Construction, Supply, Installation, Testing and Commissioning of Zip line and Rope Cycling/ Sky Cycling at Wular Vantage Park, Garoora.

The job includes Survey, Design, Supply, Installation, Testing and Commissioning of Single Zip Line System at Wullar Vintage Park Garoora Bandipora, crane hire, site establishment and scaffolding; installation of rope, tensioning to design sag, brake setting, load testing (150 % static, dynamic runs across the rider envelope) and commissioning; operator training (8 persons, 5 days), O&M manual, inspection checklists and log books detailed as below: A. Survey and Civil works:- The job includes DGPS / total-station topographic survey of the corridor including a levelled section through the take-off crest, geotechnical and rock investigation at the platform, tower and anchor positions, detailed structural design (IS 800 / IS 875 / IS 1893 Zone V), cable dynamics report, GFC fabrication drawings, and independent third-party structural certification with load-test witnessing also Excavation, PCC and RCC M25 pad footings with pedestals — 4 nos. for the take-off launch platform, set back from the crest, and 4 nos. for the landing tower legs; incl. reinforcement, anchor bolts, backfill. RCC M25 anchor blocks for the take-off backstay and the landing rear anchor (2 nos.), buried, with embedded anchor assembly; take-off block founded on or dowelled into rock where the survey confirms it. The job also includes Crest edge stabilisation and drainage at the take-off, plinth protection and levelled approach at both structures. B. Steel structures (fabricated mild steel, painted, transported and erected) The Job Includes Take-off launch platform: 4-leg braced frame at the crest, rope attachment above designed crest level, 3.0 × 3.0 m deck at 3.0 m, saddle head, access steps at grade, handrails and launch gate. Landing tower: 4-leg lattice, attachment at designed level, 3.0 × 3.0 m deck, staircase, brake-line frame, handrails, gates. Quantity as above, Backstay and rear-anchor assemblies: forged eye plates, pins, bridle plates. C. Zipline system The Job Includes Main wire rope (Make: Severstal Metiz or equivalent) (Construction: - 1 x K43 (1 + 6 + 12 + 12 + 12) 18 mm 6×19 IWRC, 1960 grade, pre-stretched, galvanized, incl. tails and spooling = 350 m Termination and tensioning hardware: forged turnbuckle 16 t SWL (2), forged wire rope clips, heavy-duty thimbles, bolt-type shackles, swage/spelter sockets Manual dual-layer braking system: primary brake block on the main rope with bungee-cord retraction line and landing-operator control, plus secondary spring-buffered emergency arrest block, with brake frame and fittings Head Rush Impact trolley with locking hook = 10 no. Rider PPE sets: EN 12277 sit harness, EN 12492 helmet, double lanyard, EN 12275 carabiners, gloves = 10 sets. Walkie-talkie communication system = 2 sets. Rescue system: Rescue trolley, haul kit, descent device, edge protection, rope 350 m. Bilingual rider briefing and eligibility boards at both stations, weight-limit and prohibition notices, emergency contact and evacuation notice boards, calibrated digital weighing platform, and rider log / declaration register system Launch gate, deck safety tethers, anchor points and operator stations (both decks)