Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹40.3 LAccepted-AOC | L-1 | Accepted-AOC lowest | |
| 2 | L-2₹43.0 L+₹1.6 L (3.89%)Rejected-AOC | L-2 | Rejected-AOC other than lowest | |
| 3 | L-3₹43.0 L+₹1.6 L (3.97%)Rejected-AOC | L-3 | Rejected-AOC other than lowest | |
| 4 | L-4₹43.3 L+₹1.9 L (4.63%)Rejected-AOC USHKARA BALA DISTT BARAMULLA J K 193101 | BARAMULLA | BARAMULLA | JAMMU AND KASHMIR | 193101 | L-4 | Rejected-AOC other than lowest | |
| 5 | L-5₹45.0 L+₹3.6 L (8.77%)Rejected-AOC | L-5 | Rejected-AOC other than lowest |
Tender Value
₹36.8 L
EMD Value
₹74,000
Closing Date
28 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 969 EWS
GE 969 EWS C/O 56 APO
SPECIAL REPAIR TO BLDG NO TNC47 AND TNC 48 OR LIVING OF 372 FD COY BLDG NO TNC 50 AND TNC 24 OF 11 DOGRA REGT AND BLDG NO T11 H MT GARRAGE OF 12 INF BDE SIG COY AT URI UNDER GE 969 EWS
2022_MES_531142_1
CANO 969/WS- /2022-23
Open Tender
Civil Works
Item Rate
180 days
URI
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
GE 969 EWS
₹74,000
Yes
13 Aug 2022
15 Jun 2022
30 Jul 2022
15 Jun 2022
28 Jul 2022
30 Jun 2022
Amount
Dismantling wall and ceilling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness, cover fillets etc complete all as specified.
M&L 4mm thick veneered decoretive, Plywood grade 1 (BWR resin) with decoretive face veneers on one faces , fixed with nails to timber frame work on wall complete all as specified.
M&L 4mm thick veneered decoretive, Plywood grade 1 (BWR resin) with decoretive face veneers on one faces , fixed with nails to timber frame work on ceiling complete all as specified.
Dismantling of timber scantling 40 Sqcm and over in section in any position in unframed work.
Excavating in post holes( or similar holes) each n exc 0.5 cum , getting out, retunring, fillingin and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm in any type of soil complete all as specified..
M&L for PCC 1:4:8 Type D-2 (using 40mm graded Agg) as in foundations, filling and mass concrete all as specified and as directed by Engr-in-Charge.
S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240.
S & F rolled mild steel in roof trusses(framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing(Beam,tee, angle, channel or flat sections)incl distance pieces, cleats, etc conforming to grade Fe-410W-(Gde E-250 Quality A).
S & F MS bands, straps, supports or stays for rainwater, ventilating pipes, including bolts if reqd, hooks(stay), hook and pintle hinges, large hasp and staples, clamps, hold fasts, wall ties, plain angle cleats for securing purlins to wood trusses or rafters and similar small articles confirming to Fe-290 Gde E-165.
S & F 100 mm thick cement concrete type C-2 1:3:6 ( 40mm Graded agg) of rough and even surface all as spd
Material and labour, Cement Concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less and finishing the surface with brooming, complete all as specified and directed.
M&L for second class soft wood (Kail) clean swan timber fixed in scantling.
All as per Ser item No 12 above but except timber complete all as specified and directed. (Note : Serviceable timber obtained from ser item No 4 above to be used).
Dismantiling of timber fillets rails, posts rafter purlins etc under 40 Sqcm in section in any position in framed work
S&F second class hardwood plain fillets square, rectangular in section exc 13 Sqcm & not exc 25 Sqcm complete all as spedified and directed
S&F second class hardwood plain fillets square, rectangular in section exc 6 Sqcm and not exc 13 Sqcm complete all as spedified and directed
S&F 2nd class hard wood plain soild, straight chowkats and frame wrought, framed rebated on soild, rounded or chamfered, put together with pinned at joints complete all as specified and directed.
Dismantling of boarding any description fixed in any position with nails .
M&L, for weather boarding of 2nd class softwood, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps complete all as specified and directed.
All as per Ser item No 19 above but except boarding complete all as specified and directed. (Note : Serviceable boarding obtained from ser item No 18 here-in-before to be used).
Taking down chowkats with shutters (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 sqm each
Taking down chowkats with shutters (without taking off shutters from the frame) N .exc 1.5 Sqm each
S&F facia boarding of 2nd class soft wood planed one side with but joints 20mm thick and champhered one side and the boarding is matched.
S&F 35 mm thick, 2nd class hardwood, plain, framed, pannelled shutters (any number of pannel) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face venner; supplied and fitted to chowkats, complete all as specified and directed.
S&F 35mm thick 2nd class hardwood glazed & skeleton shutter open rebated and prepared to receive glass or wire mesh gauge etc (without sash bars) edges of framings plain, chamfered or rounded, fitted with cut and mitred beads for securiny glass etc size of members of shutters as spd in SSR Part-II section 8 clause 8.23(a) complete all as specified and directed.
S&F 30mm thick 2nd class hard wood glazed & skeleton window shutter open rebated and prepared to receive glass or wire mesh gauge etc (without sash bars) edges of framings plain, chamfered or rounded, fitted with cut and mitred beads for securiny glass etc size of members of shutters as spd in SSR Part-II section 8 clause 8.23(b)
S&F 100mm size MS butt hinges medium weight cold rolled complete all as specified and directed.
S&F 75mm size MS butt hinges medium weight cold rolled complete all as specified and directed.
S&F 150mm length aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 100mm length aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 150mm length aluminium anodised handle cast type complete all as specified and directed.
S&F 75mm length aluminium anodised handle cast type complete all as specified and directed.
S&F 250mm long aluminium alloy, anodised, sliding door bolts plate type stove enameled black with bright bolts not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple complete all as specified and directed.
S&F 300mm ordinary rat tail rod pattern springs including rooler and roller plate of mild steel complete all as specified.
S&F 3.00mm thick sheet glass ordinary quality and glazing with oil putty or with wooden beads n.exc 0.5 sqm in each pane.
S&F Galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.4mm and fixed with tinned tacks or glavanised wire staples
M&L for demolition of cement concrete in ground floor and paving n.exc 15cm thickness (below or above ground level) and removal from site complete all as specified and as directed.
S&F 150mm length aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 100mm length aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
M&L for PCC 1:2:4 type B1 40mm thick (20mm graded aggregate) as in floors etc complete all as specified and directed.
M&L cement concrete type B-1, 1:2:4 (using 20mm graded aggregate ) as in copping, benching etc complete all as specified.
M&L for PCC 1:2:4 type B1 25mm thick (20mm graded aggregate) as in floors etc complete all as specified and directed.
M&L for PCC 1:2:4 type B1 25mm thick (20mm graded aggregate) as in floors etc complete all as specified and directed.
M&L for Kota stone slabs, 20mm to 25mm thick, machine cut as in flooring of size not less than 0.25 Square metre each, set and jointed in cement slurry and pointed in cement mixed with pigment to match the shade of slab laid over & including screed bed of 15 mm thick in cement mortar (1:4) including rubbing, cutting and polishing (mirror type), complete all as specified.
M&L for chequerd cement concrete tiles 20cmx20cm x22-25mm thick, set jointed and pointed in neat cement slurry with grey cement and pigments machine pressed in floors including screed bed 15mm thick in CM 1:4 complete all as specified and directed.
Taking down cement plaster on brick or stone walls etc incl raking out joints, hacking for key screbbing down with water etc
Rendering 15 mm thick on stone walling surfaces finished even and smooth with using extra cement in cement morta 1:4 complete all as specified and directed.
Dismantling of plain /corrugated steel sheeting, any gauge or thickness including Nainital or similar pattern roof covering.
S&F0.63mm thick grade 'O' with 120gm per sqm zinc coating corrugated galvanised iron steel sheeting with two corrugaion side lap (Horizontal distance of side and end lap shall not be less than 145mm and 150mm respecively fixed with L Type or J Type or cranked hook bolts in roof except sheeting. (Note : Serviceable sheets obtained from ser item No 42 above to be used).
M&L in repair for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
M&L Prepainted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws,all as specified.
M & L sand filling under inter locking paver including watering and consolideration
S&F mild steel plates wind ties for roof incl securing bolts and work confiring to Fe-290 Gde E-165 complete all as specified.
M&L Machine pressed 60 mm precast concrete inter locking paver block any shape with grey cement and pigment over 25mm sand filling size conforming to IS 45658-2006 of 60mm thickness,M-35 Grade complete all as specified.
M&L vitrified ceramic tiles 10mm thick (square/rectangular) polished area of each tiles exceeding 0.18 Sqm but n .exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in whited or coloured cememtn to match dark shade tiles. all as specified including 15mm thick screed bed in CM 1:4 and directed by Engr-in-Charge
M&L vitrified ceramic tiles 10mm thick (square/rectangular) polished area of each tiles exceeding 0.18 Sqm but n .exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in whited or coloured cememtn to match dark shade tiles. all as specified including 15mm thick screed bed in CM 1:4 and directed by Engr-in-Charge
S&F0.63mm thick grade 'O' with 120gm per sqm zinc coating corrugated galvanised iron steel sheeting with two corrugaion side lap (Horizontal distance of side and end lap shall not be less than 145mm and 150mm respecively fixed with L Type or J Type or cranked hook bolts in roof.
ditto as in item No 57 above but except sheeting.
S&F 0.80mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing etc with grade of zinc coating 275.
S& F 0.80mm thick grade 'O' Plain with 120gm per sqm zinc coating, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings.
Preparation of old painted surface of steel , not otherwise described over 10 cm width or grith two coat of synthetic enamel paint ,complete all as as specified.
Preparation of new steel and iron surfaces of any description over 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.
S & F for tubular curtain rails 20mm dia of aluminium anodised complete all as specified.
S&F for Aluminium anodised Brackets fixed in repair for item 63 complete all as specified.
Preparation surfaces, plastered or unplastered new surfaces on wall and applying two coats of cement base pain complete all as specified and directed.
Preparation surfaces, plastered or unplastered old surfaces on wall and applying two coats of cement base paint complete all as specified and directed.
Preparation of old painted surfaces of any descriptoin, not otherwise described, over 10cm witdth or girth and applying two coat of synthetic enamel paint on wooden surfaces
Material and labour, preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth, applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.
Taking down carefully copper/aluminum point wiring (light. Fan, socket or power) complete, incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc.
M&L for point wiring in PVC casing caping with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqm including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor.
(a) One light point/fan point/fan point controlled by one 5 Amps switch one way
(b) One 3 pin 5 Amp switch socket outlet on same board with accessories
(c) One 3 pin 5 Amp switch socket outlet on independent board
S&F switch piano Flush type, single pole, one way 5 amp 240 volts, complete all as specified and as directed.
S&F Socket outlet 2 in 1, 3 pin, 5 Amps, flush type complete all as specified and as directed.
S&F Switch socket combination 2 in1, 3 pin,5 Amps flush type,universsal complete all as specified and as directed.
M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated fire retardant cable of size 2.5 Sqmm as earth continuity conductor.
S&F Switch socket combination 2 in1, 3 pin,5 and 15Amp flush type,universsal complete all as specified and as directed.
Supply and fixing LED lights fitting 1x 22 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
S&F in repairs Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed.
S & Fix Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified.
S&F 1100 V grade heavy duty cable with pvc insulated aluminium conductor served with an inner sheathing of pvc tape and overall pvc sheathed in service connection suspended by insulating hangers not more than 1mtr apart including 4mm suspension wire one twin core cable flat or circular of size 10 sqmm all as specified and directed
S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed.
S & F in repairs MCB, SPN 32 Amps 240 Volts C curve, complete all as specified and as directed.
S & F MCB SP 6 to 32 Amps, 240 Volts, C Curve complete all as specified and directed.
Supply and fixiing LED Bulb 12 Watt.
S & F House service bracket (hook type complete with 3.0m long G.I. pipe 40mm dia Med. grade, two nos900 bends. M.S. hook and stay or guy including taking down.
S & F Bulkhead luminaire comprising of high brightness LEDs 9/10W LED, IP-65/66 complete all as specified and as directed. Make : Havells or equivalent in Bajaj/PHILIPS/CG
S&F in repairs stepped type electronic fan regulator for ceiling fan 1200/1400mm size,230 volts,6 Amps, complete all as specified.
Repair and re-fixing, re-assembling the existing cealing fan in same original position along with cable after rectification of defects such as apply the one coat varinsh for windings, painting fan blades, changing fan bearning, rewinding of fan, write MES no on fan blades including nut, bolts and washers complete all as specified and as directed by Engineer-in-Charge.
M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is ilnclusive of necessary earth work as Excavation, RF and removal etc.
Note:- Schedule of credit Rs.107031.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .