CERTAIN B/R AND E/M MINOR WORKS IN ROOM NO 127, 223, 203, 307, 305, 318 IN NTC COMPLEX , COMMUNITY HALL AND SEMINAR HALL IN DEFENCE LAB JODHPUR

Amount

Taking down chowkats or frames (without taking of shutters from the frames) area exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified & directed by Engineer-in-charge.

M&L Cutting openings through walls for door, windows & other openings or enlarging existing openings, etc. or cutting uot defective masonry for underpinning including providing, fixing & removing, shoring, cleaning & stacking stone & removing surplus to store & rubbish off the premises to a distance 50mtr & nexc 250mtr ccomplete all as specified and directed by Engineer-in-charge.

M&L Forming jambs, etc. to openings (to foregoing items), including cutting, toothings & properly bonding into old work, including facing & pointing (if necessary) to match existing work in cement work 1:4 complete all as specified and directed by Engineer-in-charge.

M&L Making good under cills (or over arches, lintels & bressummers) including all pinning as necessary in cement work 1:4 complete all as specified and directed by Engineer-in-charge.

M&L for rendering 15mm thick plaster in CM 1:6 on faces other than fair of brick or concrete work finished the surface even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge.

M&L two coat of oil bound distemper emulsion surfaces of wall incl preparing of surfaces complete all as specified and directed by Engineer-in-charge.

S&F Anodised aluminium (powder coating any colour) frame for doors, windows, ventilators & partition with one or more rebates incl jointing cleat for fixing etc. complete all as specified and as directed by Engr-in-charge. (Thickness of powder coating not less than 50 micron)

S&F anodised aluminium(powder coating of any colour) window and ventilator shutters,side hung type without sash bar,aluminium section weighting 1.00 to1.80 kg/m including necessary jointing cleats,glazing clips,rubber packing,anodised aluminium snap beading,screws etc anodised aluminium fittings hinges (type B-21) 100 mm long (02 Nos) tower bolt 100 mm long (02 Nos) and handle 100 mm long (01Nos) on each shutters, complete all as specified & directed by Engineer-in-charge.(thickness of powder coating not less than 50 micron) (Note :- sheet glass shall be measured and paid seperately).

S&F Anodised aluminium grill (powder coating any colour) 6mm aluminium section having square gap of 50 mm with U clip (weight not less than 0.50Kg per sqm) complete all as specified and directed by Engineer-in-charge. (Deco grill or equivalent, thickness of powder coating not less than 50 micron)

S&F 4.00mm thick tinted sheet glass ordinary quality in squares area exc 0.5 sqm in each pane thick complete all as specified and directed by Engr in charge complete all as specified and as directed by Engr-in-charge

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 and fixed with stainless steel wire staples complete all as specified & directed by Engineer-in-charge.

S&F MS steel work in stairs (framed) including stringers, treades, landing,balusters, hand rails etc. including cleats, brackets, etc. conforming to Fe-410- W(Gde-E-250) quality-B complete all as specified and directed by Engineer-in-charge.

M&L for Cement concrete in foundation, fillings & mass concrete Type B2 1:2:4 (40 mm graded aggregate) complete all as specified and directed by Engineer-in-charge.

M&L preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge.

M&L fixing of MS ladder including supporting bars/MS plates in stone masonary wall with drilling or any other suitable method to walls with inserting holdfasts in cement mortar 1:3 or cement concrete 1:2:4Type B-1 as required ®securing plates if necesssary masonary work may be carried & including making good to wall surfaces complete all as specified and directed by Engineer-in-charge.

Material and labour for point wiring surface type with two single core 1.5 Sq mm (nominal area) FRLS PVC insulated and unsheathed,multi-stranded, copper conductor cable in and including suitable size PVC casing capping with all fittings and fixing accessories and suitable size PVC box for mounting switches, regulatorete including multi-strand PVC insulated unsheathed stranded copper cable as earth continuity conductor of size 1.5 Sq mm and connecting to light fitting/fans etc complete all as specified and directed for following :- (colour code to be followed).

(a) One light point controlled by one, one way switch

(b) One celling / exhaust fan point controlled by one, one way switch.

(c) One socket outlet 5 Amps 5 Pin on independent board

All as per item No 2 here in before but with cable size 2.5 Sq mm for one 5 pin 15 Amps socket out let on independent board and multistrand insulated copper earth continuity conductor of size 2.5 sqmm complete all as specified and directed by Engr-in-Charge.( circuit to be laid seperatly )

M/L for modular switch 6 Amps single pole one way. (Make: Anchor /Indo Asian/ legrand/ABB) complete all as specified and directed by Engr-in-Charge

M/L for modular socket outlet 2/3 pin 6 Amps combined 2 module. (Make: Anchor /Indo Asian/ legrand/ABB) complete all as specified and directed by Engr-in-Charge

S & F modular socket multipurpose 3 pin 6/16 Amps 2 module(Make: Anchor /Indo Asian/ legrand/ABB) complete all as specified and directed by Engr-in-Charge

S/F ceiling rose , 3 phase/pvc/polycarbonate, isolated body.(Make: Anchor /Indo Asian/ legrand/ABB) complete all as specified and directed by Engr-in-Charge.

M/L for modular switch 16 Amps single pole one way, one module.(Make: Anchor /Indo Asian/ legrand/ABB) complete all as specified and directed by Engr-in-Charge.

Supply & fixing modular white cover plate with frame for fixing of modular switches of following :-

(b) Ditto but 3 module. (Make: Anchor /Indo Asian/ legrand/ABB)

(c) Ditto but 6 module (Make: Anchor /Indo Asian/ legrand/ABB)

(c) Ditto but 2 module (Make: Anchor /Indo Asian/ legrand/ABB)

S & F blank speacer plate for single module, complete all as specified and directed by Engr-in-Charge (Make: Anchor /Indo Asian/ legrand/ABB)

S&F MCB TPN 63 Amps 240 Volts 10 KA rating, complete all as specified and directed by Engr-in-Charge Make:- Indo Asian/L&T/Havells

S&F connection and testing MCB SPN 240 volt `C' series breaking capacity 10 KA of rating 40 Amps. complete all as specified and directed by Engr-in-Charge.

Supply and fixing LED light fitting 1X16W, 220V,AC decorative box type with driver holder including LED tube liht connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete1200mm basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver. Make:Havells/Bajaj/Crompton/Philips or quivalent make.

Supply, laying, jointing and connecting, LT UG cable XLPE insulated , PVC bedded , galvanised steel strip or wire armored, electric power cable ( heavy duty) 1100 volts grade with stranded aluminium conductor of size 25sqmm 3 core ,laid on poles / walls / in ducts / passing through pipes etc including jointing materials such as cable glands, lugs etc and including taking down unserviceable cables from pole/wall/duct/pipes complete all as specified and directed by Engineer-in-Charge.

M&L for sub main wiring with two single core 1.5 Sqmm PVC FRLS insulated unsheathed cable multi-stranded , unsheathed, copper conductor cables 1100 V grade drawn through & including PVC casing/caping of suitable size fixed to wall/ceiling etc including 1.5 sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, copper conductor cables green in colour as earth wire and duly connected to earth test point complete all as specified and directed by Engineer-in-Charge.( Make: Havells /Polycab/Plaza/Finolex/KEI. (Note: Two run of 1.5 sqmm and one run of 1.5 sqmm earth wire including PVC conduit should be measured & paid as one length).)

M & L for sub main wiring with two single core 2.5 Sqmm PVC FRLS insulated unsheathed cable multi-stranded , unsheathed, copper conductor cables 1100 V grade drawn through & including PVC casing/caping of suitable size fixed to wall/ceiling etc including 2.5 sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, copper conductor cables green in colour as earth wire and duly connected to earth test point complete all as specified and directed by Engineer-in-Charge.( Make: Havells /Polycab/Plaza/Finolex/KEI. (Note:- (Note: Two run of 2.5 sqmm and one run of 2.5 sqmm earth wire including PVC conduit should be measured & paid as one length)

Supply and fix exhaust fan AC ,steel body AC singlr phase 230Volts of size 230mm sweep with blades and rame and louvre complete fixed and opening of wall with suitable MS bolts, grouted to wall and connecting up including provision of cable from connector to fan with flexible cable 24/0.2mm with copper conductor and necessary fitting arrangements complete all as specified and directed Engineer-in-Charge. Make - Havells/Crompton/Bajaj or any equivalent approved make.

S&F ceiling fan, complete with blades, down rods, electronic regulator and accessories, 230V, 1200mm sweep.Min air delivery 210 CFM with service value 6.00BEE.Five star ratedwith brushless direct current motor(BLDC) complete all as specified and directed by Engineer-in-Charge. Make - Havells/Crompton/Bajaj or any equivalent approved make.

M&L earthing complete with GI earth plate Electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth plate not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanished earth wire 4.0 mm dia by means of bolts, nuts check and washers of G I or steel all as shown in electrical plate No. 3 of SSR Pt -I connected to earthing test point all as specified or indicated including GI pipe 15 mm dia light grade for earth wire protection, necessary excavation, earth work in any type of soil, PCC chamber and RCC cover slab, connecting lead wire from test point to DB complete all as specified & directed by Engineer-in-Charge.

SNEH CORPORATION

vinayandsons