DAY TO DAY MAINTENANCE OF B/R WORKS, PERIODICAL SERVICES AND CLEANING/REPAIR AND REPLACEMENT OF SEWAGE LINE, MANHOLE, DRAINS ETC IN VARIOUS LABS (LASTEC, JCB, MHSU (I), OTM/RESIDENTIAL AREA CEPTAM, MES BLDG AND INSTALLATION ETC) AT METCALFE HOUSE AND

Amount

Repairs to leaking in bib tap, pillar tap, stop cock, Angle valve and low level flushing cistern etc of any description by changing the washer, Faces etc complete all as specified and directed.

S&F in repairs PVC connection 15mm dia 45cm long with 2 Nos PTMT checknuts with washer complete all as specified and directed.

S&F in repairs chromium plated brass shower rose 125mm dia with swivel joint complete all as specified and directed.

S&F in repair 15 mm dia PVC bib tap standard of PTMT any colour high pressure screwed for iron pipe complete all as specified and directed.

S&F in repairs 15mm dia bib tap cast copper alloy but fancy type chromium plated long body complete all as specified and directed.

S&F in repairs 15 mm bib tap chromium plated brass complete all as specified and directed.

S&F in repair 15 mm bore, Pillar Cock with 190mm Extension Body, fancy type, cast copper alloy, chromium plated, high pressure with all fittings, screwed for iron pipe complete all as specified and directed. (Make: Jaquar Cat No. KUP-35021PM or equivelant in MARC/ESS ESS.

S&F in repair 15 mm dia stop valve cast copper alloy chromium plated with long shank (concealed type) screwed down high pressure chromium plated complete all as specified and directed.

S&F in repair 15 mm dia angle valve brass chromium plated complete all as specified and directed.

S&F in repair, 15mm bore, bib tap, 2 way, fancy type cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. (Make: Jaquar Cat No. FLR-5041N or equivelant in MARC/ESS ESS.

S&F in repair 15mm dia ball valve high pressure of PTMT complete with aluminium rod and polyplast ball complete all as specified and directed.

All as per item Ser No 11.00 above but 20mm dia.

S&F in repair 32 mm dia waste fittings brass chromium plated complete all as specified and directed.

All as per Item Ser No 13.00 above but 40mm dia.

S&F in repair small fittings galvanised iron medium grade such as sockets, elbow, nipple, tee, union etc for 15mm bore pipe (ISI Mark) complete all as specified and directed.

All as per Item Ser No 15.00 above but for 20mm bore pipe.

S&F in repair 32mm dia PVC waste pipe for WHB/Urinal/Sink 60cm long with union complete all as specified and directed.

All as per Item Ser No 17.00 above but 40mm dia.

S&F in repair 10 litres capacity PVC low level flushing cistern with syphone handled level PVC bend including connecting to WC and fixing on walls with bracket complete all as specified and directed.

S&F in repair flush pipe PVC for low level flushing cistern including jointing to WC complete all as specified and directed.

S&F in repair 25mm dia ball valve high pressure of PTMT complete with aluminium rod and polyplast ball complete all as specified and directed.

S&F in repair 15 mm bore, Health Faucet with 8mm dia, 1.2 Meter long brass chromium plated flexible tube & wall hook with N.R.V (Back Flow Preventer) with all accessories complete all as specified and directed. (Make: Jaquar Cat No. ALD-577 or equivalent in Cera/Parryware.

S&F in repair Vitreous China, Under Counter (Counter sunk) Wash Basin of size 550 x 405 x 205 mm, snow white excluding taps fixed on granite slab complete all as specified and directed. (Make : CERA Cat No. S2030105 or equivalent in Parryware/Hindware/Jaguar

S&F in repair brass chromium plated bottle trap 32 mm dia including joining to waste fitting and waste pipe complete all as specified and directed.

S&F in repair brass chromium plated grating 100/125/140 mm dia round/square fix on floor/nahani trap fixed with cement mortar complete all as specified and directed.

S&F in repair plastic water closet seat cover white closed pattern with flat bottom end cover and mild steel chromium plated hanging device complete all as specified and directed.

S&F in repair vitreous china water closet Indian type 580x440 mm pan white with 'P' or 'S' trap front or back inlet footrest including provn of lime concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surface complete all as specified and directed.

S&F in repair vitreous china wash down water closet pedestal pattern white including PVC seat cover with aluminium hinging devices & EWC Jet brass chromium plated with 1.00 mtr long PVC connection pipe and PVC valveless syphonic action type flushing cistern low level 10 litres capacity, white, with inlet, ball valve, float and handle including brackets etc complete all as specified and directed.

S&F in repair 9 mm plywood, grade BWR type BB fixed with screws to timber frame complete all as specified and directed.

S&F in repair vertical veniation blind consisting of aluminium head rail, vanes/louvers 4” wide of approved tint and traverse cord complete fixed in position complete all as specified and directed.

Easing of door/windows shutters (without taking off shutters from the frame) of not exceeding 1 Sqm of panels for easy closing/opening tightning of hinges or changing the position of hinges adjustments of tower bolts sliding bolts etc complete all as specified and directed.

All as per item Ser No 31.00 above but exceeding 1 Sqm and not exceeding 2 Sqm.

S&F in repair 300 mm long aluminium alloy anodised sliding door bolt hasp staple (bolt type) and fixed clips of sheet cast or extruded section fixing bolts of extruded section complete all as specified and directed.

S&F in repair aluminium sheeting 0.56 mm thick fixed to wooden shutters with brass chromium plated screw including cutting to required size etc complete all as specified and directed.

S&F in repair floor door stopper of aluminium alloy body and tongue anodised with drawn steel spring fixed to door with overall length of cover plate 140mm complete all as specified and directed.

M&L securing glass of any description in existing steel frame with oil based putty including removing of old oil putty complete all as specified and directed.

S&F in repair 20mm dia brass chromium plated tubular towel rail of size 60 cm long including brackets complete all as specified and directed.

S&F in repair extruded aluminium alloy handles, fabricated type, anodised 125 mm size complete all as specified and directed.

S&F in repair 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F in repair 100 mm long aluminium anodised hasp and staple safety type including bolt to hinge plate fixed with screws complete all as specified and directed.

S&F in repair 100 mm size steel window handles, (Including welding if required) complete all as specified and directed.

S&F in repair 100 mm hinges MS Butt hinges medium weight cold rolled complete all as specified and directed.

All as per item Ser No 42.00 above but size 75 mm.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for Granite 16 to 18 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking plateforms and like in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite laid over 20mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over 20mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) etc complete all as specified and directed.

M&L for PCC 1:4:8, type D2 (using 40 mm graded mechanically crushed stone aggregate) as in foundation, filling, mass concrete and sub base of floor complete all as specified and directed.

M&L for 75mm thick plain cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) as in sub base of floors complete all as specified and directed.

M&L for Prepainted Chequered cement concrete tiles 30 cmx30 cmx25 mm thick jointed and pointed in neat cement slurry in floors with gray cement and pigment laid over 20mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

S&F in repair 15 mm dia GI steel tubing medium grade galvanised with all new fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repair GI steel tubing medium grade galvanised 20mm dia with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repair rotational moulded polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position 500 litres capacity including disonnecting and refixing the GI pipe, float valve and fittings complete all as specified and directed.

All as per Item Ser No 53.00 above but 1000 litre capacity of tank.

Disconnecting existing tanks, setting aside (or lowering if equired ) for repairs, cleaning etc and hoisting if required reconnecting and refixing in position including cleaning and removing all scales and dirt from tanks and from mouths of circulating pipe etc for 250 litres to 500 litres capacity of tanks complete all as specified and directed.

All as per Item Ser No 55.00 above but exceeding 500 litres and not exceeding 1000 litres complete all as specified and directed.

Dismanting floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for fully vitrified tiles 10 mm thick, in light shade, double charge (Square/rectangular) polished, area of each tile exceeding 0.36 and Sqmm not exceeding 0.81 Sqm, in floors etc set & jointed in neat cement slurry and pointed in coloured cement to match the shade of coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

M&L for fully vitrified tiles on vertical surfaces/dado 8 to 10 mm thick, in light shade, double charge (Square/rectangular) polished, area of each tile not exceeding 0.36 Sqm, in floors etc set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid including over 10mm thick rendering in CM 1:4 on brick wall complete all as specified and directed

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor set & jointed in neat cement slurry and pointed in coloured cement to match the shade of coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

S&F in repair 100 mm long aluminium handles, cast type anodied for aluminium windows complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple etc in wooden/steel frames complete all as specified and directed.

S&F in repair 4 mm thick sheet glass in squares/rectangle not exceeding 0.50 Sqm in each pane fixed with wooden beads or putty (in metal/wooden frames etc) complete all as specified and directed.

All as per item Ser No 63.00 above but exceeding 0.50 Sqm.

S&F in repair 5.5mm thick sheet glass of any tint, ordinary quality and glazing with snap beading and gasket etc for aluminium door & window exceeding 0.5 Sqm in each pane complete all as specified and directed.

Taking down PVC door shutter loosened at joints of styles, by let in for making good and where hinges etc have been removed/loosened from chowkhets or frames and easing etc for complete functional and refixing the same to chowkhats etc complete all as specified and directed.

S&F in repair door closer hydraulically regulated, aluminium body designation No 3, universal type, suitable for door shutter of 851 to 1000 mm in width complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty fixed complete all as specified and directed.

M&L for welding in repair (thickness of metal to be welded not exceeding 06 mm) in any situation and in any floor complete all as specified and directed.

Repair to aluminium door shutter by taking down shutter from frame, opening out joints after taking down glass or particle board, replacing the corner piece & defective members jointing again refixing the glass pane/particle board including rubber gasket etc complete all as specified and directed.

S&F in repair mortice lock, verticle type of brass complete size 100mm and 4 levers complete all as specified and directed.

S&F in repair vitreous china urinal, with all fixing accessories set, of Size:355x340x535mm, Starwhite with grating and union for discharge pipe (excluding flushing cistern, flush pipe & waste pipe) including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete complete as specified and directed. (Make: Jaquar Cat No. URS-WHT-13261 or equivalent in Cera/Parryware/Hindware

S&F in repairs vitreous china Urinal, Half stall type white (excluding flushing cistern, flush pipe and waste pipe) including connections to flushing pipe and outgoing pipes complete all as specified and directed.

S&F in repair urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimun weight 60 gms) complete all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar including cleaning and stacking of serviceable bricks complete all as specified and directed.

M&L for brick work with sub-class 'B' bricks straight or curved on plan exceeding 6m mean radius built in CM 1:6 complete all as specified and directed.

All as per item Ser No 77.00 above but except bricks. Note :- Old unserviceable bricks retreived from item Ser No 76 shall be reused.

M&L for brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

M&L for 15 mm thick plaster on brick work or concrete surfaces in CM 1:4 mixed with WPC as per manufactures instructions finished even and smooth without using extra cement complete all as specified and directed.

Taking down cement plaster/ grit plaster on brick walls, raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L rendering 15 mm thick plaster in CM 1:6 on brick walls or concrete surface, surface finished even and fair without using extra cement complete all as specified and directed.

M&L rendering 15mm thick plaster in CM 1:4 on brick walls or concrete surfaces, surface finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 5mm thick plaster in CM 1:3 on fair faces of brick or concrete surfaces of walls, facia/soffits of slabs etc to be finished even and smooth (w/o using extra cement) including setting coat complete all as specified and directed.

M&L for rough cast plaster including 15mm thick rendering in CM 1:3 on brick work or concrete surfaces complete as specifed in SSR pat -I clause 14.22 complete all as specified and directed. Note :- Rough cast finish to be as below :- After applying the under coat of CM 1:3 and while it is still in plastic state the roughcast mixture consisting of creshed stone or fine gravel aggregate (which is generallly of size between 6 to 12 mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even. The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger aggregate are thoroughly covered.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and directed. Note:- 1. Rate also includes necessary scaffolding to carry out stone grit plaster work upto a height G+6 floor. 2. Payment for providing grooves as specified shall be also includes in quoted rates.

M&L preparation of newly plastered wall surfaces and applying two coats of cement base paint complete all as specified and directed.

M&L preparation of newly plastered wall surfaces and applying two coats of OBD over a coat of 2 mm thick wall care putty in two layers (each layer minimum 1 mm thick) complete all as specified and directed.

S&F in repair Stainless steel sink with drainage board, 1.00mm thick for kitchen or laboratory with plug waste pipe, washers including cantilever cast iron brackets connecting union etc overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) bends any radius complete all as specified and diriected.

Cleaning and greasing the sides of the rolling shutter of any size as well as other moving parts, like spring,roller, wheel etc completed and shutter fully easy functional complete all as specified and directed.

S & F in repairs, Vitreous China wash basin, Table Top Basin, Size:420x420x155 mm, rectangular shape excluding taps fixed on granite slab complete all as specified and directed. (Make : Jaquar Cat No. WHT-905 or equivalent in Cera/Hindware/Parryware

S&F in repair sensor kit with battery for sensor type urinal pot of size 75x50mm for proper functioning complete all as specified and directed.

Note :- (i) Rates also includes for necessary tools and plants which is required for plumber and carpenter to carry out the works. (ii) Minimun 01 No of plumber and carpenter along with necessary tools and materials will be required to report concerned JE incharge on all working days from 0900 hrs to 1700 hrs. (iii) In case of absence of the plumber and carpenter with tools and materials at office complex or on the particular day for which demanded, a recovery of Rs. 1000/- per day for plumber/carpenter shall be effected from the contractor.

M&L for preparation of old plastered or unplastered surface of walls, brooming down or steel wire brushing scrubbing down smoke soot, moulds, moss and efflorescent salts trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.

All as per item Ser No 95.00 above but on ceiling.

M&L for preparation of old plastered or unplastered surface of walls, brooming down or steel wire brushing scrubbing down smoke soot, moulds, moss and efflorescent salts trading oil and greasy spots, filling minor holes with putty and applying one coat of oil emulsion distemper complete all as specified and directed.

All as per item Ser No 97.00 above but on ceiling.

M&L for complete removal of the existing treatment of walls and applying two coats of oil emulsion distemper over 2mm thick wall care putty in two layers (each layer minimum 1mm thick) complete all as specified and directed.

M&L for preparation of old plastered or unplastered surface of walls, brooming down or steel wire brushing scrubbing down smoke soot, moulds, moss and efflorescent salts trading oil and greasy spots and applying one coat of acrylic emulsion weather proof paint complete all as specified and directed.

M&L for preparation of old plastered or unplastered surface of walls, brooming down or steel wire brushing scrubbing down smoke soot, moulds, moss and efflorescent salts trading oil and greasy spots and applying one coat of cement base paint complete all as specified and directed.

All as per item Ser No 101.00 above but two coats.

M&L for applying one coat of synthetic enamel paint over old painted wooden surfaces of any description over 10cm width or girth including preparation of old surfaces complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint over old painted steel surfaces of any descripition over 10cm width or girth including preparation of old surfaces complete all as specified and directed.

M&L for applying one or more coats of french polishing on old surfaces of any description, width or girth including preparation of surfaces complete all as specified and directed.

M&L for preparation of old painted concrete surface over 10cm width and girth (as a kerb stone) and applying one coat of synthetic enamel (ordinary tint) of any description, not otherwise described complete all as specified and directed.

M&L for painting on road hinting/lines with hot applied thermo plastic compound paint confirming to MORTH specified painting as per manufacture's specification/directions, mechanically applied to form 1.5mm thick film on road limit including cleaning and drying the existing dust oil, grease and moisture free surface before applying paint complete all as specified and directed.

Clearing away all grass, cleaninig/brooming to terrace floor, vegetation, saplings, shrubs, brushwood, undergrowth, digging out roots, filling holes and levelling ground, and removing rubbish outside the MoD periphery of the area under clearance complete all as specified and directed. Notes :- (a) The cleaning of grass/vegitable/brushed growing to be cleaned upto 6 (Six) storey and making good with PCC 1:2:4 type B1 and finishing the surface to match the exisitng surface. (b) Rate also includes necessary scaffolding, tools & plants to carry out the job upto a height G+6 floor.

Labour only for removal of blockage and cleaning of manhole (any size) of sewer line including removal of taken out material outside defence land distance not exceeding 5KM complete all as specified and directed. Note: The quoted unit rate is deemed to be included the cost of labour for opening of man hole cover and re-fixing the same after cleaning the manhole.

Labour only removal of blockage and cleaning the floor trap, gully trap, IWC, EWC Wash basin, Urinal pots, bottle trap, in kitchen, lobby, bath room, toilets at any height of floor (Maximum G+7 Floor) including pipe line up to the first manhole, complete all as specified and directed.

Notes for Ser item Nos 109.00 to 110.00:- 1. Rate also includes for necesary tools and plants which is required for execution of item i.e cleaning rod, buckets, bamboos sticks, Kashi etc. 2. Minimum 01 No of safaiwala alongwith necessary tools will be required to report to complaint cell (M'House) to collect the complaint slip from concrened JE on normal working hours from 0900 hrs to 1700 hrs on all working days but on demand for Sundays, Holidays, additional working hours also, contractor shall provide the same to meet the requirements. As per numbers of complaints additional Sweeper/Helper shall also be provided by the contractor but no claim on this account shall be admissible as the payment is to be made per complaint.

Removal of blockage in between two manholes spacing upto 18 meters of underground sewage line of any type and size upto 200 mm dia by means of mechnical rodding with vibrations/drilling concept. A trolley mounted motorized sewer cleaning machine for the execution of item shall have to be provided by the contractor. Blocked material, slugging obtained during execution of this item shall be removed from the site through trolly mounted motor out of defence land. Sewage line between existing two manholes shall be flushed with combined high pressure water jetting cum suction (vaccum type machine suitably mounted on HCV having facilities of hydraulic applications with suitable size of nozzle pipes. Item shall be executed by the contractor upto satisfaction of the Engineer-in-Charge. No extra claim, whatsoever shall be entertained at any stage. Quoted rate shall be deemed to include all aspects mentioned herein complete all as specified and directed.

Excavation in trenches in hard/dense soil not exceeding 1.5 metres wide and not exceeding 1.5 metres deep lines and getting out complete all as specified and directed.

M&L for PVC (SWR) 150mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including dismantling and breaking up existing unserviceable PVC pipe and removal of debris complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregates) as in bed to drain/ sewage pipe including packing under and haunching against the sides of pipes of 150 mm internal dia after they are laid and tested complete all as specified and directed.

S&F 200mm internal dia PVC (SWR) pipes single socketed in any length with rubber led joint, laid in trenches including dismantling old unserviceable pipe complete all as specified and directed.

M&L PCC 1:3:6 type C-2 (using 40 mm graded stone aggregates) as in concrete bed to drain/ sewage pipe including packing under and haunching against the sides of pipes of 200 mm internal dia after they are laid and tested complete all as specified and directed.

S&F 75 mm internal dia PVC (SWR) pipes single socketed in any length with rubber led joint, on walls including dismantling old unserviceable pipe complete all as specified and directed.

S&F 110mm internal dia PVC (SWR) pipes single socketed in any length with rubber led joint fixed to wall with MS clamps including taking down pipes complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed.

S&F PVC (SWR) 'P’ trap 110mm bore complete all as specified and directed.

Returning, filling in hard/dence loose soil including spreading, leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing excavated material/Malba to a distance exceeding 10 KM, including and upto 20 KM above the starting point complete all as specified and directed.

Cutting into existing manhole for connecting new drain pipe of 150mm bore SGSW pipe including making good to pipe and rendering, cutting out existing benching for and forming metering branch channel in cement concrete 1:2:4 type B-1 smooth finished complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in benching for manholes and haunching around manholes frame for setting, coping, holdfast fixing etc including use of necessary form work and finishing exposed surfaces even and smooth using extra cement complete all as specified and directed.

Supply only integral water proofing compound etc complete all as specified and directed.

Demolition of reinforced cement concrete as in RCC slabs, beams, etc drains or manhole covers of any description and in any position not otherwise specifically provided for complete all as specified and directed.

S&F factory made precast heavy duty drain/ manhole covers including MS frame and including reinforcement as per IS 12592 : 2002 with specified thickness complete all as specified and directed.

M&L for Precast RCC work (Nominal Mix) 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in slabs supported on walls, man hole cover ,drain covers ,Shelves etc and like complete all as specified and directed.

M&L for TMT bars of 10mm dia and over, cut to lenghth bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire not less than 0.9mm dia or securing with clips complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F framed work such door, grill railing, cattle trap on open drains using mild steel angle iron, MS flats of sizes as directed with and including provision of MS hings and MS Hold fast fixed complete all as specified and directed. Note:- Contractor shall submit the sketch of cattle trap indicating overall size and independent size of angle iron/bars, MS flats as per site requirement to the GE for approval before execution of this item. Mild steel to be used conforming to Fe-290 Gde E-165.

M&L for preparation of new steel surface of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Disilting and cleaning of open drains of any section manually including desilting soild/semi solid materials of any type vegetation growth and removal of sludge upto a distance exceeding 5.00 KM from the edges of drains etc complete all as specified and directed.

S&F PVC lid for water tanks of 500/1000 litre capacity screwed type with locking arrangments complete all as specified and directed.

S&F in repair cast iron sand cast soil waste and vent pipes in any length with or without ear with cement joint 100 mm bore laid in trenches or in floor complete all as specified and directed.

All as per item Ser No. 135.00 above but fixed on walls with necessary MS clamps.

S&F in repair CI bend any radious diminishing pieces or taper 100 mm bore complete all as specified and directed.

S&F CI branch pieces 100 mm dia ordinary or inverted or with parrallel branch complete all as specified and directed.

Cleaning of septic tanks (sludge/dewatering) of size 2.80x2.80x3.00 mtr, and removal of sludge/water from out of MoD area to any distance complete all as specified and directed.

Clearning of roofs i.e. removal of vegetables, roots, removal of blockage from mouth of rain water pipes and rubbish off from premises, brooming etc up to seven stories buildings complete all as specified and directed.

M&L for area cleaning i.e cleaning of floor, wall tiles, sanitary fittings etc by using floor cleaner (make: Lizol, Gonyle, Koparo or equivalent), in 02 Nos of toilets by using Acid/detergents (Make: Harpic, Action or equivalent), Cleaning of office internal flooring by brooming, sweeping and mopping using floor cleaner removing of a cobweb from walls/ ceiling (approx area 80 Sqm and removing of small grass, vegetables, leaves, dust etc from external office complex by brooming (approx area 120 Sqm) including T&P complete all as specified and directed. Note :- Floor cleaner/Acid/detergent for cleaning shall be provided by the contractor and this aspect shall be deemed to be included in the quoted rates.

Sree Ram Enterprises

DP COMPLEX

m/s Kailash Chander

V.V CONSTRUCTIONS