REPAIR TO JOINERY IN CERTAIN MD ACCN AT SOUTH OF RLY LINE UNDER GE MISSAMARI

Amount

Taking down Chowkhats or frames not exc. 1.5 sq. m each but with shutters (without taking off shutters from the frames)complete all as specified and as directed.

Taking down Chowkhats or frames exc 1.5 sqm and not 4.00 sq. m each but with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down Shutters of any description exc 1.00 sqm and not 2.00 sq. m complete all as specified and as directed.

Taking down Shutters of any description not exc 1.00 sqm complete all as specified and as directed.

Taking down Shutters of any description exc 1 sqm and not exc 2.00 sqm and refixing in the same opening complete all as specified and as directed.

S&F Pressed steel frames for doors with one or more rebates,1.25mm thk cold rolled mild steel sheet, size of frame 125 x 60mm including necessary fixing lugs, hinges, lock strike plate,etc., complete all as specified and as directed.

S&F Pressed steel frames for doors with one or more rebates,1.25mm thk cold rolled mild steel sheet, size of frame 105 x 60mm including necessary fixing lugs, hinges, lock strike plate,etc., complete all as specified and as directed.

M&L providing plain cement concrete type C-1, (1:3:6), (using 20 mm graded stone aggregate), as in fixing of hold fast, back filling of pressed steel door frame including necessary form work as required complete all as specified and directed.

S&F 35 mm thick factory made 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, sizes of members of shutters as specified in SSR Part -I. section 8, clause 8.24(a), complete all as specified and as directed.

S&F 35 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F powder coated (minimum thickness of poweder coating 50 micron) anodised aluminium frame for doors, windows, ventileters with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

S&F anodised aluminium three track sliding window shutters (weight of section not less that 0.55 Kg/RM) aluminium section without sash bar aluminium section including all necessary joining cleats,hold fast, rubber gasket anodised snap beading, anodised aluminium fittings, suitable aluminum handle and locking arrangement etc, two track for glass and one track for aluminium wire mesh etc, including powder coated of any colour (thick of power coating not less than 50 micron) complete all as specified and directed. Note:- (i) Wire cloth /glass shall be measured and paid separately under appropiate items. (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed (iii) Fixing of shutters with fittings shall be as per manufacturers instructions.

S&F Powder coated Anodised aluminium (minimum thickness of powder coating 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as directed. Note:-(i)Glass/wire guage as required shall be measured and paid seperately under appropiate item (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed (iii) Fixing of shutters with fittings shall be as per manufacturers instructions.

S&F Powder coated Anodised aluminium (minimum thickness of powder coating 50 micron) ventilators having half fixed with 4mm thick frosted glass and half fixed with louvers with 4mm thick, 100mm wide frosted glass, (louver frame made up of 62mm/29.5mmx 1.5mm thick) complete all as directed Note:-(i)Glass as required shall be deemed to be inslusive of Unit quoted rate. (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed. (iii) Fixing of shutters with fittings shall be as per manufacturers instructions.

S&F 5.5mm thick plain sheet glass,ordinary quality fixed with Aluminum frame work exc 0.5 sqm in each pane complete all as specified and as directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples fixed with Aluminum frame work complete all as specified and as directed.

S&F Solid PVC door frame of size 50mm x 95mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing specified in SSR Part I, Section 8 complete all as specified and as directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), wood free EPS, with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing specified in SSR Part I, Section 8 complete all as specified and as directed.

S&F Second class hard wood scantling, timber fixed, wrought complete all as specified and directed.

S&F in repair, 18/19mm thick PVC board, 100% Lead free, density not less than 600 Kg/Cbm, prelaminated one side & other side balancing white, as in kitchen cabinet, shelves including 30mm (Width of flaps when opened) Continuous (piano) hinges,mild steel, bright finish or electrogalvanised, magnetic catcher 01 Nos per shutter, 01 Nos. 100mm Stainless steel handle complete all directed.

S&F in repair, stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples GI wire stapple complete all as specified and directed.

S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or revited, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290. Gde-E-165, including necessary prepration of surface and applying a coat of red oxide zinc chrome primer and dismantling existing unserviceable MS sections complete all as specified and directed.

S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S&F 75mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.

S&F 100 mm Extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

S&F 150 mm Extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section, complete all as specified and directed.

S&F 100mm long aluminium anodised barrel tower bolts of extruded section, complete all as specified and directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

S&F 150mm (overall length of cover plate) Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F in repair 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

S&F Anodised aluminium snap grid frame work for false ceiling,Size of grid 605 x 605mm, (size of main runner 39x24.7x0.8mm, cross Tee 29x24.7mmx0.8mm, wall flange 22.2x22.2x0.65mm) hanging with 4mm dia GI wire suspenders from roof, ‘J’ hooks bolts and nuts etc, with and including 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to Aluminium framework with screws,complete all as specified and directed.

S&F stainless curtain rod of 20mm dia thickness not less than 0.75mm, fixed with curtain rod holder fixed in walls with screws and finials caps complete all as specified and directed. Note: Curtain rod holder and finials caps is deemed to be inclusive in the Unit rate quoted rates)

Taking down cement plaster on wall & ceiling of any description including racking out joints, hacking for key and scrubbing down with water etc complete including removing debries of the site complete all as specified and as directed.

M&L rendering 20mm thick with cement mortar 1:4 on fair faces of brick work in two layers (10mm and 10mm) seperately mixed with and including water proofing compund in top layer as per manufacturers instruction and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 for finished even and fair complete all as specified and as directed.

M&L preperation of new plastered surfaces of walls and applying three coats of white wash,complete all as specified and as directed.

M&L preparation of new wall surface applying Two or more coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and directed.

M&L preparation of new wall surface applying Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm complete all as specified and directed.

M&L Preparation of new or previously untreated wood surfaces of any description, over 10 cm width or girth, not otherwise described appling applying two coat of synthetic enamel paint over one coat of pink primer,complete all as specified and directed.

M&L preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L preparation of old wall surface applying one coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames glazed with putty or fixed with beads complete all as specified and directed.

S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debries/ rubbish from the site complete all as specified and directed.

M&L Glazed ceramic coloured tiles in vertical surfaces 450x 350x 7 mm thick set and jointed in neat cement slurry & pointed in white or colour cement to match including backing coat 10 mm thick in Cement Mortar 1:4, complete all as specified and directed.

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including 15 mm thick Screed bed or bedding layer of cement mortar 1:6, for laying floor finishes, complete all as specified and directed.

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including 15 mm thick Screed bed or bedding layer of cement mortar 1:6, for laying floor finishes, complete all as specified and directed.

M&L Light coloured Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick Screed bed or bedding layer of cement mortar 1:6, for laying floor finishes, complete all as specified and directed.

M&L Light coloured Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick Screed bed or bedding layer of cement mortar 1:4, complete all as specified and directed.

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured including 10 mm thick Screed bed or bedding layer of cement mortar 1:4 complete all as specified and directed.

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured including 10 mm thick Screed bed or bedding layer of cement mortar 1:4 complete all as specified and directed.

M&L for 18-20mm thick Granite (of any type) Slab machine cut, single piece in kitchen platform (projected from the edge of the slab upto the extant as directed by Engg-In-Chage), moulding/rounding the edges of the slab with groves at bottom as drip course including provision of suitable size hole for inserting LPG gas pipe into granite slab and RCC base slab also laid over and including 20mm thick backing layer in cement mortar 1:4 and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including neccessary Dismantling existing unserviceable Stone slabs and tiles of any description or thickness. laid bedded and pointed in any mortar complete all as specified and as directed.

Demoliation of cement Concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L 25mm thick cement concrete (1:2:4) type B-1( using 20mm graded crushed stone aggregate) as in sub base of floor finished even and fair complete all as specified and directed.

Saraswati Auto Works (BID ID -3381274)

shree kamakhya traders (BID ID -3385392)

Shree Krishna Traders (BID ID -3386720)

MS Awash Ghosh and Brothers (BID ID -3381328)

M/S Singha Enterprise (BID ID -3379819)

M/S S.S.Corporation (BID ID -3383080)

M/S Mahabir Traders (BID ID -3381515)