Construction of building for Dr. G.S. Khush Institute of Genetics, Plant Breeding and Biotechnology

Amount

Pdg & Fixing Rain water harvesting structure (underground collecting/ disposal chamber) 5’-00’’ x 6’-6’’x 5' deep , constructed with 9’’ thick brick walls in laid in CM 1:5, complete with 3’-0’’x2’-6’’x2’-0’’ deep (4 No. Haudies) constructed with 9" thick walls laid in CM 1:5 with removable 4" thick R.C.C slab covers finished with plastering/ cement rendering complete with earthwork in excavation, 6" th C.C. 1:8:16 with brick ballast in foundation walls of haudies , 12.5mm thick C.P 1:4 bothside of walls and finished with cement rendering 1mm thick with water proofing chemicals. C.C. 1:2:4 , 2” thick floor over 4’’ thick C.C. 1:8:16 bed , 110mm dia SWR UPVC rain water pipe of required length as per site Supreme/Finolex make 6 kg/cm2 pressure with bend, socket, solvent, holding, clamps required of best quality for holding pipe from top of building roof to ground floor, PVC pipe 200 mm/8" dia 6kg/cm2 as per IS: 4985 for connecting haudis and harvesting structure/ collecting / disposal chamber. G.I/IRC fabric grill with 1” x 1” hole supported with MS frame made out of 35mmx35mmx5mm thick angle iron and filled with pea gravel of required gauge stone and PVC/Nylon jali of heavy gauge best quality fixed on all round of pipe stacks. Pdg and fixing M.S. angle frame 40x40x6mm and openable cover made out of M.S. Angle iron 35x35x5mm, M.S. Flat 35x5mm with M.S. door made out of 16 gauge sheet with hinges, handles, locking arrangement etc complete with one coat of primer and two coats of paint. Drilling of bore well 6’’ dia 100’0 deep. Providing & lowering PVC pipe 4’’ i/c 6kg/cm2 ISI makes of best quality 110’-0’’ i/c making filter wraped with Nylon jali fixing with PVC specials such as end cap, cowl, Tee, sockets etc complete in all respects with primer paint where as required on MS Steel parts and making operational with satisfaction of Engineer in charge.

Boring & installation of 2 HP Submersible Pump with 6’’dia bore 310’ - 0” deep, with PVC Pipe 4½" i/d 6 kg/cm2 (340 feet length), ISI marked including PVC socket, solvent solution. Filter fabrication, Nylon jali, Top plate, GI Bend 1¼", Nut Bolts, Rubber sheet, PVC tape, Submersible Pump set, 2 HP, single phase Head 200ft, NRV 1¼ " Make Crompton Greaves, Supplying and fixing Panel Board having, starter, shunt capacitor, kit kat, Ampere meter , voltmeter suitable for 2HP motor, all of star delta make; PVC water proof flat cable 2.5 sqmm, 100 mtr (make finolex), G.I pipe 1¼" i/d (Jindal B class) upto required length of 250’ – 0” appox. including sockets ‘UU’ make and it also includes the cost for development of submersible pump water with heavy duty compresser complete in all respects & making operational with satisfaction of Engineer in charge.

PATHAK CONSTRUCTION CONSORTIUM

SHIVA ENTERPRIZES

SOHAN LAL MEHTA

RAJESH TULI

SOHAN LAL MEHTA

SHIVA ENTERPRIZES