BID DOCUMENTS FOR PROPOSED FLOATING FOUNTAIN FOR PORBANDAR MUNICIPAL CORPORATION, PORBANDAR.

Total Amount Rs:-

Item Description Quantity Unit Rate Amount

Providing, supplying, installing, testing and commissioning complete floating fountain

system, comprising FRP floater of minimum 28-inch diameter with adequate buoyancy,

vertical jet brass nozzles for 60 feet height and suitable for fountain applications,

submersible pump of 10 HP, 3-phase, designed for continuous underwater operation with

cast iron impeller, delivery casing and motor body, complete with multi-coloured RGB

underwater/wall-mounted LED lights of 18 W, 12 V, IP-68 protected ABS housing with

toughened glass and dynamic colour-changing features. The system shall further include a

programmable controller for RGB lighting with minimum 6–8 station colour-changing

options and voltage conversion from 220 V to 12 V, along with required electrical

submersible cables (3-core flat 1.5 mm copper conductor or as per required), control

valves, fittings, supports and accessories. The work shall include transportation, handling,

installation, anchoring, electrical connections, testing, trial run and commissioning to

achieve uniform fountain display and lighting effects, complete in all respects, as per

manufacturer’s recommendations and directions of the Engineer-in-Charge

Providing, supplying, installing, testing and commissioning complete floating fountain

system consisting of a GI ring of 6 ft diameter fabricated from Jindal make B-class GI pipe of

1.5 inch internal diameter, 25 feet height complete with first-quality brass crown nozzles

(approx. 85 Nos.) of 1/8 inch size with 2 mm bore and nickel–chromium plating for uniform

ring effect, including all bushes, sockets, flanges, control valves and fittings. The system

shall include an FRP floater of 28 inch diameter with adequate buoyancy, a 5 HP, 3-phase

submersible pump suitable for continuous underwater operation with cast iron impeller,

delivery casing and motor body, complete electrical control panel with MCB, OLR, push

2.00 buttons, indicators, voltmeter, ammeter and timer in powder-coated enclosure, multi- 1.00 Job 574942.50

coloured RGB underwater/wall-mounted LED lights of 18 W, 12 V, IP-68 protection

(minimum 6 Nos.), programmable RGB controller with 6–8 station colour-changing options

and voltage conversion from 220 V to 12 V, and required submersible copper electrical

cables (3-core flat, 1.5 sqmm ). The work includes fabrication, transportation, installation,

anchoring, electrical and hydraulic connections, testing, trial run and commissioning to

achieve proper fountain display and lighting effects, complete in all respects, as per

manufacturer’s recommendations and directions of the Engineer-in-Charge

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper

3.00 conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe 450.00 Mtr. 287.85

at road crossing or floor of following size of cable. (B) 3 core 4 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe

at road crossing or floor of following size of cables. (B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm

Supplying & erecting approved make 3 phase motor control cubical panel ( Star - Delta)

made from16 G. CRCA sheet duly painted with epoxy powder painted inside and outside

with hinged doors and locking arrangement, consisting of suitable size of ON- OFF isolator

(AC - 3/23 duty) main fuses, single phasing preventer cum water level. Guard (Complete

unit), Toggle switch to by pass Single phase preventer cum WLG, indicating lamps for R- Y- B

phases, over load relay, Automatic water level controller, Ammeter & Voltmeter each with

two way selector switch incoming wires duly socket Crimped, Panel to be erected on angle

iron frame grouted on wall as directed. Star Delta & main contactor, overload relay,

thermal / Electronic Star delta cutoff timer, start - stop push buttons. The isolator overload

relay & contactors of L& T, Siemens or Cuttler Hamer make only. Panel to be erected on

angle iron frame ground on wall. (B) S/D up to 10 H.P.

PORBANDAR MUNICIPAL CORPORATION - PORBANDAR

DISTRICT - PORBANDAR

BID DOCUMENTS FOR PROPOSED FLOATING FOUNTAIN FOR PORBANDAR MUNICIPAL CORPORATION, PORBANDAR

PROPOSED FLOATING FOUNTAIN FOR PORBANDAR

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for

8.00 laying any size of cable or locating the fault all over the run and back filling the same and 525.00 Mtr. 74.74

making the surface as normal ground.

9.00 (B) If additional machinery like hammer driller or JCB use [Add] 525.00 Mtr. 357.54

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of cable. below ground / road

surface for enclosing cable (A)50 mm outer dia

Total Amounts Rs...………........

Total Amounts Rs...………........

Consulting Civil Engineer City engineer

Dharmesh Deshani (OPC) PVT.LTD. Porbandar Municipal Corporation

Ahmedabad Porbandar