MAINTENANCE AND REPAIRING WORK OF VARIOUS MUNICIPAL BUILDINGS IN TPS NO.20,68,51,92 & NEWLY ADDED VILLAGE AREA(KATHODARA,LASKANA,KHADSAD)IN NEW EAST (SARTHANA)ZONE,SURAT.

NAME OF WORK :- MAINTENANCE AND REPAIRING WORK OF VARIOUS MUNICIPAL BUILDINGS IN TPS NO.20,68,51,92 & NEWLY ADDED

VILLAGE AREA(KATHODARA,LASKANA,KHADSAD)IN NEW EAST (SARTHANA)ZONE,SURAT.

SN ITEM Qty Unit Total

Excavation for foundation includ.sorting out & stacking of useful

materials & disposing of the excavated stuff upto 50 mt. Lead & all

lift, watering etc. Comp. (A) Loose or Soft soil Executed With

1 Mechanised Efforts / Machinaries

(1) Up to 1.5 Mt. depth 10 117.26 C.M.

Excavation for foundation includ.sorting out & stacking of useful

materials & disposing of the excavated stuff upto 50 mt. Lead & all

lift, watering etc. Comp. (A) Loose or Soft soil Executed With Manual

(1) Up to 1.5 Mt. depth 5 203.83 C.M.

Providing & Laying C.C1:5:10 (1cement :5coarse sand :10 graded stone

3 agg. 40 m.m Nominal size )& curing comp. excl. cost of from work in 5 2,517.44 C.M.

:Foundation & Plinth

Providing & laying cement concrete 1:4:8 (1 cement:4 coarse sand:8

4 graded stone agg. 40 mm nominal size) & curing comp. excl.cost of form 5 2,680.21 C.M.

work in (A) Foundation and Plinth

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed stone

5 agg 20m.m Nominal size)&curing comp. excl. cost of form work in :(a) 5 3,005.76 C.M.

foundation & Plinth

Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 sand:3

graded stone agg. 20 mm nominal size)& curing comp. Includ.cost of form

work but exclu. Cost of reinforcement for reinforced concrete work in :

(A) Foundation, footing, Base of columns and Mass concrete.

Filling available excavated earth (excluding rock) in trenches. plinth,

7 sides of foundations etc. in layers not exceeding 20 cm. in depth 50 130.39 C.M.

consolidating each disposited layer by ramming and watering.

Filling in foundation and plinth with murrum or selected soil in layers of

8 20cm. thickness including watering, ramming and consolidating etc. 100 289.06 C.M.

Providing & laying ordinary cement con.1:1.5:3(1cement:1.5sand:3

graded graded stone agg. 20 mm nominal size) finishing smooth

9 curing etc. comp. Incl.. Cost of form work but excl. Cost of reinforcement

for R.C.C. Work in :

(1)Having c/s area up to 0.08 s.mt- Ground Floor 7 12,632.60 C.M.

First Floor 3 12,672.24 C.M.

Second Floor 3 12,711.88 C.M.

Terrace (third) Floor 0 12,751.53 C.M. -

(2) c/s area more than 0.08sq. mt. & upto 0.12 sq.mt - G.F 7 11,166.97 C.M.

First Floor 3 11,206.61 C.M.

Second Floor 3 11,246.25 C.M.

Terrace (third) Floor 0 11,285.89 C.M. -

(3) Having cross sectional area more than 0.12 sq. mt. -- G.F 7 9,201.68 C.M.

First Floor 3 9,241.32 C.M.

Second Floor 3 9,280.96 C.M.

Terrace (third) Floor 0 9,320.61 C.M. -

(1)Having c/s area up to 0.08s.mt- Ground Floor 7 9,102.61 C.M.

First Floor 3 9,142.25 C.M.

Second Floor 3 9,181.89 C.M.

Terrace (third) Floor 0 9,221.53 C.M. -

(2) Having c/s area more than 0.08 s.m. & upto 0.12 s.m - G.F 7 8,174.41 C.M.

First Floor 3 8,214.05 C.M.

Second Floor 3 8,253.69 C.M.

Terrace (third) Floor 0 8,293.33 C.M. -

(3) Having cross sectional area more than 0.12 sq. mt. -- G.F 7 7,086.88 C.M.

SN ITEM Qty Unit Total

First Floor 3 7,126.52 C.M.

Second Floor 3 7,166.16 C.M.

Terrace (third) Floor 0 7,205.81 C.M. -

(2) Slabs having more than 8cm. and upto 10 cm. Th'.- G.F 10 7,984.42 C.M.

First Floor 3 8,024.06 C.M.

Second Floor 3 8,063.70 C.M.

Terrace (third) Floor 0 8,103.34 C.M. -

(3) Slabs having more than 10 cm. & upto 13 cm. Th'.- G.F. 10 7,396.96 C.M.

First Floor 3 7,436.60 C.M.

Second Floor 3 7,476.24 C.M.

Terrace (third) Floor 0 7,515.89 C.M. -

(4) Slabs having more than 13 cm. Thickness -- G.F 10 6,813.01 C.M.

First Floor 3 6,852.65 C.M.

Second Floor 3 6,892.29 C.M.

Terrace (third) Floor 0 6,931.94 C.M. -

(D) LINTELS: -- G.F 5 9,531.24 C.M.

First Floor 3 9,570.88 C.M.

Second Floor 3 9,610.53 C.M.

Terrace (third) Floor 0 9,650.17 C.M. -

(E) CHAJJAS: -- G.F 5 5,512.83 C.M.

First Floor 3 5,552.47 C.M.

Second Floor 3 5,592.11 C.M.

Terrace (third) Floor 0 5,631.76 C.M. -

Providing & laying ordinary cement con.1:1.5:3(1cement:1.5sand:3

graded graded stone agg. 20 mm nominal size) finishing smooth

curing etc. comp. Incl.. Cost of form work but excl. Cost of reinforcement

for R.C.C. Work in :

(A) Stair cases including landings etc.

Ground Floor 5 7,380.20 C.M.

10 First Floor 3 7,419.85 C.M.

Second Floor 3 7,459.49 C.M.

Terrace (third) Floor 0 7,499.13 C.M. -

(B) Vertical and horizontal fins

Ground Floor 5 10,831.75 C.M.

First Floor 3 10,871.40 C.M.

Second Floor 3 10,911.04 C.M.

Terrace (third) Floor 0 10,950.68 C.M. -

Providing & fixing IS Mark TMT Bar FE 500d reinforcement for R.C.C.

work incl. bending, binding & placing in position etc.comp.---Ground 500 76.21 Kg.

First Floor 100 77.21 Kg.

Second Floor 75 78.21 Kg.

Terrace (third) Floor 0 79.21 Kg. -

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in Cement Mortar 1:6 (1-

Cement : 6 -fine sand)(C) Fly Ash Bricks

12 Ground Floor

First Floor 10 4,786.95 C.M.

Second Floor 5 5,061.92 C.M.

Terrace (third) Floor 5 5,379.24 C.M.

Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- 25 625.53 S.M.

Cement : 4 - coarse sand ) in foundation and plinth (C)Fly Ash Bricks

Ground Floor 20 678.86 S.M.

First Floor 10 631.79 S.M.

Second Floor 5 638.04 S.M.

Terrace (third) Floor 5 644.29 S.M.

Uncoursed rubble masonary with hard stone of approved

14 quality in foundations and plinth in cement mortar 1:6 (1 Cement : 6 5 2,500.01 C.M.

sand) including leveling up etc. complete.

Providing Rubble Pitching with hard stone of approved quality in

15 cement mortar 1:6 (1 Cement : 6 Coarse sand) including leveling up 5 2,550.00 C.M.

,Curing etc. complete excluding pointing

SN ITEM Qty Unit Total

Providing and filling rubbles including hand packing and filling

16 interstices with quarry spalls behind abutments and between returns as 5 1,064.80 C.M.

Providing & Applying 10mm.th.cement plaster in single coat on

brick/ concrete walls similar surfaces for plastering & finished even &

smooth with a floating coat of cement slurry mixed with admixture

of lime or neeru in required proportion etc. comp. in C.M 1:3 (1

cement : 3sand) (A) For wall

and similar surfaces -- Ground Floor

17 First Floor 50 217.93 S.M.

Second Floor 20 246.07 S.M.

Terrace (third) Floor 0 274.20 S.M. -

(B) For ceilings &soffits of stairs

Ground Floor 100 214.60 S.M.

First Floor 50 242.74 S.M.

Second Floor 20 270.88 S.M.

Terrace (third) Floor 0 299.02 S.M. -

Providing & Applying 15mm.th.cement plaster in single coat on

brick/ concrete walls similar surfaces for plastering & finished even &

18 smooth with a floating coat of cement slurry mixed with admixture 10 237.51 S.M.

of lime or neeru in required proportion etc. comp. in C.M 1:3 (1

cement : 3sand) (A) For wall and similar surfaces -- Ground Floor

20mm thick sand faced cement plaster on walls for height more

than 10 metres above ground level consisting of 12mm thick backing

coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M.

1:1 (1-cement : 1- sand) etc. complete.

Providing 20 mm thick double coat mala cement plaster on brick /

concrete work for plastering comprising of base coat 12 mm thick

cement plaster in cement mortar (1 Cement : 4 coarse sand) in rough

finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement :

Coarse sand) finished with trovel including scaffolding curing etc.

Providing & Applying 20mm. Th. Heavy Roller plaster on walls or

similar surfaces at all floor levels consisting of 12 mm av. Th. Backing

coat of C.M. 1:3 (1 cement:3 sand) & 8 mm. th. Finishing coat of C.M.

1:1 (1 cement: 1 sand) apply thick cement slurry and apply roller

horizontal as well as vartical ( two times ) up to good quality and size of

grain in elevation as per directed by engineer incharge.

Providing throating or plaster drip and moulding it to R.C.C. chajja

etc. comp.. For all floor

Providing 20 mm deep finished groove in plaster in line and level

etc. Comp. For all Floor (M.R.)

Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or

24 L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed 50 989.45 S.M.

with grey cement slurry mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete. (A) 25mm thick

Providing and laying polished kota stone slab 25mm thick in risers

of steps,skirting Dedo and pillars laid on 10mm thick cement mortar

25 1:3 (1- Cement : 3 coarse sand) and jointed with gray cement slury 50 1,076.94 S.M.

mixed with pigment to match the shade of slab including rubbing

and polishing etc. complete.

Providing & Laying white glazed tiles 6mm. th. of Orient,

Kajaria, Jhonson,Nitco,Somani ,Bell make at all floor levels, in

26 flooring, treads of steps & landings laid on a bed of 12 mm. Av. 100 857.42 S.M.

Th.C.M.1:3(1cement :3 sand) finished with flush pointing in white

cement etc.com. For all floors

Providing & Laying white glazed tiles 6mm. th. Of Orient,

Kajaria, Jhonson,Nitco,Somani,Bell make at all floor levels in skirting

27 risers of steps & dado on 10 mm. th. C.M.1:3(1cement :3 sand) 100 887.64 S.M.

including necessary cement paste for fixing and joined with white

cement slurry etc. complete. For all floors

SN ITEM Qty Unit Total

Providing and laying Ceramic tiles 6mm thick in flooring treads of steps

28 and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3- 50 914.69 S.M.

coarse sand ) finishing with flush pointing in white cement.

Providing and laying Ceramic tiles 6mm thick in skrting risers of

29 steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3- 50 987.86 S.M.

coarse sand) and jointed with white cement slurry

Providing & laying granite slab 18mm thick in flooring, treads of

steps and landing laid on bed of 20mm thick cement mortar 1:6 (1

30 Cement : 6 coarse sand) or lime mortar 1:1.5 laid and finished with flush 50 2,410.00 S.M.

pointing in white or colour cement including rubbing and polishing

complete. ( Basic Rate:- Rs.1347.46/S.M.)

Providing & laying granite slab 18mm thick in skirting, risers of

steps, dedo and pillars laid on 10mm thick cement mortar 1:4 (1

31 Cement : 4 Coarse sand) and finished with flush pointing in white or 50 2,449.00 S.M.

colour cement including rubbing & polishing comp.. (Basic Rate:-

Providing & laying granite slab 18mm thick in Window-Door seal

Frame Etc laid on 10mm thick cement mortar 1:4 (1 Cement : 4 Coarse

32 sand) with nessary adhesive material and finished with flush pointing in 50 2,026.00 S.M.

white or colour cement, including rubbing & polishing comp.. (Basic Rate:-

33 Labour Charges For Edge Finished For Granite 100 43.43 R.M.

Providing & laying Vitrified tiles of 8mm thick of Orient, Kajaria,

Jhonson, Nitco, Somani, Bell, Asian or Euro make in flooring,treads

of steps & Landing laid on bed of 20 mm (Average) base of cement

mortar 1:6 (1 Cement : 6 Coarse sand) on new surface or fixing on

existing flooring by adhesive material including dismentaling of existing

flooring and jointed with colour cement slurry including finished with

flush pointing & cleaning the surface etc. comp.Size 24" x 24"

For Antiskid tiles

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in

flooring treads of steps and landing laid on a bed of 12mm thick cement

mortar 1:3 (1 cement : 3 coarse sand) finishing with flush pointing in

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in

36 skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1 50 1,081.71 Sqm.

cement : 3 coarse sand) and jointed with white cement slurry.

Providing & fixing 35mm.th. Flush Door Solid Double Core type Both

Face water proof Ply Vennered & 1.5 mm th.laminate shall be

pasted on both side with adhesives as specified by the manufacturers.

37 The laminate shall be as per approved shade & texture, of make incl. Sal 10 3,720.00 S.M.

wood frames of finished size 12cm x 7cm .incl. S.S. Hinges with

nessary screws & Anodized aluminum fixtures & fastenings For all

38 Same as Above But Without Frame 20 2,520.00 S.M.

Providing & fixing 35mm.th. Indian teak wood shutters for doors,

windows & clearstory windows incl. Indian teak wood frames of

finished size 12cm x 7cm. incl. anodized aluminum fixtures & 20 5,533.68 S.M.

39 fastenings incl. Primer coat of approved quality & two coats of oil

painting etc. For all Floor (A) Fully Panelled

(B) Partly Panelled and Partely Galzed 10 5,185.03 S.M.

(C) Fully Galzed 5 4,551.69 S.M.

Providing and fixing 35mm thick shutters for Doors, windows and

40 clearstory windows including anodised alluminium butt hinges with 5 3,941.37 S.M.

necessary screws. (A) Indian teak wood. (i) Fully Panelled.

SN ITEM Qty Unit Total

Providing and fixing FRP FRAME size 125 x 65 mm and 35 mm thick

FRP shutter with wood grain raised panneled design finish shutter

having extra reinforcement on sides & edges in Gel coat finish. The core

of the shutter & frame is to be filed up with injected polyurethene foam

41 done in situ along with embedded wooden pieces for stiffening & also 20 2,019.98 S.M.

taking hinges & fixtures. The whole FRP frame & shutter is to be water

proof weather proof,termite proof &resistance to mild acid/alkali. Rates

are to be inclusive of S.S.hinges with fastener sleeve & alluminium

fixtures & fastentings.

Providing & fixing M.S.Grills of required pattern to wooden frames of

windows etc. At all floor levels with M.S. flats at required spacing &

42 frame around square or round bars with round headed bolts & round 1500 104.20 Kg.

headed bolts and nuts or by screws incl. Priming coat of Red lead paint

etc. comp. (A) Plain grill For all Floors

Providing & fixing in position collapsible steel shutters with vertical

channels 20 x10 x 2 mm. Braced with flat iron diagonals 20 x5mm

43 size with top & bottom rails of T-iron 40x40x6mm. with 38mm dia. 20 5,865.10 S.M.

steel pulleys comp. with bolts, locking arrangements, stoppers, handles

incl. applying a priming coat of Redlead paint etc. comp.

Providing and fixing M.S. Fan clamps type 1 to 16 mm dia M.S. bar bent to

44 shpe with hooked ends to RCC slabs curing, layig including painting 10 129.02 Each

the exposed portion of loops, all as per standard design complete.

Providing & laying ordinary C.C.1:1.5:3 mix for R.C.C. work incl.

boxing, centering, vibrating, curing & mixed with approved water

proofing cement compound or "CEMWET"or"PIDICRETE LW"integral

water proofing admixture as water proofing agent to be mixed with

50 kg. cement bag shall be as recommended by the manufacture of

the water proofing material, concrete work for top, bottom slab &

side pardi for Under ground Tank & Item incl. Necessary excavation

45 & refilling the available earth, 15 cm th' C.C 1:4:8 for bedding concrete,

Half B.M. in C.M. 1:4 outside wall, inside R.C.C. pardi as per design,

10mm.th. water proofing cement plaster in C.M. 1:3 with smooth

finishing,watering etc.Comp.to all inner face & bottom of tank curing

etc. comp. incl. Locking arrangement, outlet, inlet, overflow & wash

out pipe arrangement as necessary & C.I. Cover 0.60 x .045 weight not

less then 35kg. etc. com. as per structural drawing excluding Steel & as

directed by Engineer- in-charge

Underground tank 1000 5.46 Lit.

Providing and filling in depressions of Bath and W.C. At all floor levels,

46 after completing plumbing work of pans, pipes,traps etc.with cinder or 10 500.00 C.M.

fly ash as directed by Engineer in charge etc. comp..

NOTE :- (1) The whole work is to be executed through specialized

agency with a guarantee of 10 (Ten) years given on a prescribed

proforma duly stamped (2) The rate shall include for work at all

floors & conducting water proof test as directed. (M.R.)

SN ITEM Qty Unit Total

(A) Providing and laying water proofing treatment to vertical and

horizontal surfaces of depressed portions of W.C.,kitchen and the like

consisting of :

(a) I course of applying cement slurry @ 4.4 kg/sqm mixed with water

proofing compound conforming to IS : 2645 in recommended

(b) II course of a layer of plaster in C.M. 1:3 with water proofing

compound confirming to IS:2645 about 25 mm. th' in the floor of the

depression & about 18mm th' On the side walls of the depression up to

the floor level, water proofing plaster about 18 mm. th' be continued on

the walls above the floor level for a height of 600 mm. with surface

suitable to receive further treatment

(c) Finishing top with stone aggregate 10mm to 12mm nominal size

spreading @0.008 C.M./S.M., thoroughly embedad in plaster layer.

as per specifications & instructions of Engineer in charge (Cement

consumption 0.316 Bags / S.M.)

(B) Providing and laying integral cement based water proofing

treatment including preparation of surface as required for treatment of

roofs, balconies, terraces etc. consisting of following operations.

(a) Applying and grouting a slurry coat of neat cement using

kg/sqm of cement admixed with proprietary water proofing compound

comforming to IS:2645 over the R.C.C. slab including cleaning the surface

before tratment.

(b) Laying cement concrete using broken bricks/brick bats 25 mm to

mm size with 50% of cement mortar 1:5 (1 Cement : 5 Coarse sand) 50 511.00

admixed with proprietary water proofing compound conforming to

IS:2645 ,brick bats is finally covered by jointless cement plaster 20mm

th. in C.M. 1:4 added with special water proofing compound confirming to S.M.

IS:2645 & top smooth finished with trowel with false chequered marking

of 300 mm.size.The treatment is carried along the vertical surface of the

parapet & other adjoining wall up to height of about 300 mm in a shape

of quarter round vata Incl. curing etc. Comp. With average thickness of

120 mm and minimum thickness at khurra as 65 mm.

(c) The whole terrace so finished shall be flooded with water for a

minimum period of two weeks for curing and for final test. All above

operations to be down in order and as directed and specified by the

engineer-in-charge. With average thickness of 120 mm and minimum

thickness at khurra as 65 mm. (Cement consumption 0.511 Bags / S.M.)

Proiding & laying water proofing treatment to vertical and horizontal

surfaces like consisting of (a) I course of applying cement slurry 4.4 kg

per sq.mt. mixed with water proofing compound confirming to IS:2645 in

rcommended proportions. (b) II corse of 20mm cement plaster 1:3 mixed

48 with water proofing compound in recommended proportion (c) III 100 505.00 S.M.

course of applying blown or / resideal bitumen applied hot at 1.7 kg per

sqm of area. (d) IV course of 400mm micron th. PVC sheet. (Overlaps at

joints of PVC sheet should be 200mm wide and pasted to each other with

bitumen about 1.7 kg./ sqm.)

Providing & fixing G.I. Rain water spout of 50 mm.dia & 30 cm length

Providing & fixing at all floor levels,both face polished machine cut

50 edge green kota stone slab (30mm) for urinal partition joined with 10 900.00 S.M.

grey cement slurry (1:1) incl. Rubbing & polishing etc. complete. (M.R.)

Providing & fixing at all floor levels,both face polished machine cut

edge Marble slab for urinal partition joined with grey/White

cement slurry (1:1) incl. Rubbing & polishing etc. complete. (M.R.)( Basic

Cost- Rs. 450/S.M.)

WATER SUPPLY AND SANITARY ITEMS

SN ITEM Qty Unit Total

Prov.& Fixing water closet squatting pan (Indian type W.C.pan) at all

floor levels, size 580mm incl. 100 mm size "P'or "S" trap for water closet

52 squatting pan joining the trap with the pan & soil pipe in C.M. 1:1 10 1,401.60 No.

(1cement :1 fine sand) etc. Comp.(A) Vitreous china long pattern of

approved colour For all Floor

Providing and fixing Wash Down Water closet European type W.C.

pan with integral P or S trap including jointing the trap with soil pipe in

53 cement mortar 1:1 (1 cement : 1 find sand) (seat and cover to be 10 1,303.71 Each

measured and paid for separately) (A) Viterous china pattern - I (i) in

approved colour

Providing and fixing plastic seat and cover for wash down water closet

with C.P. brass hinges and rubber buffers (B) Plastic seat and cover.

Providing & fixing wash basin with single hole for pillar tap at all floor

levels, with C.I. or M.S. Brackets painted white incl. cutting holes &

making good the same incl. fittings such as pillar tap, capstan head screw

55 down high pressure with screws, shanks & back nuts, C.P. Brass waste 10 2,059.93 No.

trap, screw down stop tap 15 mm. dia. etc. complete. (A) Vitreous

china flat back wash basin 550 mm.x 400 mm. size in approved colour

Providing & fixing Urinal or approved quality including conecting the

56 Urinal with waste pipe, tap etc. complete. (A) White earthenware flat back 10 1,036.27 Each

or corner type size 430 mm x 260mm x 350mm

Providing & fixing 600 mm.x 450 mm. mirror of superior glass at

57 all floor levels, mounted on 6 mm. th. A.C. sheet or plywood sheet & fixed 10 833.73 No.

to wooden plugs with C.P.brass screws and washers etc. For all Floor

Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary

(C.M 1:5)chamber & water tight C.I. cover with frame of

300mmx300mm size (inside) with weight includ. plastering smooth 5 1,292.19 No.

inside & outside 15mm. th' in C.M.1:3 etc. comp. (i) Square mouth traps-

--(A) 100mm x 100mm Size -P type

(B) 150mm x 100mm Size- P Type 5 1,246.92 No.

Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary

(C.M 1:5)chamber & water tight Pre cast R.C.C. cover of

300mmx300mm size (inside) includ. plastering smooth inside & outside 5 1,098.48 No.

15mm. th' in C.M.1:3 etc. comp. (i) Square mouth traps---(A) 300mm x

300mm Size -P type

(B) 150mm x 100mm Size- P Type 5 1,053.20 No.

Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside dimension

,455 x 610 mm & 450 mm deep sewer trap chamber with 23 cm th'

B.B. masonary walls in C.M 1:5 with cement plaster 15 mm th' in C.M. 1:3

inside & outside to exposed faces, R.C.C. top slab with 1:2:4 mix ( 1 5 3,155.63 No.

cement: 2 Sand : 4 Grade stone aggregate 20mm size) ,Foundation

concrete 1:5:10 & fixing C.I. cover with frame to be not less than 38 kg. On

top etc. comp. for single pipe.

.(A).Same as above but Precast RCC heavy duty Cover instead of C.I. Cover 5 2,904.47 No.

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 5 222.71 Each

Providing & construction simple chamber of 23 cm. th' B.B. Masonary in

C.M 1:5 with cement plaster 15 mm th' in C.M. 1:3 inside & outside to

exposed faces, R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 Sand :

Grade stone aggregate 20mm size) ,Foundation concrete 1:5:10 &

61 fixing C.I. cover with frame to be not less than 38 kg. On top etc. comp.

Inside dimension,455 x 610 mm &450 mm deep for single pipe

(A) Same as above but Precast RCC heavy duty Cover instead of C.I. Cover 5 2,681.76 No.

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 5 242.39 Each

Providing, Lowering & laying joining R.C.C. NP2 CLASS Pipe In C.M. 1:1

of following nominal internal diameters incl. Testing of pipes and

joints etc. Comp

SN ITEM Qty Unit Total

Providing & Fixing C.P. Brass screw down bib tap at all floor levels,

polished bright etc. comp.-(A) 15mm dia. For all Floors

Providing & Fixing gun metal check or non return full way wheel

valve at all floors levels, etc. complete. (A) 15 mm. dia.

Providing & Fixing chromium plated brass half turn flush cock at

64 all floor levels, of approved quality incl. fixing in pipe line etc. Comp.-- 25 20 263.77 No.

Providing & Fixing abonite ball cock of approved qualities directed

etc. comp. (A) 25 mm. dia.

Providing and fixing C.I. Machinehole cover 0.60 x 0.45 mt. Size

having weight not less than 35 Kg. etc. complete.

67 Providing and fixing C.P. brass waste for washbasin or sink.

(A) 32mmdia. 5 67.91 Each

(B) 40mm dia. 5 89.83 Each

Providing & Fixing U-PVC pipe (SWR) confirming to IS no. 13592 (Type

"B") of Prince/Supreme/Jain/Astral/Tulsi/Finolex make for soil

and waste discharge system at all floor levels incl. All fixtures like bends, 50 412.00 R.M.

68 tees, shoe etc. jointed with resin of approved brand & manufacture

etc. comp. (M.R.) (a) 75mm Dia

Providing & fixing U-PVC pipes Confirming to IS no. 13592 (Type

"A") of Prince/Supreme/Jain/Astral/ Tulsi/Finolex make for rain

water at all floor levels incl. fixtures like bends, tees, shoe etc joined 50 203.00 R.M.

69 with resin of approved brand & manufacture etc. comp. (M.R.) (A)

Providing, Laying and jointing on true line and level UPVC pipe (SCH-40)

line of Prince/Supreme/Jain/Astral/ Tulsi/Finolex make including

fittings make or equivalent as approved by angineer-in-charge. Pipe

shall be fixed on the wall the help of clamp at every two meter C/C

or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

70 solvent, including cost of all materials.

(F) 65 mm dia. 5 R.M. -

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/ Jain/

Astral/ Tulsi/Finolex make for water supply line at all floor levels

incl. fixtures like bends, tees, shoe etc joined with resin of approved

brand & manufacture etc. comp. Pipe shall be fixed on the wall the help of

clamp at every two meter C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 110x110

mm diameter with jali of the following nominal diameter of self cleaning

design with C.I. scread down or hinged grating including the cost of

cutting and making good the walls.

Providing & Fixing in position PVC Cowl vent to pipes

of Prince/Supreme/Jain/Astral/Tulsi/Finolex make etc.Comp. (A) 75 10 40.00 NO

(B) 110 mm Dia. 5 50.00 NO

SN ITEM Qty Unit Total

Providing & fixing M.S. Holder Bat clamps at all floor levels of

74 approved design to C.I. Or S.C.I pipes including the cost of cutting 5 30.00 No.

holes & making good the wall etc. Complete - 100 mm. dia. (M.R.)

Providing & fixing G.I./Aluminum Patti clamps at all floor levels of

75 approved design to C.I. Or S.C.I pipes including the cost of cutting 5 20.00 No.

holes & making good the wall etc. Complete - 100 mm. dia. (M.R.)

Providing erecting and fixing double coated Sintex/Super/Reno PVC

76 (ISI) mark water tank of required capacity each with all necessary 5000 3.95 Lit.

fittings & connection etc. complete on terrace.

Providing & Fixing Kathi around the vertical PVC drainage pipes for

concealing with cement plaster 20 mm avg thickness(CM 1:3 [1 cement :3

coarse sand]) finishing as per instruction given by Eng. incharge. for

(A) 75 mm PVC PIPE 10 173.00 R.M.

(B) 100 mm /110 mm PVC PIPE 10 180.00 R.M.

Providing & fixing C.P. brass pillar cock with copper connection, C.P.

brass screws complete

Make- Cera F2013101, Parry ware Cat. No.: G3102A1, HindWare Cat.

No.: F650003, Jaquar FLR-5011N

Providing & Fixing 15 mm Dia 2 way bib tap with wall Flange at all

floor levels, polished bright etc. comp.

Make- Cera F2013163, Parry ware G4834A1, HindWare Cat. No.:

F530004, Jaquar FLR-5041N

Providing & fixing 15mm C.P. brass angle valve (Stop Cock) with

C.P. copper connecting pipe 450 mm long and nuts, washer and brass

flange complete, including cutting and making good the wall where

Make- Cera F1020362, Parry ware T0712A1, HindWare Cat. No.:

F440020 F850094, jaquar CON 053 KN

Providing & fixing of overhead shower 80 mm (3”) dia with 3 flow with

Overhead Shower arm 200 mm with wall flange complete

Make- Cera F7010602AB, Parry ware, Jaquar OHS-1989 ,HindWare

Cat. No.: F160144

Providing and fixing Towel Ring fabricated from seamless stainless steel

82 tube 2mm thick in bath room with polished wall flange at end of bars

with heavy duty anchor fasteners & accessories.

Make- Cera F5014115CH, Parry ware F5014115CH, Jaqua ACN- 1121N

,HindWare F880007

Providing & fixing S.S.towel rail of 600 mm long approved make

83 including, providing & fixing C.P. brass screws, making holes in walls &

Make- Cera F5015103CH, Parry ware F880005T, Jaquar 1111BSM

,HindWare F880005T

Providing & Fixing stainless steel recessed type Soap dish of approved

84 make. Including providing & fixing screws, washers, cutting

& making good the walls.

Make- Cera F5007106, Parry ware T6902A1, Jaquar ACN-1131N

,HindWare F880011

Providing Metropole Flush Valve Dual Flow 40mm

Size (Concealed Body)

Make- Cera F8010202 , Parry ware T3302A1 , Jaquar FLV-1089NSQ

,HindWare F860075

86 Providing Sink Cock with Regular Swinging Spout

Make- Cera F2008251 , Parry ware G3321A1 , Jaquar FLR-5347N

,HindWare F650013

SN ITEM Qty Unit Total

ITEMS FOR COMPOUND WALL & OTHER MISC. ITEMS :-

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) &

disposal of the surplus excavated soil as directed within a lead of

M. For following diameter of piles.

Providing & laying cement concrete 1:2:4 (1 cement:2 sand:4 graded

stone agg. 20 mm nominal size)& curing comp. Includ.cost of form work

but exclu. Cost of reinforcement for reinforced concrete work in : (A)

Foundation, footing, Base of columns and Mass concrete.

Providing & laying ordinary cement con.1:2:4

(1cement:2sand: graded stone agg. 20 mm nominal size) finishing

smooth curing etc. comp. Incld. Cost of form work but excl. Cost of

reinforcement for R.C.C. Work in : Up to G.L./P.L. (A) COLUMNS:

(1)Having c/s area up to 0.08s.mt 10 12,123.79 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 2 10,658.16 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 2 8,692.87 C.M.

(1)Having c/s area up to 0.08s.mt 10 8,593.80 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 2 7,665.60 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 2 6,578.07 C.M.

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 crushed stone

20 m.m Nominal size)& curing comp. incl. cost of from work in: wall

Steel work welded in built up sections, framed work including

cutting, hoisting, fixing in position and applying a priming coat of red lead

(A) in beams & joists channels angles, tees, flats with connection

plates or angle cleats as in main & cross beams,hip & trussed 10 9,047.86 Qtl.

purlins connected to common raffers & the like.

(B)For work like chain link fencing, above compound wall etc. 5 9,047.86 Qtl.

(C)in trusses & trussed purlins upto 25m.Span &15m.Overall height 2 9,711.53 Qtl.

Providing and fixing G.I. chain link of 50mm x 50mm size x 10 guage

thick with nuts, bolts, washer or G.I. pins, excluding M.S. angles

etc.complete as per relevent IS specification & directed by engineer in

charge. (TATA or Jindal Make)

Providing and fixing and fitting TATA or Jindal make G.I. barbed wire

fencing with necessary barbed wire (12 x 14 guage, weight not less than

0.14 kg. / mt.) pins, hooks, excluding M.S. angles etc. complete as per

relevent IS specification.& directed by engineer in charge

Providing & fixing colouron galvaniced steel, zinc / aluminium allus

coated sheet 0.5 mm. thick roofing fixed with gslvanised grom J or L

94 hook bolts and bolt 8mm dia with bituman and impet washer filled 50 999.00 S.M.

with white lead etc. Excluding the cost of purlins rafter and trusses.

(Tata / Jindal or equivalent)

Providing corrugated G.I. Sheets of class-3 roofing fixed with

glavanished iron J or L Hooks, Bolts and nuts 8m diameter with bitumen

95 and G.I. limpet washer or G.I. limpet washer. filled with white lead 20 727.13 S.M.

complete excluding the cost of purlins, Rafters and Trusses. (1)

mm thick sheet. (Tata / Jindal or equivalent)

Providing corrugated G.I. Sheets of class-3 roofing fixed with

glavanished iron J or L Hooks, Bolts and nuts 8m diameter with bitumen

96 and G.I. limpet washer or G.I. limpet washer. filled with white lead 20 1,016.00 S.M.

complete excluding the cost of purlins, Rafters and Trusses. (1)

mm thick sheet. (Tata / Jindal or equivalent)

SN ITEM Qty Unit Total

Providing & fixing 150mm wide 450mm over all semicircular

plain G.I. sheet class-3 gutter with iron brackets 40mm x 3mm

size bolts, nuts, washers etc. including marking necessary connection

with rain water pipes. (i) 0.8 mm thick

Providing ridges or hips 600mm over all in plain G.I. sheet fixed with

98 G.I. "J" of "L" hooks bolts and nuts 8mm dia G.I. limpet and bitumen 10 641.94 R.M.

washer complete (1) 0.80 mm thick

Providing & fixing 150mm wide 450mm over all semicircular

plain G.I. sheet class-3 gutter with iron brackets 40mm x 3mm

size bolts, nuts, washers etc. including marking necessary connection

with rain water pipes. (i) 0.63mm thick

Providing ridges or hips 600mm over all in plain G.I. sheet fixed with

100 G.I. "J" of "L" hooks bolts and nuts 8mm dia G.I. limpet and bitumen 10 464.00 R.M.

washer complete (1) 0.63mm thick sheet

Providing & Fixing UV stabilise FRP Sheet roofing with overlapping the

main cladding on both edges. All fixing holes must be predrilled oversize

as specified for the sheet length and fastener being used. Fasteners must

be fitted with approved washers. Fixings should be tightened to ensure a

weatherproof seal but they must not be over tightened Side-lap fasteners

must also be installed at specified centers with the FRP sheet having

clearance holes provided as per the main fasteners Weatherproofing

shall be provided at all flashing points under the normal flashing by the

fitting of a foam closure strip to match the profile being used. Closure

strips will be sealed to the sheet with an appropriate non setting silicone

sealant. Excluding the cost

of purlins rafter and trusses.

(a) 1.5 mm thick 10 992.00 SM

(b) 2 mm thick 5 1,100.00 SM

Providing & Fixing Polycarbonate sheet roofing with surface of the

sheet is coated with an anti-UV Co-extrusion layer having good weather

resistance, it can maintain its optical properties and mechanical

performance for a long time. Fasting is usually done by screws. , The

fastening screws should be inserted about 500 mm apart and 300mm

apart Along the supporting internal purlin and edge pulin.All fixing

102 holes with diameter at least 2 mm larger than screw must be predrilled

into each screw location. The screws should be 6mm diameter with

length according to sheet thickness and corrosion resistant, with at least

heavy duty hot dripped galvanized or stainless steel. Excluding the cost of

purlins rafter and trusses.

(a) 1.5 mm thick Solid Sheet 10 1,261.00 SM

(b) 2 mm thick Solid Sheet 5 1,510.00 SM

Providing & Fixing 80 mm dia M.S. pipe as vertical post are beded in

103 1:1.5:3 concrete also horizontaly in line and connecting to purline angle 10 750.00 R.M.

etc by welding rereting etc. (a) Medium duty "B" Class

Providing & Fixing 50 mm dia M.S. pipe as vertical post are beded in

104 1:1.5:3 concrete also horizontaly in line and connecting to purline angle 10 485.00 R.M.

etc by welding rereting etc. (a) Medium duty "B" Class

Providing & fixing black board on walls of 1.8mt.x1.2mt size made up

to 12 mmth.B.W.P .Plywood (Brand Saras,Kitply,Uniply, Anchor,

Green,Wood Stock or century) fixed with teak wood beading of 65 mmx

105 50mm size, rubbing & sanding comp., incl. applying two coats of black 2 4,193.00 No.

board paint over a priming coat on plywood & French polishing the

frame all round etc. Comp. as per instruction of Engineer in charge

Providing & fixing Green board on walls of 1.8mt.x1.2mt size made up

to 18 mm th.ply (using IS 710 Marin ply) with 1 mm thick outside

green board & 0.8mm backside white laminate & with good

Quality of adhesive with appropriate fittings of Alluminium fittings or

teak wood bedding 65 mmx 50mm size, rubbing & sanding comp., as per

instruction of Engineer in charge (M.R.)

SN ITEM Qty Unit Total

Providing & fixing White board on walls of 1.8mt.x1.2mt size of 12mm

107 thick with appropriate fittings and Alluminium fittings comp., as per 2 4,230.00 No.

instruction of Engineer in charge (M.R.)

Providing & Fixing Reading table size 8' x 4' and height 2'-6" with

table top 18mm thick (Brand Saras,Kitply,Uniply, Anchor, Green,Wood

Stock or century) commercial plywood with 1.0mm thick lamination

108 sheet fitting with teakwood moulding table top supported on 3" x 3" 1 14,774.00 NO

teakwood leg & 3" x 11/2" teakwood framing top and bottom with french

polish labour work hardware etc. as per site in charge instruction and as

Providing & Fixing Librarian table with 18mm thick commercial

plywood (Brand Saras,Kitply,Uniply, Anchor, Green,Wood Stock or

century) )with 1.0mm thick lamination sheet table top supported on 2" x

109 2" teakwood leg & make 3 nos. drawers of 1' 3" width on both side with 1 8,390.00 NO

necessary french polish hardware labour etc. as per site incharge

instruction and as per drawing ( Size 4' x 2'-6" x 2'-6" , all framing other

then legs are teak wood of size 2" x 1")

Providing & Fixing simple 12mm thick commercial plywood (Brand

Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century) Rack of size

110 6' x4' and depth 1'-6" 5 Nos. horizontal partition, supported 2" x 1" 1 7,690.00 NO

framing with necessary french polish hardware labour etc. as per site

incharge instruction and as per drawing.

Providing & Fixing fitting commercial 8mm thick plywood (Brand

Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century) magazine

stand of Size 6' x 4' with 3" x 11/2" vertical supporting and adjustable

lag support and horizontal simple 2" x 1" teakwood patti for magazine

support with necessary french polish hardware labour etc.as per site in

charges instruction and as per drawing.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow

tubes, channels, plates etc., including welding, grinding, buffing,

polishing and making curvature (wherever required) and fitting the

same with necessary stainless steel nuts and bolts complete, i/c

fixing the railing with necessary accessories & stainless steel dash

fasteners , stainless steel bolts etc., of required size, on the top of

the floor or the side of waist slab with suitable arrangement as per

approval of Engineer-incharge, (for payment purpose only weight of

stainless steel members shall be considered excluding fixing

accessories such as nuts, bolts, fasteners etc.).

Providing & fixing Z - clamps at all floor levels of approved design to C.I.

113 S.C.I. or PVC pipes including the cost of cutting holes & making good the

wall etc. Complete - 100 mm dia as per architect instructions.

(A) 40 to 50 mm dia 10 62.00 No.

(B) 75 to 90 mm dia 10 75.00 No.

(C) 110 mm dia to upto 150 mm dia 10 90.00 No.

(C) 150 mm to 200 mm dia 10 98.00 No.

Providing and constructing sandwitch type Polish Kota Stone

cooking platform 0.6 mt. wide & 0.75 mt. height, including one end side

Polish Kota stone (Double Polish) of 1.25 mt. height & front Polish Kota

stone patti of 10 cm wide, vertical partitions of half B.M. wall in C.M. 1:4

and 10mm th. plaster in 1:3 with finishing smooth with cement slurry as

required and Stainless Steel sink of 0.45 mt x 0.45 mt size of approved

quality and make with required all fitings & fixitures etc. comp as per

instruction given by site in charge at all floors.

SN ITEM Qty Unit Total

Providing and constructing sandwitch type Granite stone cooking

platform 0.6 mt. wide & 0.75 mt. height, including one end side granite

stone (Double Polish) of 1.25 mt. height & front granite stone patti of

10 cm wide, vertical partitions of half B.M. wall in C.M. 1:4 and

115 10mm th. plaster in 1:3 with finishing smooth with cement slurry as 5 3,128.00 Rmt.

required and Stainless Steel sink of 0.45 mt x 0.45 mt size of approved

quality and make with required all fitings & fixitures etc. comp as per

instruction given by site in charge at all floors. (Basic rate of Granite

Providing and fixing 150 mm wide, approved quality chicken wire mesh

(FRP / PVC)at junction of brick work and RCC work or two dissimilar

116 surfaces, at all heights fixed by nails, rowal plugs or tag by cement mortar 10 102.00 S.M.

1:3 before applying the plaster, including curing, scaffolding all complete

Providing and filling Epoxy grout of approved or suggested

brand by consultant / Engineer in charge in 4mm to 6mm thick

tiles joint including spacer with cleaning of joint by vacuum or blower

Providing and fixing rebar of following diameter using chemical

grout of Swanchore/Hilti/Fischer or equivalent make including cost of

all equipments, tools, material, labour, etc. Standard procedure

as mentioned in manufacturer's specifications shall be strictly

followed, which shall be submitted and got approved from the

authority prior to start of work. The rate shall also include cost of

118 drilling of hole of required diameter and depth as mentioned in

manufacturer's specification, cleaning the hole with required air blower

and other necessary tools and tackles, positioning, providing and

grouting chemical, allied fixtures and fasteners, etc. but excluding the cost

of reinforcing bar etc. complete. Item includes necessary scaffolding,

staging, labour, tools and equipments, etc. complete as directed by

the engineer-in- charge.

Carring out plinth treatment to post construction / existing structure

by spraying chemical solution for termite control treatment including

labour and material consistment with ISI specification. Using Chlordene

and Chiorpurfiles 20 EC. As per 6131_paret-II Consentration

Weight one percent is recommended i.e. one litre 20 EC chemical

emulsion with 19 liter give 1% concrentration inclusive of one litre

chemical emulsion appication at the rate of 5 litre chemical / Sqm of

surface is recommended as per IS.

Providing and fixing rolling shutters of approved make made of 80 mm

wide M.S. laths inter locked together through their entire lenght and

jointed together at the ends by end locks mounted on specially

120 designed pipe shaft with bracket plates, guide channels and 5 3,503.41 Smt.

arrangements for inside and outside locking with push-pull operation

including the cost of hood cover and spring etc. complete (A) Shutters

having width below 3.5 M.

Providing and fixing rolling shutters of approved make made of 80 mm

wide M.S. laths inter locked together through their entire lenght and

jointed together at the ends by end locks mounted on specially

121 designed pipe shaft with bracket plates, guide channels and 5 4,495.02 Smt.

arrangements for inside and outside locking with push-pull operation

including the cost of hood cover and spring etc. complete. (B) Shutters

having width 3.5 M and above

SN ITEM Qty Unit Total

Providing & Fixing 3 mm thick metal sheet with CNC cutting to fix

it on vertical surface.Steel work welded in built up sections, framed work

including cutting, hoisting, fixing in position and applying a priming coat

of red lead paint in beams & joists channels angles, tees, flats with

connection plates or angle cleats as in main & cross beams, hip & trussed

purlins connected to common raffers & the like.

Providing and laying broken china mosaic flooring for terrace using

12mm to 20mm broken pieces of glazed tiles to be laid over cement

mortar 1:3 to plain or slope and to be tempered to bring mortar

creme out upto surface using white cement including rounding off

junctions and extending them upto 15 cm along the wall clearing with

water and oxalic acid etc. as directed.

Providing and Fixing Hollow steel Sections Framed Work including

124 Cutting, Hoisting, Welding & Fixing in position Purlin, Main Chord etc. as 900 126.00 Kg

per Engineer- in-charge.TATA / JINDAL / ASIAN Make

Providing cement vata (10 cm x 10 cm size) quarter round in cement

mortar 1:1 including neat cement finishing, watering etc. complete.

Apply two coats of putty and two coats of primer of approved brand

and manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other

matter and sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall surface to

give an even shade including throughly brushing the surface free 50 79.39 S.M.

from mortar droppings and other foreign matter and sand papered

For every subsequent coat Extra over item no.above 50 33.72 S.M.

Painting two coat (excluding priming coat) on new steel and

other metal surface with synthetic enemal paint, burshing to give

an even shade including cleaning the surface of all dirt, dust and other

foreign matters.

Providing & applying two coats of weather shield max paint (3 coats

may be required in case of darker colours.)of ICI Dulux or Apex

Ultima of Asian Paint including applying exterior acrylic primer coat

as per manufacturers specification and directions in shade and colour

approved by architects, on exterior surfaces of the building including

scaffolding, preparing the surface, watering, curing etc. complete and

as directed by the architects and manufacturers.

Surface Preparation :

surface is thoroughly clean, dry and free from all loose dirt, chalk,

grease, fungi, algae and flaking paint. This can be achieved by brushing

with a wire/ stiff coir brush, followed by water jetting if required. Fill

up all minor cracks and defects with white cement and sand mixture

in the ratio 1:3. For application on previously painted wall, previous

coatings of paint must be thoroughly scraped off and Clean the

surface thoroughly using wire brushes.

Apply a liberal coat of exterior acrylic primer and allow it to dry for 4-5

hours. Application of putty is not recommended.

Minimum 4-6 hours duration is required between each coat of weather

shield max paint

Providing and fixing window having extruded aluminum Colour anodized

section frame main outer size 127mm x 38.10mm x 1.35mm @wt.

1.384kg/m, horizontal Four track member size 122.20mm x 31.75mm x

1.10mm@ wt 1.205 kg/m, vertical member of size 122.20mm x 31.75mm

x 1.50mm @1.398 kg/mt with sliding shutters of horizontal member

size 40mm x 18mm x 1.29mm@ 0.456kg/mt ,vertical member of size

40mm x 18mm x 1.29mm @ 0.456 kg/mt with 5 mm thick transparent

bronze colour tinted float glass with powder coated aluminum fittings

and fixtures and transparent silicon sealant glass fixing to frame as

per details etc complete for window.

(A) Same as above but Colour anodized 5 2,140.33 S.M.

SN ITEM Qty Unit Total

Providing and fixing window having extruded aluminium Powder

Coated section frame main outer size 95 mm x 24 mm x 1.17 mm (of

jindal section no:2459 @ Wt. of 0.738 Kg/mt), horizontal Three track

member size 92 mm x 31.75 mm x 1.30 mm (of jindal section no;8688,

@ Wt. 1.07 Kg/mt), vertical member of size 92 mm x 31.75 mm x

1.50 mm (of jindal section no:8933, @ Wt. 1.06 Kg/mt) with sliding

shutters of horizontal member size 40 mm x 18 mm x 1.29 mm (of jindal

section no:8947 @ wt. of 0.456 kg/mt), vertical member of size 40 mm x

18 mm x 1.29 mm (of jindal section no:8949 @ wt. of 0.456 kg/mt) with

mm thick transparent bronze colour tinted float glass with powder

coated aluminium fittings & fixtures and transparent silicon sealant glass

fixing to frame as per details etc.

(A) Same as above but Colour anodized 5 1,591.87 S.M.

Providing and fixing window having extruded aluminium Powder

Coated section frame main outer size 63.50 x 38.10 x1.95 mm (of

Jindal section no.4605, @ Wt. 1.094Kg/mt) horizontal Two track

member size 61.85 mm x 31.75 mm x 1.20 mm (of jindal section

no:8687, @ Wt. 0.695 Kg/mt.) vertical member of size 61.85 mm x

31.75 mm x 130 mm (of jindal section no:8758 @ wt. of

132 kg/mt) with sliding shutters of horizontal member size 40 mm x18 5 1,705.67 S.M.

mm x 1.29 mm ( of jindal section no:8949, @ Wt. of .456 Kg/mt)

vertical member of size 40 mm x 18 mm x 1.29 mm (of jindal section

no:8947, @ Wt. of 0.456 Kg/mt/section 8948, @ Wt. of 0.457 Kg/mt)

with 5 mm thick tranparent bronze colour tineted float glass with

powder coated aluminium fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details etc. complete for window.

(A) Same as above but Colour anodized 5 1,705.67 S.M.

Providing and fixing standared extruded ofalluminium section of

size 63mm x 38.10mm x1.2mm , @ Wt. 0.643 Kg/mt with colour

Powder Coated alluminium frame for ventilation with 5 mm thick frosted

glass as details etc complete for Ventilation

(A) Same as above but Colour anodized 5 2,414.00 S.M.

Providing and fixing standared extruded of aluminium section of size

x 37.0 x0.90 mm (of Jindal section no.14080, @ Wt. 0.471 Kg per mt)

with Powder Coated alluminium frame with 5 mm thick transparent

bronze colour tinted float glass as details etc. complete for fix window.

(A) Same as above but Colour anodized 5 2,336.00 S.M.

Providing & fixing partly panel & partly glass Powder Coated

Aluminium doors with aluminium section of Hindalco, Jindal

Narmada,Banco or Equivalent approved make having Poder Coated

outer frame Leg Partition section of 63.50 mm x 38.10 mm having

weight 1.158 kg. / R.M. shutter section having size 83.5 mm x 44.45mm (

135 top & bottom: 1.384 kg./rmt. and middle 1.139 kg./rmt.) door vertical 5 3,237.00 S.M.

47.62mm x 44.45 mm ( vertical:0.881 kg./rmt. & top hing side:0.974

kg./mt.), Glazing Clip (Jindal Section No. 19370 Wt. 0.109 Kg./ Mt.) with

5mm thick sheet glass in acid frogting and 12 mm thick prelaminated

sheet of Greenlam, Panama or archid make as approved by Engineer-in

charge including fixing brass pivot, handle, lock etc. complete.

(A) Same as above but Colour anodized 5 3,237.00 S.M.

Providing & fixing Powder Coated Aluminium partly glazed and

partly panelled partition using medium duty sections of

Hindalco,Zindal, Narmada, Banco or Equivalent approved make having

section 63.50 mm x 38.10mm ( Frame-.758 kg/rmt & Middle section-

0.819 Kg./rmt), Galzing Clip with 5 mm thick clear float glass of

136 approved make including all other necessary fittings and fixtures. Entire 5 2,400.00 S.M.

work will have to be made water proof using necessary rubber sectioned

wherever required. Gaps all round the frame to be filled with approved

water proof sealent. Bottom portion of doors both side to be covered

with 12mm thick prelaminated particle board of approved make and

quality and as per design.

SN ITEM Qty Unit Total

(A) Same as above but Colour anodized 5 2,400.00 S.M.

Demolition including stacking of serviceable materials with all

lead and lift. (i)) RCC Work

Demolition of brick work and stone masonry including stacking of

138 serviceable materials and disposal of unserviceable materials with all 2 550.40 C.M.

lead and lift. (i) On Cement Mortar.

Removing and scraping of old deteriorated plaster of any thickness from

wall / RCC member including stacking of serviceable material and

disposal of unserviceable from site

of work with all lead and lift.

Dismentling steel work including distempering and stacking

the maerials with all lead and lift.

Dismentling door, windows, ventilators etc. (wood or steel) shutters

including chowkhats architraces, holdfasts and other attacement etc.

complete and stacking them within all lead and lift. (i) Not exceeding

Dismentaling of sheet roofing inlcuding ridges, Hips, Valleys, Gutters etc.

142 stacking of serviceable materials and disposal of unserviceable materials 2 47.72 S.M.

with all lead and lift. (i) G.I. sheet roofing.

143 Removing of Collapsible Gate 1 1,500.00 No.

144 Removing of Rolling Shutter 1 1,000.00 EACH

Dismentaling tiled of stone floors laid in mortar including stacking of

145 serviceable materilas and disposal of unserviceable materials with all

A Kota stone flooring and steps 5 47.72 S.M.

B Marble 5 47.72 S.M.

C Tiles flooring / Dedo 5 47.72 S.M.

D Granite flooring and steps 5 47.72 S.M.

Providing & filling with Mix soil in layers of 20 cm. Th'. Incl. watering,

ramming & consolidation etc. complete.

Supplying & filling fine sand(pana) in 75 mm / 100 mm / 150 mm

compacted thickness over the base including necessary compaction,

watering etc. complete. Item includes leveling by using vibratory plates

compacted machine and as directed by engineer in charge.

Providing and laying cement concrete 1:5:10 (1- Cement : 5- Coarse sand

148 : 10- hand broken stone aggregates 40 mm nominal size) and curing 2 2,517.44 C.M.

complete excluding cost of formwork in (A) Foundation and Plinth

Providing 100mm thick readymade C.C. kerb of strength M-20 (size

300mm x 380mm) purchased from SMC's approved paverblock

manufacturer & setting in line, level and in truly vertical position,

149 including filling joints in C.M. 1:1 (1 part of cement : 1 part of stone dust) 50 228.00 R.M.

smooth pointing in C.M. 1:1 (1 part of cement : 1 part of coarse sand)

including watering etc. complete and

as directed by engineer in charge.

Providing interlocking type Rubber moulded cement concrete paver

block of approved shape, design & colour having 60mm thickness (M-

35) purchased from SMC's approved paverblock manufacturer only &

150 fixing of fine sand bedding. Item includes levelling by using vibratory 50 524.00 S.M.

plates compacted machine. Item also includes all materials, labour,

equipments, tools, plants, watering, cleaning etc. complete.

Without colour 5 524.00 S.M.

Providing & laying Granular sub base (GSB)confirming to Grading-

V of Table 400.0 of compacted thick of 150mm with specified graded

stone metal and sand mixed in place and laid with mechanical means

151 spreading with motor grader and compacting with vibratory roller 50 1,418.04 C.M.

having minimum 80-100 KN static weight to acheve desired density

of 98% of MDD including all material, labour, machinery with all leads

and lift etc. complete.

SN ITEM Qty Unit Total

Providing & laying cement concrete Pavement using 1:1.5:3 (1

cement:1.5 sand:3 graded stone agg. 20 mm nominal size) & Vaccuum

Dewatering technique including floating surface with a skim powder

floater, curing etc. complete.

Providing & laying cement concrete Pavement using 1:2:4 (1 cement:2

sand:4 graded stone agg. 20 mm nominal size) & Vaccuum Dewatering

technique including floating surface with a skim powder floater, curing

Providing and laying 200 micron plastic sheet on prepared sub base

For V.D.S Concrete

Cutting of Groove 5 to 7 mm thick in VDS for depth 1/3 of total thickness

with filling of epoxy sealent as directed by engineer in charge

RCC Core Cutting is about making precise, circular cuts for creating holes

of required diameters for Rehabilitation in civil works. The core drilling

156 rod is fitted with diamond pieces at the drilling end. The core cutting

machine can be used for both horizontal and vertical hole making

Providing and fixing eco-friendly light weight calcium silicate false

ceiling tiles having Tegular edge & 15 mm Thick Densified edges on

the Tile Periphery for Extra Strength The Light weight calcium

silicate ceiling tiles shall have , light reflection 85% non-

combustible as per B.S. 476 part IV, 100% humidity resistance and also

having thermal conductivity0.043° w/m KC.for the best thermal

Insulation . The Light weight calcium Silicate tile shall be of

approved texture Fine fissured/ Spintone/Cosmos having NRC value

of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of size

595 X 595 mm to be laid on true horizontal level suspended inter

157 locking metal grid of hot dipped galvanized steel sections

(galvanizing @120 grams per sqm including both side) consisting of

main ‘T’ runner suitably spaced at joints to get required length and

size of 24X38mm made from 0.30 mm thick (minimum) sheet,

1200mm centre to centre, and cross ‘T’ of size 24X28mm made out of

0.33mm (Minimum) sheet spaced 1200mm along spaced between

main ‘T’ at 600mm centre to centre to form agrid of 1200X600mm and

secondary cross ’T’ of length 600mm and size 24x28mm made of

mm thick (Minimum) sheet to be interlocked at middle of the

1200X600mm panel to form grid of size 600X600mm resting on

periphery walls/partitions on a perimeter wall angle pre-coated steel of 20 1648.96 Sqm.

158 GYPSUM CEILING 50.00 Sq. Mt 958.58

Supplying and Fixing of Suspended ceiling system components which

includes Single Layer Boarding with 12.5mm thick USG Boral Standard

Plasterboard This includes of USG Boral Thundersteel Perimeter Channel

(0.50mm thick having one flange of 20mm and another flange of 30mm

and a web of 28mm) screw fixed to brick wall/partition with the help of

approved screws at 600mm centers. Then suspending of USG Boral

Thundersteel Intermediate channel (45mm x 0.90mm thick with two

flanges of 15mm each) from the soffit at 1220mm centers with of USG

Boral Thundersteel Ceiling Angle (25x10mmx0.50mm thick) fixed to RCC

Slab with of USG Boral Soffit Cleat (37x27x25x1.6mm thick) and 8mm dia

40mm long Anchor Fastener @ 600mm Centers, respectively. USG Boral

Thundersteel Ceiling Section (having web of 51 mm and two flanges of

27mm each) are then fixed to the of USG Boral Thundersteel

Intermediate channel with the help of connecting clip (2.6mm Dia) and in

perpendicular direction to the USG Boral Thundersteel intermediate

channel at 457mm centers. USG Boral Thundersteel profiles are rolled

with AZ Steel (150 GSM & 310 MPa Yield Strength) having base metal

conforming to IS 513:2016 as per IS 15961:2017/ AS

1397:2001).12.5mm thick USG Boral Standard Plasterboards (confirming

to IS 2095 Part 1) is screw fixed with 25mm long Drywall screws at

159 CEMENT SHEET CEILING 50.00 Sq. Mt 1248.00

SN ITEM Qty Unit Total

Providing and fixing of Cement sheet ceiling using aluminium channel &

pipe, screws etc. complete with all material, labour with all lead, lift and

transport. and finished by approved shade of plastic paint (Basic Rate for

8 mm plain cement sheet : 35 rs./sqft.)and finished and complete the

work satisfactorily as per instruction of architect or Engineer-in charge

And as per " Architecture" detail.

Providing and fixing

160 (A) 40 mm thick RCC cover for simple chamber,s.w.trap & tank Top 5.00 400.00 No.

(B) PVC water tank cover upto 2000 Lit. 5.00 200.00 No.

Providing and Replace door, Window S.S. Fixtures fix in wooden /

Alluminium door - window

(A) S.S. Stopper 60 Cm long of ASIS 304 5.00 363.77 No.

(B) S.S. Stopper 30 Cm long of ASIS 304 5.00 182.32 No.

(C) S.S. Stopper 20 Cm long of ASIS 304 5.00 127.53 No.

(D) S.S. Aldrop 20 Cm long of ASIS 304 Grade 5.00 218.26 No.

(E) S.S. Aldrop 25 Cm long of ASIS 304 Grade 5.00 327.83 No.

(F) S.S. Aldrop 30 Cm long of ASIS 304 Grade 5.00 400.58 No.

(G) S.S. Handle for door/ window 10 Cm size of ASIS 304 Grade 5.00 54.78 No.

(F)S.S. Handle for Door 15 Cm size of ASIS 304 Grade 5.00 76.17 No.

(I) S.S. Pipe Handle for door 30 Cm size o ASIS 316 Grade 5.00 873.05 No.

(J) Inter Lock [Kadaka lock] 5.00 209.71 No.

(H) Locks Godrej Mortice lock cover 5.00 329.63 No.

(I) Door closers arrow type with spring 12 length as approved sample

(J)Handle for doors Windows Cupboards etc. Brass 15 cms. Length 5.00 59.91 No.

(K) S.S. Door / window hinges 4x1"x1" 5.00 54.78 No.

Providing & fixing water proof plywood (ISI marks 710 grade) at the

door,window and any space in the building. necessary hardware,screws

materials etc. complete as per instruction by engineer in charge.

Providing & laying Non reflective solar contact film for fixing on glass as

163 approved colour,design,cutting complete as per instruction by engineer 50.00 406.57 S.M.

Providing & fixing Glass Table Top using 08mm th.clear glass with crystal

164 edge & necessary hardware materials etc. complete as per instruction by 5.00 1350.00 S.M.

engineer in charge.

Removing & resetting existing readymade c.c. kerb stone of required size

& thickness in line .level and in truly vertical position including filling

165 joints in C.M. 1:1 (1 part of cement : 1 part of stone dust) smooth pointing 50.00 56.00 R.M.

in C.M. 1:1 (1 part of cement : 1 part of coarse sand) including watering

etc. complete and as directed by engineer in charge. (M.R)

Removing and Resetting of Paver block of walk-way with necessary sand

166 / pana filling and make in line and level with necessary vibrating using 50.00 102.00 S.M.

compactor machine.

Providing and fixing hard drawn steel wire fabric 75mmx25mm mesh or

167 weight not less than 7.75 kg.per Sq.M. to window frames etc. including 10.00 762.20 S.M.

60x 20mm beading of teak wood.

Providing & fixing G.i mesh 25X25X3mm used for celling repair fixed

168 with celling rebar column as per directed by enginner incharge rate 10.00 546.00 S.M.

excluding the rebar cost .

SN ITEM Qty Unit Total

Providing and filling the expansion joint by polymer confirm to BS4254-

1983 as per required shade and specification by making groove of

169 mmx12.5mm lather by cutting or by repairing groove and removing

mortar dropor anyother foreign materials including applying primer and

filling required size (over size of joint PU foam etc. complete.)

Cutting out cracks of roof terrace to V- section , cleaning out,

wetting , grouting with cement and sand slurry 1:3 (1-cement 3-sand )

Cutting out cracks roof terrace to V-Section cleaning out and

171 filling solidly with a hot mixture of bitumen and clean dry sand (1:1 by 10 76.04 Rmt

Anti-Termite System:Providing and laying of permanent piping

technology anti-termite treatment before flooring work by installing

LLDP (Low linear density polyethylene) tube of 8 mm O.D. &

mm 1.D. with inbuilt pressure compensation chip every 30 cm

interval in the tube, having working pressure of 2 Kg/cm2 and

release rate of 1.9 Itr/hour fixed by P-clips and nails. The LLDP pipe

shall be installed at the entire periphery of the building and at internal

network of building at a depth of 20 to 200 mm under floor at every 2 to

172 3 mtr. c/c distance (adjusted as per building layout ) & Ends of loop 10.00 134.33 S.M.

pass through a PVC elbow of minimum 32 mm ID at junction box of

wall and floor level, entering into a steel reinforced grooved

flexible pipe of minimum 22 mm ID leading into junction box and

the loops shall terminate in junction boxes & test every junction

during injecting chemicals for termite control treatment. The anti

termite chemical Imidacloprid 30.5% SC mix as per IS-6313 (part III)

shall be injected by the pressure pump diluted with water @

ml/5 ltr of water at the rate of 2 Kg/sq.cm @ 5 Ltr/SMT. The

contractor shall submit approved line plan for piping system and

Providing & fixing Aluminium Composite panel of Alum Decor, Indobond

& Flexibond make to all sufaces . 4mm thick in required colours of

exterior consisting of two layers of aluminium skins of 0.25mm thick

sandwiching a thermo plastic core in continuous lamination process with

PVDF coating of exterior grades ensuring long life colour and fungal

173 resistance .Base frame work with aluminium sections shall be fixed over 100.00 220.00 Sq.ft

the all surfaces,ACP shall be fixed to the frame work as cladding it

includes cost of labour ,Materials ,accessories ,adhesive ,scaffolding

,wastages ,transport , taxes, fixing into a neat finish in aesthetic point of

view, without any undulations in facias all complete as per drawing and

instruction of engineer in-charge.(M.R)

Providing & fixing Hospital Curtain of 8'-0" height with 1 ft Mesh

curtain at top with necessary Brackets,Curtain Track with accessories

complete.Curtain to be as per approved same.All the work complete as

per the datailed drawing.make up sample and instruction of

Architect/EIC.Fabric should be water repellent,antifungal/anti bcterial

and fire retardent.Curtain track should be made of poewed coated

alluminium profile and installed as per site height(including Suspending

rods) specifications and finished and complete the work satisfactory as

per instruction of architect or Engineer-in charge and as per

"Architecture" details.

EXECUTIVE ENGINEER

NEW EAST (SARTHANA) ZONE

SIGNATURE OF CONTRACTOR SURAT MUNICIPAL CORPORATION