REPAIR TO FLOORING, PLASTERING, SUNKEN FLOOR AND CONNECTED WORKS AT BADDOWAL UNDER AGE B/R BADDOWAL GE LUDHIANA

Amount

Dismantling brick tiles or terracing tiles, single layers on roof

Demolition mud phuska in roofs any thickness incl platering and leeping(whether full thickness removed or only a part thereof) complete all as specified.

Applying evenly a bitumen tack coat of industrial bitumen 85/25 @ 1.2 kgs/Sqm incl cleaning surfaces complete all as specified.

M&L for rendering 10mm thick on roof surface in cement mortar (1:3) mixed with water proofing compound finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-charge. (Supply only of water proofing compound shall be measured and paid for separately under appropriate item of this Schedule).

M&L for providing APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150gms/Sqm) land on primed surfaces by forced application APP based polymeric membrance complete all as specified and directed by Engineer-in-Charge.

M&L for Plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate average thickness 50mm as in roof padding incl mixing water proofing compound (Dr. Fixit) or equivalent make specified in Appx 'B' as per manufacturers instruction complete all as specified and as directed. Note. water proofing liquid shall be measured and paid seperately)

M&L for 40 mm thick brick tiles laid on roof surface and joints grouted flush in cement mortar ( 1:3 ) mixed with 5% of crude oil by weight of cement on mud phuska complete all as spd and directed.

M&L for 40 mm thick brick tiles laid on roof surface and joints grouted flush in cement mortar ( 1:3 ) mixed with 5% of crude oil by weight of cement on mud phuska complete all as spd and directed but except tile.

Removing mortar from and cleaning bricks, stacking for measurement including all extra handling and removal and disposing off rubbish

Supply only Integral water proofing compound.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for Non - skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

All as per item No 12 above but for work on vertical surfaces such as skirting risers to steps etc

M&L for glazed ceramic coloured tiles in vertical surface 300x450x7mm thick, set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

M&L for 15-18 mm thick granite (of any type) work (table rubbed and polished) cills, cooking platforms, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including edge moulding including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed..

M&L for machine cut kota stone slab flooring 18-20 mm thick laid on screed bed 15 mm thick in cm (1:6) and jointed with greay cement slurry mixed with pigment to match the shade of slab including cutting, rubbing and polishing complete.

M&L for machine cut kota stone slab 20 to 25 mm thick in riser of steps, skirting, dado and pillar laid over 10mm thick screed in cm (1:4) and jointed with greay cement slurry mixed with pigment to match the shade of slab including cutting, rubbing and polishing complete.

M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded aggregate) as in mass concrete.

M&L for PCC 1:2:4 type B-1 ( using 20 mm graded crushed stone aggregates) Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edgescomplete all as specfied and directed.

Taking down steel water tubing of 15 mm dia bore incl connection.

Taking down steel water tubing of 20 mm dia bore incl connection.

S&F for Mild steel GI tubing 15 mm bore medium weight fixed to walls and floor complete all as specified and as directed..

S&F for Mild steel GI tubing 20 mm bore medium weight fixed to walls and floor complete all as specified and as directed..

S&F for Mild steel GI tubing 40 mm bore medium weight fixed to walls and floor complete all as specified and as directed..

S&F for stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl 410mmx 330mmx 160mm complete all as specified and directed.

S&F for vitreous China wash basin, white or in matching colour of tiles , flat back, size 550x450 mm excluding taps,but including 32 mm dia waste coupling chromium plated brass and PVC waste pipe 750 mm long( Minimum), chain and plug and porcelain stopper, brackets for fixing any size, including cutting for and pinning in ends of brackets or erecting stand as directed by EIC fixed in repairs.

M&L for pillar taps, cast copper alloy 15 mm bore, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs.

S&F for 25 mm dia fancy type mild steel, chromium plated curtain rod fixed in position with fixing brackets , stops, rollers, etc. complete all as specified and directed.

Supply and fix in repair Vitreous China squatting pan orissa pattern size 580 x 440 mm white with integral foot rests including connection to trap and to flushing pipe, complete all as specified & directed.

Supply and fix in repair 10 ltrs capacity PVC symphonic action type, flushing cistern, low level, white, with inlet,ball valve, float and handle including brackets, fush pipe of polyethylene of low or high density or PVC. 32 mm dia.

S&F for PVC connection 15 mm dia with PTMT nuts of length 450 mm.

S&F for bib cock 15mm with flange, chrome plated fancy type fixed as in repair complete all as specified and directed .

Supply and fixing for angular/ stop cock 15mm with wall flange chrome plated fancy type, fixed in repairs complete all as specified and directed.

Supply and fixing in repair Concealed stop cock, 15mm chrome plated fancy type long shank and cup complete all as specified and directed.

S & F for chromium plated fancy type shower rose with arm 125 mm size including fixing to steel pipe or union

S&F for tubular towel rail brass chromium plated 20mm dia.

S&F for soap dish of chromium plated brass screw fixed to wall

Taking down chowkat with shutter (without taking off shutter from frame) n exc 1.5 sqm each.

Taking down chowkat with shutter (without taking off shutter from frame) exc 1.5 sqm but n.exc 4 sqm Each.

Material and labour for Box type steel window/ventilator made of ERW tube P-section of size 60 mm x 25 mm single rebated outer frame, comprises glazed skelton of ERW tube P-Section size 50mm x 20mm with one/two Nos open able leaf consisting of two Nos Sach bar of T-section 20x3 mm welded to frame with one or no vertical mullion of ERW box type T Section of size 60mm x 25mm and F1 2mm thick welded/screwed to frame for fixing of glass/wire mesh incuding fittings and fixtures like handle, Tower bolt, stopper, Cleat, Pintal Hinges, holdfasts etc complete including cutting holes, making good dismantled portion in PCC 1:2:4 type B-1, all as specified and directed. (a) Holdfast 150mm long of 12mm x 3mm MS flat-04 Nos per window. (b) Handle of Z section 20mm x 25mm, 100mm long-01 Nos per leaf. (c) Z Section stopper 20mm x 25mm, 100mm long-01 Nos per leaf. (d) Cleat 55mm long of hollow square 15mm x 12mm- 02 Nos per leaf. (e) MS pintol hinges size 75mm x 12mm -02 Nos per leaf. Note:- MS guard bars, sheet glass, wire mesh and painting shall be measured and paid seperately.

S&F for sheet glass ordinary quality 3.0 mm thick and glazing with oil putty in squares n. exc 0.50 sqm each pane.

S&F for framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walkways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165.

S&F for solid PVC door/window frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube, supplying and fixing in operating as per specifications given in SSR 2020 (Part-II) complete all as specified and directed.

S&F for factory made solid pannel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stile and plain colour PVC sheet for top rail , lock rail and bottom rail on either side and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rail with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing to frame at site as per specification complete all as specified and directed.

S&F for galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples.

S&F for butt hinges, extorted aluminium alloy with galvanized mild steel hinge pin, anodized and fixed, type B-21

S&F for aluminium anodised barrel tower bolts of extruded section and fixed of size 150 mm long.

S&F for aluminium anodised barrel tower bolts of extruded section and fixed of size 200 mm long.

S&F for aluminium handle Extruded aluminium alloy handles fabricated type anodised of size 150 mm long.

M & L for two coat of synthetic enamel paint over a coat pink primer on wooden surfaces of any description, not otherwise described over 10cm width or girth including preparation .

M & L for two coat of synthetic enamel paint on steel surfaces of any description, not otherwise described over 10cm width or girth including preparation.

M&L for cement concrete 1:3:6 type Co (using 12.5 mm thick stone aggregate) as filled in door frame chamfered angles, Hold Fast and throating, complete all as specified and directed.

Dismantling water tanks of capacity 250 to 500 ltr and removing to store.

S & F for rotational moulded polyethylene water storage tanks of capacity 500 ltr (cylindrical vertical with closed top) hoisted and fixed in position including nipple suitable for water tank.

Dismantling of cast iron or reinforced concrete soil waste and drain pipe, 75/100 mm dia, jointed in cement mortar or lead and taking out of trenches, if required.

S&F for PVC (SWR) 75 mm pipes single socketed in any length with rubber ring joints fixed to walls.

S&F for PVC (SWR) 110 mm pipes single socketed in any length with rubber ring joints fixed to walls.

M&L for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement and fixed with cement concrete type B-1 (1:2:4) complete all as specified

S&F for PVC 75 mm (SWR) bends any radius. .

S&F for PVC 110mm P Trap complete all as specified and directed .

Taking down cement plaster on brick wall etc incl racking out joints hacking for key scrubbing down with water etc. complete all as spd & directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cm 1:4 finished even and fair complete all as specified & directed on external surfaces .

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cm 1:6 finished even and smooth with out using extra cement complete all as specified & directed.

M&L for preparation of new plastered surfaces of walls of any description and applying two coats of distempering of wall with distemper oil emulison (any tint) complete all as specefied and directed.

M & L for preparation of new plastered surfaces of wall and applying three coats of white wash .

M&L for preparation of new plastered surface of wall and applyng two coats of cement base paint over a coat of alkalie resistance priming paint complete all as specified and directed .

M&L for 50 mm thick PCC as in plinth protection/apron type C-1, 1:3:6 (20 mm graded agg) finishing cement surfaces even and fair complete all as specified & directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for.

M&L for 50 mm thick PCC 1:4:8 type D-2 (with using 40mm graded stone aggregate) as in sub base of floor complete all as specfied and directed.

M&L for machine pressed precast concrete interlocking paver block made with grey cement with pigment glossy finish made with white cement any shape and size 60 mm thick confirming to IS 15658-2006 of M-35 grade complete all as specified and directed.

M & L for 40 mm thick sand cushioning under floors or in fdn complete all as spd and directed.

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed.

Demolition of reinforced cement concrete as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas, RCC chulha/chimany and similar suspended work (reinforcement cut as required to facilitate demolition).

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in CM 1:4.

M&L for 40 mm thick PCC 1:2:4 type B-0 (with using 20mm graded stone aggregate) as in coping to Brickwork platform complete all as specfied and directed.