Providing re-electrification in the Boat club in Kowdiar ward under city Corporation Thiruvananthapuram.

Amount

Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).

90.2.1.1. Single Control light point with 6A, plate 3 plate ceiling

90.2.1.3. Single control light point with out ceiling rose

90.2.1.6. Combined plug point with 6 A, 5 pin plug socket controlled by 6 A switch in the same switch board as that of light points.

90.3.20.3Supply & installation of light fittings on TW round block Supply, conveyance installation testing and commissioning the light fittings of following types made of CRCA with 0.5mm thickness complete with all accessories and lamps etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required. 1200 mm 1X20W LED Lamp with box type fixture

Supply conveyance, installation, testing and commissioning wall mounting fan of the following size using mounting brackets supplied along with the fan and giving connections with existing wire

MR 1193 400 mm sweep

Supply, conveyance and erection of the following sizes of 'B' class GI pipe in single section for post top lantern of all types on concrete base (excluding charges for concrete base and excavation) and painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer etc. as required.

Earth work excavation in hard soil and depositing with a lead up to 50 m and llift up to 1.50 m including neat banking

Cement concrete 1:2:4 using 20 mm (normal size) broken stone for reinforced concrete work

Supply and installation of Hensel make IP 65 terminal junction box for termination 1.50 sq mm 3 core cable for street light post.

Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.

3 core 1.50 sq mm

90.12.1.40 Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).

4 core 10 sq mm

90.12.7.40 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.

4 core 10 sq mm

Supply, conveyence, installation, testing and commissioning of Yard light Philips BRP 320 x24W LED / equivlent make fitting on the existing GI pipe and giving connection with 16/20 mm 3 core round copper conductor flex wire or with extended original wiring etc. as required.

Garden lamp fitting in the existing pipe and giving connection (LBLSR 10W)

1.23.3. Supplying and fixing following piano type switch / socket on the existing switch box/ cover including connections etc. as required. 15/16 am switch

1.23.5 Supplying and fixing following piano type switch / socket on the existing switch box/ cover including connections etc. as required. 6 PIN 15/16 Socket outlet

1.27.3 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 4 module (125 x 75 mm)

1.21.1 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 20 sq mm

90.6.4.12. Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes. 1.50 sq.mm 2 Run

2.3.4. Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator 16 way, Double door

2.10.1.Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

2.13.3. Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps

2.14.3. Supplying and fixing following rating, 2 pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps

5.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required

Supply and laying bare copper conductors of the following sizes laid 0.6 m below ground level including excating trench of suitable size and refilling etc. as required. (inordinary soil) 3.15 mm copper conductor (10 SWG)

Supply and drawing bare copper conductors of the following sizes along with wiring cables and giving connections etc as required. 2.00 mm copper conductor (10 SWG)

Supply and drawing bare copper conductors of the following sizes along with wiring cables and giving connections etc as required. 3.15 mm copper conductor (10 SWG)

Supply and providing the following sized of bolt and nut with washers on the existing MS box / earth bus etc

25 x 6 mm brass bolt and nut

25 x 3 mm brass bolt and nut

Supply of supperior quality copper earth socket for the following sizes of earth conductor including crimping etc. as required.

2.00 mm (14 SWG)

3.15 mm (14 SWG)

Fabrication, supply & installation of dust and vermin proof, wall mounting, thermoplastic meter box of following size suitable for fixing KSEB meter, fuse units, CT etc, hinged door construction for the front side with compartments if necessary, providing vision panel for the meter compartment, knock out for cable entry and exit. 450 x300 x214 mm

S & F switch disconnector unit (isolator) complete with handle assmebly, door inter lock and padlocking arrangement of the following ratings

32 A DP SDF

Amount remitted to KSEB for regularising the additiona load (The actual amount will be reimbursedon production of original receipts)

Supply and fixing the following accessories in the existing meter board and giving connections etc. 32 A 415 V DIN type fuse base

32A, 415 V, DIN type fuse base

32A, 415 V, DIN backelite fuse fitting

32A, 415 V, DIN 2 way neutral link mounted on DMC/SMC base

S RADHAKUMAR

SYNERGY POWER TECH