Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.8 LAccepted-AOC 233 12 AMARGARH GAMRI GALI NO 11 KAITHAL 136027 | KAITHAL | KAITHAL | HARYANA | 136027 | 1 | Accepted-AOC ok | |
| 2 | 2₹2.0 L+₹22,928.88 (13.0%)Rejected-Finance | 2 | Rejected-Finance ok | |
| 3 | 3₹2.8 L+₹1.1 L (60.7%)Rejected-Finance | 3 | Rejected-Finance ok |
| Sl No | Description | Qty | Unit | THE DISIKA CO-OP LC SOCIEY LIMITED L2 | The Multani Enterprises Co-operative Labour and Construction Society ltd L1 | MANNAT COOPERATIVE LABOUR AND CONSTRUCTION SOCIETY LTD. ATWAN L3 |
|---|---|---|---|---|---|---|
| 1.00 | Single Pole Setup Cycle - Providing, Designing and Single Pole Setup Cycle and standing within pair of size 933 x 550 x 1330mm fabricated and other specifications mentioned in detail estimate complete in all respect | 1 | Each | 45,000 ₹45,000 Lowest | 45,800 ₹45,800 | 82,000 ₹82,000 |
| 2.00 | Providing and fixing Seated Chest Press in a pair with below specifications:- Dimensions (LxWxH): 1800x700x2000mm. Fabricated with main post of NB 100mm (G.I) ‘C’ Class Pipe of approved make. Main frame of NB 50mm (G.I) ‘C’ Class pipe. Handle frame of NB 32mm (G.I) ‘C’ Class pipe. (‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres). All pipes are powder coated with 80- 120 micron thick Akzo Nobel or equivalent paints. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Handle bars are provided with high end quality rubber grips. Base plate cover made of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, UV resistant and coloured. Seat to be made up from virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness,coloured, UV resistant and environmental friendly. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. The equipment are fitted with inbuilt limiters to prevent unwanted movements. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. High tensile steel with galvanized nut bolts are used for assembly.
Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer.
1. ISO 18001
2. ISO 50001:2018
3. ISO 45001:2018
4. ISO 14001:2015
5. ISO 9001:2015
6. DIN 79000-2012
7. EN 16630:2015 | 1 | Each | 40,000 ₹40,000 Lowest | 45,800 ₹45,800 | 82,000 ₹82,000 |
| 3.00 | Providing and fixing Arm Wheel in a pair with below specifications:- Dimensions (LxWxH): 850x800x1800mm. Fabricated with main post of NB 100mm (G.I) ‘C’ Class Pipe of approved make. Main frame of NB 32mm (G.I) ‘C’ Class pipe. (‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres). All pipes are powder coated with 80-120 micron thick Akzo Nobel or equivalent paints. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Base plate cover made of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, UV resistant and coloured. Seat to be made up from virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness,coloured, UV resistant and environmental friendly. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. High tensile steel with galvanized nut bolts are used for assembly.
Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer.
1. ISO 18001
2. ISO 50001:2018
3. ISO 45001:2018
4. ISO 14001:2015
5. ISO 9001:2015
6. DIN 79000-2012
7. EN 16630:2015 | 1 | Each | 35,000 ₹35,000 Lowest | 45,800 ₹45,800 | 62,000 ₹62,000 |
| 4.00 | Providing and fixing Triple Twister with below specifications:- Dimensions (LxWxH): 1700x1300x1300mm. Fabricated with main post of NB 100mm (G.I) ‘C’ Class Pipe of approved make. Main frame of NB 32mm (G.I) ‘C’ Class pipe. Handle frame support of NB 32mm (G.I) ‘C’ Class pipe. (‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres). Foothold plate of made of cost iron of 12mm thickness. All pipes are powder coated with 80-120 micron thick Akzo Nobel or equivalent paints. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. The equipment is fixed on ground with concrete of minimum strength M-25 and Expansion Bolts. Once the concrete is set, the equipment is fixed on to it. High tensile steel with galvanized nut bolts are used for assembly.
Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer.
1. ISO 18001
2. ISO 50001:2018
3. ISO 45001:2018
4. ISO 14001:2015
5. ISO 9001:2015
6. DIN 79000-2012
7. EN 16630:2015 | 1 | Each | 40,000 ₹40,000 Lowest | 45,800 ₹45,800 | 40,000 ₹40,000 Lowest |
Tender Value
₹3.0 L
EMD Value
₹5,900
Closing Date
12 Nov 2025, 5:00 pmClosed
Saurabh Goel
Municipal Corporation Ambala
Providing and Fixing of Open Gym in Observation Home, Municipal Corporation Ambala City. (Only for L/c societies )
2025_HRY_481624_1
20255AEE716E 3D1C 47DC B8E3 05FE47DD69E9282ULB
Open Tender
Civil Works
Works
150 days
Ambala City
2 documents required · 2 mandatory
₹500
₹5,900
Yes
3 Dec 2025
5 Nov 2025
13 Nov 2025
5 Nov 2025
12 Nov 2025
5 Nov 2025
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.81 MB
BOQ_559608.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .