REPAIRS TO BOUNDARY WALL IN ZONE B AREA AT AHMEDABAD

Amount

Demolition of brick work or stone masonary built in cement mortar including quions, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and disposing off the rubbish materials where directed a complete

M&L for brick work with sub class 'B' bricks old size straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6, complete.

M&L for 15mm thick rendering in CM (1:4) on brick work or concrete surface mixed with water proofing compund incl chajja, facia etc, finished surface even and smooth without using extra cement complete.

M&L for providing cement concrete type B-0 1:2:4 using 12.50 mm graded stone aggregrate in copings complete.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete.

Dismantling of fencing of barbed wire or any other type of any dia and description complete.

S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flate iron fillets (for securing wire mesh/welded steel wire fabric etc) including all necessary drilling, bolting or riveting etc, and similar work conforming to Fe-290 Gde E-165 complete

Fixing only mild steel posts and struts in fencing including all necessary drilling, bolting or riveting etc, and similar work conforming to Fe-290 Gde E-165 complete.

S&F galvanized, 2 strand, mild steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins etc. complete. (Note : each line wire to be measured)

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete.

M&L for applying two coats of cement base paint on new plastered surfaces of wall over a coat of primer complete.

M&L for preparation of old steel surfaces of any description postion and location not otherwise described over 10cms width or girth and applying one coat of synthetic enamel paint (ordinary tint) on steel surfaces complete

S&F Mild steel TMT deformed bars 10mm dia and over cut to length, bent to shape as required including binding with mild steel wire not less than 0.90mm dia (annealed) complete.

S&F for concertina coil including fastner clip, seel hug rings with dia of 600 mm stretchable to obtain 550 effective dia all as shown in drawings, specified & described in manufactures instruction complete.

Shreeganesh Construction

chhaba construction

SNEH TRADERS

DMA PROJECTS

TECH SERVE SOLUTIONS