ii. 16 sqmm

Providing and fitting fixing with PVC insulated 3 core flat Copper cable conforming to relevant IS code for submerssible motor with all necessary equipments and fittings as required as per specification and direction of the Engineer-in-charge.

i. 4.0 sqmm

ii. 6.0 sqmm

iii.10.0 sqmm

Providing and fitting fixing of Moulded Case Circuit Breaker (MCCB) of different Thermal release range , 415 + V, 50Hz (L & T, BCH, ABB make) as per specification and direction of the Engineer-in-charge.

i. 25-32 Amps

ii. 32-40 Amps

iii. 50-63 Amps

Providing and fitting fixing 3 phase indicating lamp fiited with panel board with three different colour lamps with batten holder complete as per specification and direction of the Engineer-in-charge.

Providing and fitting fixing heavy duty box type (Resin filled) power factor correction capacitor L & T make etc. complete as per specification and direction of the Engineer-in-charge.

i. 5-15 kVAr 440 V

Supplying and fixing of fuse unit kitkat in porcelain base in/c necessary connection etc. as per required (HPL) make.

i) 63 Amps cutout

ii) 100 Amps cutout

Supplying & fixing of aluminium thimble in/c necessary connection etc as required

Providing and fitting fixing of Bimetal overload relay type series L&T make) as per direction of the Engineer-in-charge.

ii.20-32 AMP

iii. 28-42 AMP

Providing and fitting fixing of slandered operation coil for 415V,50Hz,L&T make as per direction of the Engineer-in-Charge.

Repairing of existing L&T make FASD Starter by providing & fitting fixing of necessary spare contact kit(in/c spare coil),replacement of damaged connection wire in the starter,testing & commissioning etc. as per specification & direction of the Engineer-in-Charge.

Providing and fitting fixing of Thermal Timer Type GT 200,415V,50Hz for 5-18 sec,L&T make as per direction of the Engineer-in-Charge.

Providing and fitting fixing of Thermal Timer Type ET 100,415V,50Hz for 9-30sec,L&T make as per direction of the Engineer-in-Charge.

Please Enable Macros to View BoQ information