Construction of additional 05 nos. of classrooms at Ghodi , Padaria & Rajghad location in Bharuch District under CSR initiative by DGVCL 2025-26

Name of Work: Construction of additional 05 nos. of classrooms at Ghodi , Padaria & Rajghad location in Bharuch

District under CSR initiative by DGVCL 2025-26

Sr. No. Description Qty Unit Rate Amount

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

1 materials and disposing off the excavated stuff 414.78 CMT 115.92 117.08

upto 50 Meter lead.(A) Loose or soft soil

Excavation for foundation for depth from 1.5 m

to 3.0 m including sorting out and

2 stacking of useful materials and disposing 291.58 CMT 128.52 129.81

off the excavated stuff upto 50 Meter

lead.(A) Loose or soft soil

Filling with the available excavated earth

(excluding rock) in trenches, plinth, sides of

3 foundation etc. in layers not exceeding 20cm in 503.19 CMT 129.10 130.39

depth consolidating each deposited layer by

ramming and watering.

Filling foundation and plinth with murrum or

selected soil in layers of 20 cm. thickness inculding

watering, ramming and consolidation etc.

Brick work using common burnt clay building bricks

having crushing strength not less than

5 kg./Sq.Cm. in foundationand plinth in Cement 69.92 CMT 4725.60 4772.86

Mortar 1:6. (1‐ Cement : 6 ‐finesand)(C) Fly Ash

Masonary work using Aerated light weight concrete

block having crushing strength not less than

kg/sqcm for super structure above plinth level upto

6 floor two level in cement mortar 1:5 ( 1 cement : 5 167.41 CMT 4483.73 4528.57

fine sand ) complete as per

Technical Specification

Brick work using common burnt clay building bricks

having crushing strength not less than

7 35Kg./Sq.Cm. for superstructure in cement mortar 13.05 CMT 4991.25 5041.16

1:6(1 cement :6 fine sand) including curing etc.

complete. (C) Fly Ash Bricks For all heights and all

Half brick in common brunt clay building bricks

having crushing strength not less than

8 Kg/sq.cm in cement mortar 1:4 (1 cement : 4 91.69 SMT 713.79 720.93

coarse sand) (C) Fly Ash Bricks in super structure

including curing etc. complete.For all floors

Providing & laying Cement Concrete 1:4:8 (1

Cement :4 Coarse sand :8 hand brocken stone

9 aggregates of 40mm nominal size) in plinth and 38.77 CMT 2614.07 2640.21

curing complete including cost of formwork. (A)

Foundation and Plinth - At plinth level

Providing and laying cement concrete 1:5:10 (1-

Cement : 5- Coarse sand : 10- hand broken stone

10 aggregates 40 mm nominal size) and curing 9.23 CMT 2452.90 2477.43

complete including cost of formwork in (A)

Foundation and Plinth

Providing & laying Cement Concrete 1:2:4 (1

Cement : 2 Coarse Sand : 4 graded stone

11 aggregate 20 mm nominal size) & curing complete 18.91 CMT 3446.81 3481.28

including cost of form work (A) Foundation and

Plinth -Below Tie beam, Plinth protection & surface

Providing and laying cement concrete flooring

1:2:4 (1-cement : 2-coarse sand : 4-graded stone

12 aggregate 20mm nominal size) laid in one layer 35.96 SMT 280.35 283.15

and finished with a floating coat of neat cement.

(A) 40mm thick.

Providing and laying controlled cement concrete

M.150 for curing complete including cost of

formwork and excluding cost of reinforcement

13 for reinforced concrete work in (A) 36.40 CMT 3866.44 3905.1

Foundations, footings,Base of columns

and Mass concrete (Cement Level 290 Kg)

Providing and laying controlled cement concrete

M.200 and curing complete including the cost of

14 formwork and excluding the cost of reinforcement 10.97 CMT 5923.82 5983.06

for reinforced concrete work in (C) Coping Vertical

and horizontal for all floor (Cement Level 360 Kg)

Providing and laying controlled cement concrete

M.250 and curing complete including the cost of

15 formwork and Excluding the cost of reinforcement 87.88 CMT 4118.08 4159.26

for reinforced concrete work in (A) Foundations,

footings, Base of columns and Mass

concrete.(Cement Level 380 Kg)

Providing and laying controlled cement concrete

M.250 and curing complete including the cost of

16 formwork and Excluding the cost of reinforcement 28.49 CMT 5332.28 5385.6

for reinforced concrete work in Plinth Beams.

(Cement Level 380 Kg)

Providing and laying controlled cement concrete

M.200 and curing complete including the cost of

17 formwork and excluding the cost of reinforcement 3.45 CMT 6944.03 7013.47

for reinforced concrete work in (C) Chajja all floor

(Cement Level 360 Kg)

Providing and laying controlled cement concrete

M.200 and curing complete including the cost of

18 formwork and excluding the cost of reinforcement 47.22 CMT 6237.17 6299.54

for reinforced concrete work in (C) Beams all floor

(Cement Level 360 Kg)

Providing and laying controlled cement concrete

M.250 and curing complete including the cost of

19 formwork and excluding the cost of reinforcement 11.60 CMT 6578.79 6644.58

for reinforced concrete work in (D) Columns, Pillars

posts and struts all floor (Cement Level 380 Kg)

Providing and laying controlled cement concrete

M.200 and curing complete including the cost of

20 formwork and excluding the cost of reinforcement 39.80 CMT 6515.95 6581.11

for reinforced concrete work in (D) Columns, Pillars

posts and struts all floor (Cement Level 360 Kg)

Providing and laying controlled cement concrete

M.200 and curing complete including the cost of

21 formwork and excluding the cost of reinforcement 75.65 CMT 6468.66 6533.35

for reinforced concrete work in (C) Slab all floor

(Cement Level 360 Kg)

Providing and laying controlled cement concrete

M.200 and curing complete including the cost of

22 formwork and excluding the cost of reinforcement 7.82 CMT 6920.20 6989.4

for reinforced concrete work in (E) Staircases

including lending all floor (Cement Level 360 Kg)

Providing I.S.I. T.M.T Bars Fe.500D steel

reinfocement (ISI mark) Confirmed to IS-1786 for

23 R.C.C.work including Cutting, bending, binding and 33789.30 KG 75.46 76.21

placing in position etc. complete.For all floors

Providing 10mm thick cement plaster in single

coat on on brick/concrete walls & Ceilling & Soffit

24 of stair interior plastering in cement mortar 1:4(1 697.09 SMT 149.31 150.8

cement 4 sand) watering, curing etc. complete.For

Providing 15mm thick cement plaster in single coat

on rough or fair side of single or half brick wall for

25 interior plastering in cement mortar 1:4(1 cement 1620.15 SMT 210.42 212.52

4 sand) watering, curing etc. complete.For all

20mm thick sand faced cement plaster on walls

above ground level consisting of 12mm thick

26 backing coat of cement mortar 1:3(1 cement 3 973.47 SMT 326.03 329.29

sand) and 8mm thick finishing coat of cement

mortar 1:1(1 cement 1 sand) watering, curing

etc.complete for any Height.

Wall painting (three coats) with plastic emulsion

paint of approved brand and manufacture on

undecorated wall surface to give an even shade

27 including throughly brushing the surface free from 1172.80 SMT 134.60 135.95

mortar droppings and other foreign matter and

sand papered smooth.On Wall

Distempeing (Two coats) with oil bound washable

distemper having VOC content les than

grm/liter of approved brand and manufacture and

of required shade on wall surfaces to give an even

shade, over and including a priming coat and putty

28 with alkali resistance primer of approved brand 1950.04 SMT 71.19 71.9

after thoroughly brushing the surface and other

foreign matter and also including preparing the

surface even and sand parpered smooth As per

Approval of Engineer Incharge

Painting two coates (Including Priming coat)having

Low VOC content over new steel and other metal

surfaces with enamel paint,primar coat, brushing,

interior to give an even shade including cleaning

29 the surface of all dirt,oil, grease,dirt, dust and 266.57 SMT 99.16 100.15

other foreign matter with fine steel wood, scrapers

and sand paper with ready mixed priming paint

brushing red lead etc. complete.(As directed by

Engineer in charge)

Providing and laying 25mm thick polished Kota

stone flooring/staircase treads (two pieces with

three groves in front of steps) over 20mm

30 (average) thcik base of cement mortar 1:6 (1 101.70 SMT 967.05 976.72

cement 6 coarse sand) laid over and jointed with

grey cement slurry including curing, rubbing, and

polishing etc. complete.

Providing & fixing average 25mm thick Double

polished Kota stones for shelves in cup board,

31 seating plat form, including curing, rubbing, 23.33 SMT 789.00 796.89

polishing etc. complete. (As directed by Engineer in

Providing and laying 18 mm thick mirror polished

black granite stone machine cut in single piece

(Max. available) in sill and jambs laid over 10 mm

thick cemen mortar 1 : 3 (1 cement : 3 coarse

32 sand) and jointed with grey cement slurry with 16.50 SMT 2039.66 2060.06

matching pigment incl. rubbing and polishing half

rounding edge both side etc. complete colour and

shed as approved by architect engineer in charge.

(As directed by Engineer in charge)

providing & laying cement water proofing of

average 60mm thick for terrace for all floors using

first layer cement mortar (1:3) over an exsisting

surface second layer of arranging brick bats

acording to slop adding suitable chemical to make

water tieght & again third layer of cement mortar

33 1:3 on above including adding water proffing 275.39 SMT 348.42 351.9

compound and finishing top with net cement slury

using cement @ 2.75 kg/sq mt. making any

patterns and design on the top etc. complete as

directed.(As directed by Engineer in charge)

Providing & Laying Broken China Mosaic flooring

for plain & curve surface 12mm to 20mm of broken

piece of ceramic tiles or Glazed tiles ( one or more

colour as directed by Engg. In charge ) to be laid

over cement mortar bedding of CM 1:3 to plain or

and slopes and to be tempered to bring mortar

34 cream up to and colour pigment including rounding 291.89 SMT 739.89 747.29

of junctions and extending them pu to 15cms

along the wall and curing with bends any patterns

of designs as per deawing or directions including

cleaning with water and oxilic acid using 1 kg /

bag of water proofing materials.

Providing cement vata (10 cm X 10 cm size)

quartar round in cement mortar 1:1 including neat

35 cement finishing, watering etc. complete 201.69 RMT 23.45 23.68

Respectely plaster acitivity shall be commenced

only after completion of vata work.

Providing & fixing in position mild steel door with

ventilation frame 40x40x6 mm and shutter frame

35x35x5mm ,75x5 mm ms flate at lock rail,10 mm

square bar in vent at10 cm c/c coverd with

36 corrugated ms sheet 0.6 mm thick, including 38.60 SMT 3656.62 3693.19

applying a priming coat of read lead paint

including cleanicn the surface of all dirt, dust and

other foreign matter (As directed by Engineer in

charge& approved drawing and design etc.)

Providing & fixing in position mild steel window

with ventilation frame 35x35x5 mm and shutter

frame 25x25x5mm ,10 mm square bar grill at10

cm c/c coverd with corrugated ms sheet 0.6 mm

37 thick,including applying a priming coat of read lead 24.75 SMT 4060.70 4101.31

paint including cleanicn the surface of all dirt, dust

and other foreign matter (As directed by Engineer

in charge& approved drawing and design etc.)

Providing and fixing window having extruded

aluminum Colour Powder Coated section frame

main outer size 63.50 x 38.10 x 1.95 mm(of Jindal

Section no:4605,@ Wt 1.094 Kg / Rmt), horizontal

two track member size 61.85 mm x 31.75 mm x

1.20mm (of Jindal Section no: 8687 @ wt.of

Kg/mt), vertical member of size 61.85 mm x

31.75mm x 1.30 mm (of Jindal Section no:8758 @

wt.of 0.0.659 Kg/mt) with sliding shutters of

horizontal member size 40mm x 18mm x 1.29mm

38 (of Jindal Section no:8949 @ wt.of 0.456Kg/mt), 24.75 SMT 1696.73 1713.7

vertical member of size 40mm x 18mm x 1.29mm

(of Jindal Section no:8947 @ wt.of 0.456Kg/mt/

Section 8948, @ Wt. 0.457 Kg/mt) with 5 mm

thick transparent bronze colour tinted float glass

with powder coated aluminum fittings and fixtures

and transparent silicon sealant glass fixing to

frame as per details etc complete for window.

Steel work, M.S Grill, welded in built up sections

framed work including cutting, hoisting, fixing in

position and applying a priming coat of read lead

39 paint. (A)In beams and joists, channels angles 2917.82 Kg 89.58 90.48

Tees, flats, with connecting plates or angle cleats

as in main and cross beams. Hip and jack rafters,

purlins conneted to common rafters and the like

Providing & fixing G.I rain water Spout of 65mm

dia and 60cm length.

Painting of logo on front side wall as directed by

41 Engineer in charge and as per approved drawing. 4.50 SMT 422.53 426.76

Providing and fixing Chicken mesh jali (22 gauge)

15cm wide at the junction of 2 different surfaces of

different material component at the time of

42 plastering to prevent cracking in plaster surface as 695.15 RMT 38.39 38.77

and where directed at all floors with all leads and

lifts etc.complete.

Providing & Fixing Green board(2400mm x

1200mm) with soft board(1200mm x 1200mm) on

wall as per the drawing & design etc. complete.

Providing and Fixing 5mm thick Acrylic Name Plate

for dark zink glare with braille lippi and fixing with

44 double sided bonding tap and screws as per 5.00 No 480.00 484.8

direction of Engineer in charge of Size having 12'.

X 4 ' etc. compl.

Providing and laying tactile tile (for vision impaired

persons as per standards) of size 300x300x15 mm

having with water absorption less than 0.5% and

conforming to IS:15622 of approved make in all

colours and shades in for outdoor floors such as

45 footpath, court yard, multi modals location etc., 13.19 SMT 1831.90 1850.22

laid on 20mm thick base of cement mortar 1:4 (1

cement : 4 coarse sand) in all shapes & patterns

including grouting the joints with white cement

mixed with matching pigments etc. complete as

per direction of Engineer-in-Charge.

Providing & fixing to wall ceiling and floor 6.0 kg

F/cm2 working pressure PVC pipes of the following

46 out side dia. Special density complete with special 43.70 RMT 575.00 580.75

flange compression type fitting,wall clips etc.

including making good the wall ceiling and

floor.(G) 160 mm dia

Providing and fixing to wall ceiling and floor

Kg. F/Cm2 working pressure poluthene pipes of

the following outside Dia. Low densidy, complete

47 with special falnge compression type fittings, wall 74.40 RMT 332.91 336.24

clipsetc. including making good the wall ceiling and

floor.(G)110 mm

Providing and laying polished kota stone slab

25mm thick in risers of steps,skirting Dedo and

pillars laid on 10mm thick cement mortar 1:3 (1-

48 Cement : 3 coarse sand) and jointed with gray 10.10 SMT 1110.38 1121.48

cement slury mixed with pigment to match the

shade of slab including rubbing and polishing etc.

Providing and laying Vitrified tiles 8 to 10 mm thick

, 24'' x 24'' in flooring treads of steps and landing

49 laid on a bed of 12mm thick cement mortar 1:3 (1- 491.48 SMT 1062.50 1073.13

cement : 3-coarse sand ) finishing with flush

pointing in white cement

Providing and laying Vitrified tiles 8 to 10 mm thick

, 24'' x 24'' in skrting risers of steps and dedo on

50 10mm thick cement plaster 1:3 (1-cement : 3- 49.14 SMT 1130.15 1141.45

coarse sand) and jointed with white cement slurry

Point wiring for Light / Bell with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch /

bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden

51 box, single mounting base frame covered with 30.00 Nos 493.89 498.83

textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected,

with necessary Lamp holder/ceiling rose /

H.D.Connector as directed. (a) with medium class

Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (Green) both are of .ISI marked

1.1 KV Grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of

pipe erected with 6A Modular type switch and

hum free EME four or more step type electronic

fan regulator with separately mounted and

accessories with earth continuity of following type

52 erected on PVC / Metallic/Wooden box, single 30.00 Nos 705.99 713.05

mounting base frame covered with

textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected.

with necessary ceiling rose / H.D.Connector as

directed. (a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling

complete Cat. III

Point wiring for Individual Plug with & earth wire

of 1.5 sq.mm (Green) both are of ISI marked

KV grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length, in below type of pipe

erected complete with Modular type switch &

pin Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules

53 erected on / in wall / ceiling as per pipe erected 10.00 Nos 524.19 529.43

with following type of accessories. [I] For 6A Plug

and 6 a switch with 2-1.5 sq.mm Cu. Wire from

nearby switchboard/mcb db board (a) with

medium class Rigid PVC pipe and accessories

erected flushed on wall/ceiling complete Cat. III

Point wiring for Individual Plug with & earth wire

of 1.5 sq.mm (Green) both are of ISI marked

KV grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length, in below type of pipe

erected complete with Modular type switch &

pin Plug erected on PVC / Metallic/Wooden box

54 covered with appropriate front plate modules 5.00 Nos 788.81 796.7

erected on / in wall / ceiling as per pipe erected

with following type of accessories.[II] For 16A Plug

and 16 amp switch with 2-2.5 sq.mm Cu. Wire

from mcb db board. (a) with medium class Rigid

PVC pipe and accessories erected flushed on

wall/ceiling complete Cat. III

Point wiring for on board Looped Plug with 6A

Modular type switch & 5 pin socket erected on PVC

/ Metallic/Wooden box, single mounting base

55 frame covered with textured / metallic/white front 20.00 Nos 283.81 286.65

plate modules erected on / in wall / ceiling with

following type accessories Cat. III

Providing following type of Modular Type

Accessories mounted with PVC / metallic/Wooden

box, single mounting base frame covered with

56 textured / metallic/white front plate , modules 5.00 Nos 224.22 226.46

erected with necessary connections as per site

situation directed by Engineer In charge (10)

6/16Amp. Universal socket Cat.III

Providing following type of Modular Type

Accessories mounted with PVC / metallic/Wooden

box, single mounting base frame covered with

57 textured / metallic/white front plate , modules 20.00 Nos 28.28 28.56

erected with necessary connections as per site

situation directed by Engineer In charge. (7) Blank

Plate Single Cat.III

Providing and erecting ISI mark embossed Medium

class RIGID PVC PIPES (F.R.L.S.)of following size

complete to be erected on/in wall or ceiling

58 erected with necessary PVC fittings & Junction 250.00 RMT 26.26 26.52

boxes fixed with adhesive solution & Clamps with

following dia of pipes, in approved manner as

directed (a) 20 mm

Providing and erecting ISI mark embossed Medium

class RIGID PVC PIPES (F.R.L.S.) of following size

complete to be erected on/in wall or ceiling

59 erected with necessary PVC fittings & Junction 75.00 RMT 36.36 36.72

boxes fixed with adhesive solution & Clamps with

following dia of pipes, in approved manner as

directed (b) 25 mm

Providing & erecting PVC Corrugated Flexible

Conduit with required nos. of coupling, PVC

bushes, Check-nuts etc. complete of following

sizes.(2) 25 mm

Providing and erecting Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with

61 1.5 sq. mm copper conductor FRLS PVC insulated 150.00 RMT 68.68 69.37

stranded wire of green colour for earth continuity

of following size (A) with medium class Rigid PVC

pipe and accessories (b) 2 wire 1.5 sq. Mm

Providing and erecting Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with

62 1.5 sq. mm copper conductor FRLS PVC insulated 300.00 RMT 90.90 91.81

stranded wire of green colour for earth continuity

of following size (A) with medium class Rigid PVC

pipe and accessories (b) 2 wire 2.5 sq. Mm

providing and erecting Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm

63 copper conductor FRLS PVC insulated stranded 100.00 RMT 124.23 125.47

wire of green colour for earth continuity of

following size A) with medium class Rigid PVC pipe

and accessories (a) 2 wire 4 sq. Mm

providing and erecting Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm

64 copper conductor FRLS PVC insulated stranded 50.00 RMT 163.62 165.26

wire of green colour for earth continuity of

following size (A) with medium class Rigid PVC

pipe and accessories (b) 2 wire 6 sq. Mm

providing and erecting Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm

65 copper conductor FRLS PVC insulated stranded 50.00 RMT 202.00 204.02

wire of green colour for earth continuity of

following size (A) with medium class Rigid PVC

pipe and accessories (g) 4 wire 4 sq. Mm

Providing & erecting Switch board for Computer

or electric apparatus consisting of following

modular type accessories mounted with PVC /

Metallic concealed/open box with single mounting

base frame covered with textured/metallic /white

66 front plate,modules erected with necessary 6.00 Nos 1274.62 1287.37

connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type

Accessories Cat. III

Decorative call bell Ting-tong box type 250 volts

complete erected

Supplying and erecting LED indoor fittings with

LEDs of wattage 0.2 Watt to 0.5 Watt assembled

on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to

IS: 513/CRCA/ aluminium die cast powder coated

and high U.V. & corrosion resistance with diffuser

with company mark/name 160V to 270V, Power

Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

68 Luminaire efficacy> 85 lumens/watt ,LED 30.00 Nos 348.45 351.93

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Tube Light with

integral driver (c) 18-20 Watts, Surge - 2KV,IP-20,

Supplying and erecting led lamps with following

wattage capacity of 220 to 240 voltage, minimum

15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting

69 suitable for E14 / E27 / B22 lamp holders, pf >= 12.00 Nos 131.30 132.61

0.5 (B) LED Lamps integral type, with PC diffuser

suitable LAMP holder(b) 5 to 8 watts Cat-lll

Supplying and erecting LED Solar street lights with

High power White LEDs wattage of 1Watt and

above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure

die cast aluminum housing with smooth finish

powder coated and heat sink extruded aluminium

with diffuser and Polycarbonate optics/ lenses with

70 company mark/name engraved or embossed 14.00 Nos 21331.20 21544.51

with 36 hours battery backup & MPPT 24V,7.5 A

charge controller with 12 hours automatic switch

on/off with wind speed resistance 44 m/s as per

(B) 15W, IP-65, PV Module – 80W and 4 mtr poles

complete erected

providing and erecting Miniature circuit breaker

single pole 6A to 25A suitable to operate on 240 V

71 A.C. system and having breaking capacity 10 KA 10.00 Nos 131.30 132.61

to be erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat.III

Providing & erecting 240 V MCB double pole switch

for motor & inductive load (C Curve) having

72 KA breaking capacity & confirms to IS : 8828 in 9.00 Nos 353.50 357.04

existing box having following capacity (A) 6 to

Sheets steel powder coated enclosure suitable for

incorporating One/Two nos. MCB.

Providing and erecting metallic vitrified danger

notice board as per language suggested by

engineer incharge for MEDIUM VOLTAGE

installation to be erected as per IS-2551.

Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having

200-250 Micron galvanising, connection terminal

dia of 12mm with constant ohmic value

surrounded by highly conductive compound with

high charge dissipation suitable for following type

of applications with chamber and heavy duty

cover.(approved make OEM has to submit test

certificate) & having back filling compound of (B)

Inner chemical (CCM Compound)- Resistivity:-

drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for

long time Necessary test report must be

submitted. (b)For Electrical installation up to 11 KV

in normal soil.

Length of Pipe : 2.00 mtrs

Back filling Compound :1 no. Bag of 25 Kg.

Supplying & erecting XLPE(IS:7098)(I)-88 ISI

unarmoured copper cable 1.1 KV grade to be

erected as directed of following size. (L) 4 core

Providing & erecting Approved make Power Saving

50 Watt Ceiling Fan with double ball bearing ISI

mark with Condenser 230 volt A.C. 50 Hz

77 mm sweep complete having 3blades with 30.00 Nos 2297.75 2320.73

aluminium blades with , canopy & 30 cm. down

rod erected with 3 core flexible wire with

earthing.(Make shall be approved by Engineer in

Supplying & erecting Fan Hook of 10 mm M.S.

78 Round bar grouted in RCC slab with Making the 30.00 Nos 50.50 51.01

site as original.

Miscellaneous contigencess for any work not

specified in tender or any excess in specified items

79 if required during execution of work as per 1.00 JOB 500000 505000

instruction opf EIC. (Rates shall be decided from

lowest of 3 quotations and shall be approved by

EIC before carrying out work)

consultancy 3% if required Carrying out structural

design including required testing and getting BUC

approval from govt. /local authority including

preparation plan and submision of proposal to

govt. /local authority for getting permission etc.

complete as per EIC . (@3% of total cost)

Total Amount in Rs.

Total Amount in Rs.

"All royalties, toll tax, local tax, development charges, and any other taxes etc., in respect of this contract and also any

statutory variation in future towards above mentioned taxes & any other taxes if levied in future by statutory authority

applicable to the this contract shall be payable by the con-tractor and DGVCL will not entertain any claim whatsoever in this

The Contractor has to pay 1% Labour Welfare Cess of Bill amount to the concern Government Department.

The contractor shall also produce the receipt of payment of 1% welfare cess from the respective Govt., Department.

The proof of payment made by the contractor to the appropriate department shall be submitted to DGVCL, failing which

appropriate amount shall be withheld on getting information/instruction from the concerned department.

Addl. Chief Engineer (P)