External power supply internal wiring with power backup arrangement in connection with the work-Improvement of water supply to Ganjam NAC under AMRUT 2.0 Swap-II Reach-IV

INSTALLATION OF 500 KVA TRANSFORMER (PLINTH mounted 11/0.4 KV 500 KVA S/S with boundry. )

POLE WPB GI 160X160 11 MTR

Pressure channel 100X50X6mm, 2.8mtr 2 No with Galvanisation charges

Transformer mounting channel 100X50X6mm, 2.8mtr long 2 Nos.(9.2Kg/Mtr.) with Galvanisation charges.

AB Switch & HG fuse mounting channel 75X40X6 mm,2.8mtr.Long 4 Nos.(6.8Kg/mtr) with Galvanisation charges

Cantilever channel for supporting HG fuse 75X40X6mm MS Angle 1 mtr. Long 2 Nos. (6.8Kg/mtr) with Galvanisation charges

Cantilever channel for supporting HG fuse 50X50X6mm MS Angle 1 mtr. Long 2 Nos. (4.5Kg/mtr)with Galvanisation charges

Angle for cantilever arrangement for AB switch and HG fuse 50X50X6mm 2mtr long each, 2Nos(4.5Kg/Mtr)with Galvanisation charges

Angle for mounting of LT distribution box 50X50X6mm 3mtr long each, (4.5Kg/Mtr) with Galvanisation charges

Disc insulator (T&C) 45KN Polymer

Hardware fitting (T&C) 45KN

11KV AB switch 3 Pole, 400A

11KV HG fuse 3 Pole, 400A

11KV Lighting arrestor 9KV,5KA

LT Distribution Box with MCCB, Alluminium busbar of single bay with Kit Kat fuse for 500 KVA S/s

HT Stay Set (Complete) REC Construction standard

HT Stay Insulator Type -C

Satay Clamp (1.9 Kg /pair)

7/10 G.I . Stay Wire (Grade -2)

G.I Pipe Earthing 40mm Dia medium gauge 3mtr long for Earthing devicee

Earthing for Supports (Coil type)

No.6 G.I wire for earthing

GI Flat (25x6mm) for Neutral & body Earting of DTR

GI Bolts, Nuts & washers

500 KVA ,11/0.4 KV Transformer BIS Energy level -II

LT 3 .5 Core ,50 sqmm PVC cable (unarmoured)

Sundries (Paint, Danger Board, AI Binding tape & wire insulating tape, anti climbing device , Clamp connector, Jumpering materials , Socket & other accessories etc.

Material for earthing including masonary work for earth pit, salt , charcoal and cement plate cover

Concreting of support C.C. 1:1.5:3 for 11 Mtr. WPB Pole

Couping with C.C. 1:1.5:3

Cement concreting for stay anchor plate with C.C. 1:2:4

Construction of brick bondary wall fencing with sand and metal spreading to the new DP mounted DSS

Plinth for Transformer mounting

Brick boundary wall for fencing of 5' height with 9" wall for area 8ft x 12ft

MS Grill gate 1.5mtr (h)x1.5mtr(w), made of 35x35x6mm Angel and 25x6mm flat. (Angel for out side boarder with horizontal & vertical crossing )

Filling Sand

40mm size HBG metal

Sundries for danger board, anti climbing device etc

3Φ 3W 11 KV line with 80 mm2 AAAC Cable = 0.03 Km

POLE WPB GI 160X160 11 MTR

9 Mtr long 300 Kg.PSC Pole for Stud

GI Base plate for support 20 KG

11KV V Cross arm (10.2 Kg each)

GI Back Clamp for ' V' Cros Arm (0.85 Kg each)

11 KV F clamp 2.9 Kg

Top Bracket 100X50mm MS channel (02 Kg each)

Disc insulator (T&C) 45KN Polymer

Hardware fitting (T&C) 45KN

11 KV Pin Insulator polymer

80 mm2 AAAC

Earthing Coil for support

H.T Stay set (Complete)

Stay Insulator

Stay clamp or Stud Clamp

7/10 SWG stay wire

G I Nut,Bol & washer

100X50X6mm. MS Channel for straight cross arm (1.2m X 12 pcs) (9.2Kg/mtr.)+ (0.2m X 8 pcs) (9.2Kg/mtr.)for tapping & cut point pole + Galvanisation charges

Sundries (Paint, Danger Board, AI Binding tape & wire insulating tape, anti climbing device , Clamp connector, Jumpering materials , Socket & other accessories etc

Concreting of support C.C. 1:1.5:3for 11 Mtr. WPB Pole

Couping with C.C. 1:1.5:3

Cement concreting for stay anchor plate with C.C. 1:2:4,

Service Connection

3.5CX300 mm² LT PVC Cable

No 8 SWG 4.06mm dia G.I. Wire

500 AMP Kit Kat Fuse

Insulated Piercing connector Type B main 16 to 300 sqmm& tap- 2.5 to10 sqmm

Neutral connector Type B suitable for main 35-70 sqmm AAAC & TAP -2.5 to 10 sqmm service cable cover by black weather resistant insulation cover

Aluminium binding wire

Sundries

POWER BACK UP WITH INTERNAL WIRING

Power back up LT generator with AMF arrangements and necessary copper cable and electronic governer and dipse controller including electrical inspection by the department

Pumpsets for WS to Ganjam

160 KVA ( For 50HP load )

Installation cost of DG set with change over , cabling , internal wiring of staff Qr. and other installations

Operation and maintenane cost of D.G. set for five years