Providing, Installation and commissioning of Hi wall inverter Split Air Conditioning Machines for the newly constructed residential building of his lordship Honble Mr. Justice S.G Chattapadhya, Judge high court of Tripura at Durjoynagar Airport road

Amount

Providing of Split type Hi- wall 1.5 TR (4500 K cal/hr ± 2%) split AC machine inverter Compressor technology Operating on non-CFC refrigerant (R-410/R-32/equivalent refrigerants) suitable for wall mounting conforming to IS: 1391(part-II) specification(Evaporator & Condenser must have copper pipe) suitable for operation on 230 Volt ± 10 % , not less than 3(three) Star rating (2019 standard), 50 Hz, Single Phase AC Supply capable of performing a) Cooling b) Dehumidifying c) Air Circulation d) Filtering as per direction of the Engineer-in-Charge.(Haier/Hitachi/ Blue Star/ Carrier/Voltas make ). i) 1.5 TR

Providing of Split type Hi- wall 2.00 TR(6000 K cal/hr ± 2%) split AC machine inverter Compressor technology Operating on non-CFC refrigerant (R-410/R-32/equivalent refrigerants) suitable for wall mounting conforming to IS: 1391(part-II) specification(Evaporator & Condenser must have copper pipe) suitable for operation on 230 Volt ± 10 % , not less than 3(three) Star rating (2019 standard), 50 Hz, Single Phase AC Supply capable of performing a) Cooling b) Dehumidifying c) Air Circulation d) Filtering as per direction of the Engineer-in-Charge. (Haier/Hitachi/ Blue Star/ Carrier/Voltas make ). j) 2.00 TR

Standard installation of 1.5 TR/2.00 TR capacity High wall Split type Air Conditioner in/c repairing of drilled wall by cement mortar, painting in/c necessary insulation of copper pipes and also providing electrical 3 pin 16 amp top for connection in socket & necessary scaffolding etc. complete as per direction of the Engineer-in-Charge.

Supply and installation of additional length of copper pipe of suitable diameter for suction and liquid line with installation and necessary wiring between indoor and outdoor unit beyond the standard length.

Fabrication of M.S. platform for placement of condensing unit by using M.S. angle of (50x50x5) mm size base plate, nuts & bolts/cradle of suitable sizes i/c painting, fitting, fixing grouting by cement mixer as per direction of the Engineer-in-Charge.

Providing hard PVC pipe of best quality of 25 mm diameter including necessary clamping and fitting for draining of condensate water from indoor unit as per direction of the Engineer-in-Charge.

Providing and connecting Electric Control cables between MCB to indoor/outdoor. A) 3C X 2.5 Sq. mm Copper Cable.

R.P.ELECTRONICS

Eastern Commerce