WBPWD/EE/BED/84/e-IT of 2017_18

Amount

Distribution wiring in2x22/0.3 KV (1.5 sq mm) (ph & n) and1x22/0.3?(1.5 sqmm) as ECC single core stranded 'FR' PVC insulated & unsheathed single stranded copper wire ( Brand approved EIC) in 19m bore , 3 mm thik PVC rigid conduit complete with all accessories embedded in wall tolight/ fan / call bell point with modular type switch fixed on modular MS board with topcover plate flushed in wall incl.mending good daage to original finish (Avg run-10 mtr) '

S &F of 5A Modular switch/nos 5A modular socket-1No on existing switch Board ( Make- Legrand)

Supplying and fixing 415V ,6Way TPN MCBDB with ss enclosure double door concealed in wall after cutting the wall & mending good the damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for erthing attachment. ( a) 63 A TPN MCB ( sIEMENS/ legrand / snheider). ( b) 32A, 185 nos. SPMCB ( Make- Siemens/ Legrand/ smheider)

S & F 415V 63AMP TPN Main switch with cable end box on angle iron frame incl connection(Havells)

S & Laying 1.1 K.V. single core stranded FR' PVC Insulated & Unsheated single core stranded copper wire (approved make) of the flowing size cutting affter chanel with PVC polythen pipe on nasanry wall incl. S & Fixing heavy guaze19 mm/25 mm thick poly pipe with original finish. a) 2x10 sq mm + 1x 6 sq mm as ECC.

b)2 x2.5 sq mm + 1x1.5 sq mm as ECC.

S & F 1.1 K.V. 4 core 25 sqmm PVC /a , AR. Cable in wall with 1x10 SWG G.I wire after cutting the wall & mending good as to G.S.

S & F 1.1 K.V. 4 core 6 sqmm PVC /a , AR. Cable in wall with 1x10 SWG G.I wire after cutting the wall & mending good as to G.S.

S & F 1.1 K.V. 4 core 240 sqmm PVC /a , AR. Cable in wall with 1x10 SWG G.I wire in the trench & mending good as to G.S.

S & Fixing compression type gland complete with bras gland & Finishing the end of following XLPE/ PVC armared cables by crimping method incl. S & F item socket .

a) 4 core 25 sq mm XLPE/ PVC Cable

b) 2 core 6 sq mm XLPE/ PVC Cable

S &F of Modulartype AC power unit having 4 module box with starter DP MCB (North west)

Supply Installation of 25A plug on MS box for AC.

Distribution wiring in3x1.5sqmm copper wire in 20 mm PVC rigid pipe with 1 no 5A switch & socket( on Board )

S & F 48" Sweep A.C Ceiling fan computer with all accessories with out Regulator (Make-crompton/Usha)

S & F Electronics socket type fan 400watt Fan Regulator.(Anchor)

I) Supply and fixing of 2'x2' 240V. False celing type LED fittings complete with all accessories philips make cat no RC380B LED 25.

I) Supply and fixing of 2'x2' 240V. False celing type LED fittings complete with all accessories as per direction of EIC(Crompton greaves make)

ii) S &F Fixing clean surface mounting LED Cuminaire on wall/ ceiling

iii) Supply and fixing 240V, single T5 Fulo fittings complete with all accesroies incl. supply of 1 no:28 watt T-5 Lamp (bajaj) cat no -BTIR 128 EBE.

iv) Supply and fixing of 240V False ceiling type LED Down light fittings complete with all accessories philips 03W Ultraslim roundLED.

S & Fixing of 3 modular MS Board with modular cover providing of 1 No. 16A Switch 1No. 16A socket(Make-Anchor)

S & Fixing of 18" M.S down road for fixing of single / twin fluoresent light fitting (2 x 16 SWG )

S & F 12" Exhaust fan (1420 Rpn) with Lover shutter, (make- EPC/ Crompton)

S & Laying of 40 mm dia G.I pipe (M) for Protection

Earthing Installation by 2" dia G.I (M) pipe As per G.S.

S &F earth busbar of galvanized (Hot Dip) M.S Flat with G.I bolt nots, washer.

S & laying 4 SWG G.I wire incl conection

L.W.C. must be quoted manually @1% on the total quoted value else the total quoted rate shall be treated incl. LWC as per rule. N.B. Rate should be quoted inclusive of GST.

T. K. ENTERPRISE

S. A. ENTERPRISE