Construction of New Rythu Bazar at Vadderupeta under AMC, Rajamahendravaram in East Godavari District.

Engaging of Dozer (90 hp) for dozers clearing and levelling of site including hire charges, transport charges etc., complete for finished item of work.

Earth work excavation and depositing on banks with an initial lead of 10M and lift of 2Mts. In loamy, clayey, soils like black cotton soils, red earth, ordinary gravel, stony earth and earth mixed with fair sized boulders, including cost and conveyance of all materials labour charges for shoring,strutting,shuttering and bailing out of water if necessary in all conditions such as dry,wet and slushy, including all incidental and operational charges etc.complete for finished item of work as per standard specifications and as directed by Engineer-in-charge at site.

Filling with Sand in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyence of water to the work site and all operational, incidental, labour charges, seignorage charges, hire charges of T & P etc., complete for finished item of work.

Filling with Gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyence of water to the work site and all operational, incidental, labour charges, seignorage charges, hire charges of T & P etc., complete for finished item of work.

Filling with Dust in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyence of water to the work site and all operational, incidental, labour charges, seignorage charges, hire charges of T & P etc., complete for finished item of work.

P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work.

VRCC M-20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering. using cement 400kgs.

For Plinth Beam

For 125mm Thick for Slab

Supplying, cutting and placing HYSD / TMT bar (Fe-500 grade) reinforcement in VRCC works complete as per drawings and technical specifications for bars below 36mm dia including over laps and wastage,where they are not welded including cost and conveyance of steel , binding wire etc., lifting charges of steel , placing in position, tying with binding wire , all tools etc., complete for finished item of work.

ReFilling the foundation trenches with excavated soils including cost and conveyence of all labour charges, watering, ramming and tamping etc., complete for finished item of work etc., as per standard specifications and as directed by the departement engineer in - charge etc., complete.

Providing impervious coat to exposed RCC roof slab surface with CM (1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work.

Brick Masonry in superstructure with CM (1:6) prop: using second class bricks from approved source having minimum crushing strength of 35 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing cement mortar, constructing masonry, scaffolding charges, lift charges, curing, etc., complete for finished item of work.

For Superstructure

Ceiling Plastering 12 mm thick in CM (1:3) sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, seigniorage charges, sales & other taxes on all materials,all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing, etc., complete.

Plastering with CM(1:5) Prop: 12mm thick in single coat including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete for finished item of work.

Plastering with CM(1:5) Prop: 20mm thick in single coat including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete for finished item of work.

VCC M20 Nominal mix using 20mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.

Flooring with Vertified Tiles of 1st. quality of any shade as approved by Engineer - in - charge set over a base coat of CM (1:8) 12mm thick laid over flooring bed / V.R.C.C. slab, with neat cement slurry of honey like consistency spread at the rate of 3.3 Kgs of cement per Sqm and jointed with neat white cement paste to full depth mixed with pigment of matching shade including cost of all materials like cement, sand, water, ceramic tiles etc. to site, seigniorage charges, sales and other taxes on all materials, all operational, incidental and labour charges such as mixing of cement mortar, laying, curing, lift charges etc., complete for finished item of work. Excluding cost of CC bed & Conevyance of all materials BLD CSTN 7.5 vitrified polished floor tiles of size not less than 598 x 598 mm x 8 mm thickness regular finish and normal colours.

Flooring with ceramic tiles 7.30mm thick , 1st quality and of size as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand , water and tiles etc., complete including seigniorage charges etc., complete for finished item of work.

Dadooing to internal walls with ceramic tiles length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like Cuddapah stone, cement, sand and water etc., complete including seigniorage charges, etc., complete for finished item of work.

Painting with plastic emulsion paint of grade-1 standard make to exterior / interior faces of new walls two coat of approved make shade and colour over primer coat with cement primer grade - I including cost and conveyance of materials like Plastic Emulsion paint, white cement to site including cost of brushes, scaffolding charges, lift charges and labour charges such as preparing the wall, applying primer coat , two coats of Plastic Emulsion etc., complete for finished item of work (APSS No.910, 911&1201) in all floors.

Supply of Sintex /Aqua tech or equivalent Polyethylene water storage tank double layer confirming to ISI 12701/96 mark with lid. including cost & conveyance of all materials and all operational and incidental charges etc., complete for finished item of work.

Supply and fixing of Trusses using 60x40 x 2.90mm of 4.90mm length thick Medium class M.S. Rectangular Pipe, 50x30x6mm thick cleats, Baseplates 200x200x8mm thick etc., including cost and conveyance of all Materils and Errecation & Fixing chargers, labour charges for fabrication charges etc., complete.

Supply and fixing of Trusses using 60x40 x 2.90mm of 8.50mm length thick Medium class M.S. Rectangular Pipe, 50x30x6mm thick cleats, Baseplates 200x200x8mm thick etc., including cost and conveyance of all Materils and Errecation & Fixing chargers, labour charges for fabrication charges etc., complete.

Supply and fixing of Trusses using 60x40 x 2.90mm of 6.10mm length thick Medium class M.S. Rectangular Pipe, 50x30x6mm thick cleats, Baseplates 200x200x8mm thick etc., including cost and conveyance of all Materils and Errecation & Fixing chargers, labour charges for fabrication charges etc., complete.

Roofing With 0.5mm thick galvanized /pre painted G.I profiled sheets with crimp of 200mm length fixed to the purlins With 14 size self drilling with neoprene washer Side laps are stiched with self tapping drilling screws .End laps are to be sealed with 25x3 mm Butyl tape .the sheets are provided with anti capillary groove.including cost and labour charges etc., complete as per standard specification for finished item of work.

Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work.

Providing and fixing 35mm thick BRAND FACTORY MADE MOULDED DOOR SHUTTER consisting of sold core single leaf flush door of 30mm thickness, lipped with 15mm (5mmX3) thick X 30mm width on one stiles and top rails and 10mm (5mmX2) thick X 30mm width on the other stiles and bottom rails. The inner panel laminated with 2mm thick termite proof, water proof and fire resistant moulded Pac sheet with 2,4,6 raised panel design in different panel and / or prelam colours on one side after routing the moulded design on flush door and 2mm prelam Pac sheet on other side using rubber adhesive on flush door and solvent cement adhesive on Pac lipping etc. complete as per direction of Engineer- in-Charge, manufacture specification and drawing.

Laying and fixing of Reflective precast concrete blocks for paving of M35 grade and thickness not less than 60mm for medium traffic areas confirming to IS 15658 :2006 in all shapes and designs as per manufactures specification including cost and conveyance of all materials and all labour charges for loading and unloading, laying to desired lines and levels complete excluding cost of cement, sand, water, electricity etc. complete for finished item work as directed by the Engineer - in - charge at site.

Supply and fixing of 100x75mm thick salwood door frame including cost of materials 100mm long M.S hinges 3nos,300mm long S.S aldrop 2nos,aluminium tower bolt 200mm long 1no etc complete including cost of material and labour charges etc complete as directed by the engineer in charge at site.

Providing and fixing factory made UPVC white colour sliding glazed window above 1.50 m in height dimensioncomprising of uPVC multi-chamberedframe with inbuilt roller track and sashextruded profilesdulyreinforced with 1.60±0.2mm thick galvanizedmildsteel section made from roll forming process of required length (shape & sizeaccording to uPVCprofile), appropriatedimension of uPVC extruded glazingbeads, uPVCextruded interlocks and uPVC extruded Inline sash adaptor (ifrequired), EPDMgasket, woolpile, zincalloy (white powder coated) handle ononeside of extreme panel along with zincplated mild steel multi pointlockinghaving transmission gear with keeps, zinc alloy (white powdercoated) touchlock with hook (if required for wire meshpanel), stainless steel (SS 304 grade)body with adjustable double nylonrollers (weight bearing capacity tobe120kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screwsetc. Profileof frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware sand drainage of water etc. After fixing frame the gap between frame and adjacent finished walls hallbefilled with weather proof silicon sealentover backer rod of requiredsize and ofapproved quality, all complete as perapproveddrawing& directionof Engineer-in-Charge inclusive of cost of Single/doublegl asspanes, wire meshand silicon sealent. Two track two panels sliding window made of (big series)frame 67 x 50 mm & sash 46 x 62 mm both having wallthickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension.(Area of window above 2.50 sqm upto 4.00sqm.) Note: For uPVC frame and sashextruded profiles minus 5%to lerance indimension i.e.indepth &width of profile shall be acceptable. Variation in profiled imensioninhighersidesha llbe accepted but no extra payment on this account shall be made.

Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 ofwhite glazedwith 'P' trap inclduing cost and labour charges etc., complet finished item of work.

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water.

Supply and fixing of PVC/SWR pipe - 4 Kg/sq.cm pipe of 1828.8 mm (4'-0") Single Socket etc., complete for finished item of work as per standard specifications and as directed by the Engineer - in - charge at site of work.

Supply and fixing of 20mm dia 1.55mm thick P.V.C. pipe (ISI MARK) As per IS:9537 part III concealed in wall with all requiered accessories including masonary work for light, fan and separate plug point with well seasoned wooden deep box including all labour charges etc., complete markes sudhakar/ Maco plast/ Modi.

Supply and fixing of 25mm dia 1.80mm thick concealed surface PVC pipe (ISI MARK) with all accessories including masonry work and decloams board for switches for light, fan and saperate plug point including all labour charges etc., complete.

Supply of 8 Way TPN DB Horizontal with IP 43, Protection suitable for 24 Nos S.P. out goings and for 1 No 4 pole Incommer etc complete as per IS 8623; IS 13032; IEC 61439-3. Makes: Legrand (Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens / Crabtree Xpro classique-II/L&T-Newrange/Indo Asian-Opti Pro.

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with Modular type 6A switch, Ceiling rose and 12 module covering plate and metal box to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings.

Supply and fixing of 20W, 2000 lumens T8, 1200mm length LED retrofit tube light with aluminium anodised body, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete as per IS 10322 (Part 5/ Sec1)..2012 a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells / Halonix / Jaquar/HPL/GM / GreenLites / Gold Medal/ Eveready b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG.

Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 660 x 460 mm - Single C.P. Pillar cock.

Supply and Fixing of CP Long body bib cock fancy type deluxe heavy duty 12.7 mm dia Indian make including cost and conveyance of all materials and all labour cahrges etc., compelete as per standard specification and as directed by the departmental Engineer-in-Charge. For Toilets

Supply and Fixing of CP Short body bib cock fancy type deluxe heavy duty 12.7 mm dia Indian make including cost and conveyance of all materials and all labour cahrges etc., compelete as per standard specification and as directed by the departmental Engineer-in-Charge. For Bore Well

Supply and Run of 4 of 6 Sq.mm WPSC Aluminium cable of makes Ploycab/V-Guard/ Million/ Payal / Vimal/ Nakodaalong with No.10 SWG G.I Bearer wire on both sides through PVC cleats with all accessories including labour charges etc., complete for service mains.

Supply and fixing in position M.S Ornamental Grill Gates using M.S flats, square rods, angles etc., of approved design weighing, including necessary cuttings, bending, fabrication, welding grinding, and finishing smooth including cost of making holes in RCC or Masonry works and making good the same where ever necessary, including cost and conveyance of all materials, labour charges and all other incidental and operational charges etc., complete as directed by the departmental officers.

Supply and fixing of Well Rings including cost and conveyance of all labour chargers etc., complete for finished item of work.

Supply and fixing of Well Ring Covers including cost and conveyance of all labour chargers etc., complete for finished item of work.