PROVN OF CERTAIN TOILETS AND ADDN/ALTN TO EXISTING TOILETS AT VARIOUS LOCATIONS AT AF STN AMBALA UNDER GE (AF) AMBALA

Amount

Surface excavation not exceeding 30cm deep & averaging 15cm deep in soft/loose soil including removal of vegetation, bushes, shurbs (not exceeding 30cm in girth) complete all as specified & directed.

Excavation in trenches,not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. Or for shafts, wells, cesspits, manholes, pier holes, and laying of lable etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in Soft /loose any type of soil complete all as specified & directed by Engr -in -Charge

M&L for plain cement concrete 1:4:8 type D2 (using 40 mm graded mechanically crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed by Engr -in -Charge

M&L for RCC M-25(20mm graded mechanically crushed stone aggregate) for foundation including rafts, footings, foundation beams, plinth beams, bases for columns, etc, complete all as specified & directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified and directed by Engr -in -Charge

M&L for formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings, openings in concrete walls, floor and roofs not exceeding 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exceeding 10cm but not exceeding 20cm wide for fair finished surfaces of concrete complete all as specified and directed by Engr -in -Charge.

M&L for RCC M-25(20mm graded mechanically crushed stone aggregate) for slab supported on walls, beams and columns in floors, roofs, landings balconies canopies, deck slab and in shelves and the like etc etc complete all as specified & directed.

M&L for RCC M-25(20mm graded mechanically crushed stone aggregate) for columns, pillars, pierrs, posts & struts etc complete all as specified & directed.

M&L for RCC M-25(20mm graded mechanically crushed stone aggregate) for beams, cantilevers bressumers, lintels over 1.5m span etc complete all as specified & directed.

M&L for formwork to sides of concrete foundations, footings, bases ofcolumns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for fair finished flat surfaces of concrete complete all as specified and directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished flat surfaces of concrete complete all as specified and directed.

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished flat surfaces of concrete complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, Fe 500/Fe 500D grade confirming to IS-1786, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in main reinforcement complete all as specified and directed.

M&L for mild steel TMT bars 6mm to 8mm dia, , Fe500/Fe500D grade confirming to IS-1786, cut to length cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in stirrups, spacer & binders complete all as specified and directed by Engr -in -Charge

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and directed by Engr -in -Charge

Removal of soil to a distance not exceeding 50m and depositing where at a level not exeeding 1.5 m above starting point directed complete all as specified and directed by Engr -in -Charge

M & L for laying broken stone or boulders hardcore of guage exceeding 63 mm but not exceeding 100 mm deposited spread and levelled in layers not exceeding 15 cm thick watered rolled/rammed to a true surface complete all as specified and directed

M&L for 75 mm thick Plain Cement Concrete, (1:4:8), type D2, using 40 mm graded mechanically crushed stone aggregates, as in sub base complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B-1 (25mm thick) using 20mm graded mechanically crushed stone aggregate as in leveling course/sub base complete all as specified directed by Engr-in charge

M&L for 15mm thick screed bed or bedding layer in CM 1:4 for laying floor finish and. Complete all as specified and directed by Engineer-in-Charge.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick Square/rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white of coloured cement to match, complete all as specified & directed.

M&L for coloured glazed ceramic tiles 300 x450x 7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed .

M&L for 75mm thick PCC (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in paving/plinth protection/ laid in panels and joints filled with mix of bitumen and sand (1:3) by weight, finished the surface even and fair without using extra cement complete all as specified and directed

M&L for brick work with fly ash bricks brick straight or curved on plan exceeding 6m mean radius built in cement mortor 1:6.all as specified and directed by the Engr-in-Charge

M&L for brick work with fly ash bricks straight or curved on plan to any radius built in half brick thick walls built in cement mortor 1:4.all as specified and directed by the Engr-in-Charge

M&L for 15mm thick rendering on brick or concrete surface wall on fair face/other than fair face in cement mortar 1:4 and finishing the surface with even and smooth without using extra cement mixing with approved water proofing compound all as specified and as directed. Note: Water proofing compound shall be measured and paid seperately

Supply only water proofing compound, complete all as specified & directed.

M&L for rendering 10mm thick on fair faces /other than fair face of brick work or concrete surfaces in CM 1:4 as backing coat to receive wall tiles etc complete all as specified & directed.

M&L for 5mm thick rendering on ceilings in cement mortar 1:3 and finishing the surface with even and smooth without using extra cement all as specified and as directed.

M&L for preparation of newly plastered or unplastered surfaces and two coats of Oil bound distemper on wall surface over a coat of primer complete all as specified and as directed.

M&L for new surface applying three coat of white wash on ceiling surface complete all as specified and as directed.

M&L for Applying two coats of cement base paint over a coat of primer on new wall surface including preparation of surface complete all as specified and as directed.

S&F Pillar tap 15mm dia, cast copper alloy, with capstan heads, chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shank and fly nuts, screwed for iron pipe and fixed and complete all as specified and as directed.

S& F Stop valves/angle cock 15mm dia cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S & F 15 mm CP cast copper alloy bib taps fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F 32mm bore High density polyethylene pipes (HDPE) of pressure rating 6kgf/sqcm laid in trenches complete all as specified and as directed.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floors complete all as specified and as directed.

S&F, UPVC (SWR) pipes 110 mm dia single socketed in any length with solvent cement joints laid under floor or on walls/trench fixed as soil / waste / vent pipes with Stack clamps made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall complete all as specified and as directed.

S&F PVC (SWR) bends any radius, 110mm bore with / without access door, complete all as specified and directed.

S&F 15 mm bore Galvanized Iron tubing, medium grade, with all fittings, such as Tee, elbows, sockets, unions, short pieces and application of bituminous paint in concealed portion, fixed to wall/ ceiling or laid on floors or trench , complete all as specified and as directed

S&F 20 mm bore Galvanized Iron tubing, medium grade, with all fittings, such as Tee, elbows, sockets, unions, short pieces and application of bituminous paint in concealed portion, fixed to wall/ ceiling or laid on floors, complete all as specified and as directed.

S&F UPVC floor trap 75mm dia plain with PVC grating,type-B pipes including jointing to waste pipe with solvent cement complete all as specified and as directed.

S&F PVC connection 15 mm dia, 450 mm long including check nut complete, all as specified and directed.

M&L for pre- polished granite slab machine cut of any shade as approved by GE of 15 to 20 mm thick including necessary notching, chamfering the edges over cement screed bed including Cutting, Grinding and Mirror polishing(Granite finish) with suitable grinding stones complete all as 'specified and as directed.

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platforms, and other similar situations complete all as specified and directed.

S&F vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but including sheet cover and complete all as specified and directed.

S&F Viterous china wash basin, white, flat back, size 630x450mm counter sunk oval type fixed in granite excluding taps, waste,chain and plug and porcelain stopper complete all as specified and directed

S&F Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe, complete all as specified & directed.

S&F water closet squatting pan (Orissa pattern) 580x440mm, white with integral foot rests including connecting to trap and to flushing pipe antisyphonage pipe including making good to floor (excluding flushing cistern and flush pipe), complete all as specified & directed.

S&F cast iron 'P' trap 100mm dia, complete all as specified & directed.

S&F vitreous china urinal partition ,white of size 310 x 700mm etc complete all as specified and directed.

S & F waste coupling CP brass (half or full threaded) 32 mm dia complete all as specified and directed.

Supply and fixing PVC valve less syphonic action type flushing cistern 10ltr capacity low level, white/coloured with inlet ball valve flaot and handle including bracket and fixing of PVC flush pipe 32 mm dia and PVC connection pipes complete all as specified and directed.

Supply and fixing flush pipe of polythene of low or high density 32 mm PVC for low level flushing cistern complete all as specified.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified & directed.

S & F chromium plated square shape towel ring fixed with chromium plated brass screws in approved pattern complete all as specified and directed.

S & F stainless steel chromium plated toilet paper holder in approved pattern, shape and size complete all as specified & directed.

S & F as fancy type chromium plated brass soap dish suitable for double soap fixed of approved pattern, shape and size complete all as specified & directed.

S&F factory made solid PVC moulded door shutter (with wood free EPS), 28 to 30 mm thick (Stiles) with 2, 4, 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face & fixing in frame at site as per drawing shown on SSR complete all as specified and directed.

S&F Solid PVC Door Frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per complete all as specified & directed..

S&F steel ventilator with top hung shutter including hinges peg stay to receive glazing or gauzing and one coat of primer including fixing of hold fast size 25 x 5 mm of flat iron etc complete all as specified and directed.

S&F butt hinges, stainless steel and fixed, 100 mm long complete all as specified and directed

S&F 150 mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified & directed.

S & F 150 mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed

S & F 100 mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed

S & F 3 mm thick sheet glass figured glass not exceeding 0.50 sqm each pane and fixed with oil putty or with wooden beading in square etc complete all as specified and directed.

M&L for Preparation of new steel surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S & F 500 Litre capacity rotational moulded polythene water storage tanks (cylindrical vertical with closed top) of specifications as per MES Schedule 2009, Part – I and hoisted, fixed in position complete all as specified and directed.

S&F Gun metal Gate valves 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed including including cutting / threading old pipes and provision of new fittings such as Tee, socket, elbow, union etc as required, complete all as specified and directed

S & F 20 mm bore ball valves, high pressure, PTMT, with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles and disposing off complete all as specified and as directed.

M&L for brick work with sub class B bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks straight or curved on plans to any radius in half brick thick walls built in CM (1:4), complete all as specified & directed.

Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including all necessary scaffolding as required and rubbishing off the premises etc complete all as specified and as directed..

Taking down chowkats or frame without taking off shutter from the frame not exceeding 1.50 Sqm each from the frame and removing from site, including cutting holes for taking out hold fasts and making good disturbed portion in cement mortar 1:3, complete all as specified and as directed

Demolition of cement concrete in ground floor and paving not exceeding 15cm below or above ground level removing debris outside MD land complete all as specified & directed.

Demolition of cement concrete of any description and any position not otherwise specifically provided for. and disposing off debris to outside the MOD land complete all as specified & directed.

Demolition of floor, hearth or wall tiling including cement mortar bedding (including backing), removing serviceable tiles and disposing off debris to outside the MOD land complete all as specified & directed.

S& F GI spout 40 mm dia medium grade to be embeded in sunken floor complete all as specified and directed.

Demolition of RCC of any description & in any position (reinforcement cut as required to facilitate demolition) and disposing off rubbish outside MD land complete all as specified and directed.

M&L for RCC 1:2:4 type B-1,nominal mix using 20 mm graded mechanically crushed stone aggregates as in sheleves, fins, fascia louvers, parapet and railing complete all as specified and as directed.

M&L for carrying out water proofing treatment of sunken floor as under:- (i)The concrete/ wall surface shall be cleaned throughly of all laitance , loose particles, dust , grease etc. any friable unsound area shall be chipped, cleaned and there after pre-welted to a saturated surface dried conditions.(ii) In case of potholes , superficial cracks found , the same shall be repaired with polymer modified mortar 1:3 ( 1 cement and 3 coarse sand )using Dr fixit pidicrete URP 301/Sikka latex or equivalent in Asian paints/ Forsoc as admixture @ 10% of cement content and the same shall be applied on vertical area after removing of plaster upto 2 ft height (iii)On the prepared surface , apply a primer coat of Sika latex / Dr. fixit pidicrete URP 301 or equivalent in Asian paints/ Forsocmodified cement slurry 1:4:8 (1 admixture : 4 water : 8 cement) , after prewetting the substrate @ 2 kg/sqm .(iv)the surface thus prepared shall dampen upto saturation and apply two coats of sika top seal 107 or equivalent in Dr fixit piddilite/Asian paints/forsoc ,acrylic modified water proofing coating on the entire area @1.5 kg/sqm (each coat) Scond coat shall be applied after 6-8 hrs after the first coat and in the direction right angle to the previous coat . the water proofing should be taken to a vertical height of minimum 600 mm above .(v) Apply open woven glass fiber mesh of sika Fab 1 or equivalent in Dr fixit piddilite/Asian paints/forsoc, 150 mm wide strip over the PCC benching (Gola) whilst the first coat is wet and then apply scond coat . cure the hydrosent application ( Minimum 6-8 hrs drying) for a minimum 3 to 5 days .(vi)Apply a protection layer of 10 mm thick plaster made of 1:4 cement sand mortar admixed with integral water proofing compound Sika plastocrete plus/ Dr fixit piddilite LW plus or equivalent in asian paints/ forsoc @ 200 ml/bag of cement , applied over the water proofing coating complete all as specified and directed. .

M&L for Plain Cement Concrete (1:5:10) type E2, using 40 mm graded mechanically crushed stone aggregate as in sunken slab filling, mass concrete etc., complete all as specified and as directed.

Taking up or down existing GI water tubing complete with all fittings of 15 mm bore complete all as specified and as directed.

Taking up or down existing GI water tubing complete with all fittings of 20 mm bore complete all as specified and as directed.

S&F PVC (SWR) gully trap 125x110 mm ,made of type-B pipes ,setting and jointing with solvent cement complete all as specified and as directed.

S&F brass Chromium plated shower rose, fancy type,suitable for 15 mm boe pipe with or without swivel joints any size including fixed to steel pipe or union complete all as specified and as directed.

Demolition of breaking up drain/ water pipes of AC/RCC/PVC of 100/75mm bore including all fittings etc complete all as specified and as directed.

Dismantling water tank of capacity exceeding. 250 Ltrs but not exceeding. 500 ltrs, complete all as specified & directed..

S& F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S& F Stop valves/angle cock 15mm dia cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends but fancytype, chromiumplated with shank & cup concealed type) for iron pipe or for unions and fixed complete all as specified and as directed.

M & L for concrete bed to drain pipes including packing under , haunching against RM the sides of pipes after they are laid and tested in cement concrete 1:3:6 for 150 mm dia pipe complete all as specified and directed.

M&L for H.D.P.E. Double wall Corrugated (DWC)Pipes (ISI marked) 150mm bore SN-8 class as per IS 16090 part-II for nonpressure under ground drainage and sewerage application with specials including cost of O rubber ring couplers etc, laid in treanches on concrete bed to level /gradient, jointing with appropriate class fittings as per manufacture's instructions including jointing accessories and fittings complete all as specified and directed by Engineer-in-charge.

M&L For PCC 1:3:6type C-2 using 40 mm graded mechanically crushed stone aggregate ,Cement concrete in foundations, filling and mass-concrete complete all as specified & directed.

M&L for cement concrete 1:2:4 type B1 using 20 mm graded mechanically crushed stone aggregate as in surface channels and drains complete all as specified and directed.

M&L for Pre cast cement concrete 1:2:4 type B1 (using 20 mm graded mechanically crushed stone aggregate) set in cement mortar 1:4 for drain covers,man holes cover etc.(Reinforcement shall be measured separately), complete all as specified & directed.

Removing excavated material (soils) exceeding. 250 m but not exceeding. 500 m and depositing where directed at a level not exceeding. 1.5 m above starting point complete all as specified and directed

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required, complete all as specified & directed.

M&L for cement concrete 1:2:4 type B0 ( using 12.5 mm graded mechanically crushed stone aggregate ) as in coping, for water trough and the like including weathering , slightly rounded or chamfered agle and throating etc incl necessary form work etc complete all as specified and directed

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement, complete all as specified and directed

M & L for 100 mm thick cement concrete 1:4:8 type D 2 (40 mm graded mechanically crushed stone aggregate ) as in sub base, finished even and rough to receive the topping layer for hard standing complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified & directed.

M & L for providing cement concrete in roof ,Kerbs, mud stops ,interlocking tile rounded or chamfered on edges 1: 2:4 type B1 ( 20 mm graded mechanically curshed stone aggregate) etc complete all as specified and directed

M&L for coloured Chequered cement concrete tiles 30cm x 30cm x 20 to 22mm thick of with grey cement and pigment set jointed and pointed in neat cement slurry in floors and cut and polished laid ande over 15mm Screed in CM 1:4 all as specified and as directed.

Taking down carefully copper / Aluminium point wiring including (light, fan, socket or power complete fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades conical fan regulators, light or power sockets etc) removing materials from site and making good disturbed surfaces of walls roofs etc complete all as specified and directed

Taking down carefully UNSV DBs including MCBs of any make, type, capacity and making good disturbed surfaces of walls, floors etc complete all as specified & directed.

M&L for point wiring with single core PVC insulated FRLS unsheathed, 1100 volt grade cable with multi strand copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic concealed PVC conduit,25mm, medium grade, as directed/ ground requirement, ISI marked of suitable size, ceiling with GI screws, rawl plugs with all fittings including Tee, Junction boxes and provision of pressed steel terminal box powder coated or PVC Box of suitable size with 3 mm thick laminated or PVC sheet cover for mounting switch sockets and regulators and drawing continuous earth wire of PVC insulated FRLS unsheathed 1100 Volts grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) complete all as specified and directed.

One light/ ceiling fan/exhaust fan point controlled by one 5Amps switch, complete all as specified & directed.

One 3 pin 5 Amps socket point controlled by one switch on same board,complete all as specified & directed.

One 3 pin 5 Amps socket point controlled by one switch on independent board,complete all as specified & directed.

All as per item No.108 here-in-before but with 2.5 Sqmm for 3 pin 16 Amps socket point controlled by one switch on independent board and 2.5 Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and directed.

S&F switch piano flush type single pole, one way 5 amp complete all as specified and directed

S&F socket outlet 2 in 1 , 3 pin 5 A flush type complete all as specified and directed.

S&F switch piano flush type single pole, one way 15 amp complete all as specified and directed .

S&F socket outlet 2 in 1 , 3 pin 15 A flush type complete all as specified and directed.

S&F ceiling rose 65x50mm three terminals 230 volt complete all as specified and directed

S&F LED lights fitting 1x 18W, 220V, AC new generation LED T-8 Retro fit for multipurpose aplication with LED rod, made from extruded aluminium housing, polycarbonate diffuser including all fixing accessories & connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified & directed.

S&F exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and as directed. Note: cost of making hole, fitting of exhaust fan and making good the disturbed surface with plaster & painting shall be deemed to be included in the quoted rate.

S&F single pole and neutral sheet metal enclosures with a two pin and earth plug and socket 240 V, 230 volts, 50 HZ complete with one single pole MCB 20 A complete all as specified & directed.

M&L for submain wiring with 2 runs of copper conductor FRLS PVC insulated unsheathed cable 1100 volt grade 4 sqmm drawn through PVC conduit 25mm dia ISI marked as per IS specification fixed concealed in wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 4 Sqmm FRLS multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified. Note : Two runs of 4 sqmm cable alongwith one run of 4 Sqmm PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length, complete all as specified & directed..

S&F sheet metal enclosures for MCB distribution board 415 Volts triple pole and neutral 4 way double door type flushed inside the wall with 200 Amp rated bus bar incl making the surface good complete all as specified.

S&F sheet metal enclosures for MCB distribution board 415 Volts single pole and neutral 8 way double door type flushed inside the wall with 200 Amp rated bus bar incl making the surface good complete all as specified & directed.

S&F MCBs 240/415V 10KA fingerproof terminal, C Curve bi-connect termination, label holder, 35Sqmm terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB., complete all as specified & directed. Note : DB shall be measured and paid separately.

MCB SPN 32 Amps, complete all as specified & directed.

MCB SP 5 to 32 Amps, complete all as specified & directed.

MCB TPN 63 Amps, complete all as specified & directed.

Supply,installation and testing of 5 star rated electric water heater (Geyser) metal body storage type of 25 ltrs capacity of Steel tank inclding 04 nos anchor fastining for mounting geyser and other nut,bolt and washers with 3 core flexible wire of size 2.5 Sqmm from Geysere to metal plug and socket complete all as specified & directed.

Supply and laying pipe galvanized, “Medium class”, including fittings, 40 mm (1.5”) dia, complete all as specified & directed.

S & F Gun metal globe or gate valve (ISI marked), with iron wheel head, screwed both ends, suitable for 25 mm bore iron pipe and fixed including testing complete all as specifed and directed by Engr-in-Charge.

Supply and laying pipe galvanized, “Medium class”, including fittings, 25 mm (1.0”) dia, complete all as specified & directed.

Supplying, laying and testing cable XLPE insulated screened, PVC bedded, galvanized steel strip or wire amounred, electric power cables (heavy duty) 1100 voltas grade with stranded aluminium conductor 16 Sqmm 4 core, complete all as specified and directed.

M&L for sand cushioning to cable with a layer of sand 8cm deep before laying the cable and 15cm deep after laying the cable (punned down to 18cm depth after laying and stretching of cable) complete all as specified and directed Note: Punned down thickness of 18cm shall be measured for payment purpose only.

M&L for brick protection cover of UG cable by old size bricks common burnt clay building bricks sub class `B’ laid dry and flat abutting each other with width equal to length of brick and gap between adjacent brick not exceeding 10mm complete all as specified and directed

Make bore to road/cement path/hard standing for providing GI pipe 25 mm both end socketed for passing armoured cable incl making good the disturbed surface complete all as specified & directed.

S&F GI tubing 25 mm bore light grade galavanised with all fitting complete for cable protection under road crossing/on pole/wall or similar position including taking down existing one complete all as specified & directed.

M&L for drilling/cutting of existing CI/GI/DI pipe line any type any position of size 80 to 150 mm dia including providing of tee, short piece of length up to coller etc and lead joints complete all as specified and as directed.

ANIL CONSTRUCTION CO. (BID ID -3372822)

M/s B.S.Jain (BID ID -3373158)

Swami Enterprises (BID ID -3375386)

Peerzada And Sons (BID ID -3380255)