WBPWRD/EE/BHDI/eNIT30/2526/03

Providing and fixing at or near ground level precast cement concrete in kerbs (size : 410 mm x 310 mm x width 150 mm at bottom with circular nosing at top) (Nano kerb) of cement concreat M25 Grade without reinforcement, fixing as per approved pattern and setting in position at site after preparing the bed grade and slopes by laying Cement concrete with jhama khoa (1:4:8)as per specification and direction of Engineer-in Charge including filling of joints with 10 mm thick cement morter (3:1) and back filling the vertical piece properly with earth duly compacted and curing the morter joints for atleast 3 days including cost and carriage of all materials complete

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsionpaint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. In Ground Floor:(a) One Coat

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in- Charge to be applied over acrylic primer as required.The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.In Ground floor (Two Coat), Premium 100% Acrylic Emulsion.

Supplying, fitting, fixing of New PGR by M.S.structural works with hollow section (Square or rectangular shape) conforming to IS : 806-1968 & IS: 1161-1998) as per design, drawing & direction of Engineer-in-charge complete including required earth work in excavation, fixing with ordinary cement concrete (1:2:4) with pakur variety graded stone chips finished complete as per direction of Engineer-in-charge.

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : On steel or other metal surface :With super gloss (hi-gloss) (i) Two coat (any shade except white)

SUB TOTAL

GST @ 18% over Sl. No. 1 to 18

Labour Welfare Cess @ 1% over Sl. No. 1 to 19

Please Enable Macros to View BoQ information