MISC REPAIR TO B/R NATURE WORK (FLOORING, TILING, STONE CLADDING, GRANITE WORK, JOINERY, PLUMBING, ROOF TREATMENT ETC), CLEANING OF SERVICE WATER TANK AND CONNECTED WORKS AT ZONE A KWC LABS AND MISC REPAIR TO DRAIN, DRAIN COVER, PAVED AREA AND OTHER

Amount

Dismantling stone slabs and tiles of any description or thickness in floors, aprons laid dry or in any type of any mortar complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings etc not exc 15 cm thick above or below ground level complete all as specified and directed.

M&L 100 mm thick PCC 1:4:8 type D-2,(40mm graded stone aggregate) as in subbase floors, filling and mass concrete etc complete all as specified and directed.

BLANK

M&L for coloured Rubber moulded precast concrete interlocking paver block ,prepolished of any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade, over and including 25mm thick sand cushioning complete all as specified and directed.

M&L for coloured Rubber moulded precast concrete interlocking paver block ,prepolished of any shape and size with grey cement and pigment confirming to IS 15658-2006 of 80 mm thickness M-40 Grade, over and including 25mm thick sand cushioning complete all as specified and directed.

S&F factory made chequered cement concrete coloured tiles 200mm x 200mm x 25mm thick, set jointed and pointed in neat cement slurry and pointed with grey cement mixed with pigment to match the shade of tiles, laid over and including 20mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for factory made pre-polished coloured chequered cement concrete tiles 30cm X 30cm X 25mm thick set, jointed and pointed in neat cement slurry and pointed with grey cement and pigment to match the shade of tiles in floors over and including 20mm thick screed bed or bedding layer in CM 1:6 including demolition of old tiles complete all as specified and directed.

M&L machine cut Granite stone slab 15 mm thick fixed for steps, pillars, window cills, cooking platforms, labs counters for experimental work and like and including 15mm thick (avg thickness) cement mortar 1:4 screeding and setting coat in cement mortar 1:2, 3mm thick, set and jointed with white/coloured cement to match the shade of slab incl cutting, waste, rubbing and polshing etc complete all as specified and directed. Note:- (i) The rate of granite stone shall be deemed to includng for full rounding off corner/edges incl all cutting to make it square or rectangular. (ii) The rate shall also be deemed to including for cutting and polishing machine and granite polishing to achive the desired granite finish.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with CM 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not be more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L for preparation of new concrete surface over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L for preparation of old painted concrete surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius in CM 1:4 including manhole raising, footpath, etc complete all as specified and directed.

Taking down cement plaster/grit plaster of any description on brick/concrete surfaces etc including raking out joints hacking for key, scrubing down with water etc complete all as specified and directed.

M&L 15mm thick plaster in CM 1:6 on fair faces of new or old brick works or concrete work surface finished even & smooth without using extra cement complete all as specified and directed. Note :- The quoted rates shall be deemed to be inclusive of scaffolding up to G+5 storey and safety net to be installed at site.

M&L 15mm thick plaster in CM 1:4 on other than fair faces of brick work or concrete work, finished even & smooth without using extra cement complete all as specified and directed. Note :- The quoted rates shall be deemed to be inclusive of scaffolding up to G+5 storey and safety net to be installed at site.

M&L 5mm thick plaster in CM 1:3 on concrete surface of chajja, ceiling etc finished even & smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper (white or tinted) over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of new plastered wall surfaces and applying two coat of acrylic exterior emulsion premium quality over and including a coat of acrylic water based primer (tint and pattern as approved by GE) complete all as specified and directed.

M&L preparation of new plastered surfaces of ceiling and applying two coat of oil bound distemper(white or tinted) over a coat of alkali resistant primer, complete all as specified and directed.

M&L for Complete removal of existing treatment including preparation of plastered or unplastered old decorated surfaces of walls including pillasters and cornices etc. including washing, rubbing down and stopping the previously treated surfaces and applying two coat of oil emulsion distemper of approved shade/tint over and including 1 mm thick wall care putty complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall (plastered or un-plastered) including cornices, pilaster etc by brooming down with steel wire brushing, scraping down, smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat distemper oil bound emulsion (white or tinted) on walls complete all as specified and directed.

M&L for Complete removal of existing treatment including preparation of plastered or unplastered old decorated surfaces of walls including pillasters and cornices etc. including washing, rubbing down and stopping the previously treated surfaces and applying two coat of acrylic emulsion exterior quality over and including a coat of water based primer (tint and pattern as approved by GE) complete all as specified and directed. Note:- The quoted rate shall be deemed to be inclusive of scaffolding upto G+5 storey and safety net to be installed at site.

M&L complete removal of existing treatement on wall surface with sand paper, iron patti or grinder, including pillasters and cornices etc.and applying two coat of interior acrylic emulsion paint over a coat of 1 mm thick wall care putty to achieve smooth finish complete all as specified and directed.

M&L complete removal of existing treatement on ceiling surfaces with sand paper, iron patti or grinder, incl pillasters and cornices etc by brooming down with steel wire brushing, scraping down, smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying two coat of white wash complete all as specified and directed. Note:- The quoted rate shall be deemed to be inclusive of scaffolding upto G+5 storey and safety net to be installed at site.

M&L preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint of tint / shade as approved complete all as specified and directed.

M&L for preparation of old painted steel or iron surfaces of any description over 10cm width or girth and applying two coat of synthetic enamal paint of tint as approved complete all as specified and directed.

M&L Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels made by wooden beads with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified including using white cement in place of grey cement for grit wash complete all as specified and directed. Note:- The quoted rate shall be deemed to be inclusive of scaffolding upto G+5 storey and safety net to be installed at site.

Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and directed. Note:- The quoted rate shall be deemed to be inclusive of scaffolding upto G+5 storey and safety net to be installed at site.

Demolition of reinforced cement concrete as in RCC slabs, drains or manhole covers of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for Precast RCC work (Nominal Mix) (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in slabs supported on walls, man hole cover ,drain covers with perforated hole, Shelves etc and like complete all as specified and directed.

M&L mild steel TMT bar 10 mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick surface flat for rough finished surface of concrete complete all as specified and directed.

Use & waste of form work to to edge of concrete flats etc exc 10 cm but not exc 20 cm wide/thick for fair finished surface of concrete complete all as specified and directed.

S&F Factory made precast heavy duty drain/ manhole covers including MS frame and including reinforcement as per IS 12592 : 2002 with specified thickness including dismantling old manhole covers complete all as specified and directed.

Repair to rolling shutter push type with necessary repair work of defective parts i.e, re posting of laths, riveting to old defective rivets, tightning nuts and bolts, replacement of spring, greasing to movable parts and at guide channel including taking out and re-fixing rolling shutter for smooth functioning size of rolling shutter not exceeding 6sqm each complete all as specified and directed. Note :- The defective parts to be repaired are deemed to be included in quoted rates.

S&F in repairs mild steel plain sheets covering to door shutter and top cover of rolling shutter cover of specified thickness cut to size, edges beaded as directed, holes punched complete all as specified and directed.

Removing Debris/ demolished materials by mechanical means including loading, transporting, unloading to outside Mod land from 5KM upto 20KM lead at approved municipal dumping ground complete all as specified and directed.

Desilting and cleaning of open drains of any section manually including desilting soild/semi solid materials of any type vegetation growth and removal of sludge upto a distance exc 5.00 KM from the edges of drains etc complete all as specified and directed.

Cleaning and removing all scale and dirt etc, from water tanks, capacity exceeding 250 litres but not exceeding 500 litres and from mouths of circulating pipes etc. by emptying, drying, cleaning by scrubbing the dust with wire brush from tank by removing inlet and outlet pipe and refixing inlet and outlet pipe with new tank connection fitting in the same position after cleaning complete all as specified and directed.

All as per item Ser No 41.00 above but capacity exceeding 500 litres but not exceeding 1000 litres.

S&F in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod &high density plastic ball screwed for iron pipe and fixed for 15 mm bore pipe, complete all as specified and directed.

S&F in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod &high density plastic ball screwed for iron pipe and fixed for 20 mm bore pipe, complete all as specified and directed.

S&F 15mm bore GI tubing "medium grade" galvanized with and including all fittings complete to walls and ceiling or laid in floors including taking out old unserviceable GI tubing complete all as specified and directed.

S&F 20mm bore GI tubing "medium grade" galvanized with and including all fittings complete to walls and ceiling or laid in floors including taking out old unserviceable GI tubing complete all as specified and directed.

S&F 25mm bore GI tubing "medium grade" galvanized with and including all fittings complete to walls and ceiling or laid in floors including taking out old unserviceable GI tubing complete all as specified and directed.

S&F in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both ends for iron pipe and fixed,screwed down, high pressure screwed ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F 500 litres capacity Rotational moulded polyethylene water storage tanks triple layered triple layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including taking out old unserviceable water tank and removing from site complete all as specified and directed.

S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including taking out old unserviceable water tank and removing from site complete all as specified and directed.

S&F in repair PVC water tank cover for 500 / 1000 litre capacity complete all as specified and directed. Make :- Sintex, Polycon, Sheetal

M&L for clearing away all vegetation, splings, shrubs, brushwood , undergrowth, digging out roots, filling holes and levelling ground, stacking of serviceable material and trees not exceeding 30 cm girth and removing rubbish outside the MOD periphery of the area under clearance complete all as specified and directed. Note:- (a) The cleaning of vegetable/brushed growing to be cleaned upto 6(Six) storey and making good with PCC 1:2:4 type B1 and finishing the surface to match the existing surface. (b) Rate also includes for necessary scaffolding, tools & plants to carry out the job upto a height G+6 floor.

S&F CPVC pipes 16mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of old unserviceable pipes and fittings complete all as specified and directed.

S&F of CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of old unserviceable pipes and complete all as specified and directed.

S&F CPVC Brass Elbow fitting suitable for CPVC pipes 16mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified and directed.

S&F CPVC Brass Elbow fitting suitable for CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified and directed.

S&F CPVC Brass TEE fitting suitable for CPVC pipes 16mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified and directed.

S&F CPVC Brass TEE fitting suitable for CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified and directed.

S&F CPVC Brass UNION fitting suitable for CPVC pipes 16mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified and directed.

S&F CPVC Brass UNION fitting suitable for CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified and directed.

S&F toughened glass for urinal partition etc 10 mm thick etched glass of size 600 x900mm with support of CP frame fancy type as approved by GE including taking out old unserviceable portition complete all as specified and directed.

S&F in repair urinal pot sensor type half stall flat back of size 600x400x460mm incl waste fittings, Bottle trap, Battery etc complete all as specified and directed. Make:- Parryware Cat part no:- C8097 or equivalent in Cera, Hindware as approved by GE.

S&F in repair Viterious China urinals, bowl type(back or corner wall type) ofsize 465X355X265 mm,complete including providing and fixing plugs,bedding urinal against wall in Cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws,pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe,grating and Union for discharge pipe complete all as specified and directed.

S&F in repair vitreous china Urinal, Half stall type white (excluding flushing cistern, flush pipe and waste pipe) including connections to flushing pipe and outgoing pipes fixed in repairs. complete all as specified and directed.

S&F in repair urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimun weight 60 gms) complete all as specified and directed.

Dismanting floor hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.

M&L for non-skid, 1st quality ceramic coloured tiles 7 to 8mm thick (Square/rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors, set and jointed in cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including screed bed or bedding layer 15mm thick in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic designer coloured tiles of size 450x300x 7 to 8 mm thick on vertical surface as in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and directed.

M&L for vitrified (light shade) tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry, and pointed in white or coloured cement to match the shade of tile over and including 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

M&L for vitrified (light shade) tiles 9 to 10 mm thick (square/ rectangular) polished as in skirting/vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10 mm rendering in CM 1:4 complete all as specified and directed.

Taking down chowkhats with shutter without taking off shutters from the frames (area n. exc. 1.50 sqm each) including making good the disturbed surfaces complete all as specified and directed.

Taking down chowkhats with shutter without taking off shutters from the frames (area exc. 1.50 sqm but n. exc. 4.00 sqm each) including making good the disturbed surfaces complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm from chowkhat and removing to or from store as required complete all as specified and directed.

Taking down and Easing of Aluminium door shutter of any size for smooth opening/closing by tightening of butt hinges in position including changing of unserviceable existing butt hinges, adjustment of butt hinges in position, replacement of existing unserviceable mongery, builder hardware, welding work etc. and re-fixing in same opening making fully functioning complete all as specified and directed.

Taking down and Adjusting / repairing of Aluminium window shutters of any size for smooth opening/closing by tightening of butt hinges in position including changing of unserviceable existing butt hinges, adjustment of butt hinges in position, replacement of existing unserviceable mongery, builder hardware, welding work etc. and re-fixing in same opening making fully functioning complete all as specified and directed.

M&L for pressed steel frames for doors of size 125 x 60 mm for doors with one or more rebate including necessary fixing lugs, hinges, lock, strike plates of 50 x 3mm welded with frame and making arrangement for fixing of door spring etc complete all as specified and directed.

M&L for pressed steel frames for doors of size 105 x 60 mm for doors with one or more rebate including necessary fixing lugs, hinges, lock, strike plates of 50 x 3mm welded with frame for making arrangement for fixing of door spring etc complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out 5mm plain colour PVC sheets re-inforced with MS square tube complete all as specified and directed

S&F glazed and gauged skeleton shutters 35mm thick, 2nd class hard wood 'Hollock' open rebated and prepared to receive glass, gauge etc (with sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc incl priming coat. The size of member of shutters as specified in SSR Part-1 Section 8 clause 8.20 (b) incl kiln seasoned and chemically pressure treated, complete all as specified and directed.

S&F 30mm thick flush shutter solid core construction with block board core and ply wood face panels commercial type on both sides complete all as specified and directed.

M&L factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail & bottam rail . paneling of plain colour PVC sheets to be filted in MS frame welded, sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with the solvent cement complete all as specified and directed.

S&F Mild steel butt hinges medium weight , clod rolled, 100mm, ISI marked, complete all as specified and directed.

M&L barrel tower bolts aluminium anodised extruded section of size 200 mm complete all as specified and directed.

S&F aluminium fabricated type extruded handles of size 150mm complete all as specified and directed.

S&F 300 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections, bolt not less then 12mm dia with and including a minimum of 6 bolt and nuts ,fixed on plate or staple plate complete all as specified and directed.

S&F Stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18mm including fixing to wooden/steel frames with tinned tacks or galvanised wire or wooden bead complete all as specified and directed.

M&L prepapration of new or previously untreated surfaces of wood or based materials of any description not otherwise described, over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for providing Water proofing treatment to roof as under:- (a) Complete removal of existing roof treatment including brick tile, mud fusca,PCC padding,cowa, lime concrete etc up to any thickness and depth of original roof slab and Clean up to existing RCC roof by steel wire brushes and surface washed with clean water and complete all as specified and directed. Note:- All Demolished material / mud phuska sand/ brick tiles will be taken by the contractor out side of the Defence land exc 10 KM but not exc 20 KM run in approved municipal dumping ground without any extra cost to the govt. Contractor should quote his rate Keeping this Aspect in mind. (b) M&L 15 mm thick plaster in CM 1:4 over concrete surfaces of roofs finished even and smooth with WPC @ 3% by weight of cement. ( WPC will be measured and paid seperately) (c) Applying a coat of approved bituminious primer @0.25 ltr/Sqm and allow to dry conforming to IS: 3384-1965. (d) Applying bonding coat with one coat of hot blown bitumen grade 85/[email protected]/Sqm. (e) Supplying and laying APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/Sqm ) laid on by torch forced application.The over lap shall be minimum 100 mm on transverse direction and 75 mm in longitudinal direction and 100mm overlap on all vertical surfaces/dado/parapets etc and sealing the overlaps by heating and fusing the layer of asphalt and melting the protective plastic film. (f) Applying bonding coat with one coat of hot blown bitumen grade 85/[email protected]/Sqm. (g)M&L for 30x30x 20 to 22 mm thick Precast cement concrete tiles type B-1, 1:2:4 (10mm to 12.5mm graded stone aggregate) slab flooring, bedded over and including screed bed 15 mm cement mortar 1:4 , and pointed in cement mortar 1:3. all as specified and directed by Engr-in- charge. Note : (i) The water proofing treatment shall be carried out by authorized approved applicators/agency of A.P.P. based polymeric membrane as approved by GE.(ii)Application of polymeric membrane shall be done by torch application. (iii)Primer shall be applied after preparing and cleaning of fully dried cement plastered surface

M&L for Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections weighing not less than 0.55Kg/m shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the direction of complete all as specified and directed.

S&F anodised aluminium powder coating aluminium section weighing not less than 0.55Kg/m (minimum thickness of powder coating 50 micron)frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S & F Powder coated aluminium door shutters,aluminium section weighing not less than 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beading screws, and all necessary builder hardware etc complete all as specified and directed.

S&F Powder Coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws and all necessary builder hardware etc complete all as specified and directed.

S&F aluminium section powder coated (powder coating not less than 50 micron thick) grill of size 6 x 4.5 mm thick section 10cm centre to centre spacing fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles complete with U-channel all around fixed in window with screws complete all as specified and directed.

S&F 12 mm thick prelaminated particle board exterior grade with decorative prelaminated both sides of approved shades fixed to aluminium shutters/partitions etc complete all as specified and directed.

S&F 4.8 mm thick sheet glass ordinary quality, area exc 0.50 Sqm each pane and fixing by means of glazing pins and rubber beading etc in aluminium partitions, windows, doors etc complete all as specified and directed.

S&F 4.8 mm thick sheet glass ordinary quality, area not exc 0.50 Sqm each pane and fixing by means of glazing pins and rubber beading etc in aluminium partitions, windows, doors etc complete all as specified and directed.

S&F designer glass film of approved pattern 25 micron reflective type with designer etching, LOGO of labs etc and similar work sticked to glass panes of doors, windows, partitions etc as per manufacturer's instructions complete all as specified and directed.

S&F in repair door closer hydraulically regulated, aluminium body designation No 3, universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stailess steel cover, governing pivot made of brass, other parts made of mild steel heavy duty fixed complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall including fixing clamps as required complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) bends with rubber ring joints complete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including fixing clamps as required complete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) bends with rubber ring joints fixed as required complete all as specified and directed.

Cutting chases, pining in making good to facings where required & pointing in cement mortar1:3 to ends etc or edges of landings, steps cills,sunshades, shelves,lintels,etc and cutting chases for concealed water tubing and making good,cutting n.exc. 10cm girth in brick walls complete all as specified and directed.

S&F in repair 15mm bore pillar tap long neck,cast copper alloy, with capstan heads, chromium plated, screwed down high pressure,with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.

S&F in repair long body Bib taps,chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, suitable for 15mm bore pipe complete all as specified and directed.

S&F in repair angle stop valve, brass chromium plated,screwed down, high pressure with crutch or butterfly handle screwed for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed.

S&F in repair angle stop valve 2-in-1 type, brass chromium plated,screwed down, high pressure with crutch or butterfly handle screwed for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed.

S&F in repair 15mm dia PVC connection with brass nut, of length 450mm, complete all as specified and directed.

S&F in repair brass chromium plated Health faucet with 1.20 m flexible chromium plated tube and hook fixed to angle valve 15mm bore with accessories complete all as specified and directed.

S&F in repair brass Chromium plated jet spray with CP connection pipe for EWC, 15mm bore with fittings, complete all as specified and directed.

S&F in repair vitreous china pedestal pattern, "EWC" white with connection to trap, and to flushing pipe anti-syphonage pipe and including sheet cover and CP jet etc complete all as specified and directed.

S&F in repair PVC valveless syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC bend for required squat pattern etc, set with concrete and making good to floor, fixed as in repairs complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white flat back, size 550mm x 400mm including pillar tap of chromium plated with capstan head with long screwed shanks and fly nuts, brass chromium plated waste coupling 32mm dia, with fly nuts, pvc waste pipe and MS brackets 25x25x5 mm thick incl cutting for and pining in ends of brackets, fixed as in repairs complete all as specified and directed.

S&F in repair Plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F grating droom of size 100/125/140 mm CP in round or square shape for out let of water etc complete all as specified and directed.

M&L Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains;hand made sliding bolts; clamps;hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position including any type of roof treatment, mud phuska, PCC padding,lime concrete etc. up to any thickness and Clean up to existing RCC roof by steel wire brushes and surface washed with clean water and complete all as specified and directed. Note:- All Demolished material / debries will be taken by the contractor out side Defence Area without any extra cost. Contractor should quote his rate Keeping this Aspect in mind.

Cutting grooves in brick wall, for inserting APP membrane and other works. 75mm wide and 65mm deep and shaping horizontal face of grooves and making good with cement mortar 1:3 or PCC 1:2:4. complete all as specified and directed.

Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hotmixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and directed.

M&L PCC 1:3:6 type C1 using (20 mm graded stone aggregate) as in mass concrete over roof as in padding incl cement slurry over old RCC surface, surface fair finished even & smooth without using extra cement complete all as specified and directed.

M&L 15 mm thick plaster in CM 1:4 over concrete surfaces of roofs finished even and smooth with WPC @ 3% by weight of cement ( WPC will be measured and paid seperately) complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/Sqm ) laid on and including primed surfaces of btuminious primer of hot applied industrial bitumen 85/25 at the rate of 1.2 kg per Sqm, by torch forced application complete all as specified and directed.

M&L for 20 to 22 mm thick Precast cement concrete tiles type B-1, 1:2:4 (10mm to12.5mm graded stone aggregate) slab flooring, bedded over 15 mm CM 1:4, and jointed in CM 1:4 and pointed in CM 1:3. complete all as specified and directed.

Disconnecting existing tanks, of 500 Ltr Capacity , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position after Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes including refixing of float valve of any dia complete all as specified and directed.

M&L for repairing of soffit and sides of RCC slab/chajja and similar works by dismantling of loose/ disintegrated portion of RCC at any height and in any situation (including provn of support, formwork and welding of reinforcement with weld mesh of weight not less than 3 kg/ sqm and dubbing 1st coat of 20 to 25mm thick in cm 1:3 finished rough and finishing coat of 10mm thick in cm 1:3 finished even and smooth without using extra cement after applying cement slurry @ 3.00 Kg/Sqm and applying two coats of white wash complete all as specified and directed. Note : - (i) Unit rate of this items includes the cost of scaffolding, form work, necessary water proofing agent etc and nothing extra shall be paid on account of variation if heights. (ii) The measurement of finished plaster of 2nd coat provided on surface in sqm shall be the mode of measurement aganst this item.

M&L for repairing of RCC projection, chajjas, facia, bands, shelves, beams, RCC railing, balcony and similar works by dismantling of loose/ disintegrated portion of RCC at any height and in any sitution / floor (including provn of support, formwork and welding of reinforcement if required with wire mesh of weight 3 kg/ sqm and dubbing/ filling with PCC (1:2:4), type B-0, using 12.5 mm graded aggregate, 15 to 25 mm thick after applying cement slurry @ 3 kg/sqm, finished even and smooth to desired shape and applying two coats of wheater proof emulsion paint to match with existing surfaces complete all as specified and directed.

S&F in repair vertical venetian blinds consisting of Aluminium head rail with vanes/louvers/flip cover 100mm wide of approved tint/shade and traverse coard complete fixed in position complete all as specified and directed.

S&F in repair double rolling vertical blinds consisting of aluminium head rail with flip cover of approved tint/shade and traverse cord complete as per manufacturer instruction fixed in position complete all as specified and directed.

Sree Ram Enterprises