Comprehensive Annual Maintenance Contract for Residential quarters and township at CMPDI Colony, Ranchi for a period of two years ( FY 26-28)

Upkeep AMC Residential

Civil Maintenance Part A

Civil Maintenance Part B

Electrical maintenance Part A

Electrical maintenance Part B

Total impact of GST for the purpose of CTC

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Brooming of entire black top roads including side berms, paver areas of the complex from main gate to all colony primises including all internal roads, offices sorrounding, etc and disposal of collected rubbish, waste at designated places including transportation, labour cost etc. as directed by engineer incharge. the work shall be carried out by mechanical means only including mechanical broomer, and all tools etc(Approx 19134 sqm).Note : In case of partial work done, proportionate rate will be deducted.

Brooming & cleaning of entire CMPDI(HQ) complex Excluding Road and Paver Area disposal of leaves/plastic/ carry bags/waste paper/wrapers/waste materials/branches of trees etc at designated places complete job as per instruction of Engineer-in-charge. (Approx 99006.00 sqm) Note : In case of partial work done, proportionate rate will be deducted.

Brooming/ sweeping sorrounding area of Gondwana CMD and 2 Nos Directors bunglows(A- 1920 sqm) , cleaning of staircase, balcony, floors (A - 400 sqm), mopping of floor area(A-400), dusting of windows ( approx 250 sqm), toilets cleaning ( 12 toilets), open teracce ( 50 sqm) Total area Approx 3020 sqm , including disposal of rubbish , waste at designated places as directed by engineer incharge. (Approx 3020 sqm), Note : In case of partial work done, proportionate rate will be deducted.

Brooming/ sweeping sorrounding area of IICM 3 Nos Directors bunglows(A- 955 sqm) , cleaning of staircase, balcony, floors (A - 400 sqm), mopping of floor area(A-400),, terrace (A- 320 sqm) dusting of windows ( approx 250 sqm), toilets cleaning ( 12 toilets), open teracce ( 50 sqm) Total area Approx 2220 sqm , including disposal of rubbish , waste at designated places as directed by engineer incharge. (Approx 2375 sqm), Note : In case of partial work done, proportionate rate will be deducted.

Door to door collection and seggregation of dry and wet grabage from residential quarters (all Floor) and dumping dry garbage at designated pit and wet garbage in bio fertilizer pit or disposal at Govt designated place as per instruction of Engineer-in-charge. (A Type - 80 Units(G+2) (G+3)- 6 Blocks, B type-178units (G+2),(G+3),(G+4) - 13 Blocks,C type- 131 units(G+2),(G+8) -11 Blocks, D type- 48 units (G+8) - 2 Blocks- Family Hostel -22 Units (G+2) ) Block) Note : In case of partial work done, proportionate rate will be deducted.

Cleaning of all residential building by brooming in common area like stairs,landing,passage,head room,wall, ceiling, lift cage,plinth protection of residential building.(Approx 8729.00 sqm). Note : In case of partial work done, proportionate rate will be deducted.

Cleaning of all residential building by Washing/Mopping in common area like stairs, landing, passage, head room, of residential building.(Approx 8729.00 sqm). Note : In case of partial work done, proportionate rate will be deducted.

Cleaning and removing food waste, party waste materials and washing with detergent of communitybuilding/includes kitchen , etc.,and cleaning surronding area up to 10 m length from the community hall building as per instruction of Engineer-in-charge. Note : In case of partial work done, proportionate rate will be deducted.

Brooming & cleaning of roof & mumty of all Residential buildings ( Approximate area 11347.00 sqm) including disposal of dry leaves & waste materials at designated place as instructed by Engineer-in-charge. Note : In case of partial work done, proportionate rate will be deducted.

Cleaning of storm water drains of the entire complex disposal of debris, dry leaves,bricks bats & rubbish etc. at designated place as instructed by Engineer-in-charge. (Approx 2350.00 m). Note : In case of partial work done, proportionate rate will be deducted.

Cleaning of storm water drains of the entire complex including removing RCC covers where ever required and resetting the same and disposal of debris, dry leaves & rubbish etc.at designated place as instructed by Engineer-in-charge. (Approx 1705.00 m). Note : In case of partial work done, proportionate rate will be deducted.

Disposal of garbage from available collected place, dust bins along the road side of different buildings within campus, building debris, accumulation of the same at one place and subsequent disposal of the same to outside of CMPDI(HQ) complex by tractor/equivalent mechanical means regularly to the designated place by RMC including loading and unloading. All accmulated gabages including building debris should be disposed off as per instruction of Engineer -in-charge. Note : In case of partial work done, proportionate rate will be deducted.

Cleaning of overhead tank, under ground water reservoirs manually/Mechanically, including spreading bleaching powder, brushing the wall and floors and disposal of sludge.dispolsal of waste collected at designated place. Rates includes cost of bleaching, powder, allied materials and labour all complete.(Approx.2534.40 Cum of difefrent tank Capacity). Note : In case of partial work done, proportionate rate will be deducted.

Cutting grass by mechanical means and removal of the rubbish at designated place as instructed by Engineer-in-charge.

Deep Cleaning of all type quarters at the time of shifting / other occasions including moping, cleaning the toilets, dusting of doors, windows, fans, tube lights and removing cob web etc. complete as per instruction of Engineer-In charge.

Providing uniform, safety item like glooves,shoes,Cap, PPE Jacket(Redium flourescent) etc to the contractual labour engaged in the upkeep work(CAMC Work).

Supply of Pump Operator for day to day water supply in Resident at CMPDI HQ (One Pump Operator for each shift i.e. 1st Shift 6:00 am to 2:00 pm and Second Shift 2:00pm to 10:pm) as per instruction of EIC.

Time to time hiring of crane 20 tonne capacity insulated cabin with operator and labour & other accessories required for running of crane for high rise trimming of tree branches, electric pole for repairing electrical work and miscellaneous work at different location of CMPDI.

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

PART A (BASED ON CCL SOR 2024) - Civil Maintenance Works for Residential Quarters

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m inwidth or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. - All kinds of soil. .

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Surface dressing of the ground including removing vegetation and in inequalitiesot exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. : All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:2:4 (1 cement: 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement: 3 coarse sand (zone-III) derived from natural sources: 6 graded stone aggregate 20 mm nominal size derived from natural sources).

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1cement: 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete.

Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform.

Centering and shuttering including strutting, propping etc. and removal of form for : Shelves (Cast in situ).

Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts.

Centering and shuttering including strutting, propping etc. and removal of form for : Weather shade, Chajjas, corbels etc., including edges.

Providing, transporting, hoisting and fixing above plinth level upto foor five level precast reinforced cement concrete in shelves, including setting in cement mortar1:3 (cement: 3 coarse sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but, excluding the cost of reinforcement, with1:1.5:3 (1cement:1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20mm nominal size derived from natural sources).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand).

Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand).

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : cement mortar 1:4 (1 cement : 4 coarse sand).

Half brick masonry with bricks of class designation 75 in superstructure above plinth level upto floor V level in: Cement mortar 1:4 ( 1 cement : 4 coarse sand).

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) - Sal wood.

Providing and fixing factory made single extruded WPC (WoodPolymerComposite) solid door/ window/ Clere story windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (SuspensionGrade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750kg/cum, screw withdrawal strength of 2200N (Face)&1100N (Edge), minimum compressive strength of 58N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In-Charge. (M.Shold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/windowframes, minus 5mm tolerance in dimensions.depth and width of profile shall be acceptable.Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.Frame size 50 x 125 mm.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650kg/cum and screw with drawal strength of1800N(Face) & 900N (Edge), minimum compressive strength 50N/mm2, modulus of elasticity 850N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardantand fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws,all as per direction of Engineer-In-Charge. (Note:stainlesssteel butt hinges and necessary S.S screws shall be paid separately)

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1 st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Providing & fixing nickel plated M. S. pipe curtain rods with nickel plated brackets 25 mm dia (heavy type)

Providing and fixing M. S. grills of required pattern in frames of windows etc. with M. S. flats, square or round bars etc. all complete - Fixed to steel windows by welding.

Providing and fixing M. S. grills of required pattern in frames of windows etc. with M. S. flats, square or round bars etc. all complete - Fixed to openings / wooden frames with rawl plugs screws etc.

Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4rnm wide aperture with matching Aluminium beading

Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete - 250 mm weighing not less than 150 gms

Providing and fixing oxidised M.S. Safety chain with necessary fixtures for doors, (weighting not less than 450 gms).

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws, etc. complete.

Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm.

Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100 mm

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete : Single rubber stopper

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete :Twin rubber stopper

Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer - Using M.S. angels 40x40x6 mm for diagonal braces.

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side / top / centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment) - Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer - Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Steel work welded in built up sections / framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks:1:6 (1cement : 6 coarse sand)

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete - 40 mm thick with 20 mm nominal size stone aggregate

Cement plaster skirting upto 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement - 18 mm thick

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

Providing and laying vitrified floor tiles in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm.

Providing and fixing precoated galvanised iron profile sheets (size,hape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 micronsepoxy primer on both side of the sheet and polyester top coat 15-18microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should besupplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tappingscrews of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost ofpurlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 gramsper sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 micronsusing self drilling/ self tapping screws complete :Ridges plain (500 - 600mm)

Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 gramsper sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 micronsusing self drilling/ self tapping screws complete :Gutter (600 mm over all girth)

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion - Single socketed pipes. - 75 mm diameter.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion - Single socketed pipes. - 110 mm diameter.

Providing and fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion - Single tee with door - 75X75X75mm

Providing and fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion - Single tee with door - 110x110x110mm.

Providing and fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion - Bend 87.5° - 75 mm bend.

Providing and fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion - Single tee with door - Bend 87.5° - 110 mm bend.

Providing and fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion - Shoe (Plain) - 75 mm shoe.

Providing and fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion - Single tee with door - Shoe (Plain) - 110 mm shoe.

Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised- PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete - 75 mm.

Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised- PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete - 110 mm.

12 mm cement plaster of mix : 1:6 (1 cement : 6 fine sand).

6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand).

Neat cement punning.

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applyingprimingcoatswithprimerofapprovedbrandandmanufacture,havingtow VOC (Volatile Organic Compound)content.Withreadymixedpinkorgreyprimeronwoodwork(hardandsoftwood)having VOC content less than 60 grams/ litre

Applying priming coat : With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work.

Finishing walls with water proofing cement paint of required shade : Old work (one or more coats @ 2.20 kg/ 10 sqm) complete

Finishing walls with Acrylic Smooth exterior paint of required shade:Old work (two or more coat applied @ 1.67 ltr/ 10 sqm).on existing cement paint surface

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr / 10sqm

Distemperingwith1stqualityacrylicdistemper(readymixed)havingVOC(VolatileOrganicCompound)contentlessthan50gram/litre,ofapprovedbrand and of required said and colour complete to give and even said. Old work (one or more coats).

Applying priming coats with primer of approved brand and manufacture, having to VOC (Volatile Organic Compound) content With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (VolatileOrganicCompound) content less than 50grams/litre ofapproved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer in charge - Nominal concrete 1:4:8 or leaner mix ( including equivalent design mix ).

Demolishing R .C.C. work, including stacking of steel bars and disposal o f unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Demolishing brick work, manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge - In Cement mortar.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area beyond 3.00 sqm

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead:Of area 3 sq. metres and below.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead:Of area beyond 3.00 sqm

Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 metres lead of:G.S. Sheet

Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 metres lead of:Asbestos Sheet.

Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :75 to 80 mm dia pipe.

Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :100 mm dia pipe.

Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :150 mm dia pipe.

Dismantling G. I. pipes (external work) including excavation and refilling trenches after taking out the pipes, including stacking of pipes within 50 metres lead :15 mm to 40 mm nominal bore.

Dismantling G. I. pipes (external work) including excavation and refilling trenches after taking out the pipes, including stacking of pipes within 50 metres lead :Above 40 mm nominal bore

Dismantling of flushing cistern of all types (C.I. /PVC/Vitrous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink without drain board :610x460 mm bowl depth 200 mm.

Providing & fixing White vitreous china water closet squatting pan (Indiantype) along with ''S"or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba,all complete as per the direction of Engineer-in charge.Orissa pattern W.C Pan of size 580x440 mm.

Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan.

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete - 10 litre capacity-White

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete - Flexible pipe : 32mm dia

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete - Flexible pipe : 40mmdia

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing 600x120x5 mm glass shelf with edges round off supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall - 15 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall - 20 mm dia. nominal bore.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall - 25 mm dia. nominal bore.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall - 40 mm dia. nominal bore.

Providing and fixing G. I. pipes complete with G. I. Fittings including trenching and refilling etc. - External work - 15 mm dia. nominal bore.

Providing and fixing G. I. pipes complete with G. I. Fittings including trenching and refilling etc. - External work - 20 mm dia. nominal bore.

Providing and fixing G. I. pipes complete with G. I. Fittings including trenching and refilling etc. - External work - 25 mm dia. nominal bore.

Providing and fixing G. I. pipes complete with G. I. Fittings including trenching and refilling etc. - External work - 40 mm dia. nominal bore.

Providing and fixing G. I. pipes complete with G. I. Fittings including trenching and refilling etc. - External work - 50 mm dia. nominal bore.

Providing and fixing G. I. pipes complete with G. I. Fittings including trenching and refilling etc. - External work - 80 mm dia. nominal bore.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge 15 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.20 mm nominal outer dia Pipe

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge 25 mm nominal outer dia Pipe

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge 32 mm nominal outer dia Pipe.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 40 mm nominal outer dia Pipe.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 50 mm nominal outer dia Pipe.

Providing and fixing gun metal gate valve with C. I. wheel of approved quality (screwed end) : 25 mm dia. nominal bore.

Providing and fixing gun metal gate valve with C. I. wheel of approved quality (screwed end) : 40 mm dia. nominal bore.

Providing and fixing gun metal gate valve with C. I. wheel of approved quality (screwed end) : 50 mm dia. nominal bore.

Providing and fixing gun metal gate valve with C. I. wheel of approved quality (screwed end) : 80 mm dia. nominal bore.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete: 15 mm nominal bore

Providing and fixing unplasticised PVC connection pipe with brass unions - 45 cm length - 15 mm dia. nominal bore.

Providing and fixing C.P. brass shower rose with 15 or 20 mm inletc : 100 mm diameter

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 15 mm nominal bore.

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 25 mm nominal bore.

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 40 mm nominal bore.

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 50 mm nominal bore.

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 80 mm dia. nominal bore.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing C. P. brass bib cock of approved quality conforming to IS:8931 - 15 mm nominal bore.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15mm nominal bore

Providing and fixing C. P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 - 15 mm nominal bore.

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately): For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item)With float glass panes of 4 mm thickness (weight not less than 10 kg/ sqm)

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement: 4 coarse sand):25 mm thick.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metre lead. For thickness of tiles above 10 mm and upto 25 mm

Chipping of unsound/weak concrete material from slabs, beams,columns etc. with manual Chisel and/ or by standard powerrivenpercussion type or of approved make including tapering of all edges,making square shoulders of cavities including cleaning the exposedconcrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction ofEngineer-In-Charge.25 mm average thickness

Cleaning of reinforcement from rust from the reinforcing bars to giveit a total rust free steel surface by using alkaline chemical rustremover of approved make with paint brush and removing looseparticles after 24 hours of its application with wire brush and thoroughlywashing with water and allowing it to dry, all complete as per directionof Engineer-In-Charge.Bars upto 12 mm diameter

Cleaning of reinforcement from rust from the reinforcing bars to giveit a total rust free steel surface by using alkaline chemical rustremover of approved make with paint brush and removing looseparticles after 24 hours of its application with wire brush and thoroughlywashing with water and allowing it to dry, all complete as per directionof Engineer-In-Charge.Bars above 12 mm diameter

Providing, mixing and applying bonding coat of approved adhesiveon chipped portion of RCC as per specifications and direction ofEngineer-In-charge complete in all respect.SBR Polymer (@10% of cement weight) modifiedcementitious bond coat @ 2.2 kg cement per sqm ofsurface area mixed with specified proportion of approved polymer

Providing, mixing and applying SBR polymer (of approved make)modified Cement mortar in proportion of 1:4 (1 cement: 4 gradedcoarse sand with polymer minimum 2% by wt. of cement used) asper specifications and directions of Engineer-in-charge.25 mm average thickness in 2 layers.

Providing, mixing and applying SBR polymer (of approved make)modified Cement mortar in proportion of 1:4 (1 cement: 4 gradedcoarse sand with polymer minimum 2% by wt. of cement used) asper specifications and directions of Engineer-in-charge.12 mm average thickness.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with waterproofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layerwill be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed withwater proofing cement compound @ 0.126 kg/sqm. This layerwill be allowed to air cure for 4 hours followed with water curing for 48 hours.

Dismantling 15 to 40 mm dia G.I. pipe including stacking ofdismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge. (a) Internal Work- Exposed on wall

Taking out existing CC interlocking paver blocks from footpath/ centralverge, including removal of rubbish etc., disposal of unserviceablematerial to the dumping ground, for which payment shall be madeseparately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

Laying old cement cocrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern overand including 50 mm thick compacted bed of coarse sand, filling thejoints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the departmentfree of cost).

52 mm thick cement concrete flooring with concrete hardener topping under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume .hardening compound is mixed @ 2 litre per 50kg of cement or as per manufacturers specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.

Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade :Two or more coats on new work.

Chequerred precast cement concrete tiles 22 mm thick in footpath &courtyard, jointed with neat cement slurry mixed with pigment to matchthe shade of tiles, including rubbing and cleaning etc. complete, on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).Dark shade pigment using ordinary cement.

Cleaning and de-silting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge.

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

PART B (NON-SOR) - Civil Maintenance Works for Residential Quarters

Cutting re-cutting of new/old existing marble/mosaic flooring as required including cost of oxalic acid and polishing with wax polish etc. all complete.

Dismantling of old GI pipe line (working line) for cleaning etc. and refixing the same (above ground) - 15 mm dia.

Dismantling of old GI pipe line (working line) for cleaning etc. and refixing the same (above ground) - 20 mm dia.

Dismantling of old GI pipe line (working line) for cleaning etc. and refixing the same (above ground) - 25 mm dia.

Dismantling of old GI pipe line (working line) for cleaning etc. and refixing the same (above ground) - 40 mm dia.

Dismantling of old GI pipe line (working line) for cleaning etc. and refixing the same (above ground) - 50 mm dia.

Dismantling of old GI fittings and providing & fixing new GI fittings of approved quality : 15 mm diameter : Tee

Dismantling of old GI fittings and providing & fixing new GI fittings of approved quality : 15 mm diameter : Elbow

Dismantling of old GI fittings and providing & fixing new GI fittings of approved quality : 15 mm diameter : Socket

Dismantling of old GI fittings and providing & fixing new GI fittings of approved quality : 15 mm diameter : Nipple

Dismantling of old GI fittings and providing & fixing new GI fittings of approved quality : 15 mm diameter : Union

Dismantling of old GI fittings and providing & fixing new GI fittings of approved quality : 15 mm diameter : Long thread

Dismantling of old GI fittings and providing & fixing new GI fittings of approved quality : 20 mm diameter : Tee

Dismantling of old GI fittings and providing & fixing new GI fittings of approved quality : 20 mm diameter : Elbow

Dismantling of old GI fittings and providing & fixing new GI fittings of approved quality : 20 mm diameter : Socket

Dismantling of old GI fittings and providing & fixing new GI fittings of approved quality : 20 mm diameter : Nipple

Dismantling of old GI fittings and providing & fixing new GI fittings of approved quality : 20 mm diameter : Union

Dismantling of old GI fittings and providing & fixing new GI fittings of approved quality : 20 mm diameter : long thread

Dismantling of old GI fittings and providing & fixing new GI fittings of approved quality : 25 mm diameter : Tee

Dismantling of old GI fittings and providing & fixing new GI fittings of approved quality : 25 mm diameter : Elbow

Dismantling of old GI fittings and providing & fixing new GI fittings of approved quality : 25 mm diameter : Socket

Dismantling of old GI fittings and providing & fixing new GI fittings of approved quality : 25 mm diameter : Nipple

Dismantling of old GI fittings and providing & fixing new GI fittings of approved quality : 25 mm diameter : Union

Dismantling of old GI fittings and providing & fixing new GI fittings of approved quality : 25 mm diameter : long thread

Providing and fixing C.I. bracket of approved quality for : Wash basin.

Providing and fixing C.I. bracket of approved quality for : Sink.

Providing and fixing C.P.waste of approved quality : 32 mm dia.

Providing and fixing C.P. Soap of Oakley soap dish : Best Quality Make Cera or equivalent Model No F5006106

Repairing of flush cistern including providing and fixing of following accessories : Repairing of syphon washer including accessories e.g. roti washer (not syphon as a whole).

Cleaning of sewage pipe line (soil pipe line) upto three storied : 100 mm dia.

Cleaning of sewage pipe line(soil pipe line) from four storied to eight storied : 100 mm dia.

Cleaning of manhole chamber (inspection chamber).

Providing and fixing PVC washers for bib/stop/pillar cock etc wherever required.

Providing and fixing brass spindle of standard quality- medium

Retrieving submersible pump and motor along with G.I. Pipes from the borewell, dismantling the same and re-installation of the submersible pump and motor along with PVC pipes (provided by department) including necessary connections and commissioning of the pump.

Providing and fixing 24 gauge aluminum sheet to the existing wooden flush door shutters as per instruction of EIC.

Providing and fixing C. P. pillar cock of approved quality conforming to IS standard : 15 mm nominal bore as per approval of EIC.

Providing and fixingHand Shower (Health Faucet) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook with N.R.V (Back Flow Preventer).Make Jaquar (Model No.ALD-CHR-577)

P/F CP brass Wall mounted wall mixture with provision for over head shower with 115mm Long Bend pipe on upper side,connecting Legs & Wall Flange of approved quality : 15 mm nominal bore Make of Jaguar or Equivalent.

Providing and fixing Central Hole Basin Mixer without Popup Waste System with 450mm Long Braided Hoses : 15 mm nominal bore Make of Jaguar or Equivalent.Model No CQT-CHR-23167B.

Providing and fixing 20 mm dia 600 mm long CP towel rod including brackets.

Providing and fixing steel window handle 125 mm.

Providing and fixing Brass foot valve 50 mm

Providing and fixing Brass foot valve 80 mm

Dismantling tile work in wall laid in cement mortar including stacking material within 50 meters lead .for thickness of tiles 5mm to 15mm

Taking out existing M.S grills fixed to steel windows and Refixing the same in the existing window frame by welding as per instruction in engineer-in-charge.:Of area 3.00sq.m. and below.

Cleaning blockages etc. in WC pans, traps and connected soil waste pipe etc. complete to the satisfaction of Engineer Incharge

Facility manager for heading the entire team of residential complex and single point of contact and overall incharge of on time execution of work. He has to provide his own laptop/desktop,perform as data entry operator,attend phone calls,etc. He needs to report to EIC and follow the instruction of EIC for Civil releated work.

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

PART A (BASED ON CCL SOR 2024) - Electrical Maintenance Works for Residential Quarters

Circuit/sub-main wiring in PVC conduit : Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required.

Supplying and drawing following sizes of FR PVC insulated copper conductor single core cable in the existing surface/recessed steel / PVC conduit as required.

Supplying and fixing following piano type switch/socket on the existing switch box / cover including connections etc. as required :

Supply and fixing 3 pin 5 A, ceiling rose on the existing junction box/wooden block including connection etc as required.

Supplying and fixing of call bell/buzzer suitable for single phase, 230 volts, complete as required.

Wiring for light point / fan point/exhaust fan /call bell point with 1.5 sqmm FR PVC insulated,copper conductor, single core cable in surface/recessed steel / PVC conduit , with piano type switch , phenolic laminated sheet,suitable size M.S. box and earthing the point with 1.5 sqmm FR PVC insulated copper conductor single core cable etc as required.

Supply and fixing 5A to 32 A rating 240/415V ,10 kA "C"- curve miniature circuit breaker suitable for inductive load for following pole in the existing MCB DBs complete with connections , testing , commissioning etc. as required.

Supply and fixing following rating double pole 240V , isolater in the existing MCB DBs complete with connections , testing , commissioning etc. as required.

Supplying and fixing following rating, four pole ,415V isolator in the existing MCB DBs complete with connections, testing and commissioning etc. as required.

Supplying and fixing following way single pole and neutral sheet steel MCB distribution board ,240V , on surface / recess complete with tinned copper bus bar , neutral bus bar , earth bar , din bar , inter connections, powder painted, including earthing etc. as required. (But without MCB/RCCB/Isolator).

Supply and fixing of PVC angle/ batten Holder including connections etc as required .

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnatic release and terminal spreaders in existing cubical panel board including drilling holes in cubical panel ,making connections etc. as required .

Supplying and fixing following size/modules, G.I. box alongwith modular base & cover plate for modular switches in recess etc. as required.

Supplying and fixing following modular base & cover plate on existing modular metal boxes etc. as required.

Supplying and fixing following modular switch/socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required :

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connection but excluding modular plate etc. as required.

Supplying and fixing Cable End Box (Loose Wire box) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 Volts,on surface/ recess, complete with testing and commissioning etc. as required.

Supply and making srtaight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVCinsulated and PVC sheathed /XLPE aluminium conductor cable of 1.1KV grade as required.

Laying of one number PVC insulated and PVC sheathed /XLPE power cable of 1.1KV grade of following size direct in ground including excavation, sand cushioning and protective covering and refilling the trench etc as required

Laying of one number PVC insulated and PVC sheathed /XLPE power cable of 1.1KV grade of following size direct in ground including excavation and refilling the trench etc as required ,but excluding sand cushioning and protective covering.

Laying and fxing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

PART B (NON-SOR) - Electrical Maintenance Works for Residential Quarters

Supply and fixing of PVC board of different sizes with backelite sheet on top.

Supply and fixing of Capacitor as required

Supply and fixing of top (Make - Havells, HPL, Bajaj, Anchor, Panasonic, Polycab, HPL, Syska, Philips or equivalent make).

Supply and fixing of following ratings busbar chambers (Make - Havells, HPL, Bajaj, Anchor, Panasonic, Polycab, HPL, Syska, Philips or equivalent make).

Supply of material 1.1 KV grade single tape armoured aluminium cable of following sizes ((Make - Havells, HPL, Bajaj, Anchor, Panasonic, Polycab, HPL, Syska, Philips or equivalent make).

Supply and fixing of 400 mm way wall mounted fan (Make - Havells, HPL, Bajaj, Anchor, Panasonic, Polycab, HPL, Syska, Philips or equivalent make).

Supply and fixing of 9" (230mm) metal exaust fan (Make (Make - Havells, HPL, Bajaj, Anchor, Panasonic, Polycab, HPL, Syska, Philips or equivalent make).

Supply and fixing of 10/12 W LED Surface Ceiling light round/square as required : (Make - Havells, HPL, Bajaj, Anchor, Panasonic, Polycab, HPL, Syska, Philips or equivalent make).

Supply and fixing of Recess mounting Led Panel light (Make - Havells, HPL, Bajaj, Anchor, Panasonic, Polycab, HPL, Syska, Philips or equivalent make).

Supply and fixing of LED street light (Make - Havells, HPL, Bajaj, Anchor, Panasonic, Polycab, HPL, Syska, Philips or equivalent make).

Supply and fixing of LED flood light (Make - Havells, HPL, Bajaj, Anchor, Panasonic, Polycab, HPL, Syska, Philips or equivalent make).

Supply and fixing of 9 W LED bulb : (Make - Havells, HPL, Bajaj, Anchor, Panasonic, Polycab, HPL, Syska, Philips or equivalent make).

Supply and fixing of 15/16 W LED bulb (Warm/ White) : (Make - Havells, HPL, Bajaj, Anchor, Panasonic, Polycab, HPL, Syska, Philips or equivalent make).

Supply and fixing of LED batten light tube fitting 20/22 W LED 6500k (Make - Havells, HPL, Bajaj, Anchor, Panasonic, Polycab, HPL, Syska, Philips or equivalent make).

Approved make LED Bollard fitting with rectangular shape, height 600 to 850mm, 8/9Watt with Die cast aluminium housing opel with PC diffuser, IP:65/ 54IS :10322 part 5

Approved make LED Bollard fifting with cylindrical shape and inverted cone shape head, height 600 to 850mm, 8/9W with Die cast aluminium housing opel with PC diffuser, lP:65/5a IS:10322 part 5

Labour charge for material transportation, and other work needed labour (one labour/hr.)

Electrical fault rectification and rearrangement of existing lines / installation / cables /etc without material by deployment of (one electrician and one helper per shift per day with electrical ITI or diploma holder or valid electrical licence holder ( deployment as per EIC )

Facility manager for heading the entire team of residential complex and single point of contact and overall incharge of on time execution of work. He has to provide his own laptop/desktop,perform as data entry operator,attend phone calls,etc. He needs to report to EIC and follow the instruction of EIC for Electrical releated.