EXTERNAL PAINTING TO WAR CENTRE COMPLEX UNDER THE AREA OF AGE BR II OF GE ARMY CENTRAL JODHPUR (8928/E8)

Amount

Demolition of RCC as in Downward fascia , Roof projectios, sunshades, chajja etc suspended roof slab railings etc ,complete all as specified and as directed.

Mild steel framed work as in brackets & supports for sunshades roof slabs etc railings etc using MS angle iron, sq pipes flat iron nuts & bolts etc complete all as specified & directed incl necessary welding etc. ,complete all as specified and as directed.

Preparation of new steel surfaces & applying 2 coats of syn enamel paint over a coat red oxide primer ,complete all as specified and as directed.

Taking down carefully cement conc /spalled out concrete from RCC roof projections, cilinigs ,sunsheds, beams, etc upto cover depth by chipping out lightly including necessary scafolding etc ,complete all as specified and as directed.

TMT bars 12 mm dia fixed by way of stitching ( welding ot tieing with existing reinf) incl drilling holes etc & securing ends in walls etc ,complete all as specified and as directed.

Cleaning the existing reinf of slabs , chajjas etc & applying a coat of SIKA RUSTOFF 11 to remove the loose rust particles etc & throughly cleaning the surface.,complete all as specified and as directed.

Applying a coat of bond coat made with cement slurry (1 part cement to 1.5 -2 parts water) mixed with admixture LATEX POWER mixed @5 Kg per 50 kg of cement & applying to the conc surfaces @ 200 gm/sqm to obtain tack.,complete all as specified and as directed.

15 -20 mm thick rendering in CM (1:1:2) using1 part of cement 1 part 2-3 mm screenings of stone agg & 2 parts coarse sand over the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & rough to receive final rendering coat. ,complete all as specified and as directed.

5 mm thick rendering in CM 1:3 & finishing the surface even & smooth w/o using extra cement ,complete all as specified and as directed.

MS hard drawn steel wire fabric cut to length, bent to shape & fixed in reinforcement to slabs cut n. exc. 400 Kg/Sqm fixed with nails etc on underside of RCC slabs etc complete all as directed at site.(for slab portion). ,complete all as specified and as directed.

10-15 mm thick rendering in CM 1:3 over the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & smooth complete all as directed at site ,complete all as specified and as directed.

GI chicken wire mesh of 0.71 mm dia wire & 12 mm mesh size fixed with nails & screws around RCC chajjas/fascias etc,complete all as specified and as directed.

Two coats of cement base paint on new plastered surfaces of walls incl preparation of new surfaces over a coat of primer,complete all as specified and as directed.

40mm thick sand stone fixed to angle iron frame as in sunshade with the help of nut bolts and one end fixed in stone wall with desired slope including PCC (1:2:4) type B0 coping complete all as specified and directed.

Preparation of new plasteresd ceiling surfaces & applying three coats of white wash ,complete all as specified and as directed.

Preparation of old surfaces and applying one coat of cement base paint over old surface of walls chajjas ,fascias roof projection ,complete all as specified and as directed.

Preparation of old surfaces by Brooming down or steel wire brushing, scrapping down moulds, moss and efflorescent salts and trading oil & greasy spots, to wall including cornices etc plaster or un- plastered surfaces (old decorated surface) and M&L for applying one coat of white wash on wall surfaces all as specified and as directed Engineer-in Charge.

All as per Sl item No 17 above but on surfaces of ceiling

Preparation of old surfaces of walls by brooming down or steel wire brushing, scrapping down mould , moss and efflorescent salts and trading oil & greasy spots. to wall including cornices etc plaster or un plastered surface (Old decorated surfaces) and M&L for applying one coat of plastic emlulson paint all as specified and as directed by Engr-in-Charge..

-ditto- all as atem No 19 above but on ceiling

Preparation of old surfaces by Brooming down or steel wire brushing, scrapping down mass and efflorescent salts and trading oil & greasy spots, washing rubbing down and stopping distempered surfaces and M&L for applying one coat of oil bound distemper (of approved quality & tint) on walls as spd and as directed Engineer-in Charge.

-ditto- all as atem No 21 above but on ceiling

Preparation of old painted wooden surfaces of any description over 10cm width or girth and M&L for applying one coat of synthetic enamel paint (FIRST QUALITY) of any tint all as spd and directed by Engr-in-Charges.

Preparation of old painted steel surfaces of any description over 10cm width or girth and M&L for applying one coat of synthetic enamel paint (First quality) of any tint all as spd and directed by Engr-in-Charge.

Preparation of old wooden polished surfaces of any description, width or girth including a coat of wood filler and M&L for applying one or more coat of French polish all as spd and directed.

Preparation of old external wall surfaces by Brooming down or steel wire brushing, scrapping down mass and efflorescent salts and trading oil & greasy spots, washing rubbing down and stopping distempered surfaces and M&L for applying one coat of exterior acrylic emulsion (apex or equivalent) of approved quality & tint on walls as spd and as directed Engineer-in Charge.

Comlete removal of existing treatment from walls ceilings etc & washing down with water etc complete

Preparation of newly plastered surfaces or surfaces from which existing treatment has been completely removed & applying one coat of birla /JK wall putty , sand papering the same & making good to depressions if any to obtain totally smooth surfaces all as directed

Preparation of newly plastered external surfaces or external surfaces from which existing treatment has been completely removed & applying one coat of external grade birla /JK wall putty (Oil Base) , sand papering the same & making good to depressions if any to obtain totally smooth surfaces all as directed

Preparation of new plastered surfaces or or surfaces from which existing treatment has been completely removed & applying one coat of POP layer not less than 2 mm tickness sand papering the same & making good to depressions by applying additional POP layer if required to obtain totally smooth surfaces all as directed

Prefabricated, pre reinforced, 100 to 125 mm wide POP moulded cornices/moulding fixed on ceiling/wall complete all as specified and directed.

Prefabricated, pre reinforced, 600mm dia POP moulded desiner circle dooms fixed on ceiling/wall ,complete all as specified and directed

Prefabricated POP strips nexc 50mm wide & nexc 40 mm in thickness fixed to RCC ceiling surfaces with suitable adhesive/POP glue fixed to patterns all as specified & directed incl mitring at joints etc,complete all as specified and directed

Taking down cement or cement lime plaster any description and in any position including raking out joint hacking out for key & scrubbing with water etc,complete all as specified and directed

Rendering 15mm thick in CM (1:6) on stone surfaces finished even & smooth without using extra cement ,complete all as specified and directed

10 mm thick rendering in CM 1:3 as in ceiling finished even & smooth

Preparation of new plastered surface and applying three coat of whtie wash on ceiling after ,complete all as specified and as directed.

Preparation of new plastered surface and applying two coats of oil bound distemper of one or different tints over putty applied surfaces of walls all as specified and directed by Engr-in-Charge

Preparation of new plastered surface and applying two coats of acrylic emulsion of one or different tints over putty applied surfaces of walls all as specified and directed by Engr-in-Charge

Preparation of surface and applying two coats of exterior acrylic emulsion (Apex ultima or equivalent) of one or different tints over putty applied surfaces of walls all as specified and directed by Engr-in-Charge

Preparation of old surfaces of walls by Brooming down or steel wire brushing , scrapping down moulds, moss and efflorescent salts and trading oil & gresy spots, to wall including ccornices etc plaster or unplastered surfaces (Old decorated surfaces) and M&L for applying one coat of cement based paint on external surfaces all as specifiedand as diected by Engr-in-Charge.

Preparation of old surfaces of walls by Brooming down or steel wire brushing , scrapping down moulds, moss and efflorescent salts and trading oil & gresy spots, to wall including ccornices etc plaster or unplastered surfaces (Old decorated surfaces) and M&L for applying two coat of cement based paint on external surfaces all as specifiedand as diected by Engr-in-Charge.

M&L for prep of old external texture /spray plaster surfaces & applying a coat of suitable exterior acrylic paint of approved make & tint all as specified & directed .

Providing textured finishing of desired pattern ,colour and shade on walls as per Berger Illusions Catalouge ( Gooves ,Crush , Rush,Spatulato ,Twirls ,Techno , metallic, marble customisation achieved through special application tools ) over the base coat all as per manufactureres instructions & including scrapping of old textured roller/bubble finish, preparing the base, priming coat etc. complete as per directions of Engineer-in-charge:

M&L for carrying out external texture wall finishes exterior grade over surfaces of walls , RCC chajjas fascias roof projection etc of approved pattern ( Top Gun Compact / Stucco / Pirahna shade/pattern ) of Make Castle Paints or equivalent incl preparing the old surfaces making good to depressions etc with a coat of putty etc complete to obtain the desired finish all as per sample

Hydraulic door closer universal type Door closer hydraulically regulated, designation No. 3,universal type, aluminium extruded section all as specified & directed

EWC complete set constellationdual flush (WB consetellation 5 ped constellation, EWC constellation, cist & lid CON dual flush, seat cover constellation, cistern fitting(water saver-dual flush) etc complete Make hindware Cat 21038 or equivalnet of specified make.

6 mm thick bevelled edges high quality looking mirror fancy type fixed to wall with chromium plated screw with cup washers etc complete all as specified and as directed

Decorative type curtain rod stainless steel finish MS pipe 22 to 25 mm dia as per sample superior quality complete

Purpose made brackets trade pattern for decorative type curtain rods suitable for holding 22 to 25 mm dia as per sample as in repairs.

Decorative fincals (round type with mirror optic finish) trade pattern for decorative type curtain rods suitable for 22 to 25 mm dia curtain rods as per sample as in repairs

MS chromium plated peg set of five fixing with wall complete

600mm long 12-15 mm dia Cromium Plated MS Towel rail fixed as in repairs Make:- Jaquar

CP stainless steel fancy type Towel Rack with lower hanger & hooks Make Jaquar AHS 1581 H

Round towel Ring CP Stainless steel :-Make Jaquar AQN 7721

Toilet paper holder with Flap :-Make Jaquar ACN 1153N

Taking up or down steel tubing 15mm and connections, including removing from site.

Taking up or down steel tubing 25mm and connections, including removing from site.

GI tubing medium grade 15 mm fixed complete to walls, ceiling or in floors concealed incl cutting chase in walls /floors complete girth nexc 10 cm girth

GI tubing medium grade 25 mm fixed complete to walls, ceilings or in floors etc., any type of pipe

Gun metal gate valve 25mm dia, cast copper alloy screwed pressure with crutch or butterfly handle, screwed both ends for iron pipe for unions and fixed as in repairs

15mm bore CP brass bib cock screwed for iron pipe or ferrule and fixed complete all as specified and directed Make Jaquar Cat No QQT-7037

15mm bore CP brass angular stop cock screwed for iron pipe or ferrule and fixed complete all as specified and directed Make :-Jaquar Cat No QQT-7053

15mm bore CP central hole basin mixer popup waste system with 450mm long copper pipe and brass nuts ISI Marked Make:- Jaquar Cat No 7167B

CP wall mixture 3 in-1 system includingr 1.50m long tele shower and overhead shower of size 150x150mm with W.F. ISI Marked Make :-jaquar Cat No 7281

over head Shower rose 150x150 mm of ABS Body chrome plated with grey face plate & with arm having swivel joint cromium plated best quality Make Jaquar /CERA

15 mm bore CP cast copper alloy body mixer sink cock with hot & cold mixing valves & casted central spout all as per sample Make JAQUAR

15mm bore CP brass cocealed stop cock with adjustable wall flange screwed for iron pipe or ferrule and fixed complete all as specified and directed Make Jaquar Cat No QQT-7083

Health foucet with 1200mm long flexible mild steel tube 80mm dia with wall hook and complete all as specified and as directed and approved by Engineer-in-Charge. Make :-Jaquar ALD-573 /CERA

Two way angle cock cromium plated fancy type 15 mm bore /size Make:-JAQUAR /CERA

Two way Bib cock cromium plated fancy type 15 mm bore /size Make :-JAQUAR /CERA

Demolition of PCC as in flooring, plinth protection etc n. exc. 15 cm thick complete.

Roughening of existing conc floors by picking sweeping clean & washing down with water to remove dust & brushing neat cement slurry with 3.0kg/sqm ,complete all as specified and as directed.

20 mm thick PCC 1:2:4 type Bo using 12.5 mm graded stone agg as in bedding layer to floor tiles complete incl finishing the surface even & rough to receive screeding .,complete all as specified and as directed.

15 mm thick screeding in CM1:4 mixed finished even & rough to receive tiling/floor finish.,complete all as specified and as directed.

10 mm thick rendering in CM 1:3 over stone masonry surfaces & finishing even & rough to receive tiling complete all as specified & directed.

Light coloured Virified Ceramic tiles 9-10 mm thick area of each tiles not exc 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match,complete all as specified and as directed.

Dark coloured Virified Ceramic tiles 9-10 mm thick (ist quality) area of each tiles not exc 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match,complete all as specified and as directed.

Joint free coloured Non - skid Ceramic tilesI( ist quality) size of each tile not less than 300x300 mm 7 to 8 mm thick (square/ rectangular) in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match,complete all as specified and as directed.

Glazed ceramic Joint free colour tiles of size between 350x200 to 450x350 7mm thick, of approved design as in Dados floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.

Taking down of steel windows/vents with all fittings complete carefully & removal away from store

M&L for fabrication of powder coated aluminium frame work as in frames for aluminium windows with or without rebate or for sliding windows(two track/three track ) , ventilators etc with louvers having suitable mechanism for tilting , U shaped fillets for securing Jallies etc & the likes complete all as per sample kept in GE Office & fixed in position complete all as directed Note : Glass panes in louvers & stainless steel wire cloth shall be measured & paid for seperately,

Pre- powder coated aluminium decogrill all as per sample fixed to aluminium framework of windows & ventilators,complete all as specified and as directed.

Pre powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified all as directed & specified

Pre powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) ,complete all as specified and as directed.

4.80 mm thick plain Sheet glass tinted , ordinary quality and glazing withsecured in wooden beads or snap fit glazinng clips square exc 0.5 sq. m in each pane,complete all as specified and as directed.

4 mm thick pin headed figured glass in small widths as in louvers of ventilators complete all as directed.

Stainless steel wire cloth 0.36 mm nominal dia of wire & avg width of appertuer 1.40 mm fixed to Anodised aliminium framework of windows / vents ,complete all as specified and as directed.

Demolition of stone salbs tiles etc of any description laid bedded & jointed & pointed in CM,complete all as specified and as directed.

15-18 mm thick udaipur green marble stone in one piece as in treads to steps , cills , landings etc laid over 15 mm thick cement sand screed in CM 1:4 incl mirror polishing ,complete all as specified and as directed.

15-18 mm thick Yellow Jaislmer stone as in risers/skirtings etc laid over 10 mm thick rendering in CM 1:3 complete incl mirror polishing ,complete all as specified and as directed.

18-20 mm thick Black granite stone as in cooking platforms , slabs for oval type WHB,sinks etc & the likes complete laid over 15 mm thick cement sand screed in CM 1:4 incl mirror polishing complete & providing necessary holes for gas pipe / water supply pipes etc ,complete all as specified and as directed.

Rounding of the edges of stone slabs as in cooking platforms , treads of steps shelves & cills etc all as directed at site.

Note for all above items:All items in BOQ are for"Materials and labour /Supply and fix" and to be executed in "Repairs i.e incl takng down old material" unless otherwise specifically mentioned as "Supply only" or "fixing only" in BOQ. Contractors are required to quote their rates accordingly.

BEYLIM INFRA

mahalaxmi enterprises

M.A. MUNSHI AND CO.